Пікірлер

• 
  @AMForouzani6 сағат бұрын

  what happens to the magnet holes when scaled , I assume they will not fit as before and we need to sand or glue them no ?

• 
  @SaturdayMorningProps6 сағат бұрын

  @@AMForouzani buy bigger or smaller magnets at 100% I like 7*2 mm at 102% I like 8*2mm

• 
  @AMForouzani6 сағат бұрын

  @@SaturdayMorningProps thanks

• 
  @kuggacouragegx609315 сағат бұрын

  9:26 also what did you used for the eyes this time????

• 
  @SaturdayMorningProps14 сағат бұрын

  @@kuggacouragegx6093 spastic opaque red, i love how its flat red but still see through

• 
  @kuggacouragegx609315 сағат бұрын

  🎉ngl. I was waiting for this but also surprised too. Great video also🎉

• 
  @SaturdayMorningProps15 сағат бұрын

  @@kuggacouragegx6093 gonna do a full tutorial probably this week

• 
  @kuggacouragegx609315 сағат бұрын

  ​@@SaturdayMorningPropsfantastic and perfect, can't wait

• 
  @Thadopeera16 сағат бұрын

  Any time you talk about selling your prints you open the door for all the for the panty boi’s saying you can’t do this and you can’t do that.. I say do you 💯 They don’t walk in your shoes and need to stfu..

• 
  @SaturdayMorningProps15 сағат бұрын

  @@Thadopeera I just let people do as they please, I tell people respect the modelers and for the ones that are afraid of Disney copyright just don't sell it if they aren't comfortable 🤷🏻

• 
  @EmilyChuu18 сағат бұрын

  So my first printer was a Nep4. To say it was as easy as pull out and print would be a bit of a lie. It took me a minute to really go through the machine and tighten bolts, adjust the Z axis etc. I switched from Cura to Prusa and learned how to tune profiles and I genuinely have been having a good experience with it! Its been running non stop varied prints for my DnD campaigns and its doing great. While the downs definitely made me feel overwhelmed, being able to troubleshoot the printer was a journey in itself and made me more confident with tinkering on printers. I am sorry youve had so many issues, maybe I got one built on a Wednesday? Lol. Good luck and wish you the best.

• 
  @SaturdayMorningProps18 сағат бұрын

  @@EmilyChuu very glad you got one of the good ones! 🙌 Are you doing big terrain pieces for your dnd stuff

• 
  @GerardLagana20 сағат бұрын

  When selling the helmets how do you instruct the buyer to size their head so that the helmet will fit their head?

• 
  @SaturdayMorningProps20 сағат бұрын

  my most popular video is how to size helmets, i usually send them that and it shows where i measure the head

• 
  @GerardLagana20 сағат бұрын

  @@SaturdayMorningProps ok cool, thx! Can you send me the link to your video? It would be much appreciated, thx!

• 
  @SaturdayMorningProps20 сағат бұрын

  @@GerardLagana just click my channel and it's the first one

• 
  @GerardLagana20 сағат бұрын

  @@SaturdayMorningProps awesome, thx!

• 
  @phoenyx556422 сағат бұрын

  the Reptar themed godzilla is genius! Love seeing people think outside the box

• 
  @SaturdayMorningProps22 сағат бұрын

  @@phoenyx5564 thanks thought it was a funny one

• 
  @Spatial_Computer23 сағат бұрын

  You don't have issues selling IP not licensed or owned?

• 
  @SaturdayMorningProps21 сағат бұрын

  @@Spatial_Computer I don't run an Etsy or website so I don't have any issues with that

• 
  @Spatial_Computer16 сағат бұрын

  @@SaturdayMorningProps you're not selling these then? I was led to believe that the video was The Best 3D Printed Helmets to Sell.

• 
  @SaturdayMorningProps15 сағат бұрын

  @@Spatial_Computer I just said I don't sell through a store like Etsy or a website. So I have zero issues with Disney finding a listing and trying to take down a store

• 
  @Lotus_Airsoft23 сағат бұрын

  Just FYI you can't sell the product from DO3d's files unless you buy their subscription service. The single files are for personal use only.

