Пікірлер

• 
  @SeanFillner2 күн бұрын

  I like the taillights. Racks look awesome. Enjoying the good life I see..

• 
  @coachgeo4 күн бұрын

  Neu--iceeeee .. Honestly been thinking of near vertical on driver side (where can see it better) motorcycle hanger.... lonnng way from getting to that point though

• 
  @Knight8054 күн бұрын

  Man, I love your channel.

• 
  @vanlifeadjustments4 күн бұрын

  Nice mod thx for sharing!!

• 
  @BrokeOverLand4 күн бұрын

  You are welcome :)

• 
  @jameswaters61117 күн бұрын

  They never cut holes for the drain on mine either. Another item to fix. No wonder I thought it was icing over. It did eventually spit from the vents though. Maybe they routed the drain another way and it's just over flowing. I'll have to check.

• 
  @jameswaters61117 күн бұрын

  When you painted this did you happen to take photos of the assembly? I really need to disassemble the evaporator to replace the expansion valve and thermostatic switch. At the moment it's looking like I will have to completely remove it. I rather avoid all the work you just did. Smart man, adding that conduit. Whoever installed mine made a mess off the wiring.

• 
  @BrokeOverLand4 күн бұрын

  I looked. I don’t have clear video of the assembly. But you should be able to pull the bolts from underneath and lean it far enough forward to get your hand back there to run wire.

• 
  @jameswaters61117 күн бұрын

  Goodbye wrench. lol

• 
  @jameswaters3138 күн бұрын

  Chad, I want to bypass my low pressure switch so I can check the charge. My compressor does not seem to switch on. Is that the low pressure switch on the dryer. I cannot seem to find a diagram for the reddot anywhere.

• 
  @BrokeOverLand8 күн бұрын

  The low pressure switch should be between the purple wire in the 4 pin conector (pin 4) coming off the evaporator and the line going to the fan (or fans) on the condenser.

• 
  @BrokeOverLand8 күн бұрын

  And yes there should be a high pressure switch and a low pressure switch on the dryer.

• 
  @jameswaters3138 күн бұрын

  My dryer only has two wires coming out of it. Two spade connections. Is it safe to assume that's a low pressure switch?

• 
  @BrokeOverLand8 күн бұрын

  @jameswaters313 probably wouldn’t assume anything. But you’re probably right. Shoot me an email at crustyonwheels at gmail and I’ll send you my wiring diagram / crayon drawing of how I wired mine.

• 
  @jameswaters3138 күн бұрын

  @@BrokeOverLand thanks. Just emailed you. If I put my voltmeter on the yellow wire the compressor engages. 🤷

• 
  @SeanFillner9 күн бұрын

  I love steel "Angel iron" :D Looks great.

• 
  @mehrdadmorabbi67439 күн бұрын

  Looks awesome!

• 
  @joe_ferreira10 күн бұрын

  Nice custom fab.

• 
  @haroldphipps345710 күн бұрын

  Nice looking aluminum boxes!

• 
  @richmumm728810 күн бұрын

  Nice job. One can never have too much storage! 😂

• 
  @vladimiran565510 күн бұрын

  Looks sick!!! 🔥

• 
  @cjjohnson345610 күн бұрын

  I would like a ribeye medium rare please

• 
  @rronmar10 күн бұрын

  What he said!

• 
  @BrokeOverLand10 күн бұрын

  Ron next time I see you your on.

• 
  @roynorris963810 күн бұрын

  Those boxes look great! As always, nice work!

• 
  @dadontwo-wheels820213 күн бұрын

  I miss your videos!

• 
  @BrokeOverLand13 күн бұрын

  More coming. :)

• 
  @nicolasarias496715 күн бұрын

  Dog face is like..damn humans i hate u and Ur evil machine😂😂

• 
  @jameswaters31316 күн бұрын

  I want to move my radiator now. The fans are so loud mounted behind the cab.

• 
  @jameswaters31316 күн бұрын

  Chad, what refrigerant did you use? My LMTV seems to have lost charge. I bought the vacuum so hopefully I can locate the leak and it's something simple. It's a MME truck. I'm not sure if they installed it or the previous owner.

• 
  @BrokeOverLand16 күн бұрын

  I used R134a. You’ll probably need 3.2 to 3.4 pounds depending on your system and depending on your pump maybe about 8oz of PAG oil.

• 
  @BrokeOverLand16 күн бұрын

  The type of refrigerant should be listed on the side of the compressor.

• 
  @jameswaters31316 күн бұрын

  @@BrokeOverLand Thanks Chad, I'll go take a look. Where did you buy that bottle from? Nothing came up in my Amazon search. Maybe I need to be more specific.

• 
  @jameswaters31316 күн бұрын

  @@BrokeOverLand found the sticker. Looks like mine is also R134a.

• 
  @Yorkela18 күн бұрын

  This was awesome, didn’t realize you had all those toys to mess around! Looking forward to more content - Metric FTW!!! 😂

• 
  @SeanFillner19 күн бұрын

  Cartoon thumbnail is accurate... :)

• 
  @rronmar19 күн бұрын

  I was gonna say AI Chad is looking good:)

• 
  @jimmyramos783719 күн бұрын

  Nice to see you back. Ive been watching you build that truck for years. I love watching you machine parts…and your humility not to edit mistakes. Looking forward to more videos.

