You made it to part 3, great job! The icing is one of the most fun parts of the donut-building process. If you are struggling to get the vertices on the drippy parts right, take a step back, breathe, and start over on the icing if you need to. There’s no rush, and they don’t need to look perfect. Just take your time. It’ll turn out great!

@joelt7869

6 ай бұрын

haha the way you speak sounds like you are talking to a mentally unstable person that will have a meltdown. but that was me when I did the donut tutorial in 2019.

@DangericeDreams

6 ай бұрын

@@joelt7869 Funny enough, I’m literally just pulling from previous experience working on these donuts. 😅 It’s fun stuff, but it really can feel a bit overwhelming for people just starting out. I’m glad I’m not the only one that’s felt this way. :)

@bloodylizard3158

6 ай бұрын

@@DangericeDreamsbe a therapist, like actually.

@Fragu1308

6 ай бұрын

I'm using the same version as Andrew is but I don't have the snap to face option, instead I have the snap project directly. Is this fine?

@daakshadhaanvi7469

6 ай бұрын

Thanks man =)

No1 Quick tip at 09:15 for beginners. Kindly take note so that you dont run into issues. Modifiers are applied only in Object Mode. You cant do that in Edit mode so you should take note. How to move from Edit mode to Object mode, you hit Tab or you go to the top left side of your screen below the Blender icon row, You see Edit mode, click it and then a drop down appears then you select object mode, Then you can go ahead and apply the modifier at the modifier panel. Stay blessed No.2 You might find out that when you click and drag down, Your icing still goes through the donut's body and I faced similar issue. The reason is that you didnt select the tip of the icing at the middle part (Vertexes) To get around this problem. Toggle to X Ray mode. This is at the top right conor of your viewport on top of the axis gizmo or XYZ axis indicator. You see 2 boxes, and 3 globes. choose the 2 boxes icon so you can see the vertexes and you would immediately notice that you didnt select the middle vertex or the tip of the icing.

@Arunash97

5 ай бұрын

Bro Thank you actually I was stuck in this part your comment helped me ❤

@eleanors3496

5 ай бұрын

Thank you! I was in the comment section looking for why my "Apply" was greyed out!

@shwarmashwar1415

5 ай бұрын

Legend

@kucekto

5 ай бұрын

Thanks!

@ULLR-

5 ай бұрын

I am legitimately in this comment section to work out why i could not apply it. THANK YOU!

He always finds a way to teach something new, despite he is building the same thing fourth time. He is a very good teacher. He also adds an entertainment factor in his tutorials to not make his pupils bored.

@engideergaming

6 ай бұрын

that's called edutainment

@JimyRoze

5 ай бұрын

Agreed

@ausaiden

3 ай бұрын

Good comment. I had to start again from scratch four times before I realized where I was making the same error. Which is really a good way to learn. Ended up understanding better exactly what each option actually did.

@Donut33968

2 ай бұрын

I am donut.

@shadowking773

8 күн бұрын

@@Donut33968 nom nom 😋

For those who are still having the issue with the icing going through the donut, I found a solution by clicking on the "Snap" menu and checking the "Project individual elements" box. I'm a beginner myself, so I don't fully understand how this checkbox works, but it did the trick for me. Good luck with your donut creations!

@eg6694

27 күн бұрын

This literally solved my issue! Other people’s advice wasn’t working, this did the trick thankss 😅😅

@alisaffankokoglu9053

25 күн бұрын

If there are ones still having problem even after this solution they may increase the thickness in the solidify at first if they did not. At least these two solved my problem and currently it works.

@BubblegumKoi

5 күн бұрын

i believe thats the option that worked the same as how the "face" one did in the video, but they changed what it was called and gave something else the "face" name

@matiasnahuelenriquez9845

4 күн бұрын

geniuus

11:40 If select more/less doesn't work for you, it's probably because you don't have a numpad you need to emulate your numpad to make it work. To do this, go to Edit, Preferences, Input, Emulate Numpad. It should work now. I ran into this issue.

@ekkkkksh

4 ай бұрын

This worked for me, thanks so much!!

@Razor_Crest

4 ай бұрын

@@ekkkkksh No problem. Have a great day!

