Пікірлер

• 
  @aljolson66133 күн бұрын

  It's got plastic part's that are broken, at least my one has . Dont buy parkside rubbish

• 
  @markyboy41610 күн бұрын

  Just bought one and searching for a quick demo video, this was spot on!! thanks!!

• 
  @Beetlestone-carlАй бұрын

  How is best to cut high skirting board on this saw thanks

• 
  @TheCustomCarpenterАй бұрын

  Hi, Best way would be to lay it flat and slide it over to 45 for corners. If the skirting isn’t too tall then you may be able to stand it up and use the sliding bevel for cuts.

• 
  @Beetlestone-carlАй бұрын

  @@TheCustomCarpenter if you still have the saw could you possibly do a video showing how it’s done and how to make sure the blade is square for the cuts thanks I’ve got a kitchen job to do and want to make sure it’s cut right

• 
  @Shad1965Ай бұрын

  Great video mate.. i may get one of these now

• 
  @TheCustomCarpenterАй бұрын

  Thank you, go for it! defo worth the money and perfect for the smaller jobs, looking to upgrade to a trim router, for ease of use and to free up a hand as this needs two to operate.

• 
  @PapaJoeWalshАй бұрын

  Great video! I am struggling to decide whether to buy one for my small workshop and this has really helped; at least I know what I'm dealing with now. Simple, no frills review - perfect! Someone suggested another video with the improvements you made to it; maybe you did this so I'll have a look at your other videos.

• 
  @trevorlewis27583 ай бұрын

  GREAT VIDEO, THANKS

• 
  @TheCustomCarpenterАй бұрын

  Glad you enjoyed it

• 
  @dianavideomarketing4 ай бұрын

  Anyone managed to get spares for this router? I need a new collet nut, but none of the ones I’ve tried fit. Thanks

• 
  @TheCustomCarpenterАй бұрын

  Try your local hardware store, or mechanics. They may have some spare.

• 
  @lewissmith14304 ай бұрын

  Thanks for this mate! Very clear 👌 looking forward to seeing more videos

• 
  @TheCustomCarpenterАй бұрын

  Glad it helped

• 
  @nasreenshamsi9906 ай бұрын

  Where is the start button?

• 
  @TheCustomCarpenterАй бұрын

  On the handle. Need to press two buttons to start it.

• 
  @Jizzlewobbwtfcus7 ай бұрын

  Just bought one today and it looks like they changed a lot of the molding of some parts. Bloody instruction manual is different too and rather annoying but thx for the demo mate

• 
  @TheCustomCarpenterАй бұрын

  Thank you, glad you enjoyed the video.

• 
  @leonardnoel8888 ай бұрын

  I am very curious if you did some "minor upgrades" to enhance safety of operations on this machine? Thank you.

• 
  @leonardnoel8888 ай бұрын

  Very good presentation. I would also suggest that you add and demonstrate pre adjustment and/or pre-calibration prior to use: 1) How to check and set the table top to be flat. 2) How to check and set the blade is parallel to the Mitre slot. 3) How to check the fence is parallel to the blade. 4) How to check the blade actually at 90 degrees to the top once it is in 90 degree position. Recommend all those to be pre-checked / calibrate to make any cuts accurate. That is very important, but better design may be required as current looks a floppy. Otherwise great presentation. Thank you.

• 
  @reoreborn12098 ай бұрын

  Tyvm for this review! Has really helped making my choice. New sub!

• 
  @TheCustomCarpenterАй бұрын

  Thank you, I use it most days and makes light work of tough spots that need sanding.

• 
  @martincraven14118 ай бұрын

  Excellent review. I'm off to buy one today. Thank-you

• 
  @TheCustomCarpenterАй бұрын

  You’re most welcome. Glad you enjoyed the video.

• 
  @ethanevans88698 ай бұрын

  Does it have a depth stop?

• 
  @TheCustomCarpenterАй бұрын

  Unfortunately not.

• 
  @nunofilipe20719 ай бұрын

  Good review best Regards Nuno Portugal

• 
  @TheCustomCarpenterАй бұрын

  Thanks Nuno, glad you enjoyed the video and all is well in Portugal.

