Looks like my daily driver, I remember looking at this truck in the 1980s-early 90s Tamiya Catalog, and working on my frog with the Trinity Drag motor, now i pretty much banned myself from hobby stores 😅 and there's one across the street! But really cool to see Tamiya re-releasing the old 4 wheel memories, really cool, I've got a crappie traxxas slash thats to fast to enjoy 😅 and that's as far as this 49 year olds hobby addiction is going! My 2003 Toyota Tacoma Solid Axle Swap is where my money goes and my 2003 Harley Davidson FXDP ! But anyhow, great video, ill check out some more, thanks brother
@MikesRCWorld10 күн бұрын
Thanks for tuning and watching !
@hobertjr16 күн бұрын
NICE I JUST ORDERED MINE IN BLACK
@Jfitzroy1Ай бұрын
Very nice, any tire rubbing on the body?
@MikesRCWorldАй бұрын
I've only driven once or twice but I didn't have any issues. Keep in mind it's not set up for rock crawling so and the suspension is set tight so there is a lot of flex which could result in rubbing.
@TheJman4071Ай бұрын
Hey man I’m looking at getting these wheels but I’m confused on what glue I need to use could you let me know what glue ? Thanks man beautiful rig btw!!
@MikesRCWorldАй бұрын
some E6000 is what I would recommend for gluing tires to aluminum wheels
@andrewsumner53882 ай бұрын
Great lookin truck I would leave it on the shelf as well!.. The chrome chassis and wheels let alone the custom paint are a notch above the rest.
@homeisneptune93152 ай бұрын
The highlight is at 2:22 man those all black Osiris D3 you’re wearing are sick dude.
@MikesRCWorld2 ай бұрын
Haha thanks man, I still have one more pair NIB too 😎
@mvooo2 ай бұрын
Wow such a nice clod! Can you tell something more about the car (blackfoot?) sitting next to it? What has been done to it?
@MikesRCWorld2 ай бұрын
It’s a vintage Blackfoot with a chrome chassis, Trinity shocks, sees wheels, with an ultrahive painted body. I’ll have a video on it eventually
@fezzolare3 ай бұрын
your paint work is off the hook
@fezzolare3 ай бұрын
working in my lab and binge watching your channel along with Rceveryday
@MikesRCWorld2 ай бұрын
Thanks for the support!
@claytonbarnaby50213 ай бұрын
Hi could you contact Adam about the custom build remote control plow truck pm me I'll give you his number We just watch your video he wants one were in ns
@OGRadGrow3 ай бұрын
Nice 👍🏾💯
@fezzolare3 ай бұрын
love that red pick up in case ...what steel body is that ? a Tonka
@fezzolare3 ай бұрын
Describes that you have on your Scottsdale did you make those yourself or is there somewhere I can purchase those I really love them they look terrific
@Bluecollar_obs_limo3 ай бұрын
Dude it floats 🤘🤣🤣🤣 I NEED ONE!
@Bluecollar_obs_limo3 ай бұрын
Nobody can get them or anything because YOU HAVE them😤🤷🏼🤣🤣🤣🤣🤣🤣
@MikesRCWorld2 ай бұрын
Gotta collect them all !!
@RcDungeon3 ай бұрын
Very nice!
@takenotez8083 ай бұрын
Got any Hesse front axles for sale?
@MikesRCWorld3 ай бұрын
Sorry no spare hesse stuff, his stuff is hard to come by as it sells out quickly
@user-pc4bd1bj6j4 ай бұрын
I have a Tamiya Toyota Hilux High Lift. I would love to upgrade to a brushless system but I'm worried about breaking the gears in the transmission. Do you have any suggestions? Have you ever seen a metal or brass/bronze gear upgrade for the transmission or is there a brushless motor that I can run safely?
@MikesRCWorld4 ай бұрын
I personally like the spektrum 2in1 combos. I’m sure 1400kv system will work fine for that. There was someone at one point that made gears for those but it’s been a long long time since I’ve messed with the high lift based truck. I’m also not a big multi speed fan and tend to ditch those types of trans in favor or a scale driveline from GCM, RC4WD, or SSD.
@Larry_g_4 ай бұрын
There making twisters movie part two now Good work
@MikesRCWorld4 ай бұрын
Yeah I’m excited to see it !
@McRcFly4 ай бұрын
I have a vintage Clod but its got the grille with no logo at all.. its the same but without the bowtie.. Also have a "newer" one with the big stupid 4x4x4 on it.... what were they thinking 😂
@MikesRCWorld4 ай бұрын
Tamiya lost the licensing to use the Chevrolet “bow tie” and if I had to guess was further forced to change the grill even more to the 4x4x4 one
@McRcFly4 ай бұрын
@@MikesRCWorld yes but it just made it so toy like.. they should hace stuck with plain one in the end.
