Пікірлер

• 
  @djmarkymarks.f.415326 күн бұрын

  Nice, i have two E.V. 18" 3 way speakers.. 18" Subwoofer with a 10" Midrange & a 1" Baby Cheek Tweeter all in one..

• 
  @musicequipments108223 күн бұрын

  Respect my friend.

• 
  @djmarkymarks.f.415323 күн бұрын

  @@musicequipments1082 and I also have two 18" 3 way Cerwin Vega speakers.. so four 18" 3 way speakers all together.. they don't make them anymore.. they're Stupid loud with Mucho Bass.. 👍👍

• 
  @PhuTranNgoc-if9yq28 күн бұрын

  Ib

• 
  @javimachine2120Ай бұрын

  i have the exact same model as you, this is not a sound card or an audio interface, this is used as an expantion of inputs to an audio interface that works with adat (optical) inputs/outputs, no software needed or instalation disk as this is a piece of analog equipment

• 
  @musicequipments1082Ай бұрын

  Thanks for the advice sir. Respect.

• 
  @HouseJackBuilt2 ай бұрын

  Any idea about the drivers? I´m searching for a replacement. Hard to find an there are no markings on the original driver

• 
  @musicequipments10822 ай бұрын

  Hi sir. I had the same problem and I couldn't find a replacement speaker, but I found a B&C 10md26 which is a 10 inch speaker, 8 ohm 350w. Actually it is a mid bass speaker, but it gets the job done pretty well. Respect.

• 
  @HouseJackBuilt2 ай бұрын

  @@musicequipments1082 I contacted the manufacturer; hopefully, they have a solution. I looked up your recommendation, but when I consider the frequency range, I'm doubtful if it's powerful enough in the low end.

• 
  @musicequipments1082Ай бұрын

  Sir, if you are looking for a subwoofer that produces very low frequencies, well then you might look for something else because it is quite powerful and punchy, but not exactly a subwoofer. But the construction of the loudspeaker, helps a lot to produce decent amount of bass for small areas.

• 
  @HouseJackBuiltАй бұрын

  @@musicequipments1082 I´ve contacted Apart/Biamp and they had some spare drivers in stock. Ordered them from them.

• 
  @musicequipments1082Ай бұрын

  I am happy you could find a solution. Respect.

• 
  @longlostlimit2 ай бұрын

  I just got my hands of one of these thats missing the digital card just like yours. And while unfortunately it looks like the card will be impossible to find, i’m thinking about getting a tascam us16x08 because it has 8 line level inputs and just routing my octopre to those to be able to give them a use. Have you come up with anything else to do with yours?

• 
  @musicequipments10822 ай бұрын

  Well my friend, I really hope you are luckier than me with this equipment, because I never had the chance to make it work. Respect.

• 
  @felixmotanul52422 ай бұрын

  Hi, Music Equipments. Please can you tell me where is manufactured RCF Woofer 15''. Thanks,

• 
  @musicequipments10822 ай бұрын

  My friend if you want original rcf speakers, they must always have it written Reggio Emilia, in a shinny piece of small fancy plastic. Only in Italy.

• 
  @aboobackeraboobacker77103 ай бұрын

  Price

• 
  @musicequipments10823 ай бұрын

  I bought it for 2200 euros second hand.

• 
  @suleymanovvvv3 ай бұрын

  Made in? Yazilmirmi?

• 
  @musicequipments10823 ай бұрын

  Hello Sir. Made in Germany.

• 
  @jahnmorrby4 ай бұрын

  In this embodiment, this unit is only a microphone and instrument preamplifier. For being 8 channels, it is good and affordable.

• 
  @musicequipments10824 ай бұрын

  Respect.

• 
  @user-bp2zs2yp2l4 ай бұрын

  De250 jep shume fort & paster. Edhe DE25 me plq, bashke me N350 e RCF. Kane tingull kristal.

• 
  @musicequipments10824 ай бұрын

  Jam shumë dakord me ju sepse i përdor edhe vetë këto seri. Respekte.

• 
  @damonwolfandthewandering21554 ай бұрын

  Need adat expansion card

• 
  @musicequipments10824 ай бұрын

  Thank you. Respect.

• 
  @rcfaudioitalia61105 ай бұрын

  per live jane me te mirat

• 
  @musicequipments10825 ай бұрын

  Shumë e drejtë.

• 
  @dangullik15 ай бұрын

  Nice drivers

• 
  @musicequipments10825 ай бұрын

  Thanks.