• 
  @wrightbytes11 ай бұрын

  I've just purchased this router off someone. I am a total noob to using routers so it's going to be a learning curve for me. Thanks for doing this video.

• 
  @TheCustomCarpenterАй бұрын

  You’re most welcome, hope you’re getting some good use out of it.

• 
  @seanhiggins9727 Жыл бұрын

  WhatT is the depth of the seating

• 
  @TheCustomCarpenterАй бұрын

  It was 450 - 500mm. Based it off an average of a handful of dining chairs.

• 
  @kyriacosgeorgiou6935 Жыл бұрын

  hello minas are you Cypriot? i have a question can you use dado blades on it?

• 
  @TheCustomCarpenterАй бұрын

  Hi Kyriacos, no I’m Pakistani. No, can’t use Dado blades. I believe they are not eligible to be used in the UK, apparently they’re not safe for us to use.

• 
  @kyriacosgeorgiou693529 күн бұрын

  @@TheCustomCarpenter thanks. i got it and used it cutting wood .my one the table was not straight had to cut angle irons and screw them under the table to make it straight.

• 
  @hadzicana1 Жыл бұрын

  platiti 210 eura moze samo onaj ko ima cardak u glavi

• 
  @theredcabin Жыл бұрын

  HELP! I have this sander and the dust bag does not stay on. What am I missing? It blows off in seconds after starting sanding. I've twisted it, turned it, taped it on. Am I missing a part ?! Love the sander, hate the bag. When it's on, it collects dust very well. Just does not stay on.

• 
  @TheCustomCarpenterАй бұрын

  That’s odd, mine just clips and twists on. I do not duct tape it on mostly because I just throw it in the van and the bag has come away from the plastic screw that attaches it to the sander. My fault not a fault with the sander.

• 
  @dianaangeles9866 Жыл бұрын

  I want to build a bench but instead of an angle I want a rounded corner; do you have a video for that?

• 
  @robertomguimaraes Жыл бұрын

  What do you can say about durability after 2 years? Thx

• 
  @TheCustomCarpenterАй бұрын

  Coming up to nearly three years now, works like new. Can’t fault it.

• 
  @ghnabikhan9309 Жыл бұрын

  Jks wali mujhe uski jankari chahie order kaise ho sakta

• 
  @Jill-K Жыл бұрын

  Thanks

• 
  @radoslawkotowicz46 Жыл бұрын

  i got one, but pad doesn't rotate.... is it broke or i got different model?

• 
  @theredcabin Жыл бұрын

  It's not supposed to spin. That's why its a random orbit sander.

• 
  @TheCustomCarpenterАй бұрын

  Hi, it doesn’t spin constantly more of a random orbital action.

• 
  @stevenkang9270 Жыл бұрын

  challenging to hear you loud and clear..For your next project, please wear mic on shirts and hope we may enjoy yours..Thanks

• 
  @TheCustomCarpenterАй бұрын

  Thank you, will do.

• 
  @ghnabikhan9309 Жыл бұрын

  Sir please mujhe aapka number chahie mujhe Bosch cutter jacket iski mangani hai ki

• 
  @ghnabikhan9309 Жыл бұрын

  Aapka link chahie mujhe yah Boss

• 
  @heatherdoyle1243 Жыл бұрын

  Love ❤

• 
  @tomjdesigns1280 Жыл бұрын

  Blade stop is very slow

• 
  @LuisDiuk Жыл бұрын

  You got it for 50 pounds, they sell it now for 75 pounds

• 
  @geeman52943 ай бұрын

  B and q £50

• 
  @TheCustomCarpenterАй бұрын

  Yes I’ve noticed the price increase over the last couple years. Maybe due to it being good for what it was originally priced at. Demand has no doubt pushed the price up.

• 
  @vanlifenomad Жыл бұрын

  Great review, I've just picked one up for my camper van work

• 
  @reoreborn12092 ай бұрын

  Hope you don't mind me asking but how did you find it?