@MikesRCWorld4 ай бұрын
@@McRcFly couldn’t agree more
@McRcFly4 ай бұрын
Beautiful Clod 👍
@user-go1uc4wz8j4 ай бұрын
How to get spare parts of this GTR
@OBS4ever164 ай бұрын
Where did you get the body?
@MikesRCWorld4 ай бұрын
It is custom made from 2 tamiya king blackfoot bodies
@PaulSchryer4 ай бұрын
@@MikesRCWorldNot to "butt-in..." I love to hear of RC enthusiast goin' the extra mile to make a custom RC body, other style, but especially the crawler niché !! 👍 💯 It takes quite a bit of patience & more dedication to develop the "final result" we all desire !! 👌 Way Cool !!!
@MikesRCWorld4 ай бұрын
@@PaulSchryer no doubt about that
@jesseharriott42535 ай бұрын
Separate that box lol I ordered just the body and it was 149 shipping was 72 then my bank was charged 310$! This thing better be freaking nice lol
@MikesRCWorld5 ай бұрын
Believe me it’s tempting, I did that to the Marty Mcfly edition truck. You’ll like it for sure
@slowblueoval19975 ай бұрын
Awesome. The wheels and tires are bad ass
@MikesRCWorld5 ай бұрын
Wheels and tires choice can sometimes really make or break the truck 😎
@jeffdedrick23125 ай бұрын
Awesome collection you have. Do you remember the name of the manufacture of the swaybar kit for the black foot. I have one on my truck and it’s anodized blue but I cannot remember the name of the manufacture.
@MikesRCWorld5 ай бұрын
Could be a trinity or a Parma. A lot of companies had the same one back then and they were just re branded
@Oliver-lg5hw5 ай бұрын
I’m new to RC and looking to buy my first monster truck. love that huge blue & white monster truck on the table besides shodogs. What is the make and model please, thanks.
@MikesRCWorld5 ай бұрын
A Tamiya clodbuster
@Oliver-lg5hw5 ай бұрын
@@MikesRCWorld how come it looks SO tall? where did you get the body from man?
@MikesRCWorld5 ай бұрын
@@Oliver-lg5hw it has after market shocks and a 4 link kit so it sits taller then stock. The body is a stock but very modified clodbuster body
@Oliver-lg5hw5 ай бұрын
@@MikesRCWorld thanks for the details. Would it be possible for you to review it on your channel? I’d love to hear more about it 👍🏻
@MikesRCWorld5 ай бұрын
@@Oliver-lg5hw Sure, I’ll work on that. In the meantime you can read about it here: www.rccaraction.com/slightly-altered-recreating-a-1993-rcca-readers-ride-tamiya-clod-buster/
@rccrawler705 ай бұрын
What's up...I just bought it and I love it but the suspension is too hard. RC4WD is aware of this problem in their chassis but has not corrected it and the solution they sell is too expensive. RC4WD Teraflex Revolver Shackle Your Price: $35.99 per set and 4 sets are needed. to Optimize the suspension. Excellent video.! Beautiful cars!
@MikesRCWorld5 ай бұрын
The the suspension out of the box is stiff, however it is not a design flaw. Leaf sprung suspension needs to be broken in and the best way to do that is to drive and use the truck. A long with that are a few other steps that cost nothing to do other than your time. For starters, remove the internal springs from the shocks in all 4. Next, you can remove one of the leafs from the leaf packs this will help aid in breaking them in, you may need to put it back in after they settle and break in. Under no circumstances would I recommend revolvers or those Z box things… that’s all junk IMO. If you want a leaf suspension set up that’s going to really really flex and work well you want a twisted fab leaf kit, front and rear with the buggy leaf, with pricey custom shocks and towers. You also need an A&M garage shackle flip as well. That full system will next you the best flex and performance. facebook.com/share/toaV4wnZPpPJ3VSD/?mibextid=K35XfP
@Bad1flip5 ай бұрын
So sick! I’ve always loved these 90s 4Runners. Looks very scale.
@MikesRCWorld5 ай бұрын
Appreciate the props 🤙🏻and thanks for watching
@dasnadasna-vh1mp5 ай бұрын
Damn das a fuckn steal!!!..I'll buy it from you for $800😅
@dasnadasna-vh1mp5 ай бұрын
Niice truck brother...lost your email..was waiting on you bout the mrp hr
@MikesRCWorld5 ай бұрын
Still had your number sent you a text message
@chucknorris-ec1pt5 ай бұрын
What brand of tires are they
@MikesRCWorld5 ай бұрын
Vintage duratrax V spikes no longer in production
@Pedar015 ай бұрын
Sick!