• 
  @ayed8295 ай бұрын

  What is it woofer or Driver Located inside Montarbo

• 
  @musicequipments10825 ай бұрын

  Hello my friend. Inside it there is a 15 inch woofer of B&C made in Italy, neodymium, 500w, 8 ohm. While the high frequency driver is the B&C de 610-8, which is 80 watts. The crossover has the name of the brand stamped on it W17P. If all these are inside the speaker box, then everything should be fine.

• 
  @ayed8295 ай бұрын

  thank you so much brother@@musicequipments1082

• 
  @musicequipments10825 ай бұрын

  Respect.

• 
  @laniroli37147 ай бұрын

  Japin fort B&C. Te 💩 RCF

• 
  @musicequipments10827 ай бұрын

  Miku im, B&C janë, 400w wooferi b&c, 100w frekuenca e mesme beyma dhe 60w frekuenca e lartë b&c de250 8.

• 
  @laniroli37147 ай бұрын

  @@musicequipments1082 Ato RCF dekrarojne nga 1200-1400 watt dhe ne fund, japin si bokse makine. 😄 "Perdor kabull te trashe 2 x 4mm dhe sa me te shkurter, qe te kesh tingull sa me potent & te plote. Nuk ke ca i don kasat e shtrenjta, para ketyre.

• 
  @laniroli37147 ай бұрын

  @@musicequipments1082 Une ca te bej qe s'po ka woofera tek B&C ne Tirane. Kane mbaruar, se i kisha marre nja 2 neodinium.

• 
  @musicequipments10826 ай бұрын

  Nuk i heq asnjë presje atyre që ke thënë. Për mua serite e para të B&C janë të pavdekshme.

• 
  @laniroli37147 ай бұрын

  Nuk eshte per bass MH32. Per bass perdoret PZ32

• 
  @musicequipments10827 ай бұрын

  Nuk është projektuar për bas, por për të mesme të ulët, të mesme të lartë dhe frekuenca e lartë. Shumë dakord jam për atë që thatë më lart në lidhje me serinë PZ.

• 
  @laniroli37147 ай бұрын

  @@musicequipments1082 Behet eshte ashtu. E perdor per vocale, per live. Pse nuk i ben nje sound test. Audiophile - Sound test, ose Mortals. Ta degjojme si jep.

• 
  @grimecycle8 ай бұрын

  I don't think these are meant to be used as a single interface. Im sure these are just to extend the inputs and outputs of an existing soundcard.

• 
  @GreatKukuruzo8 ай бұрын

  Hi. Could you please help as I don't understand anything in this topic. Will this mixer be enough to power 2 speakers Yorksville YX12 ?? Thanks in advance for your help

• 
  @musicequipments10828 ай бұрын

  My friend, at first sight it looks like a simple and not a powerful one, but I have to say that for two 12 inch speakers this is perfect.

• 
  @GreatKukuruzo8 ай бұрын

  @@musicequipments1082 Thanks so much for the reply. In this case I'm gonna buy it!

• 
  @momir25578 ай бұрын

  Super

• 
  @bohred999 ай бұрын

  Focusrite tech support is very responsive. Have you tried using a regular audio cable whether mono or trs from the outputs to another device that accepts line level inputs? Then you can test a mic connected to the input of this Focusrite unit and how it processes the mic signal into the device you chain down stream from it

• 
  @musicequipments10829 ай бұрын

  Thank you my friend. I will try once more. Respect.

• 
  @stevens86149 ай бұрын

  there is no adat option in this, you can only use as an 8 channel analog mic preamp for any usb audio interface via a line input.

• 
  @musicequipments10829 ай бұрын

  Thank you my friend. I will try that. Respect.

• 
  @BobRecordsTV9 ай бұрын

  Hey, have you been able to use it eventually?

• 
  @musicequipments10829 ай бұрын

  No my friend. It has just found a place there in the corner, without getting the chance of being used just once from me.

• 
  @user-ch2wq2gs5i10 ай бұрын

  Hii

• 
  @musicequipments108210 ай бұрын

  Hi.

• 
  @zujinx519110 ай бұрын

  what happen if you don't have usb

• 
  @musicequipments108210 ай бұрын

  Well my friend, you always have the laptop where you can choose the music you want to play.

