"Influencer Garage" LOL! Glad it's up and whirring. Btw, brake lights are so over rated.
@Good-Enuff-Garage4 сағат бұрын
Right?!
@dombutler76857 сағат бұрын
Awesome! What's next? Safety stuff like bms and brakes?!! Also, are you selling your house? Or is it your neighbor selling up as they're sick of hearing about ev conversions?!!!!
@Good-Enuff-Garage47 минут бұрын
Yeah, I don't usually do EV Conversions, but when I do, I like to sell my house and have to move in the middle of one!
@dombutler768531 минут бұрын
@@Good-Enuff-Garage Hopefully a bigger garage and no HOA at your new house!! Hope it all goes well, I can imagine that the donuts was impressing/showing off to the prospective buyer when they turned up in a Tesla!
@Ghia669 сағат бұрын
Fantastic to see it leave the driveway! Loved the donuts you did down the cul de sac! 🔥
@2.3_44XD--18 сағат бұрын
No need to drive to a gas station and buy that expensive liquids, just cheaper electricity at home I love it
@motorcircusfi20 сағат бұрын
Congratulations! It was good enough.
@user-tx7or1fl3b20 сағат бұрын
Or wheel bearing
@Good-Enuff-Garage17 сағат бұрын
turned out to be a loose castle nut on the CV axle shaft, a full turn later no wobble
@alibro751220 сағат бұрын
SWEET! Now do burnouts, go on go on go on do it do it do it. 😁
@Good-Enuff-Garage20 сағат бұрын
check the forum post
@alibro751219 сағат бұрын
@@Good-Enuff-Garage I think that is very childish and irresponsible of you!
@giannichellini787921 сағат бұрын
Niesamowity Samochód Elektryczny
@JamieJones198521 сағат бұрын
You might just be the first to have a driving prius conversion setup. 🎉
@Good-Enuff-Garage21 сағат бұрын
thanks, thinking about changing the name of my shop to Influencer Garage, kinda has a nice ring to it
@lsh3rd19 сағат бұрын
At least first Gen 3 Prius. The Audi A2 that Johannes did probably wins first overall.
@JamieJones198512 сағат бұрын
@@lsh3rd sorry, yea, I mean zombie Prius
@lsh3rd3 сағат бұрын
@@JamieJones1985 yep! That’s a good point and is probably an even bigger difference than the generation of the transaxle.
@robertstevens285722 сағат бұрын
That looks far to safe and conventional....better start driving it with no doors
@Good-Enuff-Garage22 сағат бұрын
can you at least cut me some slack for not even having working brake lights, lol
@Trump24GreatWhiteHope22 сағат бұрын
Top to bottem is balljoints side to side tie rods.. all over n around wheel baering. Just a rule of thumb. Keep on keepin on yall
@Good-Enuff-Garage17 сағат бұрын
Thanks for the tip!
@cmaster36322 сағат бұрын
You need a wheel bearing and maybe upper and lower ball joints if you see they are loose
@Good-Enuff-Garage22 сағат бұрын
I am not a front wheel drive guy, so all this is new to me, and I had to yank the VW CV axles out to weld them to the Prius trans output ones and then when I put them back in I think I tightened the castle nuts with the car resting under its weight so the hubs could not slid in more, today I done did it with the hubs off the ground and suspended in the air and each castle nut got at least an additional full turn before getting snug and now zero wobble
@CurtisKlope22 сағат бұрын
Before we do Pike's Peak 😂
@itdo.23 сағат бұрын
pop the bearing cap off and check how tight the axel nut is. idk about the mk1s or mk2s but i remember mk3s had a castle nut with a cotter pin for the rear axel nuts and they really dont have to be super tight, just kind of snug.
@Good-Enuff-Garage23 сағат бұрын
thanks, I put these on hand tight as per KZread instructions, lol when I freshened up the rear brakes
@Ghia669 сағат бұрын
To see if it’s a brake issue. With the handbrake off. Try adjusting up the brake drums (with the wheels on) until the wheels lock then back of the adjusters until the wheels turn with little or no drag. 😊
@lynxdoesvlogs9245Күн бұрын
Somethings dragging if not the parking break you’ve got some bearings or seals freezing up
@Good-Enuff-Garage23 сағат бұрын
interesting
@sambunney7504Күн бұрын
What do you use as a BMS?
