i have made the plate but i have only 40 % of accuracy
@YassinSelling23 сағат бұрын
hy men i just start learning
@saturated302223 сағат бұрын
😳😳🔥🔥🫡
@Jose_jani_Күн бұрын
after changing size i cannot zoom in, i have tried with selecting the depth option in the preferences, worked for once but after sometimes still have the same problem.... what should i do?
@CharlesFDКүн бұрын
Looks like apple😂
@StalemateNZКүн бұрын
This was awesome. Did it in 2 days, couldn't stop. Thank you.
@aa.xviiiiКүн бұрын
Loool I was doing so well, this is where he might lose me
@MasterOfBytesКүн бұрын
If by someone the mask isn't showing but working, then it is maybe because the X-Ray mode is still on. One has to switch it off to view the mask.
@ParamLakhwaniКүн бұрын
When I am applying my subdivision modifier on either icing or the donut I just can not grab the vertex, instead whole icing or donut is moving around Please help!!
@usamaahmedfilmsКүн бұрын
I am unable to see the mesh 06:45. I have tried eactly the same steps as told by Adrew again and again but nothing seems to work. Can someone help me?
@Donut-BoxersКүн бұрын
every time i try to duplicate and move the donut it snaps to the plane in the center
@cronrowsКүн бұрын
my plane is just a mirror for some reason and i cant fix it
@hoesmad8035Күн бұрын
im back after like 4 months of not following the tutorial, i fucked up with the long sprinkles they just wont show up LOL but im still gonna keep at it, im gonna watch the whole tutorial series again after im done. i wont give up!!
@lexa7250Күн бұрын
R.I.P my 8GB RAM laptop 😢
@Dragon_IslandКүн бұрын
I've done 3D before but my teacher wasn't as nearly as good as you! Hoping to relearn 3D with blender since I can't afford 3Ds Max or Maya. Thank you for this tutorial! I hope to broaden my skills to create my own things!
@jennycreative1Күн бұрын
I got completely stuck on scale. Blender was lagging so slowly that it took forever and when I went to apply scale. It didn't scale the icing. I guess I'll try an start over. Sigh.
@Mary-fi5qrКүн бұрын
Why didnt we just keep the size smaller from the start?
@KoreanGirlAssКүн бұрын
How come when i duplicate my donut, and try to move it along the x-axis, it goes downwards and then clips through the plane? but then stop at the halfway point of the donut. So basically only the icing is above the plane
@thecurthyКүн бұрын
Instead of Using "Rotate Euler" and rotating the sprinkles beforehand. Use "Rotate Rotation", plug "Combine XYZ" into "Rotate By", set X to 90, plug "Random Value" into Y and Z and set it to float, lastly play around with the "MIN" and "MAX" values until it looks good.
@emmanuelsaie7882Күн бұрын
I'm a victim of your subscribe tactic. Well done :) lol
@Vynitrix.Күн бұрын
In blender 4.1 "I" shortcut were changed to "K" as he said it'll change in future
@clipso9061Күн бұрын
watching this in double speed to fight adhd
@LimLuxКүн бұрын
KZreadrs and multimillionaires/billionaires are moving away from the US and you want to move TO the US!
@taliaj6483Күн бұрын
What’s wrong with Australia
@ngoproКүн бұрын
Finally, after never finishing two attempts prior. On my third, I finally finish these damn donuts.
@beanie2571Күн бұрын
BOOOOOOO
@donaldsparks_Күн бұрын
#MAYBEONEDAYWILLJOINBLENDER ( lmao )
@harleystubbs6199Күн бұрын
4:20 I’ve added color ramp, and the color didn’t change, any fixes?
@LimLuxКүн бұрын
Euler the great mathematician was neither French nor German, he was Swiss.
@arunawalkerКүн бұрын
Ok, I've reached the point with the collections and I'm kind of proud that I've been doing that from the beginning. Professionally working with Creo has taught me the value of a clean model tree via groups in assemblies or in large plates with thousands of holes so I just unconciously started putting things in collections. I pathologically name all my KEs and groups so I can tell how I changed things just by looking at my model tree.
@opslakshevent1590Күн бұрын
Realistic lighting and textures. Looks very much realistic 👌
@alideep9656Күн бұрын
Thank you
@soullessmuffin9493Күн бұрын
the colour isn't working for some reason
@er-stereoКүн бұрын
i was doing this on my thinkpad t460s with 128MB VRAM. i completed the project and after few days the ""GPU stoped working""
@SnowInHereКүн бұрын
AMAZING
@anushruttechgaming7147Күн бұрын
Sir why my all donut colours get deleted and get same pinkish colour everytime I open the blender although there name is written as chocolate and yellow only
@starchman8758Күн бұрын
i been waiting for some WASD
@milvusmc44712 күн бұрын
Thanks for ur Tutorials ❤
@louismatousian29352 күн бұрын
spoiler alert it is not free
@SnowInHere2 күн бұрын
lOVE THIS!
@user-lq6dp1xj9p2 күн бұрын
My 4 sprinkles should be randomly placed with each other. But 4 are one body, can anyone help?
@MethodMn-302 күн бұрын
0:15 for subscribe, i unsubscribed :\
@jbdh65102 күн бұрын
Hi Andrew, it would be amazing if you'd considering doing this test in 2024 :)
@user-ln2nx8sc9v2 күн бұрын
You should have told us the bonus part earlier cuz I wasted 20 mins💀💀💀💀
@JasUwU3_32 күн бұрын
I don't have the options thing in the bottom left of my screen...