@_Nobody___

4 ай бұрын

THANK YOU SO MUCH!! I had so much trouble with that one

@user-vv3gu7uw8k

4 ай бұрын

Thank you, GOD Bless you

@jimaessi9893

3 ай бұрын

thank you sm!!

I just want you to know that I am an art student in college, pursuing an animation degree. My Illustration teacher actually recommended I watch your tutorials and learn blender since I am ahead of the class. This is to help me make a pub scene for an animatic I am working on, so that I don't have to be fussing around with perspective in the drawing process. This is so clear and easy to follow! I hear about Blender being a nightmare, and maybe it has something to do with me being an art student in college, but I actually find this to be less intimidating than I ever thought it would be thanks to you!

@Colesia_EMA

5 ай бұрын

Good luck. I hope you can get something in the field straight out of college. I dropped out I've worked shitty job after shitty job. I've been lucky to work some in the movie industry but other than that, it's been a struggle. Keep it up and finish this thing as well as your pub scene. You got this!

@Lair_in_Limbo

5 ай бұрын

@@Colesia_EMA good luck to you too, your break will come. I can feel it

@Colesia_EMA

5 ай бұрын

@@Lair_in_Limbo I feel it too. I'm 35, single, no kids, and I have alot of spare time. I'm goin for it.

Thanks for another great tutorial! I have a few tips for people running into problems: 1. If the bottom edge of the icing is hidden inside the donut body, you can select the bottom edge to scale it up a little bit on x-y plane. 2. The key combintation to select more on my PC is control-numpad +, not control-+ 3. Some of my icing was clipped by donut body after I pulled down the bottom edge. I selected a vertex on icing, and used ALT-S with proximity editing to push it out to fix the clipping. I struggled a lot with the icing part in the previous version of this tutorial. This version is much better on a few details, I had far less trouble to follow along. Well done!

@supersauce6142

6 ай бұрын

thankssss

@topjben

6 ай бұрын

Thank you for your tips! Do you know why face snap wouldn't work? I tried to apply scale to both objects but it still does not work :s

@blackhoundrise8431

6 ай бұрын

Thank you. this helped coz i was panicking wondering where the bottom edge of the icing had gone on mine. 👍🏾👍🏾❤❤

@SchweinchenJ

5 ай бұрын

Thank you so much!

@TheLuxaryLuxray

5 ай бұрын

W Comment

i crashed my blender

@Iowwicked

15 күн бұрын

I crashed my lap

@andy-gamer

12 күн бұрын

I crashed my car

@jrgamerelite5287

11 күн бұрын

I crashed my fridge

@PlanegeekYT

8 күн бұрын

Me to😢

@Ector_902

8 күн бұрын

I crashed my life because that fricking 3 year old crawled into the road

By far the most difficult. I had to restart and took me 2 hours to finish this episode. I don’t regret it because it looks so good even without color

@mwah4rae

4 ай бұрын

omg i thought i was trippin cuz ts one is definitely a bit more difficult than the others 😭

@TheManudo00

2 ай бұрын

@@mwah4rae Its all on getting used to the hotkeys TRUST ME there is a lot of try and error i started before with a different tutorial from another youtuber so i already knew a lot of of the hotkeys for what he wanted to do, and it still took me about half an hour, dont give up

@axel3689

2 ай бұрын

@@TheManudo00 u think you'll beat dortmund?

donut bros, we're all gonna make this donut inshallah

@babytiny5807

Ай бұрын

inshallah your icing drips as allah wills it to

@user-sy7ct2ls8t

8 күн бұрын

inshallah

@roostergamer786

5 күн бұрын

Inshallah

@uronthefbiwatchlist341

4 күн бұрын

inshallah😤

@EradicatorMKICombat

2 күн бұрын

finished that donut yet bro?

Man this is a throwback to see a new version, I was starting blender right when the last one was posted and it was the first tutorial I ever followed. Thanks for starting mine and many others Blender journeys Blender Guru!

