Пікірлер

• 
  @EvaNestrickКүн бұрын

  I made one with small sea shells it is beautiful don't know how to send a picture

• 
  @terryme3152Күн бұрын

  You talk too much

• 
  @NinaHansen20088 күн бұрын

  Thank you for telling about the warping. I have had a number of resin things that warped!

• 
  @EvaNestrick11 күн бұрын

  It is beautiful

• 
  @joancole209415 күн бұрын

  Thanks for a helpful and clear video! Beautiful work!

• 
  @mrsmiggins6435Ай бұрын

  Stunning!!! Thank you

• 
  @TinaHemphillАй бұрын

  Watching you work is my ASMR fix! I have never made anything out of polymer clay and I don’t intend to start, because I do so many other arty crafty things. However, it doesn’t stop me appreciating other people’s talents and creativity. Thank you for sharing your fantastic creations.

• 
  @pamelaschmeltzer9556Ай бұрын

  I love your storage idea!

• 
  @user-dn9vd9xg9pАй бұрын

  These are beautiful!

• 
  @user-dn9vd9xg9pАй бұрын

  Are you also going to resin the back of these with the hard resin?

• 
  @katiegordon610Ай бұрын

  I don't usually do the back

• 
  @user-dn9vd9xg9pАй бұрын

  I rubbed the alcohol on my diamond glaze and it totally ruined it. Left a bad hazy glaze on diamond glaze. Just FYI.

• 
  @dianewalsh292 ай бұрын

  I love using Abalone shells in resin, this is a lovely idea, I'm going to try the black poly clay 👍❤️

• 
  @justenemckelvy-overstreet23572 ай бұрын

  Thanks! The caulking works great too! The alcohol tip was great

• 
  @VictoriaLavender2 ай бұрын

  Beautiful. I have mica flakes, I'll give them a whirl and see if those work too. Thanks!

• 
  @violetjackson50272 ай бұрын

  Well done!🎉

• 
  @darlahall65832 ай бұрын

  Thank You for Your Great Video. I am New to this so you’ve been a Great Instructor. Following your lead, I will definitely be using the same technique and products.💖

• 
  @teresamangum56872 ай бұрын

  Thanks for sharing I've learned alot from your video ty❤

• 
  @kayharris64572 ай бұрын

  Thanks for sharing. Beautiful work and I will be following your guidance.❤❤❤❤❤❤❤❤

• 
  @mimikhan95462 ай бұрын

  Excellent Thanks.

• 
  @gayefletcher52573 ай бұрын

  Thank you for going into details so nice. I am just beginning and all of your tips are very helpful. I also like making these rose canes.

• 
  @Pashanny8243 ай бұрын

  This piece is stunning. Your color choices and skill are awesome. Thank you for sharing.❤

• 
  @gayefletcher52573 ай бұрын

  What about the sides? Do you resin them?

• 
  @lindalopresti3893 ай бұрын

  Such a great tutorial. I know I’ll watch it again, so much info. Watching your hands taught me so much. Thanks! I subscribed.

• 
  @emilyanderson82823 ай бұрын

  You are great. I listened and fast-forward but the bits I listened to you are great. Thank you!

• 
  @katiegordon6103 ай бұрын

  U can also change the playback speed to faster or slower as well

• 
  @donnadyer70403 ай бұрын

  Great technique! So beautiful! Thanks for sharing your awesome talent with us!

• 
  @MakeupMobster4 ай бұрын

  Wow those came out beautiful

• 
  @uniqnixieclocksgreganddebr45994 ай бұрын

  Yeah I was cleaning up and found the molds I did with silicone and can not get it out so tossed them. Thank you for your explanation. When you open the caulking try put a nail in the hole and plastis on top.

• 
  @michelej18004 ай бұрын

  Gorgeous!

• 
  @sarakelly32144 ай бұрын

  If you open the silicone latex squeeze that has no cap, use a nail in the hole to "cap it off".