@ali_the_grass_blockКүн бұрын
Select the object and click F9
@arunawalker2 күн бұрын
Gonna have to get used to that whole making things imperfect thing, cause my Creo using technical product designer brain was screaming at me the whole time. It was telling me the to make all my numbers as even as possible and deforming the donut almost caused me physical pain. In technical drawing / modelling you make something theoretically perfect and then essentially give parameters / tolerances how close to that perfection the object has to be when it is actually produced. So very much the opposite of the "imperfection is the new perfection" thing 3D artists tend to have.
@thisajaariyasinghe40192 күн бұрын
poisson means fish in french so poisson disk is just fish disk
@foxwoosh2 күн бұрын
Every time I try to press G and select an axis (Z for example, like at the beginning of this video) I get not an absolute axis but kind of "the relative to my screen" axis.. And when I move my object it just goes "deeper" relatively to my screen, and not higher in the world space.. what am I doing wrong?
@foxwoosh2 күн бұрын
Nvm I've figured it out. I sad snapping enabled :)
Пікірлер
It crashed my whole laptop
i have made the plate but i have only 40 % of accuracy
hy men i just start learning
😳😳🔥🔥🫡
after changing size i cannot zoom in, i have tried with selecting the depth option in the preferences, worked for once but after sometimes still have the same problem.... what should i do?
Looks like apple😂
This was awesome. Did it in 2 days, couldn't stop. Thank you.
Loool I was doing so well, this is where he might lose me
If by someone the mask isn't showing but working, then it is maybe because the X-Ray mode is still on. One has to switch it off to view the mask.
When I am applying my subdivision modifier on either icing or the donut I just can not grab the vertex, instead whole icing or donut is moving around Please help!!
I am unable to see the mesh 06:45. I have tried eactly the same steps as told by Adrew again and again but nothing seems to work. Can someone help me?
every time i try to duplicate and move the donut it snaps to the plane in the center
my plane is just a mirror for some reason and i cant fix it
im back after like 4 months of not following the tutorial, i fucked up with the long sprinkles they just wont show up LOL but im still gonna keep at it, im gonna watch the whole tutorial series again after im done. i wont give up!!
R.I.P my 8GB RAM laptop 😢
I've done 3D before but my teacher wasn't as nearly as good as you! Hoping to relearn 3D with blender since I can't afford 3Ds Max or Maya. Thank you for this tutorial! I hope to broaden my skills to create my own things!
I got completely stuck on scale. Blender was lagging so slowly that it took forever and when I went to apply scale. It didn't scale the icing. I guess I'll try an start over. Sigh.
Why didnt we just keep the size smaller from the start?
How come when i duplicate my donut, and try to move it along the x-axis, it goes downwards and then clips through the plane? but then stop at the halfway point of the donut. So basically only the icing is above the plane
Instead of Using "Rotate Euler" and rotating the sprinkles beforehand. Use "Rotate Rotation", plug "Combine XYZ" into "Rotate By", set X to 90, plug "Random Value" into Y and Z and set it to float, lastly play around with the "MIN" and "MAX" values until it looks good.
I'm a victim of your subscribe tactic. Well done :) lol
In blender 4.1 "I" shortcut were changed to "K" as he said it'll change in future
watching this in double speed to fight adhd
KZreadrs and multimillionaires/billionaires are moving away from the US and you want to move TO the US!
What’s wrong with Australia
Finally, after never finishing two attempts prior. On my third, I finally finish these damn donuts.
BOOOOOOO
#MAYBEONEDAYWILLJOINBLENDER ( lmao )
4:20 I’ve added color ramp, and the color didn’t change, any fixes?
Euler the great mathematician was neither French nor German, he was Swiss.
Ok, I've reached the point with the collections and I'm kind of proud that I've been doing that from the beginning. Professionally working with Creo has taught me the value of a clean model tree via groups in assemblies or in large plates with thousands of holes so I just unconciously started putting things in collections. I pathologically name all my KEs and groups so I can tell how I changed things just by looking at my model tree.
Realistic lighting and textures. Looks very much realistic 👌
Thank you
the colour isn't working for some reason
i was doing this on my thinkpad t460s with 128MB VRAM. i completed the project and after few days the ""GPU stoped working""
AMAZING
Sir why my all donut colours get deleted and get same pinkish colour everytime I open the blender although there name is written as chocolate and yellow only
i been waiting for some WASD
Thanks for ur Tutorials ❤
spoiler alert it is not free
lOVE THIS!
My 4 sprinkles should be randomly placed with each other. But 4 are one body, can anyone help?
0:15 for subscribe, i unsubscribed :\
Hi Andrew, it would be amazing if you'd considering doing this test in 2024 :)
You should have told us the bonus part earlier cuz I wasted 20 mins💀💀💀💀
I don't have the options thing in the bottom left of my screen...
Select the object and click F9
Gonna have to get used to that whole making things imperfect thing, cause my Creo using technical product designer brain was screaming at me the whole time. It was telling me the to make all my numbers as even as possible and deforming the donut almost caused me physical pain. In technical drawing / modelling you make something theoretically perfect and then essentially give parameters / tolerances how close to that perfection the object has to be when it is actually produced. So very much the opposite of the "imperfection is the new perfection" thing 3D artists tend to have.
poisson means fish in french so poisson disk is just fish disk
Every time I try to press G and select an axis (Z for example, like at the beginning of this video) I get not an absolute axis but kind of "the relative to my screen" axis.. And when I move my object it just goes "deeper" relatively to my screen, and not higher in the world space.. what am I doing wrong?
Nvm I've figured it out. I sad snapping enabled :)
This gave me motivation