Пікірлер

• 
  @TimothyBehler4 күн бұрын

  Worked perfectly. Thanks

• 
  @Crimson_Hawk_014 күн бұрын

  someone thinks they are Mr. cool with the knife.

• 
  @canyonero205011 күн бұрын

  Worst video ever

• 
  @tonymackey37015 күн бұрын

  Thank You

• 
  @NHSummits24 күн бұрын

  Thank you for posting this video. This was the exact content that I needed to replace the passenger side mirror on my 2017 Toyota tundra SR5 crew max the only difference being that there is no speaker that I had to worry about. Thanks again!!

• 
  @robertsandoval580825 күн бұрын

  Where did you order it

• 
  @chrischavez60427 күн бұрын

  Very helpful. Thanks.

• 
  @mglastra5151Ай бұрын

  Great video!

• 
  @ShawnTRDАй бұрын

  Are they still working good? Was that a delay in the start of the turning signal?

• 
  @simonsaysdie3155Ай бұрын

  Mechanic broke my tabs by closing the hood on a bottle cap from some fluids

• 
  @EUCmeАй бұрын

  Trev, I really want to polish a miror finish on an aluminum rim that has a lot of crevices. Can that be done? Thanks.

• 
  @TrevsGarageАй бұрын

  It can be done it will just take more time and attention to detail given all the crevices likely around the spokes I imagine. You may also want some smaller airway buff wheels to get into those tight spots.

• 
  @EUCmeАй бұрын

  @TrevsGarage Trev, thank you. I'll look into an assortment of polishing and sanding tools for this purpose. Again, thank you.

• 
  @harveyspecterdj6661Ай бұрын

  Thanks man. Just what I needed 🙂

• 
  @terryJacobs-jp9szАй бұрын

  Thanks. Will try your method. Great job.

• 
  @robertsandoval5808Ай бұрын

  Would this fix a 2021 Toyota tundra

• 
  @robertsandoval5808Ай бұрын

  Where did you order yours from . And what other options the it come with.

• 
  @Tibetan-PhosarАй бұрын

  Warning people- auto shutoff valve will stop working after the warranty. Phyn recommended that I buy another one for 20% discount. Fool me 2nd time, It's my fault.

• 
  @hikmatlb9357Ай бұрын

  Thanks for the video . I have a TRD sport 2020 i really want to have power folding mirrors, is plug and play or lots of work to do ? Thanks in advance

• 
  @mackpeteno2 ай бұрын

  Thanks for a helpful video.

• 
  @lynb40432 ай бұрын

  Ahh Thanks👍

• 
  @mrt53422 ай бұрын

  My initial thought on the broken tabs on the inside, is how and where (hand placement) the hood is closed. If pressure is put on the hood scoop/bulge when closing, that could be a factor. I baby mine when I close it. Haven't noticed this issue from the video, but haven't looked for it either.

• 
  @sharongrenier70812 ай бұрын

  Maybe next time, roll your window down....might be a bit easier. ;-)

• 
  @stevean772 ай бұрын

  Thanks Bro I'm touring production company I have one day before I'm out and needed to know how to do this to keep my gear dry haaaaa

• 
  @robertsandoval58082 ай бұрын

  Dose yours have the automatic. Open and close

• 
  @TrevsGarage2 ай бұрын

  Yes it does

• 
  @robertsandoval58082 ай бұрын

  Where did you order it ?

• 
  @TrevsGarage2 ай бұрын

  I got it from a dealer

• 
  @robertsandoval58082 ай бұрын

  Would this mirror fit a. 2021 tundra 1794 edition?

• 
  @justme-dm7sb2 ай бұрын

  Why do I think putting paper down first is a better option?

• 
  @bradleybond75052 ай бұрын

  How much did the mirror cost you? My local dealer wants 1162.20 but on line it says 765.26.

• 
  @TrevsGarage2 ай бұрын

  It’s been a while but I feel like it was around 800

• 
  @azclaimjumper2 ай бұрын

  New Subscriber & I rang the notification bell. How many amps did you choose for each of the fuses?

• 
  @TrevsGarage2 ай бұрын

  Thanks for the sub! I used the original fuse for the one then a believe a 2a for the dashcam

• 
  @azclaimjumper2 ай бұрын

  @@TrevsGarage I've just successfully hard-wired my Garmin 57 into the electrical system of my 2009 Toyota Yaris. I wired a red & yellow wire into the electrical system, as I want the Park Mode feature of my dashcam to videotape everything while I'm parked & the engine is turned OFF. I cut off the butt crimp connector at the end of both Fuse Tap Adapter & replaced it with Bullet quick connect/disconnect, I made certain to crimp the FEMALE Bullet Connector to the end of the Fuse Tap Adapter wire. If, for any reason, I decide to disconnect the hard-wiring kit, there won't be bare metal that could cause problems. The MALE Bullet connector I crimped onto the dashcam wires. I, personally, prefer Bullet quick connect/disconnect rather than spade. Also, the Bullet connectors I used are insulated & have heat shrink which makes for a clean, waterproof connection between wire & connector after being crimped. Warm Regards from Reno, Nevada

• 
  @matthewfirestine63033 ай бұрын

  USE THE SIDE OF AN OSCILLATING TOOL BLADE. Vibration will chip it apart quickly.

