Want to learn electronics the fun way? Checkout my course: bit.ly/3E4qKt0 👈 Use discount code - ⭐ET20⭐ and get upto 20% off!👈

This is the most detailed video of path memorizing bot over youtube. Thanks TEG!!!!! When can we expect a face reveal..... Fans really want to see who is behind TEG and its success!!!!

can we add two path ? a to b and b to c and back to a ?

How to change it to Bluetooth controlled car I mean you controlled with ir remote without using that How to use Bluetooth module hc 06

Can you do this for the robot to memorize its way around a specific building?

Hey Great work BTW what can be the maximum size of the array of movements??

At 15:16 instead of pressing ir remote button to run the copied path in eeprom when it is power on . Is there any other way to run the copied path as soon as it is powered on without pressing any button from ir remote? Please reply it's very urgent and very important for me😅

Great work But can we teach to memorize more path

@THEELECTRONICGUY

Жыл бұрын

Hi Deepu, what do you mean by more path?

Great explanation! My movements are working perfectly when I used the Remote Control IR code. However, when I uploaded the path memorizing code, the forwards and backwards don't work(only one wheel rotates). Any idea why?

Very good

Awesome project , Do u have GPS based navigation robot codes

This will not work if you move the vehicle to a new position. It will still follow the old path that is in it s memory. How about using a high precision GPS module

@THEELECTRONICGUY

2 ай бұрын

You have to delete the last stored path first by pressing the del button

i recommend using a motor shield instead of an l293d ic if possible

@tusheyy6033

11 ай бұрын

why?

@dominion9222

11 ай бұрын

@@tusheyy6033 less wires involved, easier to code

This is a truly amazing underrated video. The idea of storing path details is insane. I will incorporate it in my own bot.

@THEELECTRONICGUY

5 ай бұрын

Glad you enjoyed it!

Hey man You got a new Subscriber

How many array paths can be saved

This is good stuff!! God bless

Thank you friend for your video and your code ,helped me a lot I searched for the way to make this project for a while , but with all the imperfection in motors and so , it's difficult to repeat précisely the desired path ,

@x1roboticxs

Жыл бұрын

Use rotary encoders that directly attach with the motors and add a feed back system

can we use full-bread board instead of mini

is the schematic correct because, the enable 3/4 pin should also be connected to vcc

How can I make this Bluetooth controlled instead of ir . Please reply 🙏

Bro we tried it but the code is not working properly And we are adding time lag to the every action in a single attempt only one particular motion is working and which is not chenging its direction even it will not stop also it is just move in a single direction while we are trying for different directions.

I cannot see your course on graphy, it just goes to the main website page- can you please supply a new link?

Great work dude. Hard to find these type of authentic work on this platform these days. Can you please tell me that how much the total project will cost?

@THEELECTRONICGUY

4 жыл бұрын

Hey, thanks for the compliment man! Approx. Cost: 1000 or $13 But you can cut this cost to half by using a nano or mini

@user-jp8mo2ub9f

10 ай бұрын

Hello how can i connect the motor driver l298n with this setup

Hi, I noticed that the circuit diagram in tykner cad is different from the one in the video could you please make one the same as the one in the video

@THEELECTRONICGUY

Жыл бұрын

Hi, It's the same as far as I remember. What's odd in the give circuit diagram?

@Poncki

Жыл бұрын

@@THEELECTRONICGUY Well in the video when you show a top view of the car the wiring looks different then on the circuit diagram, also the HEX codes my IR remote gives are 7 to 8 characters long and not always consistent in bringing out the same code. How can I fix this.

@THEELECTRONICGUY

Жыл бұрын

@@Poncki Are you using the proper delay? And check for the wiring. Maybe IR is not inserted properly thus giving random values

plz reply Bhai ye btaiye ki electrical aur Machatronics engineering difference kya hum machatronics engineering krne ki soch rhe abhi hm 10th me hai plz bhi aap humko thoda guide krdijiye jaise ki engineering me sabse zada important kya hkta hai physics, chemistry and maths waise inme se sabse zada easy aur mera favourite maths bs thoda algebra difficult lgta hai lekin hum usko bhi theek krle gen hai aur phir physics 🤩♥️ phir chemistry Bhai plz es question ka reply zaroor dijiye ga electrical aur Machatronics me Computer subject lgta hai KYA jaise humko computer me zada kuch bhi nhi ata kyo ki mere school me Computer subject itna ache se nhi pdhate the blki hum ko interest hi nhi tha bhot darr lgti thi computer se long long answers lekin ab humko programming me interest bhot zada ho rha hai aur hum Arduino ki programming seekh rhe hai aur python start krne ki soch rhe

@navneetsajwan765

4 жыл бұрын

Hey Zoha, I am also in 10th class. I have the same question. Plz TEG bro, give us some explanation and guidance!!!

