How To Install LED Lights On a Back Rack [4K]
Автокөліктер мен көлік құралдары
This is a quick run through of how we installed two LED Lights on the Back Rack in this 2015 Ford F150. The install was fairly simple we first marked out holes to drill for the mounting location on the back rack. We then measured lengths of wire that would pop out under the bed, and another length to run down the frame rail and up to the battery. We used a wireless switch from Oracle model 5772-504. This allowed us to not have to get wires through the firewall and into the cab. The switch has several modes besides steady on that can be changed easily with the included key fob to turn on the lights.
Lights
2X 7” 1000W Cree LED Work Light Bar Spot Flood Combo Beam Reverse Driving Lamp
rover.ebay.com/rover/0/0/0?mp...
Switch
Oracle Lighting 5772-504 Remote Wireless Light Switch
amzn.to/3me6z3q
Milwaukee M12 Soldering Iron
amzn.to/2ZrpW0q
Wire
14/2 AWG Duplex Flat DC Marine Wire - Tinned Copper Boat Cable -50 Feet - White PV
amzn.to/3vKpbeq
Dielectric Grease
3M 08946 Clear Silicone Paste
amzn.to/3BbWb0p
Heat Shrink
WindyNation 100 Feet (31 Meters) 3/8 inch, 3/8" I.D. Polyolefin 2:1 Black Heat Shrink Tubing
amzn.to/3BgEiO2
WindyNation 100 Feet (31 Meters) 3/16 inch, 3/16" I.D. Polyolefin 2:1 Black Heat Shrink Tubing
amzn.to/3vML5h0
WindyNation 100 Feet (31 Meters) 1/8 inch, 1/8" I.D. Polyolefin 2:1 Black Heat Shrink Tubing
amzn.to/3ChvMj7
650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material
amzn.to/3GsI8Ye
UNDER NO CIRCUMSTANCES WILL TREV'S GARAGE BE RESPONSIBLE OR LIABLE IN ANY WAY FOR ANY CONTENT, INCLUDING BUT NOT LIMITED TO, ANY ERRORS OR OMISSIONS IN THE CONTENT, OR FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF ANY CONTENT COMMUNICATED ON THIS KZread PAGE, WHETHER BY TREV'S GARAGE OR A THIRD-PARTY. IN NO EVENT SHALL TREV'S GARAGE BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS ARISING OUT OF OR IN CONNECTION WITH THE AVAILABILITY, USE OR PERFORMANCE OF ANY INFORMATION COMMUNICATED ON THIS KZread PAGE.
Пікірлер: 24
Another clean install by Trevs Garage!
Nice work!
Nice!! I’m heading to my mechanic and showing them this! Thanks hoss!
@metal1301 I am not sure what happened to your comment but I did read it. Thank you for the plethora of information you included. I actually came to realize on my own using the dielectric grease with heat shrink was not working and had since stopped using that, someone had taught me that. The different styles of splicing the wires together was definitely interesting and I looked into all of them and will definitely be using for the future. I am at still happy with the work i did here because many people opt to just use quick crimp connectors which I don't believe in at all. I did and always use an inline fuse on all of my wiring projects, must have forgotten to include that in the video. And for sure those Milwaukee lights are killer I keep one in my own truck at all times great for an emergency and very impressive run time on them.
Nice video thanks for sharing!
Good video thanks!
Those rims are very nice
Very nice and detailed step by step video. Is there anything that you would recommend to add to this build, as a safety or anti theft protection? I’d love to get lights on the rack but am paranoid about the lights getting stolen, especially if I have to park out on the street.
THATS FUCKING SWEET!!!!
Do you know what diameter the holes are with the grommets?
How did you splice both light in to one main wire?I assume you did power to power ground to ground from light to light then add a third wires to run to the battery for power and ground?
@TrevsGarage
Жыл бұрын
Yeah thats correct!
With that remote can you control more then 2 lights separately ? I have a back rack on my truck and I want a 12" light bar facing forward and 2 , 4" cubes facing towards the rear but i would want the front controlled separately from the rear facing lights is that possible with the 1 remote ?
@TrevsGarage
4 жыл бұрын
You unfortunately can not control them separately from that switch it is just one main on off, the other buttons are to control the flash pattern. I am actually currently working to develop a product that will have the ability to wirelessly power any number of accessories from 1-8 if it works out I will let you know.
@jadoiron
Жыл бұрын
@@TrevsGarageany product yet for multiple lights / switches?
@TrevsGarage
11 ай бұрын
I could track something down for you? Does it need to be wireless or hardwired is okay for the controller
I am wanting to purchase a Back Rack and install a set of LED light pods. Can I use that same wiring harness that you use? I also thought about wiring them into one of my upfitter switches but I am not sure how to do that. Can you give me some insight on how to do that?
@TrevsGarage
3 жыл бұрын
You could use the harness I used or the upfitter switches. What truck / year do you have?
@guyshock2498
3 жыл бұрын
@@TrevsGarage I have a 2016 Ford F250 Super Duty. It has the 4 upfitter switches. If I use an upfitter switch, how would I wire the lights into the switch? Your help would be greatly appreciated. Thanks.
What lights are those and how did you make them strobe
@TrevsGarage
3 жыл бұрын
The lights we just a set of led lights off of ebay and they strobe due to the wireless switch module we used. Both links are in the description.
Where did you buy the remote control ?
@TrevsGarage
Жыл бұрын
Links should be in the video description! Let me know if you cant find it
Nice explaining after everything it’s already wired lol incomplete as video