• 
  @amylikes9up3 ай бұрын

  Thank you so much. It works now!

• 
  @donnstambaugh15063 ай бұрын

  Thanks.,.

• 
  @donaldingram57653 ай бұрын

  Does this process work on stainless exhaust pipes?

• 
  @TrevsGarage3 ай бұрын

  Yes the same process will work!

• 
  @briannadean81583 ай бұрын

  Would you recommend rolling down the window - to be able to hold the mirror and tighten at least one bolt?

• 
  @TrevsGarage3 ай бұрын

  Yes, that is definitely a good idea so that you don’t drop anything!

• 
  @user-ff2tt6um7m4 ай бұрын

  Thanks for the simple fix.

• 
  @patrickpeterson67264 ай бұрын

  Holy crap! I know a contractor that would have loved to have known about this about 8 months ago. Shame he never learned to do any research. Thanks for the tip! That's F@#$! Awesome!

• 
  @avaldez37424 ай бұрын

  "promo sm"

• 
  @RodSanders-hf9el4 ай бұрын

  1245(3/1/24) What is the name of the red line adapter that fools your truck and the thank you are not pulling a trailer?

• 
  @stevewhisperer66094 ай бұрын

  Good little video. 👍 My 2016 has this issue as well. You'd think either having metal tabs on these ( or even the entire piece) made of metal would be the way to go. Granted, it would be more expensive.. but one and done would be cheaper than two, three, or more plastic replacements.

• 
  @TrevsGarage2 ай бұрын

  Agreed, I had to replace again after this video and used fiberglass and epoxy to try and prevent it from breaking again has held up so far

• 
  @stevewhisperer66092 ай бұрын

  @@TrevsGarage I ended up ordering a replacement on amazon for about $89.00. Looks great, so I'll see how long this one holds up.

• 
  @olivarezbling4 ай бұрын

  Awesome thank you 🙏🏽 🙏🏽🙏🏽🙏🏽 can please do a video of the fog lights removal there’s no videos on KZread on how replace them for. 2018 “ not the round fog lights “ the ovals please or tag me if you find one please 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

• 
  @TrevsGarage2 ай бұрын

  I will keep an eye out for one sadly I do not have the truck anymore

• 
  @whereisjeena4 ай бұрын

  Where did you screw (beginning here)

• 
  @seandeyoung015 ай бұрын

  Did you secure the backing to anything or just using the screws to keep it in place?

• 
  @TrevsGarage2 ай бұрын

  Just screws to the wood block and it is wedged next to the support in the trailer

• 
  @toroidryan5 ай бұрын

  What is the box looking redline adapter that is connecting the 4pins? I can’t find it online?

• 
  @TrevsGarage2 ай бұрын

  Redline no longer says that’s needed so you likely will not find it

• 
  @livingadreamlife14285 ай бұрын

  It’s called a Hood Bulge, not a Hood Scoop.

• 
  @AgentBravoM5 ай бұрын

  The redline module is no longer available on Amazon or opt7 website. Is it necessary to have on a 2018 Tundra?

• 
  @TrevsGarage5 ай бұрын

  Thanks for pointing this out to me I will look into why it has disappeared. It's not needed on the Tundra.

• 
  @BlueLineHarleybyMiltonFig5 ай бұрын

  Fantastic video. Great job

• 
  @luisibarra81975 ай бұрын

  Great video! Thank you. If a put the mirror of a 2018 to a 2021, will be ok or the second sensor will read the is missing and will give me a error read in the computer? Thank you.

• 
  @neilwootton26916 ай бұрын

  Ive got a Dewalt DCG 418. COuld i achieve the same results with that single tool just with the relevant style discs?

• 
  @TrevsGarage5 ай бұрын

  Looked up that Dewalt model looks like it is an angle grinder. I think you may have trouble when using the sandpaper at those higher RPM's. I'd recommend trying a small test spot first. Best of luck!

• 
  @Janmove6 ай бұрын

  Very nice and well explained 👏 💪👍

• 
  @kayperkayful6 ай бұрын

  Looks easy enough…thanks!

• 
  @ElChupa_Cabra6 ай бұрын

  Nice supercharger