Watch me get so fixated on a subject or project that I obsess over it (getting stuck in a waffle square). Instead of my mind being capable of multitasking like a bowl of noodles, I get stuck in an individual waffle square.
Hi Mike, great video with details which is refreshing. Your vehicle lift is very interesting what make and mode is it, I'm looking for something similar, did you or does it have dogs location for the Chassis, is it a Quick Jack, keep up the good work Dan LR4
@wafflesquare9 сағат бұрын
Yes it is a Quickjack and the link is in the description of every video where I use it.
@eizuke130917 сағат бұрын
Do I need to pay more on program if after I bought it ?
@wafflesquare9 сағат бұрын
Your grammar doesn’t make sense so I don’t know what you are asking. You only have to pay for additional add-ons like Ford, Nissan, Honda, etc. the built-in functionality is updatable for free.
@peterallmand521617 сағат бұрын
A great video. It has been a great help removing a front seat from my Range Rover Sport 320. Basically the same vehicle as the LR3.
@wafflesquare9 сағат бұрын
I’m so glad it was helpful.
@jamesray3920Күн бұрын
I bought a 2017 Mercedes-Benz 170 sprinter 3.0 cargo van to build into a camper living quarters. My van has 300k on the mileage runs. Excellent diesel is designed to handle high mileage as I am a truck driver. My work truck has almost 3 million on my caterpillar engine . One main reason I chose Mercedes-Benz is rear wheel drive, and the under coating is excellent by Mercedes-Benz , I also bought a 04 land rover discovery ll also a excellent suv for overlanding no air suspension very easy to lift , I only gave 4300 for my van off of copart lots of good deals if tour timing good, everyone biggest issue in life is time this year I go to level 6 in life time is the problem with too many projects I'm planning to sell my home in near future debt the only things keeps us all working, as some people pay 60k to 200k for a mercedes-benz van unbelievable I got mine I build out myself all in probably 40k due to things costing so much like aluminum front and rear bumber roof racks , flare side, I already have my dometic ac. max air fan , lithium batteries by renogy and solar panels, Truman heater , and a few more things to start. As I said, time is everyone issue and money . Ram has one thing over Mercedes-Benz. It's wider, but I'm no fan of the front wheel drive. I go check out your other channel
@jim99ful2 күн бұрын
thanks, you took some of the pain out of a new install 🙂
@wafflesquare2 күн бұрын
You are very welcome. I’m so glad it was helpful!
@ramonmcgee22403 күн бұрын
This is a fantastic series of explanatory videos. The explanations are clear and concise and you demonstrate each phase of the inspections and repairs in a manner which is easy to follow and understand. Very well done.
@wafflesquare3 күн бұрын
Ramon thank you so much!
@fortis62153 күн бұрын
Excellent review… Thanks!
@wafflesquare3 күн бұрын
You are very welcome.
@younis7514 күн бұрын
more than 3 time i saw your video
@younis7514 күн бұрын
yes i like you video thank you 😃
@wafflesquare4 күн бұрын
You’re very welcome
@MarzMeza5 күн бұрын
if only u put rurron in brackets u would have got more views
@wafflesquare5 күн бұрын
Great suggestion. I was quite surprised how little interest there was in this series.
@mashworthful9 күн бұрын
Any thoughts on alternate paint options for hood and top.
@wafflesquare9 күн бұрын
We are getting the exterior painted a custom color.
@TreatsOnTheStreets10 күн бұрын
Did you get any transmission faults while going through the fill procedure?
@wafflesquare10 күн бұрын
No
@mohammedsahalps808911 күн бұрын
Hi Mike, I needed your help I am having issue starting LR3 2005 4.4L v8 petrol model. Sometimes the car is not starting no crack at all (3 times it started when connected with external Battery charger , battery charged fully and clearing codes) and it will operate without any issues for some days and the same issue repeats. The thing is that same setup is not working always and I observed security red light is still blinking when key is inserted while having issue. When the key is reading I was able to program 2 more keys with JLR Mangoose cable. This keys also not operational while having issue. I have already changed battery with 92ah agm battery. Confirmed key is having correct program. So I am suspecting immobiliser system something issue.Please take time create content on key immobilizer issues so that I can clear the issue
@wafflesquare14 күн бұрын
I have reached out to the company who makes the Launch Elite tool and asked them to reply to the many questions in the comments above my knowledge level as well as address issues with the key FOB programming and height calibration failing to work.