@kjflyte50885 ай бұрын
Ill never buy a rc4wd piece. Everything ive ever bought from them was complete garbage .
@MikesRCWorld5 ай бұрын
Sorry to hear that… they make a lot of great products IMO.
@carloshasbun99956 ай бұрын
That is one cool looking truck for sure❤
@kevinsmith-qw1uw6 ай бұрын
I still have that very RCCA magazine. It's what got my interest sparked in building these vehicles.
@MikesRCWorld6 ай бұрын
That’s awesome 👏🏻 I wish had all my copies still. I have some but not all.
@MidCoast6 ай бұрын
wow, just what I needed, this is a must build now.
@MikesRCWorld6 ай бұрын
Fun build for sure
@IowaBudgetRCBashers6 ай бұрын
I love the 80’s Z stripes on the body. I’ve never seen that chassis before
@MikesRCWorld5 ай бұрын
Old sassy chassis, popular amongst the old school crowd but pricey to find and difficult to obtain now a days
@IowaBudgetRCBashers6 ай бұрын
My first hobby grade RC was a qd midnight pumpkin. Shortly after I got that my cousin gave me his Blackfoot. I absolutely love the Blackfoot. My original is long gone but I restored a vintage Blackfoot last year. I painted the body black with gold flake and 2k automotive clear. I also found an old parma lexan Blackfoot body I did up as awesome kong 2 my favorite 80’s ford monster truck.
@MikesRCWorld6 ай бұрын
Hard to go wrong with a Blackfoot 😎
@IowaBudgetRCBashers6 ай бұрын
That’s a bad ass clod. Absolutely love the bow tie bumper.. my clods are mostly stock but if I had the money, this would be the way I’d build it.. I dig the flame job too.
@MikesRCWorld6 ай бұрын
Thanks man! Check out Arch Fabrication he makes Bow tie bumpers for the clods
@carloshasbun99956 ай бұрын
Very nice Mike, definitely will look into these for my highlift
@MikesRCWorld6 ай бұрын
Thanks man! You’ll like them for sure
@FYRC156 ай бұрын
Glad you’re back making some content. I feel the extra flavor you bring. It’s tough to do in this market if you can’t buy every new release that comes out. Great work.
@MikesRCWorld6 ай бұрын
Thanks man! Appreciate the feedback and support. I’m pretty selective about what I build so I’m not a person to just buy something because it’s new. Rather work on something rad
@skywalkercorp6 ай бұрын
What a beautiful collection.
@MikesRCWorld6 ай бұрын
Thanks! And thanks for watching
@GreenMachineRC6 ай бұрын
Do you know what length the yellow strut/shocks are from the blade to the servo mount?
@MikesRCWorld6 ай бұрын
Not off the top of my head but I can measure when and get back to you
@tombrihn56506 ай бұрын
I don't have anything that nice but I do have 4 or 5 bowties that it's time to get rid of.
@MikesRCWorld6 ай бұрын
The grill and tailgate fetches some coin all by itself so you’ll do well with complete trucks
@mustang88128226 ай бұрын
I'm sure it's a mixture of hopups,,but that's the best looking Blackfoot,monsterbeatle, Frog. I've seen
@MikesRCWorld6 ай бұрын
This is actually a kit from RC4WD! It does have some upgrades and changes but you can buy the a K10 from them rtr
@carloshasbun99956 ай бұрын
Love these runner bodies, sweet kc lights
@MikesRCWorld6 ай бұрын
Thanks ! RC4WD did a good job on the v2 KC lights. Wish they’d made them in chrome now
@allscalerc6 ай бұрын
Sweet 4Runner!
@MikesRCWorld6 ай бұрын
Thank you !
@danweiss13716 ай бұрын
Love that truck !!!!!
@MikesRCWorld6 ай бұрын
It’s a fan favorite for sure!
@danweiss13716 ай бұрын
So nice !!! Love the look!! Takes me back to my youth 16-17 I had a 1+1 super rusty !! But a good truck Michigan winter salt 😫
@MikesRCWorld6 ай бұрын
I feel ya on that, I am in the rust belt as well. My 86 4runner wasn’t too bad after I replaced the fenders and cut out the quarters some
Пікірлер
Looks like my daily driver, I remember looking at this truck in the 1980s-early 90s Tamiya Catalog, and working on my frog with the Trinity Drag motor, now i pretty much banned myself from hobby stores 😅 and there's one across the street! But really cool to see Tamiya re-releasing the old 4 wheel memories, really cool, I've got a crappie traxxas slash thats to fast to enjoy 😅 and that's as far as this 49 year olds hobby addiction is going! My 2003 Toyota Tacoma Solid Axle Swap is where my money goes and my 2003 Harley Davidson FXDP ! But anyhow, great video, ill check out some more, thanks brother
Thanks for tuning and watching !
