Пікірлер

• 
  @AndrewKiethBoggs21 сағат бұрын

  Amazing. Thank you so much. Looking forward to going through the rest of the playlist and supporting as soon as I finish my case design.

• 
  @parrottm7626221 сағат бұрын

  I love how your tutorial flow just fits my way of thinking. Glad I found this channel. Thank you immensely for your time and efforts.

• 
  @NAVARROhabitatworkshopКүн бұрын

  I'm learning Ondsel/freecad for designing furniture. This feature is great! Still trying to figure out how to model turned wood though, curves are tricky

• 
  @leroycasterline1122Күн бұрын

  It took me a few tries before I understood that I have to click the center point or rim of the circle I've selected before I click the vertex to which I wish to move or copy the circle. This isn't very intuitive. Clicking anywhere other than the center or rim of the circle selects an offset from the center point which is applied to the destination vertex. It wouldn't be implemented this way if there wasn't a purpose, but I'm not sure what that purpose might be. Can you clairify?

• 
  @1cey235Күн бұрын

  Thanks for the tutorials, it's very helpful.

• 
  @waynefilkins8394Күн бұрын

  I'm trying to basically make a bunch of parts to put together a large robotics project. I'm starting with just a part of it, which is basically just an arm of the robot (it will have multiple arms for multiple tasks so just starting with one arm) and since med/large servos are super expensive I found a way to make my own cheap, so each servo I use will also be broken down into parts. I already designed 1 servo in freecad, but it was a year ago and I have been using fusion 360 so I'm super rusty now. Also I want to be able to move this arm within freecad to show my friend how it's going to move after I construct the whole thing for real. I never learned that part before. So my question is, would this be a good tutorial series for brushing up on things and also being able to put all the parts together to make an assembly or animation or w/e they call it in freecad, and if not can anyone point me to one? I don' t want to commit a bunch of time to the wrong tutorial for the task at hand, and I don't know a lot of the terminology for what I'm trying to do so it's difficult to just look at the titles and know if it's a good fit, TIA!

• 
  @waynefilkins8394Күн бұрын

  I do see one called "assembly with fasteners" which kind of sounds maybe like what I'm trying to do

• 
  @erdevukКүн бұрын

  How do you rotate the view at 14:50 ? Tried various button variations - not working. Thanks

• 
  @PixelwasterКүн бұрын

  I was wondering if you could add a verbal cue for the shortcuts. Something like " Select the horizontal constraint here or L on they keyboard". Back in the dark side days when learning Photo$hop, the instructor would add in the shortcut keys. Sometimes it was a bit clumsy because most of the shortcuts had modifier keys. Mac and Windows different modifiers with the same names (alt for Mac ctrl for Windows ). Halfway through the class you were thinking the shortcuts and by the end you were using them. Note: Some of the shortcuts started with the joke "Hold down the right side of the keyboard and press...."

• 
  @CraigLYoungКүн бұрын

  Thanks for sharing 👍

• 
  @vladimirastrelin1719Күн бұрын

  Another example of an excellent lesson. Thanks, Darren ! This is a kind of lessons we all need. Please continue, you've got an incredible talent of making difficult things really simple and easy to understand. Thank you !

• 
  @haraldlonn898Күн бұрын

  Thank you. I really needed this lesson. I figured out that the program I used before had different order of operation and it got me confused. Great beginner lesson. Thanks.

• 
  @MarekCezaryWojtaszekКүн бұрын

  Thanks for the new series! I went through the old one some time ago since I needed to manage the basic fast (there was a time sensitive need), and now, since I have more time, I can do the lessons more systematically and with no rush. So it is great it is now based on the newest version of Freecad. Can't wait for the next lessons. I think I will join your patrons community pretty soon.

• 
  @loicnicolas5002Күн бұрын

  Bonjour Darren, revenir aux fondamentaux produit du contenu intéressant et formateur, personnellement, ce que je recherche sur KZread. Merci pour ce tuto très intéressant 👍

• 
  @serp96presКүн бұрын

  get a mouse

• 
  @ahrengroesch87742 күн бұрын

  I found the options that were making tutorials impossible to follow as I was missing a lot of icons on the tools bar. Go into Preferences > Sketcher > General, and uncheck "Unify Coincidental and PointOnObject", "Auto tool for Horizontal/Vertical", and set Dimensioning constraints: to "Separated tools". Then you will get all the icons they have in the tutorials.