• 
  @seekertosecrets32 минут бұрын

  I was just thinking about that! Usually, it will be unethical to sell someone's file unless you get permission. It's better to make it yourself and then, you can sell it.

• 
  @mikek1618Күн бұрын

  Commercial licensing from the STL designer aside, wouldn’t you also need to have approval from Marvel / Disney to sell these?

• 
  @InfantrymyersКүн бұрын

  looking at Do3d, all of the licenses seem to be for personal use only

• 
  @GenesisMossКүн бұрын

  My issue with magnets. When you scale up a helmet the magnets don't touch anymore. You have a way around that by chance?

• 
  @SaturdayMorningPropsКүн бұрын

  @@GenesisMoss buy larger or smaller magnets, at 100% even though they say 8*2 I like 7*2 at 102% 8*2mm work perfect

• 
  @darrellhood5430Күн бұрын

  Love the beetleborg helmets

• 
  @SaturdayMorningPropsКүн бұрын

  @@darrellhood5430 red is on the way and a full tutorial for green

• 
  @ChazXКүн бұрын

  this is perfect im working on a custom OC design with a spike teeth like visor, but it red. Next the need a way for it to raise up and down but stay in the perfect spot when down Im trying magnets 1st time around

• 
  @Amastr200Күн бұрын

  So how long did it take if you speed run I wanna see what time you got

• 
  @SaturdayMorningPropsКүн бұрын

  @@Amastr200 the suit took me 4 months of work doing 6-8 hours days

• 
  @Amastr200Күн бұрын

  @@SaturdayMorningProps that is crazy mad respect to you, man👍

• 
  @d-mart3733Күн бұрын

  May you show your settings?

• 
  @SaturdayMorningPropsКүн бұрын

  @@d-mart3733 pretty much everything is default Bambu settings, 8% adaptive cubic infill

• 
  @laughingmantis33332 күн бұрын

  I wish this video gets much more attention. It's really helpful 💯

• 
  @SaturdayMorningProps2 күн бұрын

  @@laughingmantis3333 appreciate the compliment 🙏

• 
  @nb_cash2 күн бұрын

  Jingle All the Way may be my Christmas movie, but as far as Arnold Schwarzenegger movies in general are concerned, Terminator 2: Judgment Day is the GOAT!

• 
  @SaturdayMorningProps2 күн бұрын

  @@nb_cash definitely an epic movie for sure

• 
  @Beemer_ben2 күн бұрын

  Do you think you’d could do a video comparing the different selling platforms? Trying to get a 3d printing business off the ground but don’t know which platform is best 🤔

• 
  @SaturdayMorningProps2 күн бұрын

  @@Beemer_ben could be a good idea to do a pros and cons of each method like Etsy, Facebook, farmers markets

• 
  @918swimbikerun2 күн бұрын

  Can you share the link for the red again? The link above was for white when clicked the red link. Thank you for sharing this information!!

• 
  @SaturdayMorningProps2 күн бұрын

  @@918swimbikerun the red will be an option on the right hand side

• 
  @fumarworks54342 күн бұрын

  those do3d subscription service sucks

• 
  @sloshedmrbones2 күн бұрын

  Im having issues printing the deadpool helmet on a p1s. 1 support keeps failing. Can you show how you print yours?

• 
  @SaturdayMorningProps2 күн бұрын

  @@sloshedmrbones I definitely plan to do a video on it, in the mean time maybe switch to snug supports or use tree supports strong and glue stick the bed

• 
  @lucasrs022 күн бұрын

  I really want to buy a 3d printer just to print some helmets and status. But here in Brasil it's pretty expensive yet.

• 
  @SaturdayMorningProps2 күн бұрын

  @@lucasrs02 when I bought mine I bought it used on Facebook and I always made two of every helmet one to keep and one to sell

• 
  @Kaos101010012 күн бұрын

  Love do3d helmets print really good

• 
  @SaturdayMorningProps2 күн бұрын

  @@Kaos10101001 same and the textured ones are sooo easy

• 
  @eyal_the_goat2 күн бұрын

  but is it legal to sell the raw prints?