NICE I JUST ORDERED MINE IN BLACK
Very nice, any tire rubbing on the body?
I've only driven once or twice but I didn't have any issues. Keep in mind it's not set up for rock crawling so and the suspension is set tight so there is a lot of flex which could result in rubbing.
Hey man I’m looking at getting these wheels but I’m confused on what glue I need to use could you let me know what glue ? Thanks man beautiful rig btw!!
some E6000 is what I would recommend for gluing tires to aluminum wheels
Great lookin truck I would leave it on the shelf as well!.. The chrome chassis and wheels let alone the custom paint are a notch above the rest.
The highlight is at 2:22 man those all black Osiris D3 you’re wearing are sick dude.
Haha thanks man, I still have one more pair NIB too 😎
Wow such a nice clod! Can you tell something more about the car (blackfoot?) sitting next to it? What has been done to it?
It’s a vintage Blackfoot with a chrome chassis, Trinity shocks, sees wheels, with an ultrahive painted body. I’ll have a video on it eventually
your paint work is off the hook
working in my lab and binge watching your channel along with Rceveryday
Thanks for the support!
Hi could you contact Adam about the custom build remote control plow truck pm me I'll give you his number We just watch your video he wants one were in ns
Nice 👍🏾💯
love that red pick up in case ...what steel body is that ? a Tonka
Describes that you have on your Scottsdale did you make those yourself or is there somewhere I can purchase those I really love them they look terrific
Dude it floats 🤘🤣🤣🤣 I NEED ONE!
Nobody can get them or anything because YOU HAVE them😤🤷🏼🤣🤣🤣🤣🤣🤣
Gotta collect them all !!
Very nice!
Got any Hesse front axles for sale?
Sorry no spare hesse stuff, his stuff is hard to come by as it sells out quickly
I have a Tamiya Toyota Hilux High Lift. I would love to upgrade to a brushless system but I'm worried about breaking the gears in the transmission. Do you have any suggestions? Have you ever seen a metal or brass/bronze gear upgrade for the transmission or is there a brushless motor that I can run safely?
I personally like the spektrum 2in1 combos. I’m sure 1400kv system will work fine for that. There was someone at one point that made gears for those but it’s been a long long time since I’ve messed with the high lift based truck. I’m also not a big multi speed fan and tend to ditch those types of trans in favor or a scale driveline from GCM, RC4WD, or SSD.
There making twisters movie part two now Good work
Yeah I’m excited to see it !
I have a vintage Clod but its got the grille with no logo at all.. its the same but without the bowtie.. Also have a "newer" one with the big stupid 4x4x4 on it.... what were they thinking 😂
Tamiya lost the licensing to use the Chevrolet “bow tie” and if I had to guess was further forced to change the grill even more to the 4x4x4 one
@@MikesRCWorld yes but it just made it so toy like.. they should hace stuck with plain one in the end.
@@McRcFly couldn’t agree more
Beautiful Clod 👍
How to get spare parts of this GTR
Where did you get the body?
It is custom made from 2 tamiya king blackfoot bodies
@@MikesRCWorldNot to "butt-in..." I love to hear of RC enthusiast goin' the extra mile to make a custom RC body, other style, but especially the crawler niché !! 👍 💯 It takes quite a bit of patience & more dedication to develop the "final result" we all desire !! 👌 Way Cool !!!
@@PaulSchryer no doubt about that
Separate that box lol I ordered just the body and it was 149 shipping was 72 then my bank was charged 310$! This thing better be freaking nice lol
Believe me it’s tempting, I did that to the Marty Mcfly edition truck. You’ll like it for sure
Awesome. The wheels and tires are bad ass
Wheels and tires choice can sometimes really make or break the truck 😎
Awesome collection you have. Do you remember the name of the manufacture of the swaybar kit for the black foot. I have one on my truck and it’s anodized blue but I cannot remember the name of the manufacture.
Could be a trinity or a Parma. A lot of companies had the same one back then and they were just re branded
I’m new to RC and looking to buy my first monster truck. love that huge blue & white monster truck on the table besides shodogs. What is the make and model please, thanks.
A Tamiya clodbuster
@@MikesRCWorld how come it looks SO tall? where did you get the body from man?