• 
  @brdi19572 күн бұрын

  Nice this 0.22 version. Nice video's. Don't know how you do it. First a great series on version 0.19 and now starting all over again. Chapeau. However, In the current weekly build I miss specific items on the toolbars (e.g. the Constrain coincident on the Sketcher toolbar). In Customizing the toolbars I am not able to add items to the existing toolbars and rearrange them. The only option I find is to add a sub-toolbaar and then add the Coincincident constrain to that sub... I then have the functionality available but can not reaarrange the icons with the icons that were availble in the first place. Am I missing something?

• 
  @Laffen472 күн бұрын

  I'm finding this course very useful

• 
  @GregEwing2 күн бұрын

  Says something when you need a tutorial to move something. Even worse half these things Don't work when i try. Example trying to move a part in the part Design gives no movement arrows! I just keep hitting this wall. Click on something to do something with. Nope. Got first go to this other workbench. Then make it compound then go somewhere else then move then ... It is like a and then story. WHY? Why is a basic UI/UX of click on something not a freecad thing. Is it like -- stuff other cads, we don't want a few click work flow. I came to freecad as onshape have hiked prices. Don't get me started with other cad EULAs. But WHY after all these years are we still stuck with such a wall of absolutely opaque workflow and tools? I am stuck trying to make free cad work. But dam freecad is not making it easy.

• 
  @rufusquarcoo51063 күн бұрын

  Hi, Am new to 3D freecad, please I'll like to know the difference between stl file and gcode and how to save ito gcode. Thanks

• 
  @ahrengroesch87743 күн бұрын

  I love the aging eyesight recommendations.

• 
  @draftshocks73173 күн бұрын

  Theres is no point increasing the number of triangles of ur CAD Models when importing to Slicers for 3D Printing. Tessimation is only used to maintain smoothness of CAD Models when using them in 3D softwares such as Blender, Maya or ZBrush, CAD models are not editable in tyese sofwares, you need to retopologies them to be useful, so why retopologies if u can create ur models inside these models? CAD models are not Mesh that is why when u imported them at low triangle counts they lost their shape. Vice versa, mesh models are not editable in CAD Sofwares because beause mesh are made o' point, edges and faces.

• 
  @LT728844 күн бұрын

  I have been making tutorials the last few days for the CFDof workbench for all the high powered rockets i make. CFD and FEM in ondsel (freecad) is really powerful and easy. Ondsel has done some EXCELLENT development for both workbenches. I also did a few tutorials on how to use FEM in freecad and ondsel with a wind turbine blade that i show how to model based off of your videos on airfoils haha. I use prepomax as well since it is easy, opensource AND can mesh STL files

• 
  @conscientiously4 күн бұрын

  DUDE! I’ve spent HOURS trying to figure out how to work multiple bodies. This video is so helpful!!! I’m so happy!!

• 
  @leroycasterline11224 күн бұрын

  I ran the analysis again after decimating and found non-manifolds and surface folds. It took a few more analyze/repair cycles to get a clean mesh.

• 
  @aljosacar54734 күн бұрын

  hello I made a cylindrical cam using this technique. I wonder how you join the two bodies together?

• 
  @victorldunn96384 күн бұрын

  A question - At ~14:00 where the approximate surface is created - the surface does not fully follow the curve of the sketch from the side view image. Is it simply that one just needs to add more free-hand curves between the font and rear split curves to get a better approximation?

• 
  @steffenbaum60945 күн бұрын

  hello to all, I hope you are doing well. please I have 2 issues with FreeCAD; 1) even after deleting and deinstallation, cleaning cache. Still not see the top toolbar (File, Edit,View…….) 2) issue I have big issues with import from *.dxf files. Circles are square. Tried all help what I found in the net but nothing help. I use version 0.21.2 Any ideas are very welcome please

• 
  @foxbatviper5 күн бұрын

  so I do a rectangle and it is locked down. I close, yours reads name-body-sketch, on mine it reads name-sketch-body, and when i try to pad the sketch it says i do not have an active body? any ideas?

• 
  @MangoJellySolutions4 күн бұрын

  By what you have described your body wasn't active when you created the sketch. To get around this right click on the body and select, toggle active body. The body should be in bold. Any new sketches will be created inside the body. If you have a sketch outside the body, drag and drop it inside. Hope that helps.

