Jon Kragh - Personal Channel
Jon Kragh - Personal Channel
This is my older personal KZread channel. My new channel can be found here: kzread.info/dron/fsENQiaaYp_vmmRdzbKulw.html
I left this channel in place because there are a few videos here that have helped people in the past.
Пікірлер
Did that create a grinding sound prior to you fixing it?
How are you doing? I have AGE Frisbee frisbee. just like yours. But I'm mistaken trying to hit the ice button and push it in too far. So now the ice buttons crush ice buttons. Do not work. How can I fix it? Thank you very much.
😊 This was so simple, if not obvious. But if you do not move washer machine and look under the machine, you will end up calling repair person when anyone with a wrench can fix. Our nut and washer were laying on floor beneath machine. When the drum is not affixed, it throws off the load sensing process and the machine presents with the LE error. Try to reset using the buttons, but if the issue is this nut beneath the machine it will not resolve. 1-Turn machine off. 2-UNPLUG 3-Remove drain hose and place inside machine with washer lid partially closed to secure it out out of the way. 4-If needed, TURN OFF (perpendicular) hot and cold water valves and disconnect the hot and cold water feeds at the washer. Put a small bucket beneath as you do, or you may wet floor. 5-Wiggle machine into position where you (and a second person if needed) can prop the machine on its side. 6-Then look beneath and check if washer and nut are in place and tight. 7-If not put washer on and then nut and tighten with adjustable wrench or monkey wrench. 8-return machine upright. 9-reattach hot cold water lines HAND TIGHT. 10-return drain hose to waste line/drain/sink 11- open up hot cold water lines and check for any leak. 12-Return machine to position 13-Let it rip. If this was issue it should be resolved. My Hurricane Sandy washer is back in business! 14- If late in day, tell significant other or roomate how hard it was and that you saved them a lot of money. Hence, their turn to fix dinner and get you an ice cold beverage of choice. Happy clean clothes!
My LG top loader, 12 years old, started making a grinding noise during the spin cycle and displaying the LE code. Watch this video, flip the washing machine on its back and sure enough this is exactly what the problem was. Reinstalled the nut with some blue loctite, problem solved. Thank you!
OMG, thank you so much very helpful
I watched several videos on different issues than can cause an LE error so I would be prepared for whatever may be wrong. I came across this one and just wrote it off thinking, "there's no way my issue will be THAT simple." Well, I turned it over and sure enough, loose nut. Tightened it and the problem is gone. Amazing! None of the in-depth repair videos even mention this as a possible source of the problem, so thank you for posting this.
We just used this to help fix our same washer. Saved us $600! Thank you!
You are my hero. Same problem.
Thank you! You saved me a lot of money.
Perfect. This is 2nd time for me. Bet they sell lots of sensors. TY
When we got our washer used a few years ago, we had someone find a video like this, possibly yours. He was able to tighten the bolt and we were set. This week, we've had issues. We don't even have a wrench. Tightening as best we could got us a little better function so I'm really hoping if I can get a way to tighten it completely we'll be set.
Thank you thank you thank you!!!
Went to replace the Hall effect sensor amd the nut and washer were on the floor!!!!! Thanks!!!!!
Hey, did you manually map everything in Cubase or was any of this premapped with the HUI emulation?
blue locktight..
It’s Christmas Eve and this video just helped me so much 🙌🙌🙌
Much more helpful than the stupid LG videos! TY!
Hi sir. I honestly found this from googling my own name. I am also Jon Kragh. In WI; I wanted to say hello since it is such a strange coincidence.
So awesome! Thanks for reaching out. FWIW my full name is Jon Kragh, no Jonathon.
Here’s my video about it. kzread.info/dash/bejne/kZmLlLlypbTff9Y.html
You're a lifesaver! Easy fix!!! It worked!!!
Great to hear!
YOUR ARE A GENIUS!! I actually bought a new washer and when I took this one out, I said to myself "Let me check that nut to see if that guy was right"> Sure enough, the nut was loose! I tightened it up and it worked like a charm. No I have a new washer on the way. I guess I will sell this one. THANK YOU!
Excellent!
Same issue with mine, tightened it up and works fine now
When you had your LE code pop up could you hear the clanking sound of this screw being loose at the bottom? That’s what I started hearing all of a sudden then the LE code would pop up.
Thank you. I replaced the water level sensor and still got the code. Watched your video and the bolt was completely off and on the floor. You saved me a lot of frustration. Thanks again
Glad it helped
Thanks for the vid, my fridge was having the same issues however the reset buttons didn't work. I found a dislodged ground wire on the temperature board was loose causing a short. Your vid inspired me to open up the panel and find the issue.
I saw same error.. this fixed it.. thanks
No problem 👍
Mine went dead. Pushing the two buttons on the right fixed it. Thank you!
