Пікірлер

• 
  @F.B.l3 күн бұрын

  So my drill battery on my diy Bluetooth speaker will last a little more then half a hour. Thanks man

• 
  @Power_Music_NCS4 күн бұрын

  Bro added Racism in his Invention💀

• 
  @bimbo-yw6ny4 күн бұрын

  in the 2.3 ide there is no additional board manager in preferences??

• 
  @izumi_fx5 күн бұрын

  Nice job💀

• 
  @samnafri7958 күн бұрын

  hi bro, how about use 2 IR sensor to read 2 different rotation obejct? 2 IR sensor 2 object rotation 1 arduino 1 LCD display

• 
  @aaroncerverau8 күн бұрын

  Awesome! Mine just arrived today

• 
  @rohithchinnu878110 күн бұрын

  @THEELECTRONICGUY bro at the end u didn't show the full connection is the bulb taking current separately or is it taking it from Arduino

• 
  @THEELECTRONICGUY11 күн бұрын

  Code and Circuit Diagram: etechnophiles.com/step-counter-using-esp32/

• 
  @S-DIY2CREATIVE12 күн бұрын

  My own servo is not working with my receiver any possible solution please

• 
  @MrI8igmac13 күн бұрын

  I solder a 3.7v 850mah lipo to the board and planned to use the 5v pin for npn motor control, but the motor didn't start up. I haven't tested with a volt meter but i assume there is voltage there. When connected to usb power supply, the motor starts up to verify the circuit is correct. I tried two lipo 3.7v 850mah in parallel to increase Ampacity. Still, the motor did not start up. Will i burn the board up if i connect two lipo 3.7v batteries in series to double the voltage?

• 
  @MkhizeLawrence13 күн бұрын

  What if the terminal for positive is broken solution pls cause phone cant switch on

• 
  @Your_Average_Rabbit14 күн бұрын

  oh is that mercury sensor a tilt switch? cool project tho!

• 
  @dktechnicalguru355615 күн бұрын

  Off- on and close program.... Please share code

• 
  @adrianharris41119 күн бұрын

  This video is now out of date as Digistump no longer have a website, so you cannot add the URL under preferences.

• 
  @nemonespider23 күн бұрын

  Can u make a artificial horizon

• 
  @Subhu042025 күн бұрын

  Can we do this for speed ( km/hr)

• 
  @aryasatyoa.r.33927 күн бұрын

  How to make servo move back and forth without turning the potentiometer?

• 
  @user-tn4em3uf8f27 күн бұрын

  This display name ?

• 
  @user-oj4ks7oz9i29 күн бұрын

  Man where's the code

• 
  @THEELECTRONICGUY11 күн бұрын

  etechnophiles.com/step-counter-using-esp32/

• 
  @TradeWithAPhoneАй бұрын

  Where to buy?

• 
  @SaurabhLavaniya-by5voАй бұрын

  Thankyou for quick recap of diode concepts

• 
  @CrazyCoupleDIYАй бұрын

  This will not work if you move the vehicle to a new position. It will still follow the old path that is in it s memory. How about using a high precision GPS module

• 
  @THEELECTRONICGUYАй бұрын

  You have to delete the last stored path first by pressing the del button

• 
  @atmoreguitt5902Ай бұрын

  Great info !

• 
  @petrmares6081Ай бұрын

  love you!

• 
  @AtulTiwari-lp1dlАй бұрын

  tis was so easy i cannot tank you eno

• 
  @enessenova8329Ай бұрын

  Will this car work with 2 9V Zinc carbon cell?

• 
  @mac1mikeАй бұрын

  Description??????

• 
  @notaplant2132Ай бұрын

  Did you use the Arduino support package from Matlab ? If I don't want to use the support package, is it possible to control an Arduino project using Matlab GUI ?

• 
  @ex1stenzАй бұрын

  So i have to buy an entire board for every new project? It’s a pity! 😢

• 
  @THEELECTRONICGUYАй бұрын

  What do you mean by "for every new project"?

• 
  @ex1stenzАй бұрын

  I used to program the dip chip atmega with Arduino board, then i swap the chip, and with just the cristal osc and bunch of pwr supply components, into my current project into a custom board (lets say an irrigation system). Now with this chip package is not possible.