@alzoha1267

4 жыл бұрын

To thik hai fir agle video me pocha jaye ga ok😀

in the video you also used several capacitors but in schematic they are not present.

Can we add two path

Nice

Can you send this program with four motors

Your explainantion is amazing.. You must explain with you being infront of the camera.. In that way, it will create audience retention. Keep up the good work

@THEELECTRONICGUY

4 жыл бұрын

Thankyou for the valuable suggestion☺️

Great video

Sir my remote is giving me different numbers each time.please guide.

@THEELECTRONICGUY

4 ай бұрын

Random Hex codes or some gibberish?

Bro tell me something about Electronic engineering plzz

Will this work for a bigger chassis if I use a stronger motor and bigger wheels ?

@THEELECTRONICGUY

Жыл бұрын

Yes. Speed should be slow

Great work. Can I use GUI I set on my computer to control instead of Remote?

@denniskarlsson9362

28 күн бұрын

Yes if you have like a arduino with wifi like a r4

Bro How can I able to build such projects I mean what courses are best in order to take in Btech?.. Please help me brother

why -1 int fwd_Counter = -1;?

How to make this all work using Bluetooth Module or just joystick

@denniskarlsson9362

28 күн бұрын

Same principel so the joystick need a IR transmitter like the Remote controll and send diffrent hex values based about the joystick moment

OK, Silly me! Solved the voltage problem!!!, But still experiencing the need to push the stop button numerous times. Also with the left and right turn, can only be made when car is stationary, is it possible to operate it as a continuous movement, that is, going forward turn left, continuing in a forward motion then turning left etc, or does it have to be in steps? Thanks G

@THEELECTRONICGUY

Жыл бұрын

Hi George, sorry for such a late response. Is your issue resolved now?

@georgeb9256

Жыл бұрын

@@THEELECTRONICGUY thanks, still wondering about continuous operation! That is going forward and turning left and right without stopping? Cheers and merry Christmas

@THEELECTRONICGUY

Жыл бұрын

@@georgeb9256 just to be clear, you mean: “While bot is moving forward, if left button is pressed, it will rotate to left(suppose 45 degree, depends on the delay). Now without any button pressed the bot should keep moving in this 45 degree direction” Right?

@georgeb9256

Жыл бұрын

@@THEELECTRONICGUY thanks for response and hope you had an enjoyable Christmas! And, no, I mean whilst button is pressed say, it turns left, when button released carries on straight then when other button pressed and held, turns to the right until button is released then continues on, all without stopping! Cheers G

How can we make the same path memorizing robot with Bluetooth module it's very important and urgent... plzzzz reply and tell how can we make it !!!

@ruchi9898

3 жыл бұрын

Hey abdullah! Have you done the path memorization using bluetooth?

@abdullahzakir4065

3 жыл бұрын

@@ruchi9898 yes I have done it

@devanshbharti2828

3 жыл бұрын

@@abdullahzakir4065 hey bro can i email you or something i need some help with this

@ruchi9898

3 жыл бұрын

@@abdullahzakir4065 can you please provide me the source code for better understanding😊

@HarshitSingh-mg7zt

2 жыл бұрын

It's easy Just replace/use and operations with Bluetooth module

Excellent video! finally managed to get mine to operate but having spasmodic operation of the "STYOP" button! any suggestions? Also, once disconnected to the computer there is no power to the UNO. where does the power come from for the board thanks G

Can we use L298 motor driver module instead ??

@THEELECTRONICGUY

4 жыл бұрын

Yes you can

Boliye bhi

THANKS HE MUCH

13:13 Path memorizing permanente

Buen vídeo

Please add gps in this robot so, I can give targets location to robot through mobile. Please make this video

i want use L293D module to run four motors plz tell me changes i need to do in the codes . will humbly for your kind reply

How can I contact you?

Are you from gbpec ??

@THEELECTRONICGUY

3 жыл бұрын

Yes

Well bro….. Bro i want the same model can u share ur contact

Nice