newbie here - I wouldn't have clicked your video if your channel name was Quest4Nostalgia... that doesn't tell me what you do. SaturdayMorningProps tells me exactly what I should expect and I'm totally down for it :D

@SaturdayMorningProps

3 ай бұрын

Well I'm glad I changed it then 🤘 welcome to the channel

Dude, thanks for this video! It’s exactly what i was looking for 🎉

@SaturdayMorningProps

2 ай бұрын

Happy to help! It was my biggest concern when buying a p1s

Awesome take on what can be achieved with a smaller build volume printer!

@SaturdayMorningProps

3 ай бұрын

You were a huge factor in me choosing the p1s!

This video randomly popped up, I looked at your head scaling video a while back but never subbed, subbing rn. Your content looks AMAZING

@SaturdayMorningProps

3 ай бұрын

Jacob I truly appreciate that 🙏🙌

I liked the Quest4Nostalgia, I thought it was good. I saw where the name was going, hindsight and all plus nostalgia, but SMP rings really well. That's basically why I got into 3d printing, for saturday morning props/ toys I didn't have as a kid.

@SaturdayMorningProps

3 ай бұрын

Thank you for sharing that with me and happy to still have you around 🤘

I was pretty torn between the K1Max and the P1S for the same reasons and I also ended up getting the P1S. Currently it's printing out pieces for my Halo Mk V[B] suit and this printer has been leagues better than my Anycubic I3 Mega and CR-6se and not to mention the AMS system has been great for swapping rolls as I run out.

@SaturdayMorningProps

3 ай бұрын

I almost got the ams for that reason to have no waste but I couldn't get myself to pay that for it

I know it can, just that orientation is important as is sizing, and do one half at a time.

I had the exact same thought debate with myself, K1 Max or P1S. Ended up with the P1S with AMS on sale, was about the same as the K1 Max pricewise. While I do regret it not being big enough to print a Clone Trooper helmet I AM stoked about the quality and ease of use. Coming from a Neptune 3 Pro and always fixing something or changing settings every other print. With the Bambu I load the file into the slice (Orca) send the file and print from my PC. Never have to check and if I want to I can do it from the slicer or the app on my phone. If you have the money or can get it cheap I say go for it. Might go Neptune 3 Max or K1 Max later on if I get into hardcore cosplaying or selling armor.

@SaturdayMorningProps

21 күн бұрын

I now have a k1 max and P1S and still choose to print on the bambu more

When you cut the files into different parts, how do you hide the gaps after gluing/welding them together? Would the Bondo glazing putty be good for that?

@SaturdayMorningProps

3 ай бұрын

Yup depending on how big the seam, can use spot putty or real bondo

Any chance you could share your support settings and print orientation on the bambu specifically. I've been trying to print ranger helmets from DO3d and Wicked on a p1p but the supports are crazy on them. Do you think the details on white ranger helmet needs supports from the inside? (the forehead patterns)

@SaturdayMorningProps

3 ай бұрын

I'll try and make a video on it 🤘 I prefer snug supports on the p1p and paint them on usually

After you are done rotating simply press right click and select “center”. This brings your helmet in the middle of the build plate so you dont have to manually move left and right.

@SaturdayMorningProps

29 күн бұрын

Great tip

If your head is small enough, or you cut it into parts yes! I print helmet parts on it but most on my Neptune 4 Max or K1 Max

I have an Ender 3, a Neptune 3 Plus and a P1S. I haven't used the Ender or Neptune in months because the quality of the P1S is far superior. Just need Bambu to make a bigger version

@SaturdayMorningProps

3 ай бұрын

That's the dream!

Searched for a video for sizing the ranger helmet, found your page. "All but the Green Ranger". Guess which one I am trying to print.... lol

@SaturdayMorningProps

3 ай бұрын

So depending on your headsize it may be possible to fit on the bambu, but would probably be best to split the top from the bottom

would it be possible to share some of your support settings? thanks again!

@SaturdayMorningProps

3 ай бұрын

For the p1s I like to do snug supports and I often do manual painting, if it has hard to reach areas I do the hybrid tree supports

Bambu is killing it in the printer game right now, glad to see you got something to treat you right unlike those *cough* elegoos *cough*

@SaturdayMorningProps

3 ай бұрын

Has your k1 been treating you well?

@anthonylong5870

3 ай бұрын

Bambu is all just hype. Trust me i own one. Theres nothing impressive about Bambu. Other companies have caught up and surpassed them in value and features for less money

@Grunttamer

23 күн бұрын

@@anthonylong5870 false. I also own one

You’re gonna make me switch to Bambu 😂😂

@SaturdayMorningProps

3 ай бұрын

It has been a great printer, I'm a cheapskate and usually only buy used printers but really glad I got this

I have the P1P. Worth every penny.

@SaturdayMorningProps

3 ай бұрын

I would've done the p1p but they were back ordered for a month

@ChueKhang001

3 ай бұрын

@@SaturdayMorningProps p1p is just the naked version of p1s.

@SaturdayMorningProps

3 ай бұрын

@@ChueKhang001 yeah I know I would've bought that and saved 100 bucks but they were back ordered for a month so I had to get the p1s

@ChueKhang001

3 ай бұрын

@@SaturdayMorningProps it's still a great buy. I would have bought P1S too. Next is the AMS.

Nice job. I’d be cool if you made the viper pilot helmet from the latest Battlestar Galactica.

@SaturdayMorningProps

3 ай бұрын

That's an epic looking helmet

Yeah team Bambu FTW 🤣🤣

Answering the real question!

@SaturdayMorningProps

3 ай бұрын

Thanks for your help on pushing me to get one

You should have gotten the Qidi Q1 Pro. Its better than the Bambu in almost everything. And its $200 less (I own a P1S btw)

For those 103% ones how did you tackle the magnet size issue?

@SaturdayMorningProps

3 ай бұрын

Do3d and yosh seem to both use around a 8*2mm magnet, do3d at 100% often are too tight for those and I have to end up using my soldering iron to expand the hole, at 103% they still work fine with just super glue

@kevinkemarly5283

3 ай бұрын

Awesome! Yay for accidental tolerance!

"I have a very average head" 😂

@SaturdayMorningProps

3 ай бұрын

I'm literally the old navy mannequin