Hello, I hope you are well, look, I am trying to do the programming but the ocd file is no longer available, the link is no longer available, I try with ocd files from the internet and I have no connection, what could I be doing wrong, I have already done it and everything is fine this time, I can't
@jacknguyen887021 күн бұрын
what does it mean by wiring the 4 pins onto a dashboard?
@georgeiannetta754928 күн бұрын
What is the eBay site for the red dust collecter?
@sentidointegralАй бұрын
Me encantaria más por bluetooth
@joemarck6667Ай бұрын
This is a great video! Instead of flashing all of these parts can you just purchase new or a kit? Thanks
@kevinmarchant9665Ай бұрын
wrap up the nail so its not exposed????? the whole transformer is the nail all joined together
@amirhoseinkargar3733Ай бұрын
ive a xiaomi365 controller and the board mosfets are healthy but i cant figure out why +5 and gnd are are shorted ....hint: there is an led pin on the board which goes to rear led indicator for brakes and etc which i shorted once accidentaly and it happend since then
@eduardovictorrafaeletacuri5875Ай бұрын
Sl90 ninebot para instalar el stlinck v2 problemas. Con iot
@MidnightWolfangАй бұрын
I know it's been a while, but I have a scooter that can't turn the Bluetooth on, it seems to not reset or something, it was from those that Uber was auctioning... If I remove C15 to reset it and put it back, will it work?
@eduardovictorrafaeletacuri58752 ай бұрын
Modelo ninebot sl90 flash
@learnchannel-89442 ай бұрын
Geeat, thank you I ask you, if I want to use the same ninbot cotroller in my eBike, how to connect pedal assist wires in my controller?
@nin1ten1do2 ай бұрын
just do it over BT.. is fien it wrk..
@nin1ten1do2 ай бұрын
FK KERS! hard!
@scewtersource3 ай бұрын
I call it steering column
@chrystians3 ай бұрын
Nice video. Where do you bought the pieces? Could you give the list? Thanks in advance
@firasgassab56753 ай бұрын
After I flashed my scooter I had an error 10 problem what should I do????? there is a program ???? can someone help me?????
@markcozzie4 ай бұрын
Did you do video how add custom battery?
@markcozzie5 ай бұрын
Link to contact you won't work?, where are you based as would love it if you could make mine go faster than 12mph?, many thanks
@robertoeugenefunksaltares74625 ай бұрын
Alguien sabe como se hace para que mi patinete electrico bongo cicotec valla a 25 kh
@jpaquett5 ай бұрын
Could you share the info on how the solenoid timing control work or is made?
@edpaq6305 ай бұрын
Where is the second video?
@officialcappo6 ай бұрын
woah thank u so much for ruining my scooter, the speaker no longer works. this really helped my scooter thanks!!
@shido6416 ай бұрын
What V belt is used on this machine? For the life of me I cannot find anything about it. My belt is so worn that I can't even see the number on it
@spartanx88466 ай бұрын
I love the idea to make a big front bumper preventing broken steering because front wheels shocking every now and them . Regular rc engineers (or bosses at factories) normally they dont think about this , normallly is an update for sand buggy or Land Rover 4X4 Style . WELL DONE GUYS !!
@georgedoganis67086 ай бұрын
I loved your instructions one of the best explanations on Utube and your use of vocabulary is awesome thank you
@JC-ud3vr7 ай бұрын
How come i keep getting error code on 2 different handlebars but my friend lend me gis and it works fine
@ionutvil18 ай бұрын
How you are able to charge two batteries which have two different BMS with only one charger?!…all I know is not recommended since each battery can charge differently
@ChristianHoffer-rk8wm8 ай бұрын
Works with the ES1LD ? its without bluetooth !
@user-zx4vk2dg5u8 ай бұрын
Hi I would like to know if this will fix an error 42 and also make my scooter pick up Bluetooth? It was used rental unit.
@MidnightWolfangАй бұрын
Mine was rental too, waiting for an answer
@PROFF4208 ай бұрын
Does anyone know if I can do this to my ninebot D38U if so could you send me a link and maybe give me a hand assisting me on this that would be great
@alextihonenko19 ай бұрын
mate i think you the only can answer. I'm pretty sure answer is here in the comments but I seems too stupid, so basic internal and external batterys aren't in parallel? But still I better not use a multiply external batteries after I discharged internal coz then they gonna need to repalance and explode (based on comments)?