In 12:20, if your ctrl + zooms instead of selecting more, try to use the + on the number section on the most right of your keyboard

@autumnGH

4 ай бұрын

thanks

@cobalt610

4 ай бұрын

i dont have 2 +s

@Vykrex

4 ай бұрын

Lifesaver, I was going nuts. Thanks!

@future7040

4 ай бұрын

thank you

@agentclol

4 ай бұрын

I have a TKL keyboard 😭 nah but i just rebinded most of my numpad stuff, im jk

I've been doing Blender for more than 2 years now and this is the first time I watch a donut tutorial! I knew there's gonna be something that I didn't know about... thank you.

It's a real pleasure to watch your tutorials because you really explain things in a beginner's way but still go into depth. Thank you for being such a good teacher.

Honestly these got so much better over the years. For the first time I tried to create donut in blender 2.7 back in 2021, it was like THE first thing I tried to do in blender ever, and so many things were unclear and required searching for answers on the internet, this is just a smooth sail from start to finish so far, I love it and I know people who will open blender for the first time will love it too

I've been using Blender on and off since 2018 and I've done all your Donut tutorials so far. I've modeled other stuff, this admittedly DOES become basic, but the less button presses you have to learn, the more you see why even basic scenes look great :) There's a lot to learn even if you've done it before :)

I started doing your Blender tutorial on a whim last week and had gotten most of the way through it when I got excited about Blender so I started watching your other videos and reading your blog only to find out that Blender 4.0 was coming out the next day, so now I'm thrilled to get to go through this brand new tutorial series with the new version! Thanks for doing what you do!

I've been putting of learning blender (to any degree) for years, but I'm glad I started with this series, amazing quality. The pace is also great, not to slow or fluffy. Great work!

For the selecting and hiding of the internals of the icing and adding and removing rings of vertices from the selection, make sure to use the number pad's + key, not the plus on the row with numbers below F12.

@popcat952

6 ай бұрын

thanks, it confused me.

@seasonsarecool

5 ай бұрын

thank you! ctrl + + was just zooming in the view, this helped

@qwerty-lu3wd

5 ай бұрын

thank you so much T_T

@divyanshdivyansh7351

5 ай бұрын

Thanks even if it dosent help muhc I have an 60% Key Board ＞﹏＜

@xenoglossia_ch

4 ай бұрын

thank you! i don't have a numpad so i was very confused.

WIth the face project bit, if anyone else is having trouble "Project to individual elements" is a CHECKBOX now, diffrent from how it is in the video. Took me like 10m to figure out and hope this helps someone.

@Adzii7777

24 күн бұрын

god bless your soul

@zellot_gaming

11 күн бұрын

I knew someone would answer this question somewhere here :D

@BubblegumKoi

4 күн бұрын

thank youuu

Wow! The fact this experienced teacher goes through the steps slowly and little by little is really helpful. So excited to continue working on my donut!

@BlindingSun_

20 күн бұрын

how's your donut looking?

@botepaw452

19 күн бұрын

@@BlindingSun_ Terrible. Had to restart two times.

It's like the seventh time i started this tutorial over the years, and it's still a pleasure listening. Thx for the great content.

Unlike many other tutorials that always either skip over crucial detail like how to even start editing the node, or always goes too slow and tells you each individual step like (move your mouse. Click on the left mouse button. Move away from the button.) etc, your ones are perfect. While some of the keybinds aren't the same as on my computer, a simple search easily fixes these problems. [ You earned a new subscriber! ]

Been cooking up my donut for the last two/three days and just got got through part 3. Thanks for your help my dude, wish me luck boys!

Your newsletter is literally the only one I have, and it does not disappoint, highly recommend :)

Loving the tutorials, the fact you seem to a good communicator helps massively. Thank You for sharing your knowledge.

I'm an 11 year old from India who loves 3D and I wanna become a filmmaker when I grow up. Your tutorial has helped me a ton and I'm really inspired from these videos. I've followed your last 3 series and hope to complete this one too. So thank you Blender Guru! You're my inspiration!