@itsjrbmark548514 күн бұрын
Thank you So much....much I've learned i helped my uncle on his LR D3...and now its driving more smoothly...all the way from Namibia.
@wafflesquare14 күн бұрын
You are very welcome!! I’m so glad it was helpful!
@UptownFights15 күн бұрын
So I have an issue. My rear suspension is staying raised and one come down. Is it the rear valve blocks responsibility to vent the suspension or is it the central valve block or is it the compressors rear galley vent on back of that or is the filters plugged on compressor? My compressors newer amazon one. Went off roading, and rear locked up high. Won't vent gallery.
@wafflesquare15 күн бұрын
Have you tested the ride height sensors?
@UptownFights15 күн бұрын
@wafflesquare Only code I get is Problem venting gallery, and then yellow light. I clear it, and hear one short squart of air venting and light again. Rear right sensors is reading 2 inches higher then left. I'm going to try taking off the sensor arm and see if it goes down. Sensor is good im sure. Was poking your knowledge on venting.
@jeffnewman758717 күн бұрын
Mike!!!!!!! You are the boss! This worked perfectly for me. I have a 2005 LR3 and used this video with your instructions to a tee. The only thing I couldn't install was the parking brake bypass, which I couldn't seem to find on e-bay. However as you mentioned a simple switch did the trick. I could not have made any of this work without your effort and precision this video. Even pro installers would have a hard time figuring this out and at a great cost. You rule, man! Reminder for anyone not very savvy like me doing this that the Alpine comes with a plastic protective piece for the fiber optic connection that might be misleading and confusing that the connector won't fit your car. That simply needs to be pulled out with needle nose pliers. Mine had an a two piece sort of embeded plastic protective thing, and they both pull out easily. Plugs right in after that. Also, remember to connect all three of those black ground wires together. And if you opt for the switch between the [Yellow/Black Striped] wire and that [Green] wire for the parking brake sensor like Mike has detailed - remember that it will still not allow you to go into settings with the engine running. First key click/turn to power the unit on then bump the switch it off and on in "Settings" mode and you'll see it will wake up for you to modify everything. Fantastic again, Mike. THANK YOU! Subscribed and always going to you first for the real stuff.
@wafflesquare17 күн бұрын
Favorite comment of the day!! Thank you, Jeff. I’m so glad it was helpful.
@rettthompson836117 күн бұрын
If the plastic drain plug doesn’t come out and is stripped should I simply move on to removing the pan just knowing it’s going to be 10x messier?
@wafflesquare17 күн бұрын
Yes. You could also remove the fill plug and attempt to pump out some of the fluid.
@rettthompson836117 күн бұрын
@@wafflesquare since I’m swapping out the pan entirely would it be possible to simply and carefully drill a hole in the drain plug?
@wafflesquare17 күн бұрын
Absolutely
@eddiejohnhurst119 күн бұрын
Thank you for the help!!!
@wafflesquare19 күн бұрын
You are very welcome
@kbo254922 күн бұрын
Where would we get the gap id device? We just got a key made for our LR 3, from Minute Key. After three attempts, we have a key that starts the car, but does not lock or unlock the car. We DID have a new car battery installed about a month ago, and after that started having issues with our key. We dont know if our original key suddenly not working is connected to that or if it is just a coincidence. Thank you in advance. Im hoping to avoid a trip to the dealership for an $800 key.
@wafflesquare22 күн бұрын
Watch this video I posted on how to program LR3 remotes with the GAP IID tool: Programming LR3 Remotes With the GAP IID Tool - Ep.10 kzread.info/dash/bejne/dZqk06qKd8aZmqg.html A link to purchase the GAP IID tool is in the description of that video.
@roy424226 күн бұрын
Hi l have question aborto the scanner where l can buy and what the name because l dont found scanner for reprogamer land rover discover 2005 here in usa please can you help whit this información thank you
@wafflesquare26 күн бұрын
eBay link in the description of this video.
@ArkadiuszKubiakАй бұрын
Amazing, thank you so much for that!!!
@wafflesquareАй бұрын
You are very welcome!
@younis751Ай бұрын
You are a nice mechanic, I like what you do, and you helped me fix my car myself, a Jaguar XF
@wafflesquareАй бұрын
Younis thank you for your kind comments. I’m so glad the video was helpful.
@dunmer26Ай бұрын
Very great video thank you
@wafflesquareАй бұрын
John you are very welcome. I’m so glad it was helpful.
