Пікірлер

• 
  @jalmonte2258 күн бұрын

  Did you get a clunk noise with these power stop pads?

• 
  @jayheritageclub78528 күн бұрын

  @@jalmonte225 no noise from them and no dust

• 
  @daxkindle51548 күн бұрын

  I have a 2012 CLS550 and I'm having the same issue but can't find the parts, where did you get your parts from?

• 
  @jayheritageclub78528 күн бұрын

  @@daxkindle5154 got the parts from fcpeuro , all part numbers in video .

• 
  @eagleeagle68117 күн бұрын

  Was the bearing worn? I have humming noise and changed front differential wheel bearing

• 
  @eagleeagle68117 күн бұрын

  Noise still there

• 
  @jayheritageclub785215 күн бұрын

  @@eagleeagle681 No the bearing was fine I was chasing a weird noise from driver side , but the shaft was showing where on the teeth in the front diff and the CV axle special

• 
  @eagleeagle68115 күн бұрын

  @jayheritageclub7852 What was causing the noise

• 
  @jayheritageclub785212 күн бұрын

  @@eagleeagle681 shaft and shaft bearing are maintainers items, and the noise it was the shock top mount.

• 
  @HenryLoYu26 күн бұрын

  Did you fix that low speed noise? My 212 having the same mild roaring and slightly vibration at on 49-50 km/h.

• 
  @jayheritageclub785212 күн бұрын

  @@HenryLoYu yes I did, but each application is different is good to do some testing before you do the bearing.

• 
  @ericksanchez940726 күн бұрын

  What if I can’t find the green wires on my connection that goes to the big box but I can find them on the canbus decoder?

• 
  @Jamescallaghan-bq7fgАй бұрын

  Guys, I have followed the instructions and wired the speaker cable to the existing car can bus, the new car can bus and the fibre optic converter but still cannot get stereo sound, absolutely nothing. Can any help with advise?

• 
  @jayheritageclub7852Ай бұрын

  Can you use steering controls ? If not you may miss the step of car communication with the radio

• 
  @Jamescallaghan-bq7fgАй бұрын

  @@jayheritageclub7852 no I can’t use steering controls. Thank you for replying, I really appreciate that. I will watch the video again and see if I can get it right the 2nd time around.

• 
  @robertorosete7780Ай бұрын

  Where can I buy that Fiber optic Decoder with CAN wires ?

• 
  @jayheritageclub7852Ай бұрын

  I got my from eBay

• 
  @gabi20kingАй бұрын

  Hey man, thanks for the video! Keep it up 😎👌👏

• 
  @jaurvoisiermerritt1293Ай бұрын

  You saved me $300 and educated me at the same time! You da man bro! 💪🏾🤜🏾🤛🏾

• 
  @user-eg9tf1zx4wАй бұрын

  Schlecht video

• 
  @mohammedsaniadams1197Ай бұрын

  Thank you so much for the inlightmen my challenge is I try to connect my aftermarket android system but finding it difficult the green and black connector

• 
  @6ohpowertower6122 ай бұрын

  Thank u for a detailed video. Suler helpful. I am doing my stereo on 2008 cls and for some reason headunit does not power on. They only wire that i havent connected is wire from canbus box to cars can system. Also my decoder does not have 2 green wires. Only red wire labeled ACC. Do you think cars CAN system has to be connected ir order for unit to power on? Thank you for your time if you get a chance to answer.

• 
  @jayheritageclub78522 ай бұрын

  Hey, go over the wiring probably something is loose or maybe a fuse the new Canvas style do not have the green wires It will be only red black, yellow and the RCA

• 
  @6ohpowertower6122 ай бұрын

  @@jayheritageclub7852 so leave the red wire ACC alone on decoder? Also do i have to get loop wire for fiber optic for cd changer?

• 
  @jeffbohn25762 ай бұрын

  I just bought a 2015 CLS 63S It had 53,000 miles.. I'll be watching your channel for all my future troubles

• 
  @user-dw9ii1vw2g2 ай бұрын

  Mine check engine light came on , I went to AutoZone and they pointed out that camshaft sensor is bad I took all of them 3 were leaking, thanks for the video

• 
  @jayheritageclub78522 ай бұрын

  Thank you I’m glad it helped you , If you liking for parts check fcpeuo , autohausaz , rock auto .