Yaaay part 3! Following and learning as you post. You are a blender legend. Thanks for this!

in 9:45 if your "apply modifier" is greyed, make sure you temporarily switch to Object mode instead of Edit mode. It should work then (actually you can see it changing on Andrew's screen if you pay attention, which I didn't :) )

@vaporjem

6 ай бұрын

THANK YOU, HOLY-

@brounee2

6 ай бұрын

I click it and it says ''the modifier is disabled, omiting its application''

@brounee2

6 ай бұрын

now I fixed it, but I dont see the vertices anymore help this is giving me a headache

@Addijoshua

5 ай бұрын

@@brounee2 Look to the right side of your viewport and see where your objects names are which he reffered as the inventory and be sure you selected the icing. After clicking it, bring your mouse to the viewport or where the donut is and then hit tab to go back to edit mode and then you will see your vertexes back. Bless

@benjamindemontgomery6317

5 ай бұрын

NO matter what i do my modifier just disappear. is this a bug?

The philosophical value of that tutorial is from another world. "The other side of the donut" - love it.

Did the first version of this tutorial when it came out and after years of daily Blender use i still enjoy watching this...and even pick up some handy little shortcuts that i seem to forget

It's funny to be back to watching Blender videos. It was one of the first software packages I learned several years ago when I was starting my 3D journey. I didn't stick with it because I was told that Maya was necessary to get a job in the industry. So, I learned Maya. Then, I got my first 3D job, which is where I still work now, and come to find out that the department uses 3DS Max. So, I Iearned Max. Now, Blender has received exponentially more updates and improvements than Maya and Max and is accepted in the industry. I'm tired of paying a lot of money on software subscriptions and dealing with rigid/limited functionality. So, now I'm learning Blender again, but with great gratitude for such organized and clear tutorials. Thank you for making these great videos and putting them out there for everyone to benefit from!

@Wiifan5551

2 ай бұрын

I started out learning Maya in high school, but Blender is great because it's free lol If I may ask, where do you work?

@elizabethivy1337

2 ай бұрын

@Wiifan5551 I work for Ashley furniture in their CGI department. The focus is mainly archviz content, so the models I make and QA are mostly high poly, but we also work with other folks to convert everything to low poly for AR/VR usage.

Try Shrinkwrap modifier for the icing, in that way you don't need to apply Subdivision modifier and also if for some reason you want to do any change to the main donut the icing will follow

@thebaotranphan7981

5 ай бұрын

Shrinkwrap is an advanced modifier, all these actions on the video are for beginners to understand and appl the 20% basic

@Colesia_EMA

5 ай бұрын

I used Shrinkwrap after I did my extrusions. That had the best result for me after applying the Subdivision Surface modifier. That way I was guaranteed enough mesh to work with. Shrinkwrap kinda seals the deal and gives it that extra layer of Snapping I noticed. Similar to real Shrinkwrap when it's used to wrap something real tight.

Struggled with some of the modifier bits in this one, but finally got somewhere I'm happy with. Enjoying the process immensely. Once again, thank you Andrew.

I remember when it used to be only one tutorial series. I tried to follow it back then. Then, some time later, the second version of that series popped up my screen. I tried again, and didn't finish it again. This time I really wanna finish that goddamn donut and start doing cool stuff with blender! Thanks for your tutorials

thank you for making this. blender 4.0 is quite difficult for me and this series is a huge help

Hiii 😁 , If you are having trouble creating a wavy edge (at 13:05) and you do not have a mouse or are having trouble with your mouse wheel, you may notice that moving vertices affects everything. This is because the Proportional Editing Influence radius has not been decreased, causing everything to move by default. To fix this, simply use the mouse wheel (the most optimal method) or press Page Up to increase and Page Down to decrease the radius. Once you have done this, you can shape the icing as desired .

@ashishpawar2611

5 ай бұрын

Thanks Man

@thegoodally101

7 күн бұрын

Thank you so much

This is what makes a great tutorial, very engaging and easy to follow. I was able to go through every step with almost no hiccups.

Hi Andrew. I started a couple of years ago in Blender, but got caught up in other stuff. I returned to Blender recently, and to my surprise, you made an updated tutorial! I can see clearly how much effort you put into discussing small problems that we might face in certain parts. So just wanna say: Wow! You are an amazing teacher. Keep going🦾

The "Ctrl + Plus" and "Ctrl + Minus" commands are tricky. You'll probably have trouble at first. It's actually "Ctrl + NUMBERPAD PLUS" and "Ctrl + NUMBERPAD MINUS"

@theosiris4179

24 күн бұрын

Thank you!! This fixed my issue!