@loves2adv561Ай бұрын
How have the struts held up? I have an 08 I want to convert back to air suspension but I'm deathly afraid to buy aftermarket struts
@wafflesquareАй бұрын
Totally valid concern. I’ve had no issues with the struts.
@loves2adv561Ай бұрын
Awesome, that's for the response. Great video, I appreciate the help 👍
@wafflesquareАй бұрын
You are very welcome.
@brianspeldewinde7674Ай бұрын
Bought the unit and tried height calibration on L494 but it keeps failing..
@wafflesquareАй бұрын
Thank you for letting us know. I would return it within the Amazon window if you can’t get help from their tech support.
@kingbolen_official12 күн бұрын
Can you let me know the car year number?
@brianspeldewinde7674Ай бұрын
HI,Are you able to share how you do Height Calibration using this tool.
@garydeandeeryАй бұрын
I’m looking at doing diamond fabric covers on mine Iv doing black headliner with led stars can I add foam to the seats to look like bolster
@wafflesquareАй бұрын
I don’t understand what you are asking.
@KajunDaveАй бұрын
If your RZR is still sputtering, this is what fixed mine! So I check the spark at the plug it was misfiring, I opened the factory gap until I had a constant spark centered on the electrode approx 40 thousand, in conjunction with adjusting the float for a lil less fuel in the bowl no more misfiring on acceleration or top in … thanks for the video I learned a lot from it
@DonJ-lm4qwАй бұрын
What do you need to update the firmware on the air compressor. Put in a different compressor (amk) instead of Hitachi 5:10
@wafflesquareАй бұрын
Please watch episode four where I explain that… Land Rover LR3 Air Suspension Diagnosis - Ep. 4 kzread.info/dash/bejne/rGF8zsFyZ8SxaKg.html
@chewie1355Ай бұрын
Thanks
@wafflesquareАй бұрын
You’re very welcome
@joseloredo2517Ай бұрын
Great Job very well explain...
@wafflesquareАй бұрын
Thank you, Jose!
@stargateakpeterson9801Ай бұрын
My Tacoma does not have seat air bags but I have seen some saying that you have to re-calibrate the passenger seat for the dash airbag, (2005 Tacoma) to function, is this true?
@wafflesquareАй бұрын
I don’t know.
@paulselepe50Ай бұрын
hi. my 2007 lr3 v8 displays the hdc fault system not available. its not engaging gears. the gear lever not stuck on park position. i recently changed the gear selector bracket thinking that's the cause. of no avail. any ideas what the problem could be? also the air suspension dropped at the same time. thanks . paul
@wafflesquareАй бұрын
No that’s well beyond my very limited knowledge.
@RemachericoАй бұрын
I offer 100$ to any supplier that sell to me one piece of these earphones replacement, Parrot zik 2 or 3 earpad replacement. If any supplier produce this part, IT WILL BECOME RICH. The whole world expect and demand this piece.
@FactsMattersUSAАй бұрын
Great video, chasing the problem then the fix. Now to avoid all those issues with the compressor, valve blocks, air shocks, etc. Simply convert your air suspension into coil suspension and never have problems EVER again folks.
@wafflesquareАй бұрын
I totally disagree. I want the adjustable suspension that made the LR3 famous.
@kevwatkinsАй бұрын
@@wafflesquare Completely agree. The air suspension system is amazing and how the car was meant to be. If it's broken, fix it.
@wafflesquareАй бұрын
Amen!
@FactsMattersUSAАй бұрын
@@wafflesquare I do understand the land rover enthusiast. Since it's inception in 1948 when it was first introduce to farmers in England. The suspension system was very much needed in the fields. Today, PLEASE give me a reason why you need to lift your vehicle up and down. I understand the fun behind the concept but lets be real people. It's a money pit.
@wafflesquareАй бұрын
My daughter likes it and I bought the vehicle for her.
@lilkg69Ай бұрын
So this programs the immobilizer chip in the fob as well?
@wafflesquareАй бұрын
I don’t know.
@lilkg69Ай бұрын
@@wafflesquare I also live in Vegas and have been fixing my 2006 Range Rover Sport with help from your videos. Thanks for the help!
@wafflesquareАй бұрын
I’m so glad they’ve been helpful.
@CCROSS5882Ай бұрын
the most pain in the butt was the electrical connector sleeve to get in for me.