• 
  @dathat55519 күн бұрын

  I amuse myself picturing various situations where you are self narrating aloud. And the reactions of the people around you. 🙂

• 
  @BrokeOverLand19 күн бұрын

  Those reactions are usually… err, mostly just shocked horror.

• 
  @bigwavemax20 күн бұрын

  Chad, Did you sell the rig and start the Overland financial planning company you always wanted? Hope all is well. Look forward to more videos!

• 
  @BrokeOverLand16 күн бұрын

  We kept the rig and are full time in it now.

• 
  @michaelperry932324 күн бұрын

  Is there any way I can get a parts list for the bed frame?

• 
  @ryanchristie5349Ай бұрын

  Are you running highway (307?) gears? Or the stock ones?

• 
  @BrokeOverLandАй бұрын

  We are running 307’s

• 
  @TheWanderBoxOfficialАй бұрын

  This thing is awesome 👏

• 
  @scottgarcia-mcconnel800Ай бұрын

  I feel more manly just watching this video. Nice rig Chad

• 
  @davehughes1532Ай бұрын

  Great idea. Thanks.

• 
  @Hank00011Ай бұрын

  Any chance anyone knows where to get one of these nowadays? E-bay link is a no go and I'm not having much luck elsewhere.

• 
  @BrokeOverLandАй бұрын

  I just talked to Berend, the wireless modules are no longer manufactured so he is unable to make more units at this time. We’ll have to see if anyone else knows where to get them.

• 
  @southfloridabooting5368Ай бұрын

  I have a question for you. Where did you purchase your AC condenser from?

• 
  @BrokeOverLandАй бұрын

  Advanced automation.com. But their site appears to be down now.

• 
  @6x6TortugaАй бұрын

  Rig is looking good

• 
  @joeyalarcon92152 ай бұрын

  I am loving all of your videos! I just bought our 1997 LMTV (M1078). We live in Southern California. Have only driven it on the side streets and a few back country roads. Learning tons of information from your videos and experiences. Thank you.

• 
  @BrokeOverLandАй бұрын

  Glad you like them!

• 
  @aernan2 ай бұрын

  looks like the LMTV is a champ in the snow.

• 
  @georgewashington9382 ай бұрын

  80% of your money goes into 20% of the build

• 
  @georgewashington9382 ай бұрын

  14:55 sounds like you inserted some cartoon fight sounds there

• 
  @walterstech78932 ай бұрын

  You mentioned this mod works for C7 and 3126B engines. Looking at buying an A1 truck. Any idea if A1 came with both B and non-B 3126 engines? Is the non-B 3126 a non-ECU engine? Is that why it won’t take this mod?

• 
  @BrokeOverLand2 ай бұрын

  It will work for any of the 3126’s you’ll find in an LMTV. The difference between 3126 a,b,e is mostly just noise and emissions changes.

• 
  @chemistryguy6782 ай бұрын

  I was waiting for you to demostrate the table retracting, but you didntshow that.😢

• 
  @mikenonya19552 ай бұрын

  What type key is that my keysmith cant find it

• 
  @cjjohnson34562 ай бұрын

  Well it's not a camaro

• 
  @BrokeOverLand2 ай бұрын

  lol hey man how you been! I think percentage wise I dumped about the same amount of my savings in both. :)

• 
  @cjjohnson34562 ай бұрын

  @@BrokeOverLand I'm good, your pops keeps updating me on this adventure.... Us boys and our toys

• 
  @DoktorHalloween3 ай бұрын

  Well that was just cool. What is that sanding disk installation tool?

• 
  @BrokeOverLand3 ай бұрын

  I had to go back and see what you were talking about. It is a storage / alignment tool I made in SketchUp and 3D printed for my 6” sander. I’ll post the STL file if you want to print some.

• 
  @DoktorHalloween3 ай бұрын

  @@BrokeOverLandVery generous of you. Thank you. When I get into 3D printing i just may hit you up on your offer. BTW, you have taken an auction truck to a gem. Well done.

• 
  @NativeGatekeeper1013 ай бұрын

  you look frustrated

• 
  @Shagamite3 ай бұрын

  Good build

• 
  @AubreyH9013 ай бұрын

  its so soft thats great the others ive seen are too loud for stealth

• 
  @Hank000113 ай бұрын

  I've currently just started my build and am curious what cab seats you have installed. Great content. Keep it up!

• 
  @liquidator22463 ай бұрын

  Just a word of advice- in the future please list the tool sizes and give advice for reaching the harder bolts when doing tutorials

• 
  @BrokeOverLand3 ай бұрын

  Noted 👍

• 
  @williamcallan39793 ай бұрын

  Would like to see the Magnetic Panels being taken off so I can see how you made them. Magnetic Panels are a Brillant Idea.

• 
  @gobfranklin67593 ай бұрын

  Great content. Thanks

• 
  @adventurehawksancientharmony3 ай бұрын

  That thing is part tank!