• 
  @valentingheorghe169310 ай бұрын

  The issue with all t.amp amplifiers is that they don't offer a switchable input sensitivity, from common 0.775 V RMS (0 dBU) to 1.4 V RMS (+5 dBU), in order to be used effectively with professional miximg consoles. Usually professional mixing consoles have a nominal master output level of 1.23 V RMS (+4 dBU). That being said, all t.amp amplifiers use excessive voltage gain (amplification factor), meaning more noise and more distorsion. Any professional audio amplifier worth its salt should be druven by a nominal input level of 1.4 V RMS, to hope for some quality sound.

• 
  @musicequipments108210 ай бұрын

  Well said my friend. Very well informed about this brand. To be honest I didn't have any info about this product before I owned one. At first I was impressed with the quality, but after a few minutes of full power, well, you described the rest like distortion, noise etc. Thanks for your comment.

• 
  @valentingheorghe169310 ай бұрын

  @@musicequipments1082 Don't get me wrong. I don't want to bash the brand at all, because, at the end of the day, Thomann do make some efforts to offer good products at "competitive" prices, but, from my point of view, they should focus their efforts more on supervising the production process, to ensure better quality control, and, also, to improve the specifications of their products, in order to really become a real competitor in the industry. It doesn't make sense to declare that a product is ment for professional use and, yet, it doesn't offer the option to use correct input sensitivity to matche it with a professional mixing console. Finally, let me say that when someone looks at a Crown or QSC amplifier and thinks it's expensive, think again, because when you put it to its paces you won't be disappointed by its performance and price.

• 
  @musicequipments108210 ай бұрын

  Brother, I have never been disappointed by my QSC and CROWN amps. I totally agree with the expression ''You get what you pay''. I totally agree with you . Respect.

• 
  @mrproblemchild88able10 ай бұрын

  Fbt

• 
  @Mennantonio11 ай бұрын

  Se montarbo mi offrisse un dj set in regalo dj cat sound n1 gli farebbe feste gratis per 4 anni a contratto.🎉W MONTARBO.sempre il top dei top a ne piace molto

• 
  @musicequipments108211 ай бұрын

  I have bought these Montarbo speakers as second hand, but they have never failed me, never, in all kinds of environments. They are real power and not for soft ears.

• 
  @dirkgriese97311 ай бұрын

  Schöne Pa Anlage

• 
  @musicequipments108211 ай бұрын

  Danke mein freund.

• 
  @rafapucpr11 ай бұрын

  It sounds very good, but I think it was too low in the video.

• 
  @musicequipments108211 ай бұрын

  You are absolutely right my friend, but due to the high temperature I had to record with my windows opened and you know the noise that comes from the neighbourhood, so I had to lower the gain a bit.

• 
  @user-mf7gw9bg8b11 ай бұрын

  Neden o 0 da ne özellikte

• 
  @musicequipments108211 ай бұрын

  Hello. We just turned it on and later on we worked with the features.

• 
  @SG-4u11 ай бұрын

  All you need is a cheap audio interface with ADAT. That Octopre is great. Also, you can sell it if you don’t need that much I/O.

• 
  @musicequipments108211 ай бұрын

  Thank you for the information my friend.

• 
  @dystortia662611 ай бұрын

  No stereo input?

• 
  @musicequipments108211 ай бұрын

  No stereo input, but yet still nice sound.

• 
  @dystortia662611 ай бұрын

  @musicequipments1082 why would you use this if you have stereo system. Any benefits? I just got given a power pod 620 and don't see a use for it as I have a stereo pa

• 
  @musicequipments108211 ай бұрын

  My dear friend, I totally know that if you are dealing with music gears, you would say no to a lot of stuff because you get addicted to these things. I have used it maybe once or twice at home, but never for serious things. I just wanted to have this, no reason at all.

• 
  @sagarjiitaly1277 Жыл бұрын

  Price

• 
  @musicequipments1082 Жыл бұрын

  Not for sale my friend, but long time ago they were very expensive.

• 
  @ghjkldss8421 Жыл бұрын

  The octopre is an Adat extension to an interface, rather than an interface in itself

• 
  @musicequipments1082 Жыл бұрын

  Thanks my friend.

• 
  @siddharthgupta6601 Жыл бұрын

  Hey, Man I have $1000-1200 USD FOR DJ CONTROLLER can you please suggest me the best pioneer dj controller in 2023

• 
  @musicequipments1082 Жыл бұрын

  My friend, this is a million dollar question. It always depends on what you are planning to play, or where you are going to play. I really miss my Pioneer SB2 , even though I have been testing lots of other consoles. I mostly play on weddings, so I do not need to many effects while playing. And do not get affected by publicity. Choose one console and know all the knobs it has, then you can play professionally with it. The best on the market... Can't really tell, because it depends on the budget and the purpose. RESPECT MY FRIEND.