@wafflesquareАй бұрын
Me too
@CCROSS5882Ай бұрын
one thing they mention is to loosen the fill plug before you drain because sometimes you cant get it off and your stuck.
@tboewiegaardАй бұрын
Absolute legend. Just got a 2007 LR3, Mike is currently MVP on KZread 💪
@wafflesquareАй бұрын
Favorite comment of the day!! Thank you, Thomas.
@andrewtraudes2425Ай бұрын
One thing I wasn't clear on: the kit only pictures two of the tiniest o-rings used by the center valve (37:55) on the front and rear blocks, but each center valve requires two. Did the kit include 4 or did you not have enough?
@wafflesquareАй бұрын
The kits came with everything I needed.
@jaykay6290Ай бұрын
Hi, thanks for your videos. i have just recently bought a '05 V8. I have just now replaced the radiator that had hairline crack at the top left inlet. My next job will be the transmission. I am just going to do a oil change and replace the oem plastic sump with the metal one. this video has helped a lot, thanks.
@wafflesquareАй бұрын
Jay you are very welcome. I’m so glad it was helpful.
@mikem9010Ай бұрын
Hi Mike, your videos actually persuaded me to find a really nice 07’ LR3 SE with 127k well maintained rig instead of an LR4. Question is, how much time it it take to actually complete the tranny service?
@jeffwheelerofclАй бұрын
Thank you so much for these videos! Very well done! I am about to tackle this project on my 06 HSE 4.4 as the transmission all of a sudden stopped downshifting in D. Shifts fine in manual. Hopefully a complete service will make it happy. Question though about the AB pan. Does yours leak at all? I had two mechanics tell me those pans leak. Also can you confirm your refill plug was actually a T-50 and not 8mm hex? Mine looks like a T-50 and that bit fits but it is stuck and I cant get it to budge. The AB video stated its an 8mm hex and now i'm afraid I bunged it up. Thank you!
@wafflesquareАй бұрын
Thank you, Jeffrey, for your kind words. Our Atlantic British pan does not leak. I cannot confirm between T-50 & 8mm. Whatever I used in the video worked fine for me.
@jeffwheelerofclАй бұрын
@@wafflesquare Oh man, its on there good and Im really afraid to strip it. As far as the kit you ordered from CTSC. did you have to put together all of the other bits like small rubber seals along with the solenoids? I dont see a complete kit.
@wafflesquareАй бұрын
@jeffwheelerofcl the “Sealing sleeve and adapter kit” is separate from the solenoid kit.
@zackdaniels6858Ай бұрын
THANK YOU
@wafflesquareАй бұрын
Zack you are very welcome.
@ericharthman4821Ай бұрын
Did it and it looks great, just can’t post a picture.
@wafflesquareАй бұрын
That’s great, Eric!
@jpbernier3908Ай бұрын
your title says "OBD" but you seem to be demo'ing an OBDII device. Misleading for someone looking for OBD/OBDI information.
@wafflesquareАй бұрын
Ok fixed
@user-cw7pm4vc1xАй бұрын
An Actron CP9690 works on OBD I and OBD II. It has cables for Ford, G.M., Chrysler, and Toyota. It has code-connect to diagnose codes. Ebay has it.
@adavisjr88Ай бұрын
VLC may be a good option for the dashcam videos if you just need to download and watch them.
@yamahaking6137Ай бұрын
Hey buddy love your videos very helpful!! Question regarding suspension. So after calibration all 4 corners it failed to change the setting! Any idea why? I have recently replaced the compressor with Arnott and flashed it but I’m still getting the code C1A36-01 exhaust valve general failure ! Compressor runs for a while as soon as I hit the EAS switch amber suspension light comes on! If you could help me with this! Really appreciate it 🙏🙏
@wafflesquareАй бұрын
My GAP IID tool only had a choice of two compressor firmware options: Hitachi or AMK. All our strange error codes went away with the correct firmware. Therefore I would only use one of those compressor brands.
@yamahaking6137Ай бұрын
@@wafflesquare thanks
@wafflesquareАй бұрын
@yamahaking5963 you’re welcome.
@fifa1018Ай бұрын
can you get the Audio when on Maps to play through Bluetooth and through the car's speakers as opposed to out of the speakers of the display? If so, how can it be done?
@wafflesquareАй бұрын
Maps audio only plays through the speakers on the monitor for me.