• 
  @ustarecepusta2 ай бұрын

  Teşekkür. Basitmiş.

• 
  @dienau63132 ай бұрын

  IT DIDNT WORK, I CHANGED EVERY COMPONENTS AND IT STILL DIDNT WORK

• 
  @cloudmusic7912 ай бұрын

  wow follow back

• 
  @patrik84432 ай бұрын

  Thx you helped me a lot!!!

• 
  @abdallae.mohamed93862 ай бұрын

  How many volts did the source enter?

• 
  @cck14962 ай бұрын

  Excellent video....Is it a standard that it takes 5 RC to fully charge the capacitor (irrespective of R,C and EMF)? Thanks.

• 
  @THEELECTRONICGUY2 ай бұрын

  Yes. Charge/Discharge- within 1% limit.

• 
  @hmavt112 ай бұрын

  Lagta he Is video ka description kisi aur ne likha hoga.. isliye ye code ko comment me pin karna bhul gaye hai😅

• 
  @myband5552 ай бұрын

  Nice project! Could you please let us know that this can ditect a pulse around 10MHZ. Thank you

• 
  @THEELECTRONICGUY2 ай бұрын

  As far as I remember, it can only detect up to 10 KHZ

• 
  @MicroVersee2 ай бұрын

  hello i am using windows 11 laptop and i installaed all drivers of digispark but on arduino ide the code is not being uploaded to my attiny85 digispark. but the leds of attiny 85 are working but i can not upload the code to it. i cannot even update the drivers, if i try to update them there is no update button there are only install and delete buttos so what should i do please help me

• 
  @valentinocaso53962 ай бұрын

  did you solve it in the end? I'm having the same problem. I have version 2.3.2 of the IDE.

• 
  @THEELECTRONICGUY2 ай бұрын

  I just tried this on a different PC- Downloaded Arduino IDE and repeated the steps. It's working fine for me. Try this: Before uploading the program, unplug all ports(mouse, keyboard, etc.). Then when it says, "Timeout in 60 seconds"; insert the Digispark board- start with the port you just unplugged. If nothing happens, change the port, and so on.

• 
  @THEELECTRONICGUY2 ай бұрын

  @@valentinocaso5396 Try this: Before uploading the program, unplug all ports(mouse, keyboard, etc.). Then when it says, "Timeout in 60 seconds"; insert the Digispark board- start with the port you just unplugged. If nothing happens, change the port, and so on.

• 
  @MicroVerseeАй бұрын

  @@THEELECTRONICGUY i did everything but it didn't work at all

• 
  @MicroVerseeАй бұрын

  @@valentinocaso5396 no i couldn't solve

• 
  @imzi_29742 ай бұрын

  Digistump avr not installing can someone help please

• 
  @fathimathihsana69172 ай бұрын

  Jumper wire male to female?

• 
  @atharvkasal20562 ай бұрын

  thx

• 
  @Warezzfan2 ай бұрын

  Fantastic presentation! Keep it up!

• 
  @THEELECTRONICGUY2 ай бұрын

  Download the program from here: www.etechnophiles.com/using-adxl345-with-esp32/

• 
  @THEELECTRONICGUY2 ай бұрын

  Code and Circuit Diagram: www.etechnophiles.com/wifi-strength-checker-using-esp32/

• 
  @THEELECTRONICGUY2 ай бұрын

  Download the program from here: www.etechnophiles.com/national-flag-on-tft-display-using-arduino/

• 
  @atharvkasal20562 ай бұрын

  THNX

• 
  @Rupalirana21782 ай бұрын

  Coooooooóooooooooooooode

• 
  @TechsScience2 ай бұрын

  Better use servo tester it has 3 different modes

• 
  @Arduinoman5232 ай бұрын

  MINES GOT SCK

• 
  @ahsanejoyoАй бұрын

  its the same as scl

• 
  @atharvkasal20562 ай бұрын

  code?

• 
  @THEELECTRONICGUY2 ай бұрын

  www.etechnophiles.com/national-flag-on-tft-display-using-arduino/

• 
  @damianfreeman50692 ай бұрын

  3 terminals can mean battery status indicator [BSI] or The the third terminal is a battery temperature indicator . but if it's got four terminals then it's a [Bsi ]Battery indicator and the a Battery temperature