@reedjacksonmaccom9 ай бұрын
excellent work
@stebanchavez772510 ай бұрын
Puedes explicar en el.ñ idioma español
@ronaldnalangan1110 ай бұрын
May i as out of topic why do my ninebot g30 scooter if i connected to Bluetooth segway apps suddenly anti theft alarm was activate it happen when i format my phone and I forget my previous account in ninebot apps.
@mackpower10 ай бұрын
hi frien, how can i install a battery that does not have singal wiring between the bms and the controller???
@omerrin11 ай бұрын
Hey I'm also messing with a 2.3.2 and did u find were to re solder the new dash wire in at ?ty
@omerrin11 ай бұрын
So hey I am trying to see if this is still possible on the snsc 2.3 Edition speed control rental Style and order new soldering positions going to be the same location?
@cassandrapendleton147411 ай бұрын
Great video, very helpful.
@marakiwyinager58111 ай бұрын
YOU ARE JUST LIKE READING A BOOK NOT LIKE EXPLAINING THINGS.....🥵
@dryoutubee Жыл бұрын
I have a question regarding other segway C15e ... I tried to lock it back or reset but not quite success..since there is no app for it !? Any idea how we can lock it ? Or reverse activation thx
@DjSergi01 Жыл бұрын
Can you show one with the Segway Ninebot F25e?
@carlobicchieri2667 Жыл бұрын
Hi I have a ninebot es4, wanting to add a 3rd battery, connecting everything with a Dual Battery Discharge Converter Connection Adapter Switcher. Would the scooter reach faster speed and stronger torque?
@22Valeriy Жыл бұрын
Hi friend. Thanks for the instructions. I did as you showed. Everything works except charging. the battery is not charged through the standard connector.
@adletnoah1898 Жыл бұрын
Hi! Can u do the same video for E series?
@LazarevDenisBalakovo Жыл бұрын
Hello, do it on 21700 batteries!
@TrippyFPV469 Жыл бұрын
6 years later and this vid literally saved the day. I've spent the last 2 weeks looking to fix this receiver glitch.. Even the great JB couldn't help me. You sir, are a fucking hero!
@Richard-ug4el Жыл бұрын
Great tutorial, but I don't umderstand why they would make it so complicated to change the controller? All the stupid fiddly stuff. Solder on a thing to flash it, change serials, etc, etc. It's just insane. Ever heard of plug and play? I'm honestly considering just throwing the old scooter in the bin.
@ThePhosee Жыл бұрын
Great video. I'm looking for the info how I can add a THIRD battery to ES4, but hasn't found anything yet. I think it is great way to extend the range by having third external battery, say in a backpack. Do you know anything about such thing, maybe you can make a video about it?
@carlobicchieri2667 Жыл бұрын
Hi, I wanting to do the same, did you have any progress? If positive please let me know how you did it
@box_e.commerce.markeking Жыл бұрын
Bravo excellent tuto
@jolleygreengiant6759 Жыл бұрын
There’s no need to take off the black plastic to install the green guard part
Пікірлер
Hello, I hope you are well, look, I am trying to do the programming but the ocd file is no longer available, the link is no longer available, I try with ocd files from the internet and I have no connection, what could I be doing wrong, I have already done it and everything is fine this time, I can't
what does it mean by wiring the 4 pins onto a dashboard?
What is the eBay site for the red dust collecter?
Me encantaria más por bluetooth
This is a great video! Instead of flashing all of these parts can you just purchase new or a kit? Thanks
wrap up the nail so its not exposed????? the whole transformer is the nail all joined together
ive a xiaomi365 controller and the board mosfets are healthy but i cant figure out why +5 and gnd are are shorted ....hint: there is an led pin on the board which goes to rear led indicator for brakes and etc which i shorted once accidentaly and it happend since then
Sl90 ninebot para instalar el stlinck v2 problemas. Con iot
I know it's been a while, but I have a scooter that can't turn the Bluetooth on, it seems to not reset or something, it was from those that Uber was auctioning... If I remove C15 to reset it and put it back, will it work?