Пікірлер
Hi Mike, great video with details which is refreshing. Your vehicle lift is very interesting what make and mode is it, I'm looking for something similar, did you or does it have dogs location for the Chassis, is it a Quick Jack, keep up the good work Dan LR4
Yes it is a Quickjack and the link is in the description of every video where I use it.
Do I need to pay more on program if after I bought it ?
Your grammar doesn’t make sense so I don’t know what you are asking. You only have to pay for additional add-ons like Ford, Nissan, Honda, etc. the built-in functionality is updatable for free.
A great video. It has been a great help removing a front seat from my Range Rover Sport 320. Basically the same vehicle as the LR3.
I’m so glad it was helpful.
I bought a 2017 Mercedes-Benz 170 sprinter 3.0 cargo van to build into a camper living quarters. My van has 300k on the mileage runs. Excellent diesel is designed to handle high mileage as I am a truck driver. My work truck has almost 3 million on my caterpillar engine . One main reason I chose Mercedes-Benz is rear wheel drive, and the under coating is excellent by Mercedes-Benz , I also bought a 04 land rover discovery ll also a excellent suv for overlanding no air suspension very easy to lift , I only gave 4300 for my van off of copart lots of good deals if tour timing good, everyone biggest issue in life is time this year I go to level 6 in life time is the problem with too many projects I'm planning to sell my home in near future debt the only things keeps us all working, as some people pay 60k to 200k for a mercedes-benz van unbelievable I got mine I build out myself all in probably 40k due to things costing so much like aluminum front and rear bumber roof racks , flare side, I already have my dometic ac. max air fan , lithium batteries by renogy and solar panels, Truman heater , and a few more things to start. As I said, time is everyone issue and money . Ram has one thing over Mercedes-Benz. It's wider, but I'm no fan of the front wheel drive. I go check out your other channel
thanks, you took some of the pain out of a new install 🙂
You are very welcome. I’m so glad it was helpful!
This is a fantastic series of explanatory videos. The explanations are clear and concise and you demonstrate each phase of the inspections and repairs in a manner which is easy to follow and understand. Very well done.
Ramon thank you so much!
Excellent review… Thanks!
You are very welcome.
more than 3 time i saw your video
yes i like you video thank you 😃
You’re very welcome
if only u put rurron in brackets u would have got more views
Great suggestion. I was quite surprised how little interest there was in this series.
Any thoughts on alternate paint options for hood and top.
We are getting the exterior painted a custom color.
Did you get any transmission faults while going through the fill procedure?
No
Hi Mike, I needed your help I am having issue starting LR3 2005 4.4L v8 petrol model. Sometimes the car is not starting no crack at all (3 times it started when connected with external Battery charger , battery charged fully and clearing codes) and it will operate without any issues for some days and the same issue repeats. The thing is that same setup is not working always and I observed security red light is still blinking when key is inserted while having issue. When the key is reading I was able to program 2 more keys with JLR Mangoose cable. This keys also not operational while having issue. I have already changed battery with 92ah agm battery. Confirmed key is having correct program. So I am suspecting immobiliser system something issue.Please take time create content on key immobilizer issues so that I can clear the issue
I have reached out to the company who makes the Launch Elite tool and asked them to reply to the many questions in the comments above my knowledge level as well as address issues with the key FOB programming and height calibration failing to work.
Thank you So much....much I've learned i helped my uncle on his LR D3...and now its driving more smoothly...all the way from Namibia.
You are very welcome!! I’m so glad it was helpful!
So I have an issue. My rear suspension is staying raised and one come down. Is it the rear valve blocks responsibility to vent the suspension or is it the central valve block or is it the compressors rear galley vent on back of that or is the filters plugged on compressor? My compressors newer amazon one. Went off roading, and rear locked up high. Won't vent gallery.
Have you tested the ride height sensors?
@wafflesquare Only code I get is Problem venting gallery, and then yellow light. I clear it, and hear one short squart of air venting and light again. Rear right sensors is reading 2 inches higher then left. I'm going to try taking off the sensor arm and see if it goes down. Sensor is good im sure. Was poking your knowledge on venting.