• 
  @dombthekid5 күн бұрын

  I really appreciate your content but I’m dead broke, so I’m leaving a like and a comment to help engagement. It’s not much but it’s all I can give right now

• 
  @MangoJellySolutions4 күн бұрын

  No problems appreciate the like 😊👍👍👍👍

• 
  @sokts54225 күн бұрын

  thanks for your fine videos! i hope i'm not bothering if i ask you something that is troubling me for very long time. i am trying to make a 3d printable cookie cutter or signature from an image. there is no problem if i manually make the sketch for a simple image but many issues arise if it's a more detailed image. i put it in inkscape to make an .svg file but freecad finally sees b-splines and that gives errors...

• 
  @BobWidlefish5 күн бұрын

  Thank you!

• 
  @conscientiously6 күн бұрын

  I want to be like you one day.

• 
  @MangoJellySolutions4 күн бұрын

  Lol, no you don't, I'm so ugly I can curddle milk at 20 yards 😂. No serious, just keep building things, you will get there 😊

• 
  @DaveTimperley6 күн бұрын

  Is there a 'wind tunnel' type function in Freecad?

• 
  @AlanTuringWannabe6 күн бұрын

  Thank you for this. I understand shape binders now. It's a powerful feature.

• 
  @MangoJellySolutions4 күн бұрын

  Great to hear 😊 the offset on the green subshape binder comes in real handy. I use it all the time.

• 
  @josegegas6 күн бұрын

  Hi. Thanks for the tutorial. Just a comment. Not a good idea to use fem for 3d pronted parts. They often have mechanical properties different from those of the material they are printed of...

• 
  @thomasneemann56186 күн бұрын

  thank you, reset ist very helpful

• 
  @DaveTimperley6 күн бұрын

  Hiya, great vid 🙂 I'm not using FreeCad just yet so can't look it up, but in regards to 3d print mat. Is there parameters for Nylon and maybe Glass filled nylon? How would one dial in a mat that isn't in the list? Have you ever designed and tested 'compliant mechanisms' with Free Cad?

• 
  @garyl60317 күн бұрын

  Yaaa! Thank you. I'm loving it!

• 
  @MangoJellySolutions4 күн бұрын

  Enjoy! 😊😊😊

• 
  @christianmontagx84617 күн бұрын

  "Click there, copy that, click there, generate that...." No thanks. Nice tutorial for FreeCAD but I know now again why I changed to Fusion360 :)

• 
  @TheSillybits7 күн бұрын

  Maybe it’s handy to put link(s) to playlist(s) in the description(?)

• 
  @vladimirastrelin17197 күн бұрын

  Thanks, Darren. Looking forward to your next lessons!

• 
  @guillaumevincent7167 күн бұрын

  Awesome video mango jelly thx

• 
  @garyl60317 күн бұрын

  Are you going to do more? I finally found a tutorial that helps with learning freeCAD! Please Please don't stop now.

• 
  @MangoJellySolutions7 күн бұрын

  Yes this is going to be a whole course. It's a bit different to my previous learning freecad series which is still valid for this version of freecad. Glad your enjoying. BTW. next video is out today.

• 
  @BOTmaster158 күн бұрын

  Sometimes Part workbench at first might seem worse option but things like boolean operations works much better than in part design. Sometimes sadly further editing geometry can brake in both benches when importing stl and converting it to solid.

• 
  @nameismetatoo45918 күн бұрын

  One of the reasons FreeCAD isn't really free-it costs you your sanity. Don't get me wrong, I'm grateful for the hard work of the devs for making a powerful CAD program that's free to use. But man, does it have its flaws.

• 
  @CharlieVN8 күн бұрын

  would these concepts work on a scanned 3d model with complex shapes, like a mirrorless camera grip for instance?

• 
  @Todestelzer8 күн бұрын

  So complicated. But it’s free…

• 
  @patdesse66938 күн бұрын

  Merci !

• 
  @MangoJellySolutions8 күн бұрын

  Thank you 😊😊👍👍

• 
  @patdesse66938 күн бұрын

  Thanks a lot for this great video 😊

• 
  @MrDougDR9 күн бұрын

  The slider bar is not about increasing the load it just and only shows an exaggeration of the starting load load. I your chass 1 newton metter