Modelo ninebot sl90 flash
Geeat, thank you I ask you, if I want to use the same ninbot cotroller in my eBike, how to connect pedal assist wires in my controller?
just do it over BT.. is fien it wrk..
FK KERS! hard!
I call it steering column
Nice video. Where do you bought the pieces? Could you give the list? Thanks in advance
After I flashed my scooter I had an error 10 problem what should I do????? there is a program ???? can someone help me?????
Did you do video how add custom battery?
Link to contact you won't work?, where are you based as would love it if you could make mine go faster than 12mph?, many thanks
Alguien sabe como se hace para que mi patinete electrico bongo cicotec valla a 25 kh
Could you share the info on how the solenoid timing control work or is made?
Where is the second video?
woah thank u so much for ruining my scooter, the speaker no longer works. this really helped my scooter thanks!!
What V belt is used on this machine? For the life of me I cannot find anything about it. My belt is so worn that I can't even see the number on it
I love the idea to make a big front bumper preventing broken steering because front wheels shocking every now and them . Regular rc engineers (or bosses at factories) normally they dont think about this , normallly is an update for sand buggy or Land Rover 4X4 Style . WELL DONE GUYS !!
I loved your instructions one of the best explanations on Utube and your use of vocabulary is awesome thank you
How come i keep getting error code on 2 different handlebars but my friend lend me gis and it works fine
How you are able to charge two batteries which have two different BMS with only one charger?!…all I know is not recommended since each battery can charge differently
Works with the ES1LD ? its without bluetooth !
Hi I would like to know if this will fix an error 42 and also make my scooter pick up Bluetooth? It was used rental unit.
Mine was rental too, waiting for an answer
Does anyone know if I can do this to my ninebot D38U if so could you send me a link and maybe give me a hand assisting me on this that would be great
mate i think you the only can answer. I'm pretty sure answer is here in the comments but I seems too stupid, so basic internal and external batterys aren't in parallel? But still I better not use a multiply external batteries after I discharged internal coz then they gonna need to repalance and explode (based on comments)?
excellent work
Puedes explicar en el.ñ idioma español
May i as out of topic why do my ninebot g30 scooter if i connected to Bluetooth segway apps suddenly anti theft alarm was activate it happen when i format my phone and I forget my previous account in ninebot apps.
hi frien, how can i install a battery that does not have singal wiring between the bms and the controller???
Hey I'm also messing with a 2.3.2 and did u find were to re solder the new dash wire in at ?ty
So hey I am trying to see if this is still possible on the snsc 2.3 Edition speed control rental Style and order new soldering positions going to be the same location?
Great video, very helpful.
YOU ARE JUST LIKE READING A BOOK NOT LIKE EXPLAINING THINGS.....🥵
I have a question regarding other segway C15e ... I tried to lock it back or reset but not quite success..since there is no app for it !? Any idea how we can lock it ? Or reverse activation thx
Can you show one with the Segway Ninebot F25e?
Hi I have a ninebot es4, wanting to add a 3rd battery, connecting everything with a Dual Battery Discharge Converter Connection Adapter Switcher. Would the scooter reach faster speed and stronger torque?
Hi friend. Thanks for the instructions. I did as you showed. Everything works except charging. the battery is not charged through the standard connector.
Hi! Can u do the same video for E series?
Hello, do it on 21700 batteries!
6 years later and this vid literally saved the day. I've spent the last 2 weeks looking to fix this receiver glitch.. Even the great JB couldn't help me. You sir, are a fucking hero!
Great tutorial, but I don't umderstand why they would make it so complicated to change the controller? All the stupid fiddly stuff. Solder on a thing to flash it, change serials, etc, etc. It's just insane. Ever heard of plug and play? I'm honestly considering just throwing the old scooter in the bin.
Great video. I'm looking for the info how I can add a THIRD battery to ES4, but hasn't found anything yet. I think it is great way to extend the range by having third external battery, say in a backpack. Do you know anything about such thing, maybe you can make a video about it?
Hi, I wanting to do the same, did you have any progress? If positive please let me know how you did it
Bravo excellent tuto
There’s no need to take off the black plastic to install the green guard part