Mike!!!!!!! You are the boss! This worked perfectly for me. I have a 2005 LR3 and used this video with your instructions to a tee. The only thing I couldn't install was the parking brake bypass, which I couldn't seem to find on e-bay. However as you mentioned a simple switch did the trick. I could not have made any of this work without your effort and precision this video. Even pro installers would have a hard time figuring this out and at a great cost. You rule, man! Reminder for anyone not very savvy like me doing this that the Alpine comes with a plastic protective piece for the fiber optic connection that might be misleading and confusing that the connector won't fit your car. That simply needs to be pulled out with needle nose pliers. Mine had an a two piece sort of embeded plastic protective thing, and they both pull out easily. Plugs right in after that. Also, remember to connect all three of those black ground wires together. And if you opt for the switch between the [Yellow/Black Striped] wire and that [Green] wire for the parking brake sensor like Mike has detailed - remember that it will still not allow you to go into settings with the engine running. First key click/turn to power the unit on then bump the switch it off and on in "Settings" mode and you'll see it will wake up for you to modify everything. Fantastic again, Mike. THANK YOU! Subscribed and always going to you first for the real stuff.
Favorite comment of the day!! Thank you, Jeff. I’m so glad it was helpful.
If the plastic drain plug doesn’t come out and is stripped should I simply move on to removing the pan just knowing it’s going to be 10x messier?
Yes. You could also remove the fill plug and attempt to pump out some of the fluid.
@@wafflesquare since I’m swapping out the pan entirely would it be possible to simply and carefully drill a hole in the drain plug?
Absolutely
Thank you for the help!!!
You are very welcome
Where would we get the gap id device? We just got a key made for our LR 3, from Minute Key. After three attempts, we have a key that starts the car, but does not lock or unlock the car. We DID have a new car battery installed about a month ago, and after that started having issues with our key. We dont know if our original key suddenly not working is connected to that or if it is just a coincidence. Thank you in advance. Im hoping to avoid a trip to the dealership for an $800 key.
Watch this video I posted on how to program LR3 remotes with the GAP IID tool: Programming LR3 Remotes With the GAP IID Tool - Ep.10 kzread.info/dash/bejne/dZqk06qKd8aZmqg.html A link to purchase the GAP IID tool is in the description of that video.
Hi l have question aborto the scanner where l can buy and what the name because l dont found scanner for reprogamer land rover discover 2005 here in usa please can you help whit this información thank you
eBay link in the description of this video.
Amazing, thank you so much for that!!!
You are very welcome!
You are a nice mechanic, I like what you do, and you helped me fix my car myself, a Jaguar XF
Younis thank you for your kind comments. I’m so glad the video was helpful.
Very great video thank you
John you are very welcome. I’m so glad it was helpful.
How have the struts held up? I have an 08 I want to convert back to air suspension but I'm deathly afraid to buy aftermarket struts
Totally valid concern. I’ve had no issues with the struts.
Awesome, that's for the response. Great video, I appreciate the help 👍
You are very welcome.
Bought the unit and tried height calibration on L494 but it keeps failing..
Thank you for letting us know. I would return it within the Amazon window if you can’t get help from their tech support.
Can you let me know the car year number?
HI,Are you able to share how you do Height Calibration using this tool.
I’m looking at doing diamond fabric covers on mine Iv doing black headliner with led stars can I add foam to the seats to look like bolster
I don’t understand what you are asking.
If your RZR is still sputtering, this is what fixed mine! So I check the spark at the plug it was misfiring, I opened the factory gap until I had a constant spark centered on the electrode approx 40 thousand, in conjunction with adjusting the float for a lil less fuel in the bowl no more misfiring on acceleration or top in … thanks for the video I learned a lot from it
What do you need to update the firmware on the air compressor. Put in a different compressor (amk) instead of Hitachi 5:10
Please watch episode four where I explain that… Land Rover LR3 Air Suspension Diagnosis - Ep. 4 kzread.info/dash/bejne/rGF8zsFyZ8SxaKg.html
Thanks
You’re very welcome
Great Job very well explain...
Thank you, Jose!
My Tacoma does not have seat air bags but I have seen some saying that you have to re-calibrate the passenger seat for the dash airbag, (2005 Tacoma) to function, is this true?
I don’t know.
hi. my 2007 lr3 v8 displays the hdc fault system not available. its not engaging gears. the gear lever not stuck on park position. i recently changed the gear selector bracket thinking that's the cause. of no avail. any ideas what the problem could be? also the air suspension dropped at the same time. thanks . paul
No that’s well beyond my very limited knowledge.
I offer 100$ to any supplier that sell to me one piece of these earphones replacement, Parrot zik 2 or 3 earpad replacement. If any supplier produce this part, IT WILL BECOME RICH. The whole world expect and demand this piece.