A new generation of 3D artists is emerging right now, watching it))

Man I remember the times when I was just a beginner trying to learn blender and the first tutorial I watched was from you. Good old days :)

Without any introductions, you are a superhero. You are literally capable of solving any problem you encounter👍🏻👍🏻

I'm not seeing the "Snap individual elements to" option at 8:30

@thegoodally101

7 күн бұрын

Me too, im stuck

@carrotized

5 күн бұрын

@@thegoodally101 I think it has to do with the version of blender you're using; I started the tutorial yesterday and ran into the same problem but it was because I was using 2.91 blender lol

Who knew deleting the bottom half of a mesh could feel as satisfying as eating the top half of a real donut? 🍩

Thanks so much for making this, I just started watching your last tutorial and got stuck at part three and this resolved every problem I was encountering and explained it thoroughly.

i have already completed your 2nd donut tutorial , but i also watched the 3rd and now am watching this .. and every time i learn something new ..totally recommend .. blender guru the blender gangster

the edge of extrusion at 19:10 is not circular in my case it is a straight line

@lindsaysepicjourney

4 ай бұрын

same idk what to do

@wirenomad

Ай бұрын

same here :(

@emmagamble795

27 күн бұрын

I was having the same problem and realized my subdivision modifier was gone. I guess I closed it somehow. But adding it back made the extrusion drips look round instead of straight lines

@BBFunimation

16 күн бұрын

same happening here.

As in the older tutorials, when you're doing the icing, try looking at donut references to make it look more natural.

@Sin_Alder

Ай бұрын

Ideally using real donuts, picked up either at your local bakery or a grocery store. Not necessarily for practical reasons (although yes), but primarily so you have delicious chunks of frosted/glazed fried dough to munch on.

I consider myself a advanced Blender user. Yet i catch myself watching and doing these donut series. Because somehow he comes up with stuff that i never used before. Such as changing the inner crease in the solidify edge data. I've never played around with that, and now i can think of multiple situations when i wished i knew this earlier.

I started watching the 3.0 tutorial, then 4.0 came out. I quit so I could wait for the 4.0 tutorial and follow that, and he has really improved on answering questions that people may have, cause last time I had a lot of questions he left unanswered.

This is an absolutely awesome tutorial series as always. I have been here since the blender 2.8x days. Too bad my computer is to old to be able to run blender 4.0. :(

@andriimarchuk8121

6 ай бұрын

It doesn't need a new version so far to follow this tutorial

@kieranmaxson5269

5 ай бұрын

@@andriimarchuk8121 I got about halfway through this video before I realized I was using 2.92 instead of 4.0. I only realized cause the all components face snapping option wasn't there. Kind of cool how similar the UI was kept while adding new features

Good tutorial. Your lessons are prescious. About 18:49 ... For some reason I can't afford making a spheric drop of the icing: It makes a square shape drop not what it supposed to looks like in the video, when I slide the ridges while tapping E. It doesn't even following the liquid shape around the edges, it's geometrical. Can somebody please help me?

@marsh_og

Ай бұрын

same problem with me need help

@MidirSD

26 күн бұрын

Same

I started blender with the 3.0 tutorial just 2 months ago and finished after 2-3 weeks (it was hard lol). This new tutorial seems much simpler and easier imo. Very beginner friendly! Thank you so much for keeping us up to date with changes when new versions come out

Wow, really appreciate these tutorials. I’ve definitely learned what tools do what and feel like I’ll really be able to apply the knowledge and learn from it. Thanks for the effort you put in to these videos.

Editing my previous comment from yesterday. So I decided to start completely over for about the 20th time just to make sure I had a clean slate. I inadvertently started watching the 3.0 series I had zero issues. I don’t know if it was because you use a different scale or the fact that you cut the donut in half and then duplicated the top but I made it all the way to geometry nodes today in about 3.5 hours! I even downloaded the blender add-on from your site and it worked perfectly. Thanks for everything.