• 
  @siddharthgupta6601 Жыл бұрын

  @@musicequipments1082 This comment(reply) of yours will really help me a lot in choosing my console. I am planning to get DDJ 800 as it suits my budget and I will be playing in clubs, lounges, parties, IG reels and on youtube. BTW I am a music producer and trying to get into DJing as I love it. This is going to be my first DJ console ever.

• 
  @siddharthgupta6601 Жыл бұрын

  @@musicequipments1082 bro can you tell me is ddj 800 really good in 2023 and is rekordbox really good as compared to serato?

• 
  @siddharthgupta6601 Жыл бұрын

  @@musicequipments1082 And brother this is my last question. It is better to buy a new DJ controller or buy a second hand. I found 1-2 guys selling their ddj 1000 for $900-1000.

• 
  @musicequipments1082 Жыл бұрын

  My friend, I would say go for it. Do not spend too much. The 800 has a good soundcard and it has some very nice features to amaze your audience.

• 
  @AqeelAlobiedy Жыл бұрын

  روعة

• 
  @laniroli3714 Жыл бұрын

  Phonic = Alto

• 
  @musicequipments1082 Жыл бұрын

  I have an Alto amp as well, but I like this one the most. Respect.

• 
  @laniroli3714 Жыл бұрын

  @@musicequipments1082 Same thing. Only logo is diferent.

• 
  @HydroBas Жыл бұрын

  🤌👌👍

• 
  @owennewman1054 Жыл бұрын

  I got the same mixer but the peak signal light is on ,at all channels any idea where do I start with trouble shooting

• 
  @musicequipments1082 Жыл бұрын

  I guess that it must have a short circuit somewhere and the peak stays on. Check the input signals.

• 
  @owennewman1054 Жыл бұрын

  @@musicequipments1082 thanks fixed the problem,ba D solder joints

• 
  @musicequipments1082 Жыл бұрын

  @@owennewman1054 happy for you.

• 
  @MrRicardocabiao Жыл бұрын

  Got myself just now phonic powerpod 615

• 
  @musicequipments1082 Жыл бұрын

  Hope it works fine for you, I am really satisfied with it.

• 
  @djplenitude Жыл бұрын

  Can it work with virtual DJ ?

• 
  @69_MK Жыл бұрын

  he is literally using it with Virtual Dj in the video can you not see ?

• 
  @musicequipments1082 Жыл бұрын

  Yes, it can.

• 
  @hanaadzic271 Жыл бұрын

  Is it worth it to buy?

• 
  @musicequipments1082 Жыл бұрын

  Yeap man.

• 
  @joshuasaucier3834 Жыл бұрын

  What should I buy? I Had a small shitty numark and I sold it to upgrade

• 
  @musicequipments1082 Жыл бұрын

  Numark doesn't get even close to this my friend. This has a great sound card and tons of features.

• 
  @movemntstv12 Жыл бұрын

  I love it

• 
  @atajanovfarhad7211 Жыл бұрын

  Like🖤🖤🖤😎😎😎😎😎

• 
  @cruzogarcia1096 Жыл бұрын

  Wow great design high,mids lows

• 
  @musicequipments1082 Жыл бұрын

  Thank you! Cheers!

• 
  @fireacross3249 Жыл бұрын

  I love Jon Lajoie songs ❤ hahaha

• 
  @musicequipments1082 Жыл бұрын

  Respect.

• 
  @XxDANIEL821xX Жыл бұрын

  Is the ddj-800 good these days?

• 
  @musicequipments1082 Жыл бұрын

  Well, I can't say it is the best, but at least it has a good soundcard and gives crisp sound.

• 
  @seitonkumokoroye2059 Жыл бұрын

  These are really good?

• 
  @musicequipments1082 Жыл бұрын

  They are punchy used in with the proper crossover.

• 
  @rcfaudioitalia6110 Жыл бұрын

  Nxirrte 72-73 volt per kanal kjo. 73 x 73 = 5329 ÷ 4 ohm= 1332 watt rms ne 4 ohm per kanal. 👍👍👍

• 
  @santiagomaldonado4499 Жыл бұрын

  What is your motherboard, the model I mean. I'll take a look from there and let you know if you can or what you would have to get.

• 
  @musicequipments1082 Жыл бұрын

  Hello my friend. It didn't have a dedicated port, but I removed the wireless port and installed the M2. Then I adapted the wireless with an adaptor. Thanks a lot for your help my friend.