Пікірлер

• 
  @juliemulhern1414Күн бұрын

  Yes it did thank you perfect!

• 
  @fixitfraserКүн бұрын

  You deserve tons more views from start to finish nothing skipped

• 
  @MartysworkshopКүн бұрын

  Thank you for all your support

• 
  @bobjit252Күн бұрын

  Yeah the other side not so easy as there is no hole you can look through , but that’s the thing every one on you tube always does the easy side 😂

• 
  @MartysworkshopКүн бұрын

  True, thank you for watching

• 
  @bo64hellfireКүн бұрын

  Honestly I'd just replace the whole thing to a completely different brand. I've had my nextbase (G22GW) for only 3 months and already the internal battery is shot and doesn't hold a charge. I can unmount and power it on to do anything with it.

• 
  @MartysworkshopКүн бұрын

  Yea, thease batteries need to be looked at by the manufacturer! It'd bot good

• 
  @wasulkhan74563 күн бұрын

  Hi mate mine was doing same as yours ive a 2.4 tdci transit 2007, then today its stopped working altogether just a click when trying to turn key, their was a burning smell last few times i started it in the day it was really struggling to start aswel earlier in the day, would that be starter motor or same part as youve shown?

• 
  @MartysworkshopКүн бұрын

  Was the burning smell comeing from the colum or under the bonnet?

• 
  @wasulkhan74565 сағат бұрын

  @Martysworkshop thanks for replying mate, was the starter motor all sorted now 👍

• 
  @AlfieCavapoo4 күн бұрын

  My MK3 has the ABS light, no stop start and speedometer not working now. It's the same problem?

• 
  @Martysworkshop4 күн бұрын

  I'm not sure sorry

• 
  @Ash-gy4yv5 күн бұрын

  Very helpful video 👏

• 
  @Martysworkshop4 күн бұрын

  Thank you for watching

• 
  @alexzandergosling68405 күн бұрын

  Exactly what I needed, thanks alot mate!

• 
  @Martysworkshop5 күн бұрын

  Thank you for watching

• 
  @a6473810 күн бұрын

  I haver a diesel and when I turn on the igniting at 1 all lights up, at 2 I can fire up the glow plugs and they heat and goes off when heated like normal. But when I turn the key to run the starter it just make click sound like the battery is empty (it is fully charged connected to a external battery to help start and a 40A charger). And after a few tries like that it dies completely and nothing will light on anymore... Also if I turn on the lights and the heating fan all that works, until I try start, then everything dies. I wonder if it can be same problem? Diesel engines do not have an ignition so it could be different symptoms of the same problem ?

• 
  @Martysworkshop7 күн бұрын

  This had the symptoms of a flat battery so could be the fault,

• 
  @johngeers402310 күн бұрын

  Very nicely done! I feel smarter for a few minutes! Maybe even long enough to install my own airhorn. That is peculiar since I was looking for the function of a relay... and incidentally am installing an electric airhorn. Where's the airhorn install vid? I just found it. Thanks!

• 
  @Martysworkshop10 күн бұрын

  Thank you for your support

• 
  @dt160713 күн бұрын

  I have the same issue. Also message for Hill start assist and active city stop. Do you think they are all connected? ie same sensor fault. Thanks

• 
  @Martysworkshop10 күн бұрын

  Yes all them systems are controlled by the abs

• 
  @damlaaktas775313 күн бұрын

  Hi can you help me i have the same car but dont know which is the fuse that should be used for always on fuse for example when the car is off the dash is on

• 
  @Martysworkshop10 күн бұрын

  I'm not sure what you mean, do you want the dashcam to be on with the ignition on?

• 
  @chrisbow177614 күн бұрын

  Cheers for the video, but I wish you had shown the removal process. I am sure it is easy, or does in need anythign supporting before removing the two bolts? Don't want to remove the bolts only for the engien to shift and then not be able to get the mount back in place.

• 
  @Martysworkshop14 күн бұрын

  It's fine you can rock the engine easily

• 
  @Mike-Gor14 күн бұрын

  Thanks from Russia 😉🛠

• 
  @Martysworkshop14 күн бұрын

  Thank you for watching

• 
  @Martysworkshop14 күн бұрын

  Thank you for watching

• 
  @andyg81716 күн бұрын

  Mot fail that ..😂, the side play needs to be no more than 10 mm... Shim washers will help and grease ..

• 
  @Martysworkshop15 күн бұрын

  Yea the bearing was done 😆

• 
  @AlexanderRobertson-eu2oz16 күн бұрын

  This is one of the nicest guys I have ever met. We were neighbors in Yeppoon Queensland a number of years ago. Good to see you on the Tube!!!

• 
  @Martysworkshop15 күн бұрын

  Thank you Alex, it was a pleasure to have met you too.

• 
  @weymufffisher17 күн бұрын

  Do you replace with a new cooler as well?