No matter how many tries, I somehow managed to make myself never clip the icing properly

@rishilmangukiya

Ай бұрын

Same it's so hard

When talking about applying the subdivision modifier at 09:15 it may be useful to note one detail: By doing so, you apply the modifier to the entire object *and* *then* *remove* *it* *from* *the* *set* *of* *all* *modifiers* . I was slightly confused that, after applying, it vanished from my view :)

Maaaan, I'm meditating on your tutorials. So incredibly detailed and helpful. I'm a filmmaker, but was always amazed by 3D and VFX, so decided to give it a try and absolutely loved just changing the shape of the donut in part 2. :D so satisfying to see it bounce. Can't wait to learn more. Taking it slow to have good foundation. 🙏🏼🇨🇿

This is by far the best tutorial I have ever seen. I learned most things off of tutorials, but this is just another level.

Instead of rummaging through menus there's a SINGLE magic keybind everyone should know - it's F3 - it opens the "command palette", aka searching through all the menus/actions :)

The control + Plus command he is referring to at the 12:00 mark is the plus that is on the numpad, not on number row (just had to point it out as I was stupid enough to be doing this and not know why I was zooming in and out).

@Colesia_EMA

5 ай бұрын

I had the same problem

You are a saint, just picking up 3d stuff because its free and interesting. I have to say you make this feel so fun and a goal that can actually be reached.

Thank you so much blender guru! I've been wanting to learn 3d modeling for years now and I've tried every tutorial and your's has finnaly worked for me! Thank you!

duplicate - shift+d cancelling movement - esc(escape) or right clicking naming objects - select object name in outliner or F2 switching modes - tab box select - right click and dragging out a box toggle x-ray orthographic mode delete - vertices etc. z fighting add modifier - generate - solidify render properties - offset thickness hiding a modifier from viewport snapping vertices to face snap individual elements to - face project applying a modifier select more / less tool - ctrl + "+" for more - crtl + "-" for less hide - h unhide - alt+ h edge data - crease inner selecting multiple vertices - shift then select next vertice extrude - e

@Colesia_EMA

5 ай бұрын

Select More/Less Tool: "Ctrl + NUMBERPAD PLUS" and "Ctrl + NUMBERPAD MINUS"

@sda9650

5 ай бұрын

thankx 👍

@Colesia_EMA

5 ай бұрын

@@sda9650 Thank you as well. The information above is very helpful and that was very kind of you to take the time to post all that.

@Colesia_EMA

5 ай бұрын

Something I learned from CG Fast Track Instead of duplicating with Shift + D Try using Ctrl + C to copy and Ctrl + V to paste your object in. This is good if your object has materials on it and you want to not only copy the object but it's exact materials as well. This method will guarantee that. If your mesh is still just a mesh though and you haven't put any materials on it or your copied objects, either method will work.

I Love how engaging he is, so funny and easy to follow, explaining everything he's doing

I just want to say that im only on the 3rd part of this tutorial and you make it so fun and exciting to follow along. I am so excited to learn from you. Thank you so so so much. I really do appreciate this.

hello darkness my old friend

11:55 If Ctrl + (+) didn't work for you and zoomed in instead, select the + on the numberpad.

@alexm9104

6 ай бұрын

If you have one, ahahahahaha... ha... Why Blender default keybindings are so weird?

@Itzame3756

6 ай бұрын

Thank you, I hope the other side of your pillow is so cold when you flip it tonight

@Smybi

Ай бұрын

​@@alexm9104do you know how to do if you don't have one?

@elitusdelitus1509

29 күн бұрын

@@alexm9104I really do need to know

Well, just finished Part 3! I'm very excited to get to Part 4 now! 🤩🤩

I followed through the prev donut tutorial months ago and watching this brings back so any memories..