@Good-Enuff-GarageКүн бұрын
i do not have BMS at this time, plan to add something in Phase III of the project
@sambunney7504Сағат бұрын
Fair enough. What are the options? Personally I wanted to use SIMP but I've come unstuck by the lack of teensy 3.2s
@hobbsytoobКүн бұрын
Well done Gregski! Been too damn busy to watch all the videos but added most of them to watch later. Respect, dude.
@ElectricSuperCar2 күн бұрын
Great milestone!
@Ghia662 күн бұрын
Help me! I can’t stop rewatching this video!!!
@Evbmw3 күн бұрын
Is that you Greg?
@Good-Enuff-Garage3 күн бұрын
yup
@blakeparmeter76863 күн бұрын
Is anyone rebuilding / providing aftermarket for the cells yet? Those cells are used on almost all BMW Hybrids and Genuine are ~$1700 USD each.
@Good-Enuff-Garage3 күн бұрын
do you mean the modules (boxes the size of car batteries) or the actual cells?
@lesworthington33333 күн бұрын
Congrats Gregski! Stay cool.
@Ghia663 күн бұрын
Fantastic to see! Champion work and hours of brilliant how to do it videos to boot! Chuck Norris does not sleep. He waits.
@pjmoreland3 күн бұрын
Sweet!
@LatutaEV3 күн бұрын
So cool well done 👍
@robertstevens28573 күн бұрын
Well done, looking at the weather your going to have to strap an AC unit to a roof rack 😂
@Good-Enuff-Garage3 күн бұрын
actual footage of you installing a unit for me kzread.infoiP2PD17CvrE?si=flIpG3POrWaK81Dp
@2.3_44XD--3 күн бұрын
Fantastic job. Really happy to see the work finished 👍🏻👍🏻
@christwidle94543 күн бұрын
Whoopsie🥳 so jealous, well done.
@vasilispants82413 күн бұрын
What a crazy and adventurous first drive! Beyond my imagination!
@Good-Enuff-Garage3 күн бұрын
um, cause the HV charging is not working yet, and even the 12v car battery is like 11.5 volts, and even my iPhone battery died, LoL
@jasonmanness79413 күн бұрын
Congrats!🎉
@seancosy13 күн бұрын
Confidence rising with each new video
@soultronx104 күн бұрын
Heck. I've been curious about it. Super cool.
@bromdulasta4 күн бұрын
Thats 2 ev conversions now on to the 3rd??
@Good-Enuff-Garage4 күн бұрын
😳
@davidkurimski61225 күн бұрын
Nice use of recycled car parts!!
@Good-Enuff-Garage5 күн бұрын
Thanks!
@Ghia665 күн бұрын
Fantastic! So many baby steps, one giant leap for the Rabbit! 🐇
@Good-Enuff-Garage5 күн бұрын
she was about to become stew if it didn't work last night, lol
@Ghia665 күн бұрын
Not long now!
@davidkurimski61225 күн бұрын
I did not find the cost analysis for this project yet. What electric motor and controller are you using??
@Good-Enuff-Garage5 күн бұрын
this is an AC motor aka transaxle out of a 2010-15 Toyota Prius with a matching inverter, it is controlled via a Zombieverter VCU from EVBMW.com
@lsh3rd5 күн бұрын
w00t!
@Good-Enuff-Garage5 күн бұрын
you can say that again !
@lsh3rd5 күн бұрын
@@Good-Enuff-Garage w00t!
@davidkurimski61225 күн бұрын
My question is, "How much did this cost, parts only please?" I have 2 caddys and am considering a hybrid conversion or the ALH 5sp TDI.
@Good-Enuff-Garage5 күн бұрын
all including the cost of the car was under $3,000 and I don't mean to be that guy but click the first link in the description, the very first post in that thread has an itemized table, I would cut and paste it here but it's in a table
@MikesTropicalTech5 күн бұрын
That's either max regen or a drive shaft jammed up
@Good-Enuff-Garage5 күн бұрын
it was Max Something all right, I think it's cause it's not under load
@georgenice5 күн бұрын
🎉🎉🎉
@Ghia665 күн бұрын
Chuck Norris doesn’t scroll with a mouse. He uses a Lion!
@Good-Enuff-Garage5 күн бұрын
lol, he also removes the Backspace key off his keyboard, cause he never makes mistakes
@Ghia665 күн бұрын
@@Good-Enuff-Garage 😂
@Ghia666 күн бұрын
On the launch pad! 🚀
@Good-Enuff-Garage6 күн бұрын
ha, ha... 10, 9, 8 ...