Great video, chasing the problem then the fix. Now to avoid all those issues with the compressor, valve blocks, air shocks, etc. Simply convert your air suspension into coil suspension and never have problems EVER again folks.
I totally disagree. I want the adjustable suspension that made the LR3 famous.
@@wafflesquare Completely agree. The air suspension system is amazing and how the car was meant to be. If it's broken, fix it.
Amen!
@@wafflesquare I do understand the land rover enthusiast. Since it's inception in 1948 when it was first introduce to farmers in England. The suspension system was very much needed in the fields. Today, PLEASE give me a reason why you need to lift your vehicle up and down. I understand the fun behind the concept but lets be real people. It's a money pit.
My daughter likes it and I bought the vehicle for her.
So this programs the immobilizer chip in the fob as well?
I don’t know.
@@wafflesquare I also live in Vegas and have been fixing my 2006 Range Rover Sport with help from your videos. Thanks for the help!
I’m so glad they’ve been helpful.
the most pain in the butt was the electrical connector sleeve to get in for me.
Me too
one thing they mention is to loosen the fill plug before you drain because sometimes you cant get it off and your stuck.
Absolute legend. Just got a 2007 LR3, Mike is currently MVP on KZread 💪
Favorite comment of the day!! Thank you, Thomas.
One thing I wasn't clear on: the kit only pictures two of the tiniest o-rings used by the center valve (37:55) on the front and rear blocks, but each center valve requires two. Did the kit include 4 or did you not have enough?
The kits came with everything I needed.
Hi, thanks for your videos. i have just recently bought a '05 V8. I have just now replaced the radiator that had hairline crack at the top left inlet. My next job will be the transmission. I am just going to do a oil change and replace the oem plastic sump with the metal one. this video has helped a lot, thanks.
Jay you are very welcome. I’m so glad it was helpful.
Hi Mike, your videos actually persuaded me to find a really nice 07’ LR3 SE with 127k well maintained rig instead of an LR4. Question is, how much time it it take to actually complete the tranny service?
Thank you so much for these videos! Very well done! I am about to tackle this project on my 06 HSE 4.4 as the transmission all of a sudden stopped downshifting in D. Shifts fine in manual. Hopefully a complete service will make it happy. Question though about the AB pan. Does yours leak at all? I had two mechanics tell me those pans leak. Also can you confirm your refill plug was actually a T-50 and not 8mm hex? Mine looks like a T-50 and that bit fits but it is stuck and I cant get it to budge. The AB video stated its an 8mm hex and now i'm afraid I bunged it up. Thank you!
Thank you, Jeffrey, for your kind words. Our Atlantic British pan does not leak. I cannot confirm between T-50 & 8mm. Whatever I used in the video worked fine for me.
@@wafflesquare Oh man, its on there good and Im really afraid to strip it. As far as the kit you ordered from CTSC. did you have to put together all of the other bits like small rubber seals along with the solenoids? I dont see a complete kit.
@jeffwheelerofcl the “Sealing sleeve and adapter kit” is separate from the solenoid kit.
THANK YOU
Zack you are very welcome.
Did it and it looks great, just can’t post a picture.
That’s great, Eric!
your title says "OBD" but you seem to be demo'ing an OBDII device. Misleading for someone looking for OBD/OBDI information.
Ok fixed
An Actron CP9690 works on OBD I and OBD II. It has cables for Ford, G.M., Chrysler, and Toyota. It has code-connect to diagnose codes. Ebay has it.
VLC may be a good option for the dashcam videos if you just need to download and watch them.
Hey buddy love your videos very helpful!! Question regarding suspension. So after calibration all 4 corners it failed to change the setting! Any idea why? I have recently replaced the compressor with Arnott and flashed it but I’m still getting the code C1A36-01 exhaust valve general failure ! Compressor runs for a while as soon as I hit the EAS switch amber suspension light comes on! If you could help me with this! Really appreciate it 🙏🙏
My GAP IID tool only had a choice of two compressor firmware options: Hitachi or AMK. All our strange error codes went away with the correct firmware. Therefore I would only use one of those compressor brands.
@@wafflesquare thanks
@yamahaking5963 you’re welcome.
can you get the Audio when on Maps to play through Bluetooth and through the car's speakers as opposed to out of the speakers of the display? If so, how can it be done?
Maps audio only plays through the speakers on the monitor for me.