Пікірлер

• 
  @crandallholmes1Күн бұрын

  Worthless video

• 
  @vonlipichracing25110 күн бұрын

  Getting ready to do some work on my F150 with ForScan and was happy to see you had a video using it as well. Seems doable once you understand how it works!

• 
  @tonym922013 күн бұрын

  That is so awesome your Wife and Daughter helping you.

• 
  @Michelli0118 күн бұрын

  Hey moostang. Just wanted to say miss your videos , I have a 19 F250, and understand life gets busier as kids get older and family grows - just wanted to let you know you have an awesome demeanor and videos were all great and so informative. Thanks for putting them out and hope alls well with the family and job and future. Thank you for all the educational and fun videos. Best of luck and will always look out for future vids. Take care

• 
  @moostang0918 күн бұрын

  Thank you! Life is going well out here in Utah. I would say I hit a roadblock on content and what to create next… I haven’t given up on it by any means. Just want to relight that creative candle! I appreciate you taking the time to write a comment!

• 
  @Michelli0117 күн бұрын

  @@moostang09 That creativity’s still there. Amazing energy. Just harness it and slow it down a bit. Camping in storms is a big thing , fishing, off road, boating , any truck or utility upgrades, doesn’t have to completely stay one theme, can encompass a couple, garage upgrades to house the stuff, anything, intertwine all of em , just roll with it. I recall your wife filming you awhile back too. Everyone’s into it. Dude I put the rear tailgate shock in my 19 f250 because of you lol, I recall you doing it with your Dad. So I did it too. I remember the endless guns going into the console. Was hysterical. Made me get a lockbox. Hey Unless the day job is so awesome and busy , which yes they can be , and family duties overtake the time , you got the creativity man, You have the drive , Keep going brother. We miss ya man ! Won’t forget ya. Get back out there ! You’re a natural. God bless

• 
  @donrnels23 күн бұрын

  This will be my second intercooler pipe. The first was under warranty, now this one is on me. I went with S&B. Both stock ones failed in the same place.

• 
  @emaxxx1324 күн бұрын

  Just what I was looking for😊😊😊😊😊😊

• 
  @allmotorcoupe265326 күн бұрын

  Bad ass car broo, I'm building one, do you have a parts list of what's all done, thanks

• 
  @Juanchin7629 күн бұрын

  You would think they could make an adapter for the stock plug....what a pain in the ass👎 (Yeah I'm cussing rn)

• 
  @chevyvega6622Ай бұрын

  What i want to see that no one in any vid has shown is how to remove the hose line to the intake

• 
  @JN-yn3sqАй бұрын

  I'm considering these Trail editions vs the Step editions. Do you think the Trails have enough width to be used as a step?

• 
  @MTSADMIN1Ай бұрын

  How is this possible on 600+ hp My e85 FBO with shit tires runs faster than that with a stock mt82 I’m genuinely confused

• 
  @Pro1erАй бұрын

  Tailgate theft is on the raise again so these are now ~$30 - for a hose clamp and a piece of plastic. 😠

• 
  @user-tn5mq4mq6oАй бұрын

  I have a problem with the pedal. maybe you know how to solve or what can be done. the official service said that they no longer produce these parts

• 
  @ctgaming5924Ай бұрын

  I followed these instructions and read the PDF religiously. I installed it just like this on my 07 GT, but the red LED stays on after I turn on the car, and the 2 step stays on even without the clutch being pushed in. Did I install it wrong? Or do I have a defective unit?

• 
  @gabrielmillan9205Ай бұрын

  I guess it’s different for everyone. But I had to drain about 5 gallons.

• 
  @a3arar68Ай бұрын

  Very positive vibes video, and of course valuable. Kudos to both of you and best of wishes.

• 
  @matthewhackett7406Ай бұрын

  Will this part fits 2018 ford f150?

• 
  @mariadocouto2340Ай бұрын

  What about 2016 F250 diesel??

• 
  @AMERICANMODIFIEDАй бұрын

  Hi, I like your content. Do you accept sponsored products?

• 
  @zhestyrzzz9687Ай бұрын

  why should fiddle with fittings/hoses of aftermarket catch can when you can easily get an oem ford performance for same price?

• 
  @ssswdonАй бұрын

  your suspension should take 60' to settle in; car looks too loose on rear

• 
  @lucasmaftey3128Ай бұрын

  Great vid bro

• 
  @templario82891Ай бұрын

  Link??

• 
  @templario82891Ай бұрын

  Price?

• 
  @GlennPaschall-eq7wjАй бұрын

  What is the part number of the 2 wheel valence that replaces the 4 wheel valence on a 2019 ford f-250 super duty?

• 
  @ck35612 ай бұрын

  Any issues with leaks or anything positive to report?

• 
  @klippelck2 ай бұрын

  Hi are you going to add the hot side from s&b

• 
  @RobertOortwijn2 ай бұрын

  Regarding the buttons and the black cable. What type of connector did you use on the back of the buttons? Its a piece of black that then turns into the cable. It looks strong and am kind of looking for something like that. Anyone who can help out?

• 
  @mrbigbulge6352 ай бұрын

  Mf said insane-o

• 
  @traviswalker0072 ай бұрын

  were did you get the steering wheel for 150 bucks?