:) good video. I have a question. Can i use this mixer for multitrack live session recording? Let's say I have this (i really have it) and I also have a computer with Cubase. How can i record?
Thank you so much. Saved us from buying another one. God bless you.🙏
Glad it helped! Such a simple fix. Ours is still going strong.
@@JonKragh yes! Ours was literally underneath our washer 😂
Thanks for your help
Thank you for taking the time to post this. Same thing happened to my LG and you saved me both time and cash
Same problem. Thanks for the video!!
Yup just checked mine, it was loose as a goose. Used an empact wrench to tighten it. THANKS for the video.
I actually don’t even know what to say. We bought an LG washer in 2013 and I hated that thing with all my guts from the very beginning. Didn’t fill with water, didn’t clean well, weak movement, error codes for non existent errors. After 7 years of frustration, one pump replaced already and zero, but absolutely zero assistance from LG for any of the issues, the machine started with excessive UE codes yesterday. A small half hour load took 7 hours. I was beyond livid! I decided to try what you did, but had not high expectations or any for that matter. Got the blue loctite, tightened the nut, put the machine back in position and started a rinse and spin only. I’m not kidding! My jaw dropped! Machine sensed load once left, once right and then filled! More water than I’ve ever seen in that machine before! Went through the program with a movement of a 20 year old chacha dancer! I’ve never seen so much passion coming from a machine ever before! Especially not this one! This one resembled more a sloth than anything else. Started a load of towels, hoping it wasn’t just a coincidence. It wasn’t! I’m on my 3rd load of laundry now. Not one error code! Not one!! Clothes are clean and even feel different! I can’t believe that I went through 7 year of laundry hell, because “engineers” decided that a frigging flush nut is sufficient for a moving, wobbling, spinning, heavy drum! I serious can’t wrap my head around this much stupidity! Thank you so so so so very much!!
Thanks so much for taking the time to post this amazingly written comment! It really makes me believe that a few moments to post our collective findings together out here on KZread can make a big difference. Happy to hear it worked out for you and pay it forward.
This is awesome Jon! Looking forward to following your video journey! Go you!
Great first podcast and the song came out great! Can't wait for the next podcast. I can also speak first hand to the value Maxi brings and with overdelivering. My project was the one Maxi touched on related to restoring severely damaged audio cassettes that were sitting in an Arizona garage for 25 years. Like you, it was a passion project that I wanted to finish. Maxi went above and beyond and basically started over when we weren't getting the results we wanted using a tool we thought would do the job. He didn't give up knowing there had to be a way. After the tracks were restored by removing wow and flutter, hiss, drop-outs, etc, I added additional tracks to complete the vision. Maxi was instrumental in giving me recording, mixing, editing advise along the way and he then mastered them so they could finally be released 25 years later. I'm very happy with the results and looking forward to the next project with Maxi! If interested, you can read more about the process here and well as listen to before and after: www.bradkloch.com/post/the-burnlackers-the-ab-studio-sessions
Brad, thank so much for the reply and words of encouragement. Your story is so similar to mine. I just checked out your tracks on the website you linked and WOW!!!! Your band was so good and the new mixes sound incredible. Hope to stay in touch.
I had the same problem. You saved me couple of hundred dollars. Thank you!
Thanks. Display buttons are different but pressed the same ones. It worked
Thanks so much for posting this- we had the same issue. I was about to go down a whole different rabbit hole, but after seeing your video I checked that nut - and sure enough loose on ours too. Tightened with a bit of loctite and it's working great again. You saved me a lot of time and/or an unnecessary repair call - thanks again!
something so small causing such frustration seems this might be a manufacturer's defect (oh I forgot to tighten the bolt lol (wait, where does this lock washer go
This was exactly the problem. Easy fix. Thanks for sharing!
Great video!! Seemed to fix our issue. Can you post the lock washer you used? Thank you again for the great video
I would buy myself an TAscam DP24 recorder does it work to Cubase Le 10 ?
Thank you for taking the time to do this, it was the same problem we had. God Bless
Thanks for taking the time to comment. God Bless!
Hi Jon, I recently purchased a DM 24 and MOTU 2408mk3 and I am having a hard time getting it set up. I am receiving signal to Digital Performer 10, but track 1 is coming in on tracks 1 and 2 and nothing is appearing on 3,4,5. I'm hoping you might be kind enough to help me get this sorted out. I would very much appreciate it if you could. Thanks, Pete-
Useful info, thanks.
Appreciate you taking the time to comment. Good luck!
The older models in the 80;s where better models....I', sending my Adora to the scrap yard...no more GE appliances....period.
I am trying to connect my tascam to Cubase and now I have found your great video. I don't know what I am doing wrong but it doesn't work. How do you have your Tascam with MIDI connected to yor PC? Which Interface do you use? thanks in advance
THANK YOU! Had the exact same problem and the exact same reason for the problem lol
Mmc closed option say ‘’device is not active”. How solve it?