@Ghia666 күн бұрын
Great work! You well and truly turned into a pumpkin with this episode! Looks like I need to get some more relays!
@halemotors40847 күн бұрын
Great Video, your video states getting the safety box code then goes off, do you know how to get it? Thank you
@Good-Enuff-Garage6 күн бұрын
I'm sorry I don't follow, at what time in the video do I say that?
@halemotors40846 күн бұрын
@@Good-Enuff-Garage Hi it may be my mistake, at 33.47 it states in writing now to get this code onto this bad boy! I thought you meant you were going to do another video where you do the AOS procedure some how and get the 12 digit code so you can use the battery pack in the car again?
@Wayner19837 күн бұрын
Thanks for the great video. I have this charger and have to swipe in the app to start, just like you, yet all other reviews and documentation say they just plug it in and it starts. Have you found a way to bypass the app to start charging when you plug it in?
@Good-Enuff-Garage7 күн бұрын
omg, so glad you posted that cause after a few weeks or months mine just started charging automatically, maybe we were just too impatient, so just plug yours in and wait, just walk away and dont swipe in the app to see what happens 🤞🏼
@Fidiasz837 күн бұрын
I have 2016 bmw 330 e battery still going strong got 18 miles to 20 range with 92000 miles on it here in 🇬🇧
@Ghia668 күн бұрын
Excellent work and so tidy! Time for a cup of tea and a nice lie down! 😊
@Good-Enuff-Garage7 күн бұрын
gracias amigo, and if by tea you mean 🍺🍺🍺🍺🍺 or 🍷🍷🍷🍷🍷then you are speaking my language, we are way beyond tea 😉
Пікірлер
Greg for President
"Influencer Garage" LOL! Glad it's up and whirring. Btw, brake lights are so over rated.
Right?!
Awesome! What's next? Safety stuff like bms and brakes?!! Also, are you selling your house? Or is it your neighbor selling up as they're sick of hearing about ev conversions?!!!!
Yeah, I don't usually do EV Conversions, but when I do, I like to sell my house and have to move in the middle of one!
@@Good-Enuff-Garage Hopefully a bigger garage and no HOA at your new house!! Hope it all goes well, I can imagine that the donuts was impressing/showing off to the prospective buyer when they turned up in a Tesla!
Fantastic to see it leave the driveway! Loved the donuts you did down the cul de sac! 🔥
No need to drive to a gas station and buy that expensive liquids, just cheaper electricity at home I love it
Congratulations! It was good enough.
Or wheel bearing
turned out to be a loose castle nut on the CV axle shaft, a full turn later no wobble
SWEET! Now do burnouts, go on go on go on do it do it do it. 😁
check the forum post
@@Good-Enuff-Garage I think that is very childish and irresponsible of you!
Niesamowity Samochód Elektryczny
You might just be the first to have a driving prius conversion setup. 🎉
thanks, thinking about changing the name of my shop to Influencer Garage, kinda has a nice ring to it
At least first Gen 3 Prius. The Audi A2 that Johannes did probably wins first overall.
@@lsh3rd sorry, yea, I mean zombie Prius
@@JamieJones1985 yep! That’s a good point and is probably an even bigger difference than the generation of the transaxle.
That looks far to safe and conventional....better start driving it with no doors
can you at least cut me some slack for not even having working brake lights, lol
Top to bottem is balljoints side to side tie rods.. all over n around wheel baering. Just a rule of thumb. Keep on keepin on yall
Thanks for the tip!
You need a wheel bearing and maybe upper and lower ball joints if you see they are loose
I am not a front wheel drive guy, so all this is new to me, and I had to yank the VW CV axles out to weld them to the Prius trans output ones and then when I put them back in I think I tightened the castle nuts with the car resting under its weight so the hubs could not slid in more, today I done did it with the hubs off the ground and suspended in the air and each castle nut got at least an additional full turn before getting snug and now zero wobble
Before we do Pike's Peak 😂
pop the bearing cap off and check how tight the axel nut is. idk about the mk1s or mk2s but i remember mk3s had a castle nut with a cotter pin for the rear axel nuts and they really dont have to be super tight, just kind of snug.
thanks, I put these on hand tight as per KZread instructions, lol when I freshened up the rear brakes
To see if it’s a brake issue. With the handbrake off. Try adjusting up the brake drums (with the wheels on) until the wheels lock then back of the adjusters until the wheels turn with little or no drag. 😊
Somethings dragging if not the parking break you’ve got some bearings or seals freezing up
interesting
What do you use as a BMS?
i do not have BMS at this time, plan to add something in Phase III of the project
Fair enough. What are the options? Personally I wanted to use SIMP but I've come unstuck by the lack of teensy 3.2s
Well done Gregski! Been too damn busy to watch all the videos but added most of them to watch later. Respect, dude.