• 
  @moostang092 ай бұрын

  Years ago brother… They have gone up like crazy since this video.

• 
  @joneyjimms15982 ай бұрын

  At end of video you plugged in a small plug with a wire looped back into itself. Then vehicle started. Did it come with kit or did you buy it seperate? If seperate where purchased and how much? Thanks, marvin

• 
  @moostang092 ай бұрын

  Hey Marvin, everything came in the kit except for the Forscan device. Bought that on Amazon.

• 
  @joneyjimms15982 ай бұрын

  @moostang09 thanks for replying. Called your ford supplier and asked them about the jump wire an they denied there was one in package. Found same part less the jump wire for $109. Going to make my own jump wire.

• 
  @tenkarapop3832 ай бұрын

  looks grood 💯😂

• 
  @WillBelden2 ай бұрын

  Stupidest design EVER on the part of Ford. I've got a 2019 F-350 DRW, and I'll be DAMNED if the thing is designed as it clearly is for you. Got my hand behind the seat, but I swear it doesn't feel like that. I'm ready to stick a GOD-SIZED prybar somewhere.

• 
  @johnbiagiotti56112 ай бұрын

  Just installed mine, thanks to you showing exactly where the latch release was. The builtrite video was not as helpful. Thanks

• 
  @WhiskeyLies-xt3ts2 ай бұрын

  You don’t need to do any of this to change the bulbs on these trucks 😂 This is some of the worse advice ever to replace the headlight bulb and it will take hours to do it this way. Drivers side: Remove the fender liner bolts and push pin and fold the liner back onto the wheel. Make sure the wheels are turned to the driver side. Crawl under the truck and remove the old bulbs and install the new. Re-install the fender liner. Passengers side: remove the push pin for the air box scoop and unhook the wiring from the air tube and pull the filter box cover and remove the air filter then push the air box cover up and out of the way. Carefully pull up on the air filter box and remove it. Now you have access to both upper and lower bulbs. Remove and replace bulbs and reinstall the filter box the same way you pulled it apart. Takes at most 45 minutes to do both sides VS the way these guys did it risking breaking clips or breaking the grill and all the hassle they went through for absolutely no reason at all.

• 
  @WhiskeyLies-xt3ts2 ай бұрын

  You don’t need to do any of this to change the bulbs on these trucks 😂 This is some of the worse advice ever to replace the headlight bulb and it will take hours to do it this way. Drivers side: Remove the fender liner bolts and push pin and fold the liner back onto the wheel. Make sure the wheels are turned to the driver side. Crawl under the truck and remove the old bulbs and install the new. Re-install the fender liner. Passengers side: remove the push pin for the air box scoop and unhook the wiring from the air tube and pull the filter box cover and remove the air filter then push the air box cover up and out of the way. Carefully pull up on the air filter box and remove it. Now you have access to both upper and lower bulbs. Remove and replace bulbs and reinstall the filter box the same way you pulled it apart. Takes at most 45 minutes to do both sides VS the way these yahoos did it risking breaking clips or breaking the grill and all the hassle they went through for absolutely no reason at all.

• 
  @nancystorm97222 ай бұрын

  What ya mean “boys” us girls have Country Cadillacs too. 🥰

• 
  @Gorebastardo2 ай бұрын

  Dios mio debi ver esto antes de comprar mi st

• 
  @sebastiancrabill4443 ай бұрын

  I bought a knn and the bolt pattern on the heat shield to the body didnt match, the screws where to small to screw in, the nipple to connect the small rubber hose was way to long, so i yank that p.o.s. out and installed a s&b and love it, wont go back to knn.

• 
  @davidschlarp16063 ай бұрын

  Literally dodgy show how to do it🤦🏻‍♂️

• 
  @TheManic.5-OH3 ай бұрын

  Wheres the link for the f*king write up then??

• 
  @H3STROU8LE3 ай бұрын

  Ford is so annoying with their issues that an over 100 year old vehicle manufacturing company shouldn't be having. Sad! Selling my f350 for nothing at all.

• 
  @handyscapersllc3 ай бұрын

  So how did ford fix it?

• 
  @Step-n-Wolf3 ай бұрын

  Never thought the lights on any vehicle I have had were insufficient.

• 
  @user-te7bg1js9w3 ай бұрын

  Muchas felicidades quedó genial!!

• 
  @carlozp08213 ай бұрын

  Hey there, I'm a huge fan, I was just wondering if you could please share the part number for the harness you used in the you f250 please

• 
  @Gooselip3 ай бұрын

  I would get them but it's not enough light to the rear when driving. I've seen them on the road and you can barely see the rear of the truck! Not a fan at all.

• 
  @Gooselip3 ай бұрын

  My 2019 has 75 k on it and the hood shocks went out today!

• 
  @davesnothereman46783 ай бұрын

  Thanks for the video man helped me out so much

• 
  @MtownsGreatest3 ай бұрын

  Bro thanks for the video! I have a 2017 F250 XLT that I am upgrading like you did. Im ordering the leather wrapped steering wheel like yours. My question is, will the oem airbag from my current XLT rubber steering wheel for sure be compatible with the new leather wrapped steering wheel?