• 
  @SaturdayMorningProps2 күн бұрын

  @@eyal_the_goat yup read do3ds memberships and yoshs Patreon. Do the right thing and be courteous to the companies but overrall they are already infringing on copyrights that they don't have claim to like star wars and marvel. Never ok to sell their files but raw prints you are fine but again follow their guidelines

• 
  @davewhite162 күн бұрын

  @@SaturdayMorningProps this makes sense, because you're really selling filament, electricity & equipment use.

• 
  @camtron19672 күн бұрын

  If only it were that fast and easy 😂

• 
  @hansherrera69692 күн бұрын

  how much can u sell for

• 
  @SaturdayMorningProps2 күн бұрын

  @@hansherrera6969 all depends on your market, if you live in a lower income rural area will effect the price compared to a big city or capital.

• 
  @SaturdayMorningProps2 күн бұрын

  @@hansherrera6969 all depends on your market, if you live in a lower income rural area will effect the price compared to a big city or capital.

• 
  @hansherrera69692 күн бұрын

  on d03d cant add add 2 promo like u said or did i miss hear

• 
  @SaturdayMorningProps2 күн бұрын

  @@hansherrera6969 you misheard, if they are running a promo like 50% off SMP20 becomes that promo so instead of the normal 20 it bumps up, never said to add 2 promos

• 
  @hansherrera69692 күн бұрын

  @@SaturdayMorningProps thank u

• 
  @Rocketeer6572 күн бұрын

  Can you provide a link to the Vemon/Spider Man and the Godzilla helmets please, I can't find those and they look great. Thank you.

• 
  @SaturdayMorningProps2 күн бұрын

  yoshstudios on etsy or instagram!

• 
  @SaturdayMorningProps2 күн бұрын

  Do3d.com files 20% off code: SMP20

• 
  @tyleradams34902 күн бұрын

  Happy Saturday Morning, SMP! Great video. I’m curious about what you do with magnet holes if you scale up or down a helmet. I printed a Blue Beetle helmet for my 7yo son and there’s no way the magnets fit 😅

• 
  @SaturdayMorningProps2 күн бұрын

  You have to choose different magnets for different scaling. At 100% I like 7*2mm cause the 8*2 are too tight but at 102% 8*2mm are perfect.

• 
  @tyleradams34902 күн бұрын

  @@SaturdayMorningProps I bought magnets that were smaller but they were too deep still. So ill just have to buy different ones and hope for the best :) I debated boring the holes out but I don't want to mess it up. and heat fitting the magnets would probably deaden them. Thanks! And that's good to know for helmets I do for me and so on.

• 
  @SaturdayMorningProps2 күн бұрын

  @@tyleradams3490 ive seen people use screw or nail with the head the same size as there magnet and put that in a soldering iron to press new magnet holes. but i havent had to do that yet

• 
  @dnamesjackson85412 күн бұрын

  hey can you show a link explaining do3d license rules? i thought since it was personal you couldnt sell what you printed or did that only apply to the files themselves?

• 
  @SaturdayMorningProps2 күн бұрын

  If that is a concern for you go look at their membership section on their page . Gives you 2 helmets a month and are free to sell printed helmets.

• 
  @NikoBuilds3D2 күн бұрын

  @@SaturdayMorningPropscould I just sell them if I wanted or need the license?

• 
  @NikoBuilds3D2 күн бұрын

  For do3d,wireframe, etc

• 
  @SaturdayMorningProps2 күн бұрын

  @@NikoBuilds3D each designer has their own guide lines

• 
  @NikoBuilds3D2 күн бұрын

  @@SaturdayMorningPropsthank you

• 
  @supermomandj2 күн бұрын

  Do you try to get customer measurements? Or do you just sell the helmets at one constant size?

• 
  @SaturdayMorningProps2 күн бұрын

  Both, if you are selling at a farmers market or convention clearly you just make a generic one and if they want it they buy it, but I have also had people ask for personally sized as well

• 
  @supermomandj2 күн бұрын

  @@SaturdayMorningProps Do you have a size you default to, or is your default just whatever the helmet imports as?