• 
  @Martysworkshop17 күн бұрын

  No I just leave it on

• 
  @Can_I_Have_A_Go19 күн бұрын

  Hi How do I get to speak to this guy?

• 
  @Martysworkshop17 күн бұрын

  What's the problem?

• 
  @Can_I_Have_A_Go19 күн бұрын

  Hey mate you can I ask. You a question

• 
  @Martysworkshop19 күн бұрын

  Sure what's up?

• 
  @joeblog29220 күн бұрын

  Hi mate had this fault got the metal out didn’t snap turbo put it all back together vans running fine but I’m getting this fault code p1205-13 exhaust after treatment fuel injector control circuit open any ideas I didn’t change the egr cooler is that the problem?

• 
  @Martysworkshop17 күн бұрын

  I'm not sure sorry

• 
  @tanggambalanga21 күн бұрын

  Could you do a video of replacing diesel fuel infectors please.

• 
  @Martysworkshop19 күн бұрын

  I don't have this vehicle avaliable sorry

• 
  @alinlucaciu259525 күн бұрын

  Mine has a hole where the pipe can be reached

• 
  @Martysworkshop23 күн бұрын

  That's good

• 
  @willhafod28 күн бұрын

  My hero!! Many thanks for that.

• 
  @Martysworkshop23 күн бұрын

  Thank you for all your support

• 
  @Dont.....-29 күн бұрын

  Bro thank you! You fixed my can i wish i would have come across this sooner. Mine was the same no codes i had the egr deleted so didnt think this would be my problem. My symptoms where Loss of power below 2000 rpm Dpf doing regens every few miles No codes Diesel knock in mornings and below 2000rpm Things i replaced due to my local garage recommending it Differential pressure sensor Map sensor Maf sensor 4x injectors and seals Turbo vgt motor How is it a garage cant fix it but a youtube video and a few hrs in the garden solved my issue. Thanks again buddy so helpfull ive got my beloved van back after everyone told me to give up and sell it

• 
  @Martysworkshop29 күн бұрын

  Thank you for your feedback, I'm glad my video can help

• 
  @alanjm123429 күн бұрын

  Thanks! The hardest bit was opening the child proof packaging on the battery! (Yours didn't seem to have it)

• 
  @Martysworkshop29 күн бұрын

  Yes I know what you mean thay can be a nightmare

• 
  @brianpotter9891Ай бұрын

  Just go to royce transmissions of harlow they have all gearbox bearings fit new bearings it will be good as new😊

• 
  @Martysworkshop29 күн бұрын

  Thank you for your input

• 
  @james-ew7klАй бұрын

  This is for any Nissan Juke owners who decide to change their timing belt and in my case the tensioner and coolant pump also. ( As an aside I noticed that after 190k miles the diameter of the used coolant pump roller ( measured with a vernier caliper )was just a smidgen under that of the new one ). After trying to put the belt on in the order as per the Haynes manual, with the tensioner last, it was super tight; I had to give up after god knows how long and came across this video during my forced tea break. My tensioner is very similar; there is a hole, but no pin supplied. I decided to put a thin screw in that hole against the spring tension, and installed it with the belt in the gap between the roller and the screw. Belt fitted piss easy, so easy a 5 yr old could have done it. So as a parting shot , why the f..k couldn 't the Haynes manual make it clear?. Thanks for the video, it helped me get there.

• 
  @MartysworkshopАй бұрын

  Thank you for your feedback, I'm glad my video could help

• 
  @vwvolАй бұрын

  Référence pièces svp

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @TerryLund007Ай бұрын

  Just wondering what would make the LT50 not rev while it’s on a corner, mine seems to cut out a bit for a second, any info would be helpful, thanks

• 
  @MartysworkshopАй бұрын

  I would make sure the stop wires are not catching on anything

• 
  @noahsia2430Ай бұрын

  So is it possible that if this hose is broken there will come water in the trunk? Because if so i know this is yhe probleem but if not there is an other problem

• 
  @MartysworkshopАй бұрын

  I believe the vents behind the bumper are also a problem

• 
  @someoneoutthere6259Ай бұрын

  Excellent explanation and video quality. Much appreciated. From New Zealand

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @ufodroneguy6614Ай бұрын

  Thank you so much best video and information I got a Renault traffic and this is that has happened to me

• 
  @MartysworkshopАй бұрын

  Thank you for your feedback

• 
  @rapinncapin123Ай бұрын

  Again, you're the best!!!

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @bluewendytubeАй бұрын

  Thank you, it wasn’t my sealed bottles of water I keep in there for emergencies! That was very useful.

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @JustxxxRaVАй бұрын

  I did same like 😊 by the way i clean all the rust and painted

• 
  @MartysworkshopАй бұрын

  Nice thank you for your input

• 
  @raymondpinder3692Ай бұрын

  excellent useful video , many thanks

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @andycowley7979Ай бұрын

  Cheers. I was looking under bonnet wonder were the f is it! I'd also watched a video were it shown a sealed box with a pre heater element and was told that was the fuel filter so when i collect the paper filter from euro car parts i thought it was wrong. Thanks for clearing things up.