• 
  @multiblade042 ай бұрын

  @@jayheritageclub7852how can you check if your camshaft magents are bad or leaking? Or should you just replace them as maintenance every once in a while? Mine has 90k miles.

• 
  @jayheritageclub78522 ай бұрын

  @@multiblade04 just take the connector off and look for oil on connector or in magnet plug

• 
  @multiblade042 ай бұрын

  @@jayheritageclub7852while its off and if clean of oil should i go ahead and replace it anyways cause cheap part or if it is clean of oil just reinstall the old part?

• 
  @jayheritageclub78522 ай бұрын

  @@multiblade04 if replacing preferably to use the factory part I didn’t see other problems with them besides the oil so I would just keep them, you can get wire extensions it will help to keep the oil from getting to main harness.

• 
  @gabi20king2 ай бұрын

  Great video, thank you 🙏

• 
  @sydneyosisioma2 ай бұрын

  Great finding. It’ll be nice to show step by step on how you got to remove the parts. I know it’s not as easy as it appears. I’ll love to do this on my CLS 63 as well.

• 
  @sydneyosisioma2 ай бұрын

  Great job man. What made you change the axel?

• 
  @jayheritageclub78522 ай бұрын

  Boot is starting to develop small cracks and slight clunky noise

• 
  @peteymullice19522 ай бұрын

  'Promosm'

• 
  @kireaim90612 ай бұрын

  Well done

• 
  @Sunmit_productions_official2 ай бұрын

  any drone？

• 
  @jayheritageclub78522 ай бұрын

  On idle it’s sounds not clean but more fluffy/drone , X pipe after the cuts will get better flow and cleaner sound on idle if you do H pipe better to place it in middle for nicer sound

• 
  @robertehlers43302 ай бұрын

  I have w211 04 e320 is itabout same process 4matic.. love channel

• 
  @robertehlers43302 ай бұрын

  Get to it already Jesus Christmas

• 
  @jayheritageclub78522 ай бұрын

  Not sure what you’re meant ?

• 
  @gabi20king2 ай бұрын

  Hey it’s finely nice to see the man behind the scenes 👌👏👏

• 
  @CarCrazyRDM3 ай бұрын

  I did the same on my E63 wagon but then had to go back and add in an H-pipe, like was inside the resonator, because without a crossover of some kind the exhaust pulses can't equalize and it made the exhaust (and car) shake too much for my liking. It made it feel like it had a misfire at idle. The H didn't really change the sound that much but an added benefit is it did get rid of some of the "fluttery" sound at idle. Either way, the exhaust sounds much better w/o the resonator.

• 
  @jayheritageclub78522 ай бұрын

  Hey, yes X or H will be the correct way to do it for better flow, I just like that fluffy/drone sounding on idle sound

• 
  @Aslak19793 ай бұрын

  Great video, but what is the exact name of the Optical Fiber Decoder Most Box for the car? Yours has 1 green and 1 black-green wire but all I can find almost everywhere have a black and a yellow and two jacks. Where did you get yours exactly?

• 
  @jayheritageclub78523 ай бұрын

  You are correct the new ones don’t have the green wires for the signal they build in , so you should be fine with the new models just check that is for your exact model.

• 
  @Aslak19793 ай бұрын

  @@jayheritageclub7852 thanx so much! I'll give it a go then. 👍

• 
  @OGYELLOW3 ай бұрын

  Excellent thanks bro. I have a vibrations no noise and changed wheels tires, inner and outer tie rods torque arm sway links ball joints and still there. Gonna check my bearing

• 
  @andrehafrian4083 ай бұрын

  So you didn’t use the Powerbuilt tool right? Instead you use the Amazon brand ones correct

• 
  @jayheritageclub78523 ай бұрын

  Yes I got Amazon brand set for it, doesn’t have any name on it but I was looking for one that has different caps and would work with impact as well.

• 
  @forza386003 ай бұрын

  Many thanks bro I didn't know how to connect the fiber box on my harman kardon w203, I imagine that the assembly is identical? thanks again 👏🏻👏🏻

• 
  @nova_squad_bossx18183 ай бұрын

  Looking on doing this today

• 
  @jayheritageclub78523 ай бұрын

  You can try, but I didn’t like it how my temperature was rising up I know that oil will cook all seals O rings, and specially the turbos that ceramic bearing in there will go out quick I’m using ceratec in every oil change, and if I wanna have more optimized operation of oil pump, I just keep it in sport most of the time

• 
  @gabi20king3 ай бұрын

  Great video as always !