• 
  @SaturdayMorningProps2 күн бұрын

  @@supermomandj I print them scales toy head normally, I have a very generic head so most fit me at 100% but some I scale to 102%

• 
  @Kryoutubeartist4 күн бұрын

  3d builder no longer exists

• 
  @SaturdayMorningProps4 күн бұрын

  @@Kryoutubeartist haven't upgraded to windows 11 so I didn't realize, concepts should still work in the slicer of your choice

• 
  @Kryoutubeartist4 күн бұрын

  @SaturdayMorningProps any tips on a decent slicer that uses the x ray function? I'm using bambu slicer and can't seem to find an option, would meshmixer work?

• 
  @SaturdayMorningProps4 күн бұрын

  @@Kryoutubeartist meshmixer would be my next guess as well but if you watch my first sizing video I used to do it in cura without the xray

• 
  @zachhalliwell5534 күн бұрын

  Do you ever notice issues with the rivers pulling through the hole? I used the same riverts and drilled a hole that was their size (3/32) but a couple of them pulled right through when I clamped the hand riveter down. Other ones also spilt the plastic when they clamped tight. Nothing a little bondo can’t fix but curious if you ran into that?

• 
  @SaturdayMorningProps4 күн бұрын

  @@zachhalliwell553 I haven't had any issues but I've seen some people worried about cracking, make sure you have the rivet as pushed in as possible before squeezing the handle. Also have heard the suggestion of using a washer on the opposite side but have never needed that.

• 
  @zachhalliwell5534 күн бұрын

  @@SaturdayMorningProps mmm a washer might be a good idea. I did have them pushed as far in as possible but they still pulled through a bit, probably because the plastic can’t stand up to the pressure of the metal. So a washer would be a good idea. I think the cracks are okay, it didn’t spit more than an inch so I just filled it with some super glue and I’ll cover it with bondo and give it another sanding and it should be good.

• 
  @SaturdayMorningProps4 күн бұрын

  @@zachhalliwell553 try maybe a size smaller drill bit, I haven't had them pull back out ever, what infill and walls do you run your prints?

• 
  @zachhalliwell5534 күн бұрын

  @@SaturdayMorningProps that was my next thought, unfortunately I’m missing whichever bit is slightly smaller than 3/32 haha. But maybe I’ll go pick one up. I’m using 3 walls and gyroid infill at 5%, which doesn’t sound like a lot but there’s still a lot of structure in there and they’re really strong otherwise.

• 
  @SaturdayMorningProps4 күн бұрын

  @@zachhalliwell553 3 walls is good I usually print at 8% but I highly doubt the 3% is why we are having different results

• 
  @tombo77195 күн бұрын

  I DID back the giga. I am guessing I will have to shit can the OS and figure out a solid FULL bed, get a sheet for entire surface instead of the separate beds, and install auto leveling of some type.

• 
  @SaturdayMorningProps5 күн бұрын

  @@tombo7719 I'll be rooting for you 🙏 hope they get it all worked out before you get one

• 
  @tombo77195 күн бұрын

  @@SaturdayMorningProps thanks! I am checking to see if I can cancel, but I think it has been sent already. If so, I will get it working, and just use the hardware w/ all the right stuff added. Hardware its pretty dope, but what I am hearing.. that it might not be worth the cost as is. Meh.. even if nothing else, I would be a HELL of a platform to put multiple tool heads on. We will see. thanks man, appreciate the video

• 
  @prerecordedresponse98846 күн бұрын

  Everything I see about bed slingers above 300mm is just depressing. I really need a 400-500mm build plate but they're either too expensive or they're a bed slinger that can't be trusted to print that big reliably. Any hope Bamboo makes a 400+mm core x/y soon?

• 
  @Majin_Artist7 күн бұрын

  Cool

• 
  @MissJettii7 күн бұрын

  Thanks for this!!!!