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @nicolaspromet5025Ай бұрын

  hi marty, I am in the same situation with my LT50, will you have the service manual to share with us? It would be a great help along with your videos. thank you. Nicolas

• 
  @MartysworkshopАй бұрын

  You can download it online, let me know if you can't find it, I will find you a link

• 
  @nicolaspromet5025Ай бұрын

  I couldn't get it, that's why I asked you. I can not find it.

• 
  @MartysworkshopАй бұрын

  Email me and I will send it to you [email protected]

• 
  @nicolaspromet502529 күн бұрын

  @@Martysworkshop sent. thank you so much

• 
  @davidharris8885Ай бұрын

  Thank you. I have an A4 b7 tdi, there is power at the connector on the car and when I put 12 volts on the pump like this it turns fine. However it won’t pump on the car.

• 
  @MartysworkshopАй бұрын

  Does it make noise when opporated on the car?

• 
  @jimmygilbride5242Ай бұрын

  Can not find video

• 
  @MartysworkshopАй бұрын

  kzread.info/dash/bejne/gICfj5KflJjRn5c.html

• 
  @MartysworkshopАй бұрын

  It is in my videos

• 
  @angcummings2974Ай бұрын

  Thank you. Very helpful 👍

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @lukelovell2203Ай бұрын

  What size cable have you used. Amp or gauge? Thanks.

• 
  @MartysworkshopАй бұрын

  Sorry I lost the reel

• 
  @lukelovell2203Ай бұрын

  Great video. I think I need your help 🏴󠁧󠁢󠁷󠁬󠁳󠁿😂

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @lukelovell2203Ай бұрын

  @@Martysworkshop what size cable am I ok to use for my Compressor for my Dixie horn. I’ve done a set up like yours but I’ve just realized I have used a 17 amp cable from Halfords. What can I get away with mate. Thanks

• 
  @eddieash1669Ай бұрын

  Nice one Marty, thanks for this, perfect timing for changing my pads, hopefully discs are OK for now!

• 
  @MartysworkshopАй бұрын

  Thank you for your feedback

• 
  @MrTayto63Ай бұрын

  great video like other 2 vids on wiring air horn in this case, was asking you few questions on another video about wiring air horn to original horn wiring but the fuse on vehicle horn is 10 amp and you advised not to increase amp fuse already there. I'm thinking of doing same setup as using push button switch instead of wiring to vehicle steering .great vid.thanks again

• 
  @MartysworkshopАй бұрын

  Thanks

• 
  @MrTayto63Ай бұрын

  back again,can i connect too live and negitive wires already connected to my vehicle horn cables, so i can use the air horn and vehicle horn together.would i still need a relay or can i do without relay if connect air horn connected 2 wires coming off vehicle to be able to use the 2 horns together of origional wiring . put in 20 amp fuse instead of 10 amp for origional horn.cheers

• 
  @MartysworkshopАй бұрын

  If the original horn uses a 10 amp fuse then that is to protect the wire as that may be what it is rated to, so I wouldn't advise putting a bigger fuse in

• 
  @MrTayto63Ай бұрын

  @@Martysworkshop does this mean I can't connect the 2 horns together to work off steering wheel.is my only option to wire separate with push button switch.cheers

• 
  @MartysworkshopАй бұрын

  You can but use the original size fuse

• 
  @MrTayto63Ай бұрын

  @@Martysworkshop if I connect to original wiring but put in relay and run positive wire with inline fuse too battery.would this be ok. 10 amp fuse would probably blow as did for you so you increase too 15 amp .

• 
  @MartysworkshopАй бұрын

  Yea that would be fine

• 
  @michailokeefeMooMooАй бұрын

  Wouldn't it be easier if you took the wheel off too. Very useful video

• 
  @MartysworkshopАй бұрын

  Not sure I didn't need to so didn't but it might make it easier to access

• 
  @johannessmal6091Ай бұрын

  Mine doesn’t loosen enough to put the belt on, where do I get enough slack to put it on?

• 
  @MartysworkshopАй бұрын

  They can be tight, have you cheaked the length against the old belt?

• 
  @johannessmal6091Ай бұрын

  @@Martysworkshop Yes, I had to swing the water pump to get enough slack. Thanks!

• 
  @kylehiggins5435Ай бұрын

  amazing video! thank you for this you are the man!

• 
  @MartysworkshopАй бұрын

  Thank you for watching

• 
  @antjohnson4236Ай бұрын

  are there mark on both the crank shaft and camshaft to mark up the timing of the engine? ive had my timing belt snap and looking to sort this myself, I know im going to have to strip the head down to check the valves n stuff but my only issue is the timing on the engine when I put it all back together? thanks

• 
  @MartysworkshopАй бұрын

  The cam is a hole that you line up with a hole in the cam gear, but the crank is a hole behind the oil filter housing that locks in the flywheel. Hope this helps