• 
  @vanlifenomad2 ай бұрын

  @@reoreborn1209 Great for the money no issues

• 
  @reoreborn12092 ай бұрын

  @@vanlifenomad thanks matey! I'm a bit worried about the low price but all the review SIM seeing are positive

• 
  @TheCustomCarpenterАй бұрын

  Thank you, I use it at least twice a week and still can’t fault it. Would only upgrade to a palm router just to free up a hand.

• 
  @augustinemitchell53 Жыл бұрын

  I bought one and I'm here to be learnt how it works...thanks pops!

• 
  @TheCustomCarpenterАй бұрын

  You’re most welcome. Thank you

• 
  @paularnold4440 Жыл бұрын

  Really useful video. Thanks. Just wondered how deep can the machine cut? Cheers Paul

• 
  @arkotk Жыл бұрын

  Perform protect. Dunno what that is... Ehm, this is a review. You did not like the B&D coz your hands got numb while using it. Dewalt Perform Protect prefends your hands to get numb.

• 
  @TheCustomCarpenterАй бұрын

  Hi, Thanks for your comment. Can definitely say fingers still get numb after prolonged use.

• 
  @joshryan1159 Жыл бұрын

  are you able to set the depth of a cut on this saw, just bought it and cant seem to find out how if there is

• 
  @TheCustomCarpenterАй бұрын

  Hi, no depth stop unfortunately

• 
  @cclow9494 Жыл бұрын

  Good informative review. The DWS774 permits clamping on right hand side as well as left hand side. I presume the DWS773 model has the same base so right hand clamping should be possible. Right hand clsmping is useful on bevel cuts as the clamp fouls the saw when tilting the saw to the left. Also note that clamping the workpiece to the handle has a tendency to uplift the workpiece so best clamping down to the solid metal base and not the handle.

• 
  @vincentsalva8163 Жыл бұрын

  Do you think you could attach a vacuum to it?

• 
  @TheCustomCarpenterАй бұрын

  Of course, I have a small shop vac, have to duct tape it though as the vac doesn’t have the correct attachment.

• 
  @joeharrison5746 Жыл бұрын

  Seriously... Keep your left hand OFF the wood when cutting! (Thats why its fitted with clamps)

• 
  @Hans_Cattini Жыл бұрын

  I noticed you used a driver to put the screws in for the added fence , which driver would recommend please ..

• 
  @Hans_Cattini Жыл бұрын

  Nice setup, nice box you made too........ , so envious , nice work , i did learn one or two things , so maybe i will buy one , for the price you can't go wrong ...

• 
  @jobandknock427 Жыл бұрын

  For your own safety please always push the router away from you, don't draw it towards you as you did at about 7:00 - unless you fancy having a pattern routed up your chest. Also your fence positioning is wrong - the golden rule is material to the left, cutter to the right of it, fence (if any) to the right of the cutter and always push the tool away from your body Happy and safe routing!

• 
  @supermario1982171 Жыл бұрын

  How has this lasted not sure of getting this one or the nakita one

• 
  @wolfiesmith7674 Жыл бұрын

  After years of buying cheap (disposable) sanders this dewalt is a pleasure to use. Easily stripped internal doors with several years of paint back to bare wood with cheap Aldi discs. Just wish the button was a bit bigger. Glad to see it fits in a tstak as they can be bought cheaply second hand.

• 
  @Douglas-hw8is Жыл бұрын

  LoL - I was waiting for you to cut the cable !

• 
  @nigelwest3430 Жыл бұрын

  Very entertaining, I like the slightly chaotic presentation style, Feels natural 🙂

• 
  @pawejozwik9363 Жыл бұрын

  Wszystko fajnie ,ale te zabezpieczenia,maska okulary,to chyba przesada,co ubierasz jak wbijasz gwoździe 😂

• 
  @RoryAherne Жыл бұрын

  These are the good videos. No influencer bollox, clickbait, unboxing, reaction. Like KZread in the old days. Thanks chief

• 
  @tegwyndixon7447 Жыл бұрын

  Disappointed thought you was going to show assembly.