• 
  @SaturdayMorningProps7 күн бұрын

  Of course, 9 times out of 10 there is a video that can help the questions on the 3d printing advice section

• 
  @levipatton92077 күн бұрын

  I cant download 3d builder on my PC. it isn't giving me the "get" button. Anyone know why?

• 
  @SaturdayMorningProps7 күн бұрын

  Check if it may have been naturally installed?

• 
  @levipatton92077 күн бұрын

  @@SaturdayMorningProps it has not been installed naturally. seems to be an issue others are having as well.

• 
  @SaturdayMorningProps7 күн бұрын

  @@levipatton9207 hmm I wonder if it stops at windows 10

• 
  @levipatton92077 күн бұрын

  @@SaturdayMorningProps I'm attempting to research now on the topic. I hope not!

• 
  @levipatton92077 күн бұрын

  @@SaturdayMorningProps I'm also running windows 11

• 
  @zachhalliwell5537 күн бұрын

  Also, did you just spray paint the buckles after you had them mounted and were spraying the whole helmet? Or did you find it would have been easier to paint the buckles first and then mount them? It seems like it might be hard to get all of the sides of the buckle while it's on the helmet and keep the paint from running.

• 
  @SaturdayMorningProps7 күн бұрын

  I show in my build videos that I put them on before primer stage. It's not hard to get them covered and often I spray multiple light coats I don't try to cover everything at one timen

• 
  @zachhalliwell5537 күн бұрын

  @@SaturdayMorningProps nice cool thanks!

• 
  @brentcox62019 күн бұрын

  always wanted to make Dumbledore's podium with the big owl and put it in my home theater, but want to make this broom too

• 
  @SaturdayMorningProps8 күн бұрын

  I have a buddy who made one of those!

• 
  @SynysterGoose10 күн бұрын

  I wish these would fit in a p1s lol

• 
  @SaturdayMorningProps10 күн бұрын

  My buddy did all 3 in his p1s

• 
  @SynysterGoose10 күн бұрын

  @@SaturdayMorningProps how many cuts?

• 
  @SaturdayMorningProps10 күн бұрын

  @@SynysterGoose he has a small head but he did the red helmet whole and the green is front back and horns

• 
  @SynysterGoose10 күн бұрын

  @@SaturdayMorningProps 🤔

• 
  @phoenyx556410 күн бұрын

  This looks incredible dude! great work as always :)

• 
  @SaturdayMorningProps10 күн бұрын

  Thanks, pretty happy with it

• 
  @ejlang864511 күн бұрын

  Would love to see a Lord Drakken build

• 
  @SaturdayMorningProps10 күн бұрын

  That's a mean looking suit for sure, got a huge backlog of helmets to do

• 
  @jrmh09611 күн бұрын

  Hi, just wanted to say this is helpful that you showed the process, especially the cura slicing. Most of all i feel this video is genuine and thorough (not filled with sometimes too much video special effects), you explained everything in detail, audience know every product you used. 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

• 
  @SaturdayMorningProps11 күн бұрын

  Happy to help, thank you for the kind words

• 
  @Vandius2411 күн бұрын

  Where are the files needed for this located?

• 
  @SaturdayMorningProps11 күн бұрын

  I would use do3d.com files they updated them and are the best bang for the buck use code smp20, the mala's files were found out to be stolen

• 
  @papadog7911 күн бұрын

  TYSM BRO YOU SAVE ME

• 
  @zachhalliwell55311 күн бұрын

  Can you go into more detail on how you do the elastic for the top hinge? You mention it but I don't really get how you do it or how it works, you didn't even really show it. Do you pull it tight and glue it down? How much do you use?

• 
  @SaturdayMorningProps11 күн бұрын

  Check a few earlier videos if you need to see it better, no I do not pull it tight the goal is for it to be able to stretch to open. I barely use any, just two pieces hot glued to both sides at the top. It's not easy to film since you do it with the helmet closed so you can't see it happening anyway

• 
  @zachhalliwell55311 күн бұрын

  Do you have a tutorial for how you do the hinge at the top. That's the piece I just can't figure out the best way to do.