Great milestone!
Help me! I can’t stop rewatching this video!!!
Is that you Greg?
yup
Is anyone rebuilding / providing aftermarket for the cells yet? Those cells are used on almost all BMW Hybrids and Genuine are ~$1700 USD each.
do you mean the modules (boxes the size of car batteries) or the actual cells?
Congrats Gregski! Stay cool.
Fantastic to see! Champion work and hours of brilliant how to do it videos to boot! Chuck Norris does not sleep. He waits.
Sweet!
So cool well done 👍
Well done, looking at the weather your going to have to strap an AC unit to a roof rack 😂
actual footage of you installing a unit for me kzread.infoiP2PD17CvrE?si=flIpG3POrWaK81Dp
Fantastic job. Really happy to see the work finished 👍🏻👍🏻
Whoopsie🥳 so jealous, well done.
What a crazy and adventurous first drive! Beyond my imagination!
um, cause the HV charging is not working yet, and even the 12v car battery is like 11.5 volts, and even my iPhone battery died, LoL
Congrats!🎉
Confidence rising with each new video
Heck. I've been curious about it. Super cool.
Thats 2 ev conversions now on to the 3rd??
😳
Nice use of recycled car parts!!
Thanks!
Fantastic! So many baby steps, one giant leap for the Rabbit! 🐇
she was about to become stew if it didn't work last night, lol
Not long now!
I did not find the cost analysis for this project yet. What electric motor and controller are you using??
this is an AC motor aka transaxle out of a 2010-15 Toyota Prius with a matching inverter, it is controlled via a Zombieverter VCU from EVBMW.com
w00t!
you can say that again !
@@Good-Enuff-Garage w00t!
My question is, "How much did this cost, parts only please?" I have 2 caddys and am considering a hybrid conversion or the ALH 5sp TDI.
all including the cost of the car was under $3,000 and I don't mean to be that guy but click the first link in the description, the very first post in that thread has an itemized table, I would cut and paste it here but it's in a table
That's either max regen or a drive shaft jammed up
it was Max Something all right, I think it's cause it's not under load
🎉🎉🎉
Chuck Norris doesn’t scroll with a mouse. He uses a Lion!
lol, he also removes the Backspace key off his keyboard, cause he never makes mistakes
@@Good-Enuff-Garage 😂
On the launch pad! 🚀
ha, ha... 10, 9, 8 ...
Great work! You well and truly turned into a pumpkin with this episode! Looks like I need to get some more relays!
Great Video, your video states getting the safety box code then goes off, do you know how to get it? Thank you
I'm sorry I don't follow, at what time in the video do I say that?
@@Good-Enuff-Garage Hi it may be my mistake, at 33.47 it states in writing now to get this code onto this bad boy! I thought you meant you were going to do another video where you do the AOS procedure some how and get the 12 digit code so you can use the battery pack in the car again?
Thanks for the great video. I have this charger and have to swipe in the app to start, just like you, yet all other reviews and documentation say they just plug it in and it starts. Have you found a way to bypass the app to start charging when you plug it in?
omg, so glad you posted that cause after a few weeks or months mine just started charging automatically, maybe we were just too impatient, so just plug yours in and wait, just walk away and dont swipe in the app to see what happens 🤞🏼
I have 2016 bmw 330 e battery still going strong got 18 miles to 20 range with 92000 miles on it here in 🇬🇧
Excellent work and so tidy! Time for a cup of tea and a nice lie down! 😊
gracias amigo, and if by tea you mean 🍺🍺🍺🍺🍺 or 🍷🍷🍷🍷🍷then you are speaking my language, we are way beyond tea 😉
Rip that dirty diesel out of there!
kzread.info/dash/bejne/e6CGu6Ofqdjfm5M.html