• 
  @kireaim90613 ай бұрын

  Yeh,wonderful car

• 
  @thespeedoffreedom6014 ай бұрын

  Great tutorial, brother. Should've added a before and after photo of the car lowered

• 
  @jayheritageclub78524 ай бұрын

  Thank you so much really appreciate your support before and after will be in part 2

• 
  @jorden47644 ай бұрын

  Great video man. I was having trouble with the rotors.

• 
  @bradpanganiban78384 ай бұрын

  Will the unit power on without a canbus connection?

• 
  @aryanr16814 ай бұрын

  Thank you so much for this video! Best I have seen so far I am currently working on this. I have power and no sound, connected all the wires EXACTLY how you showed. For the canbus under the dash, it caused the instrument cluster to malfunction (not work at all and gave the oil icon on the center screen saying display malfunction). Where did I go wrong?

• 
  @jayheritageclub78524 ай бұрын

  Disconnect all , but somethings definitely not right double check everything

• 
  @1jordanmiladinov4 ай бұрын

  i have mine wired for power the same way but the audio gateway doesnt go to sleep. battery drains overnight. what do i do

• 
  @ahmedhamidullah34865 ай бұрын

  I have 80k miles on my 2014, would you recommend me looking at them? What do I need to look for?

• 
  @jayheritageclub78525 ай бұрын

  Just follow the steps in video should be very easy job

• 
  @trionic55 ай бұрын

  How DIY friendly are these cars? Really considering picking one of these up but it would be nice not to pay Mercedes dealer level maintenance cost.

• 
  @jayheritageclub78525 ай бұрын

  They are DIY, friendly, but parts prices definitely not

• 
  @trionic55 ай бұрын

  @@jayheritageclub7852 definitely expecting the high parts prices, but it’s nice to hear that you can wrench on these relatively easily.

• 
  @user-fl9mx4sl4n5 ай бұрын

  Название на русском а говорит по Английский

• 
  @kaloyantattoo5 ай бұрын

  Not the same quality of sond like the original head unit

• 
  @bhandari10076 ай бұрын

  where we can buy this front side thanks

• 
  @mvsa9186 ай бұрын

  what is the seal called?

• 
  @jasonkhan466 ай бұрын

  Wich one was the attene the yellow or the purple

• 
  @samsunggurgenidze21356 ай бұрын

  Useful information: Where can I find these connection adapters? Can you send the connection diagram, thank you

• 
  @jayheritageclub78526 ай бұрын

  Hello, usually the diagram will come with units or on it as sticker, for adapters I purchased my from EBay .

• 
  @samsunggurgenidze21356 ай бұрын

  @@jayheritageclub7852 Thank you, another friend of mine gave it to me, but I don't have the adapter and plugs. Is there a store that sells it? It would be more useful if it was in the form of a diagram drawn on paper. Thank you

• 
  @jayheritageclub78526 ай бұрын

  @@samsunggurgenidze2135 can you send pictures of the unit

• 
  @samsunggurgenidze21356 ай бұрын

  Hello, I have a 220E, where can I get the connection diagram and connection adapters?

• 
  @randymcintosh91217 ай бұрын

  A whole bunch of nonsense.

• 
  @bigboicreme7 ай бұрын

  Where does the knock sensor plug in at? I replaced the camshaft ones but I think oil is in the knock sensor now, too much was in the harness. I have a knock sensor problem now and want to try cleaning the connector

• 
  @juanmendoza-fr1uz7 ай бұрын

  Thank man I’ve been looking for a video on how to remove the shifter

• 
  @nicogarceron7 ай бұрын

  Hi, great video! I have an 2005 SLK 350 with Harman Kardon. It has optic fiber. I followed all steps (haven't connected the green cable to the canbus yet), but I'm not getting any power to the unit. I've connected yellow to what looks like redish with a blue stripe, and black to brown. Haven't connected the red cable to the third cable available yet, that looks like a pale brown. I need help

• 
  @SaultiBalldeip7 ай бұрын

  Man, this whole MOST box has been a HUGE headache for me. I have 2 ML's and both do the same thing, even with 2 different MOST boxes! All wired up correctly but it is almost as though the MOST box doesn't send a signal to the HK amp fast enough and thus the amp just goes to sleep, doesn't send anything and I get no audio as a result.