18:49 my drips are flat at the end instead of circular

@marsh_og

Ай бұрын

same here

@arksi6742

Ай бұрын

@@marsh_og Make sure you generate another subdivision Surface after applying it the first time. it will smooth out your extrusions.

thanks for part 3 Andrew, finished it and learnt this: duplicate: shift+D Renamne hotkey: F2 in 3D viewport chnage the viewport: TAB [Obj or Edit mode] Select a mesh wihtout losing the view of the otherside: toggle X-ray in top right : ALT+Z solidify modifier: add it and change offset to make the object appear solid [bigger] hide a object in edit mode by toggle option snap+proportional...= press G and pull a vertex, and use scroll to adjust the size, now you can change the object state with the mouse. objects getting intersected? add more geometry by clicking on obj and selecting the subdivsion modifier in obj mode and click on apply Alt+left click: on a vertex to select the entire group of connected vertices Ctrl+ and Ctrl- when a vertex selected: will increment more group of vertices H to Hide and Alt+H to unhide Thick and Rough looking model? add a subdivision surface modifier. Sharp looking object? change the crease in solidify. Solidify>Edge Data> Crease Inner

@Colesia_EMA

5 ай бұрын

Ctrl + NUMBERPAD Plus and Ctrl + NUMBERPAD Minus for the increments

@pree3d

5 ай бұрын

@@Colesia_EMA All the best! Stay motivated!

@Colesia_EMA

5 ай бұрын

@blenderrenders1 You too my friend. You have a great skill set already based off of what you wrote up there. You're going to do big things. This community is bigger than ever, but still small enough to where there's an opportunity for all of us

@pree3d

5 ай бұрын

@@Colesia_EMA 💛💯

@naturesvalley1053

2 ай бұрын

Alt and left click does nothing for me...can you advise please

Dude I love seeing these tutorials again it really takes me back.

I remember when I tried to do this last year, on the tutorial before this one. This is where I stopped, but I made it past this time! I'm going to finish my donut this time, no matter what.

At 8:45 i can’t make the points not clip through the donut! There is no option for snap to face! Only snap to face project :(

10:17, go to object preferences > viewport > tick "infront" it stops the mesh snapping to the inside and forces all mesh faces to the surface

@anniegao2973

5 ай бұрын

Where do i find the object preferences? Is it just blender preferences? Im on blender 3.3

@afafmellaha

5 ай бұрын

i cant find it in blender 4.0

@user-vv3gu7uw8k

4 ай бұрын

GOD Bless you and your generations

I can't thank you enough for doing these tutorials for free. I desperately want to learn this skill so that I can create my own 28mm mini figures but my brain just doesn't brain properly any more. I had a mental breakdown at work years ago and they put it down to PTSD from Iraq. I have been bumming around not able to work since then because every time I try something I just fall flat on my ass again. Your course is really accessible and although I am still finding it incredibly hard to understand, I am able to go back and replay and slowly I think I might be able to actually enjoy doing this one day. Thank you very much!

There's something so cool about these videos. Like if you're struggling on something, you might get frustrated. But then you remember, you're just making a delicious donut.

Modifying the Edge Data > Crease inner has no effect on the shape on the icing for me.. I'm on Blender v4.0.1

@ChibiChunks

6 ай бұрын

Same for me, idk how to fix it other than maybe join the objects?

@criscringle6627

6 ай бұрын

Same. Ever find a solution?

@criscringle6627

6 ай бұрын

Nvm I think I figured it out. @15:48 -- For whatever reason, having that second "subdivion" modifier added, it then was able to make a difference when I changed the initial "solidify" modifier edge data.

your tutorials are so clear and the information is actually being stored in my brain. thank you very much

The most comfortable beginning in the soft!! Thank you, dude

If you find that the bottom of your icing mesh is hiding beneath the donut after editing a vertex, you can fix it by resnapping the entire outside bottom row of vertices to the face of the donut. You do this by Alt + Click a vertex on the bottom row which should select the entire ring. Then change your snapping to "Face nearest" once you edit it will snap to the closest face, which would by the outside of the donut on it's corresponding side. If you snap with "Face Project" it will take all the vertices and snap them towards the face you're looking at. Once you hit the edit button "G" everything will snap to the face accordingly and then you can left click to commit the snapping.

@elaobornikova4479

4 ай бұрын

you're a lifesaver! Thank you

Tutorial is broken. Snapping menu has changed. Cant get past 7:30

Thank you so much! Hands down my favorite Blender tutorial so far!