@@Oliver-lg5hw it has after market shocks and a 4 link kit so it sits taller then stock. The body is a stock but very modified clodbuster body
@@MikesRCWorld thanks for the details. Would it be possible for you to review it on your channel? I’d love to hear more about it 👍🏻
@@Oliver-lg5hw Sure, I’ll work on that. In the meantime you can read about it here: www.rccaraction.com/slightly-altered-recreating-a-1993-rcca-readers-ride-tamiya-clod-buster/
What's up...I just bought it and I love it but the suspension is too hard. RC4WD is aware of this problem in their chassis but has not corrected it and the solution they sell is too expensive. RC4WD Teraflex Revolver Shackle Your Price: $35.99 per set and 4 sets are needed. to Optimize the suspension. Excellent video.! Beautiful cars!
The the suspension out of the box is stiff, however it is not a design flaw. Leaf sprung suspension needs to be broken in and the best way to do that is to drive and use the truck. A long with that are a few other steps that cost nothing to do other than your time. For starters, remove the internal springs from the shocks in all 4. Next, you can remove one of the leafs from the leaf packs this will help aid in breaking them in, you may need to put it back in after they settle and break in. Under no circumstances would I recommend revolvers or those Z box things… that’s all junk IMO. If you want a leaf suspension set up that’s going to really really flex and work well you want a twisted fab leaf kit, front and rear with the buggy leaf, with pricey custom shocks and towers. You also need an A&M garage shackle flip as well. That full system will next you the best flex and performance. facebook.com/share/toaV4wnZPpPJ3VSD/?mibextid=K35XfP
So sick! I’ve always loved these 90s 4Runners. Looks very scale.
Appreciate the props 🤙🏻and thanks for watching
Damn das a fuckn steal!!!..I'll buy it from you for $800😅
Niice truck brother...lost your email..was waiting on you bout the mrp hr
Still had your number sent you a text message
What brand of tires are they
Vintage duratrax V spikes no longer in production
Sick!
Ill never buy a rc4wd piece. Everything ive ever bought from them was complete garbage .
Sorry to hear that… they make a lot of great products IMO.
That is one cool looking truck for sure❤
I still have that very RCCA magazine. It's what got my interest sparked in building these vehicles.
That’s awesome 👏🏻 I wish had all my copies still. I have some but not all.
wow, just what I needed, this is a must build now.
Fun build for sure
I love the 80’s Z stripes on the body. I’ve never seen that chassis before
Old sassy chassis, popular amongst the old school crowd but pricey to find and difficult to obtain now a days
My first hobby grade RC was a qd midnight pumpkin. Shortly after I got that my cousin gave me his Blackfoot. I absolutely love the Blackfoot. My original is long gone but I restored a vintage Blackfoot last year. I painted the body black with gold flake and 2k automotive clear. I also found an old parma lexan Blackfoot body I did up as awesome kong 2 my favorite 80’s ford monster truck.
Hard to go wrong with a Blackfoot 😎
That’s a bad ass clod. Absolutely love the bow tie bumper.. my clods are mostly stock but if I had the money, this would be the way I’d build it.. I dig the flame job too.
Thanks man! Check out Arch Fabrication he makes Bow tie bumpers for the clods
Very nice Mike, definitely will look into these for my highlift
Thanks man! You’ll like them for sure
Glad you’re back making some content. I feel the extra flavor you bring. It’s tough to do in this market if you can’t buy every new release that comes out. Great work.
Thanks man! Appreciate the feedback and support. I’m pretty selective about what I build so I’m not a person to just buy something because it’s new. Rather work on something rad
What a beautiful collection.
Thanks! And thanks for watching
Do you know what length the yellow strut/shocks are from the blade to the servo mount?
Not off the top of my head but I can measure when and get back to you
I don't have anything that nice but I do have 4 or 5 bowties that it's time to get rid of.
The grill and tailgate fetches some coin all by itself so you’ll do well with complete trucks
I'm sure it's a mixture of hopups,,but that's the best looking Blackfoot,monsterbeatle, Frog. I've seen
This is actually a kit from RC4WD! It does have some upgrades and changes but you can buy the a K10 from them rtr
Love these runner bodies, sweet kc lights
Thanks ! RC4WD did a good job on the v2 KC lights. Wish they’d made them in chrome now
Sweet 4Runner!
Thank you !
Love that truck !!!!!
It’s a fan favorite for sure!
So nice !!! Love the look!! Takes me back to my youth 16-17 I had a 1+1 super rusty !! But a good truck Michigan winter salt 😫
I feel ya on that, I am in the rust belt as well. My 86 4runner wasn’t too bad after I replaced the fenders and cut out the quarters some