The spade connectors you removed at the beginning. Do they go over two connectors or just one? I have taken mine apart to replace and not sure how to get it back again.

Do you need to have a ground wire for caravan for led lights? Or can you just connect it to the caravan as a ground per non led lights?

fitted these to my trailer board today they don't work on the car. but an led trailer board I bought later today worked fine. Did you fit resistors in line and did you test on the vehicle to see if it works?

You DO need to keep the triangle reflectors as these indicate it is a trailer. The square built in reflectors are for when the lights are used on a vehicle.

@eresbyjack

6 жыл бұрын

I use red triangle at the rear and the square orange reflectors on the sides of the trailer

@Harley04

5 жыл бұрын

Which country mate? never seen them in Australia

is that connection water proof? thinking of boat trailer that will get submersed in water when launching. thanks

not quite lifetime warranty! i contacted them about a spotlight that was letting in water and turning the reflector black and i was told to go back to the distributer..........bit hard when they are defunct.

not very good u don’t show what wires join to where

What about the Number plate lights ? I don't see them

Im from India how can I buy this 1

Thanks that's observed good information idea video channel I love this post to learn more

number plate light?

it would have been more helpful had you shown the (2) taillights connections to the trailer or rv connector: but thank you anyway,PATRICK.P

Could I put powerful led lights in place of the factory light bulbs? ( Back up lights only) Just to have a little better illumination. Also, some people tell me that you can't mix led with regular bulbs and that they must all be led in the system.

@Truckelectrics

7 жыл бұрын

Hi Ned, Do you mean led reversing lights? www.truckelectrics.com/collections/work-lights/products/led-reversing-light-48w

@nedcramdon1306

7 жыл бұрын

Yes. We call them back up lights or reverse lights.I thought maybe I could put led bulbs in place of the regular sockets in my vehicle ..

@Truckelectrics

7 жыл бұрын

Here is a link to led bulbs , you mean these? www.truckelectrics.com/products/24v-premium-led-single-contact-tail-light-bulbs-replaces-149-248-pack-of-2

@nedcramdon1306

7 жыл бұрын

TruckElectrics.Com You guys run 24V ? Here (N.S) vehicles use 12 VDC .Thanks for responding though. P.S. I don't know why ford doesn't use brighter reverse bulbs.

@znovosad555

6 жыл бұрын

You can use conventional bulbs with LED. The LED will just draw less. A lot of us here in the states switch just about everything to LED

LED lights dont have a green wire for the right turn signal....what do you do??

@ralph9987

4 жыл бұрын

lol

hi do you have a link for the led lights in your video please, great job by the way

@dawslammernz

5 жыл бұрын

found them cheers

@groupstarcnb727

5 жыл бұрын

maybe our link will be give you surprise. www.china-groupstar.com

Plz 9 inch tailamp demo sir plz

Instead of the lighter, why not use the side of the soldering iron..

A good instructional video. Why spoil it with the idiotic muzac in the background? AB

@geemann388

4 жыл бұрын

when you're a newbie they like you too play the video 10 times so you can try and distinguish what they are saying.

Pity we did not see How To Wire Up Led Trailer Lights

@Harley04

5 жыл бұрын

Yeah, I have virtually the same lights off eBay but no plug, all wires are separate, which brings me here!

' better add 3 lights on the trailer taillights.... 1- red ;light is a STOP 1- amber light is a turning left or right or energemcy flasher 1- white is a back up as reverse

I'm changing my trailer lights over to LED as soon as possible, my electrical's probably won't know the trailer is even there if I do

Excellent instructions. The music is too busy and too loud. Just saying.

Illegal removing the triangle reflectors and why did he not fit lights over the old light holes. Only wired the easy side as you after sort out the wiring as these lights are colour coded for one side only.

@Truckelectrics

7 жыл бұрын

Hi John, We drilled new holes because the old holes wouldn't fit, also we wanted to make the video as clear and simple for our viewers..not confusing them with existing holes etc. Only wired the easy side.. dont know what youre getting at there.. And finally, Yes we should have left the warning triangles on, Our mistake, Point taken!

@545iAR

7 жыл бұрын

TruckElectrics.Com He said easy side because the colours shown for that light you fitted match the existing loom colours in that side. The other side uses a green wire for the indicator and a black wire for the side light. Standard 7 core trailer wire has different coloured wire for each indicator and each side light. Common wires, red for brake, blue for fog and white for earth, all the others are unique, a point you don't mention in your video or comments.

Law states a trailer must have triangular reflectors

@cili7

5 жыл бұрын

In which country? I'm curious because In Australia you don't.

@blackmagicmk2

5 жыл бұрын

@@cili7 Ireland and uk

@Harley04

5 жыл бұрын

@@cili7 People forget they are not the center of the universe!

Playing stupid music over the commentary should be illegal too

h

Rewired my whole trailer with a new kit. Plug in. Doesn't work. Edit: welp. It does work but only when the ground is connected back to the wire and somehow the signals are on the wrong sides. GJ me.

DThe

Need to explain what color wire goes where when wires are different colors. Poor video

Forgot these led lights have no licence plate illumination again illegal.

@Truckelectrics

7 жыл бұрын

Hi John, You can add LED Number plate lights separately, These lamps are not illegal.. www.truckelectrics.com/collections/number-plate-lights