• 
  @janethastings1934 ай бұрын

  Very pretty and professional !!! Tks for all your hard work.

• 
  @janethastings1934 ай бұрын

  Where did you get your shells ?

• 
  @irenewomack77054 ай бұрын

  Me to I hear Morgan or lots of other and I can’t help but sing along to im luvin u my country sister

• 
  @katiegordon6104 ай бұрын

  Lol

• 
  @anitataylor71794 ай бұрын

  To seal the caulking tip, insert a nail with a good size head... Stays fresh forever

• 
  @Chhesterification4 ай бұрын

  To keep the caulk from drying out, put some cling wrap around the tip and then push caulk out until you have a bubble at the tip. Secure it with an elastic or rubber band. It works on all kinds of caulk.

• 
  @cokospringer34 ай бұрын

  I needed this vid so bad🙌 I just started making polymer clay jewelry and it’s a lot of fun. Do you have a video on polishing!? Because idk why but after sanding down the resin edges I can’t seem to get it to really shine again when polishing. Which which sucks because I’m also no where near good enough to make anything without needing to sand something off. Part of that I just learned from your vid is because of the mat I use when curing. It is totally flat and creates flat patched on the bottoms whatever I’m working on, so I just went to Amazon and found the type of mat you mentioned which is so much better

• 
  @katiegordon6104 ай бұрын

  I have a good amount of videos but I tried not to polish the resin if u have to then the best way is doing another thin coat of resin.

• 
  @dalvalianavictorio30934 ай бұрын

  Por favor traduzir para o português

• 
  @user-xm1jc9zr3i4 ай бұрын

  Can you use anything rather than achocl

• 
  @sharonkeef5 ай бұрын

  Katie why do u not post anymore

• 
  @katiegordon6105 ай бұрын

  Not doing any crafts

• 
  @katiegordon6105 ай бұрын

  I've been doing some tik toks on make up n skincare but that's about it house is my main project

• 
  @cathymosteller80495 ай бұрын

  I always put a nail with a big flat head on it..inside the caulking tube. It keeps them from drying out and the big head is easy to grab for removal.

• 
  @DiamondShines4U5 ай бұрын

  These are wonderful! Thank you for sharing this. I'm thinking that we could use shrink plastic for the base shapes instead of cutting out plastic pieces (takes to long, too tedious). Using the shrink plastic is easy to cut out the shapes and you can cut the exact shape you want. I think I'll give it a try and let you know the results.

• 
  @katiegordon6105 ай бұрын

  Anything that won't flex polymer clay wood shapes really anything u want i was just using what I had a the time even a jewelry bezel would prob work

• 
  @bertareyes87465 ай бұрын

  What kind of paste are you using?Thanks for the video❤

• 
  @DebbiePike775 ай бұрын

  I use a soft nail file, fine and extra fine.

• 
  @user-cg2lw6rm7c5 ай бұрын

  Your tutorials are great! Thank you!

• 
  @bridgetwazitta5 ай бұрын

  Amazing

• 
  @KimScrapper5 ай бұрын

  This piece is stunning! I really appreciated you showing the process from start to finish. I am going to give this a try, thanks for the inspiration.

• 
  @suebrister7395 ай бұрын

  Really enjoyed your video

• 
  @shortiegrb16 ай бұрын

  You can polish sanded resin with another thin coat of resin. The new coat bonds with the old coat

• 
  @tonilyday19176 ай бұрын

  Thanks for all the tips. One tip for you. After you cut the top off your caulk and want to save it insert a nail big enough to fill up the opening.

• 
  @uniquegirls15996 ай бұрын

  I use to use that resin, but it yellows over time

• 
  @katiegordon6106 ай бұрын

  So far it's been almost 3 to 4 years on some and I've not seen any yellowing

• 
  @docsmom60816 ай бұрын

  Just found you! I enjoy your video alot. I liked hearing your story and your suggestions to folks to keep their pissy comments to themselves. I like your suggestions for the caulk mold craft and am going supply shopping tmw. Carry on.