I love your videos...I think It's because you share a sense of humor which keeps our attention in place.

Ok so the only issue I’m having is the snapping to the face. I was able to get the parts that I adjust on the sides (the icing) and those areas would then snap to the doughnut but the rest is just kinda floating. So I would then have to go all the way around forcing each area to snap to the faces. Any suggestions are much appreciated. This is also only my 2nd day plz be nice everyone lol

@duckymaster5904

5 ай бұрын

my icing isnt even snapping to the donut ;-;

@TornFromHell

5 ай бұрын

@@duckymaster5904 did you try snapping it to the face before sculpting? I went back and redid my icing and started by snapping it to the doughnut and it seemed to work better for me

@TornFromHell

5 ай бұрын

@@duckymaster5904 don’t give up tho mate!

@Colesia_EMA

5 ай бұрын

Don't forget to apply your Subdivision Surface modifier. To do that, go to your Modifiers, click on the little arrow on the top right and hit "Apply" When you first copy and form your icing, it's not going to have a lot of vertices. If you apply your Subdivision Surface modifier to add more vertices, you'll have more mesh to work with and you'll notice you have more control. Don't give up. There's going to be a lot of instances where you spend 30 minutes to an hour finding out something stupid. It's all part of the process unfortunately. People like myself will do our best to help, but some things you just have to keep at it to figure out. I believe in you all.

@TornFromHell

5 ай бұрын

@@Colesia_EMA a much more educated response here. Thank you 🙏

I'm bout to be so tired of looking at the same pink donut

So much knowledgable content can't get enought of it.🥰

I delved into the realm of 3D when I began watching your videos on KZread, so thank you very much!

At 4:00 why does my whole bottom half disappear

@okaox7906

4 ай бұрын

como resolve? skadfksjakmkdas

@nacholilli100

3 ай бұрын

@@okaox7906 duplica antes mano

@oscarfrancoisdesatonaka7217

Ай бұрын

you have to duplicate it before perform that action

Was doing well until it got to this icing stuff, now I want to bash my head against the wall. nothing you say works and every thing I click does the opposite of what yours does...

Thanks a lot I learned so many new stuff from you today a bit too much to handle all at once but I'm sure with time and practice it gets easier!

After watching it 5-6 times, was finally able to create one, excited for the next video

I'm going to sound like I'm nitpicking, because I am. As a brand new user, I need meticulous explanation of things which isn't happening. You speak and move a little too fast and didn't explain the fact that as you add modifiers they stack up in the lower right hand window. Also, I'm not sure, but if you have a modifier like subdivision already assigned to an object, you can go back and scroll through the lower right hand window and find that Modifier and hit APPLY to add more subdivisions to that object, correct? Instead why can't you type in a new value for the amount of vertices if you want more? Hitting apply seems to be adding another instance of the same operation you've already done to the object. This app has non-destructive editing, correct?

@aydenlivezey6762

Ай бұрын

Bro needs a nap😂😂😂

@aronhelios1734

Ай бұрын

The modifiers are the non-destructive edit. They can be removed anytime by hiding from viewport or deleting them. If you apply them, you have changed you mesh in a permanent way. And they keep the file light, you don't want to have too many vertices.

I have tried animating and UI designing and I got pretty good at both, but i feel like modelling really is my thing. like it just amazes me how you can make something realistic out of basic shapes

I started learning Blender last year with your previous donut tutorial and now i'm actually having so much fun creatimg my own individual projects. Watching this tutorial as well because there is always something new to learn!

wow, this is like trigonometry for me. Every change you make, I have to find the key. It takes me 2 minutes for each step. This is my second attempt at blender so this will hilarious for me about a year from now.

I'm just starting out learning blender from your tutorial video! I can't wait to be able make donuts 😋

11:19 This! this is why i failed modeling the donut so many times, THANK YOU! for pointing this out, i thought i was going crazy when i was attempting this in your previous series

@ellishakristyniak9475

Ай бұрын

I am so mad I stopped the video for 2 hrs trying to figure out how to fix it only to finally hit play on the video and there was the solution......