Пікірлер

• 
  @MrTonymead1239 күн бұрын

  I know this is a old video but do you have the files for this please dxf

• 
  @dennisvanhoof99589 күн бұрын

  I'm sorry, but I only share files of the projects I have made available as DIY projects. I have a simple 2D project for beginners here: topoarts.com/carve-your-own-butterfly-with-the-cnc-router/ And a slightly more complicated 3D project for intermediate CNC users here: topoarts.com/carve-a-3d-heart-shaped-box/ And a more complex project for advanced CNC users here: topoarts.com/carve-your-own-sea-shell-box-with-the-shapeoko/

• 
  @mdhadliner2419 күн бұрын

  درود بر تو دنیس عزیز❤ فکر نمیکردم بابت این کار زیبا اینقدر با شما مخالفت شود🤦🏻‍♂️متاسفم بابت ذهن های خشک و جامد از پیش قالبگیری شده تمام هیتر ها

• 
  @thirumalaiwoodworks9881Ай бұрын

  Sir i need software

• 
  @HappyTailsSupportАй бұрын

  You are not a woodworker...you are a Woodgineertist! I saw your koi vid where you made the rotary table. Amazing. You set the CNC bar just high enough for the rest of us to bump our heads, lol.

• 
  @HappyTailsSupportАй бұрын

  That's Wood Engineer Artist for any that can't figure it out.

• 
  @soltesznagytamasАй бұрын

  😃👏👍

• 
  @soltesznagytamasАй бұрын

  ❤👏👏👏👏👍

• 
  @danielbarbieri8199Ай бұрын

  A violin is not furniture...

• 
  @user-wu8kk6uk6v2 ай бұрын

  لك كل الشكر والتقدير على صناعة الكمان الرائعه المتميزه وكل عام وانتم بخير وسعاده

• 
  @user-wu8kk6uk6v2 ай бұрын

  السلام عليكم ورحمة الله وبركاته كل عام وانتم بخير والعالم كله بخير وسعاده الله ينور عليك على الصناعات الرائعه شكرا جزيلا

• 
  @TemplastaT2 ай бұрын

  Impressive 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

• 
  @mohamedshuaib48772 ай бұрын

  Form where you downloaded the 3d model that you mentioned at the beginning of the video, would you please share the model link ??

• 
  @dennisvanhoof99582 ай бұрын

  I downloaded several from CGtrader and Sketchfab, and then created my own using the following website as guidance: www.makingtheviolin.com/

• 
  @mohamedshuaib48772 ай бұрын

  @@dennisvanhoof9958 Thank you for your support I downloaded the strad model and I will start the process with my CNC

• 
  @mohamedshuaib48772 ай бұрын

  II think its difficult to cut the ribs with 1.2 mm thickness because the tool vibration may crack the material so, What's the rib thickness that you used in this video?

• 
  @dennisvanhoof99582 ай бұрын

  About 2.0 mm.

• 
  @mohamedshuaib48772 ай бұрын

  From where I can get an accurate violin design ??

• 
  @dennisvanhoof99582 ай бұрын

  www.makingtheviolin.com

• 
  @tomisss32 ай бұрын

  Beautiful work! 👍

• 
  @aryaprincess24792 ай бұрын

  You are adorable.

• 
  @user-wu8kk6uk6v2 ай бұрын

  شكرا جزيلا على الصناعه الرائعه وكل عام وانتم بخير والعالم كله بخير

• 
  @user-wu8kk6uk6v2 ай бұрын

  السلام عليكم ورحمة الله وبركاته كل عام وانتم بخير والعالم. كله.بخير انت رائع ومتميز

• 
  @adam-usa3 ай бұрын

  Very, very, very beautiful!

• 
  @philoara56473 ай бұрын

  Brillant ❤ J’adore !!!!

• 
  @philoara56473 ай бұрын

  Super !!!❤❤❤

• 
  @hz37013 ай бұрын

  Wow

• 
  @amezcuaist3 ай бұрын

  Dennis is so competent at all this technology and also the violin fitting that I was amazed ,at the end,that he could not play his work of art . Admirable work but also slightly disgraceful if you follow me .I deeply resent a violin glued permanently though . But I glued on the neck on my first violin with Araldite . I just made sure never to drop it .

• 
  @tanthaip.52513 ай бұрын

  OMG Incredible

• 
  @alvanjudson28364 ай бұрын

  Brilliant, Dennis. I'm afraid that if I'd tried to do that on my CNC machine that I'd have gone through a whole olive grove of wood and failed miserably. Yours is an excellent example of human "application".

• 
  @circuscorps4 ай бұрын

  This is brilliant, and super helpful! Thank you!

• 
  @johninserra50464 ай бұрын

  Wow you are a sharp guy. Subbed!

• 
  @geraldhaller99064 ай бұрын

  Wow ! Ich liebe Oliven Holz ! Habe meine DIY Lautsprecher mit Olivenholz Furnier furniert , gemein in der Verarbeitung super schön in der Optik . Habe jedesmal geflucht wie ein Rohrspatz weil das 0,6mm dünne Furnier extrem spröde war und sehr leicht brechen konnte zumal ich nur mit sehr einfachen Werkzeugen Ausgestattet bin . Akku Stichsäge Akku Bohrer ansonsten nur Handwerkzeuge wie Kuttermesser Laubsäge Holzhammer Spanngurte etc . Reicht aber um Lautsprecher zu bauen die MDF platten lasse ich mir im Baumarkt zusägen und wenn etwas unter 10cm sein muss dann Online da geht es bis 5cm runter . Von den Geigen bin ich zutiefst beeindruckt und mir scheint sie klingt sehr gut so zumindest mein Eindruck über meine Lautsprecher .

• 
  @jhynof.todlcruz46654 ай бұрын

  WAAAUUU impresionante amigo, quedo genial!!!

• 
  @ethanhinkle53694 ай бұрын

  Please make some more videos soon!! I loved all of your projects!

• 
  @dennisvanhoof99584 ай бұрын

  Thank you for your kind words! Unfortunately, my current job and family obligations leave me very little time to do any woodworking at all. I hope to get back to it again, once things have settled down.

• 
  @komalavathyv32654 ай бұрын

  I am learning to play violin 🎻. I like ur video

• 
  @qizang13204 ай бұрын

  so beautiful! you're gorgeous!

• 
  @terryvanbrug4 ай бұрын

  Very cool, I was wondering how far we could get milling 4 sides using VCarve, this was the answer I needed 👍

• 
  @dendywirawansaputra93534 ай бұрын

  That’s some serious bike you ride, loved it. And the xenomorph is absolutely stunning!!!

• 
  @dboboc4 ай бұрын

  Making anything with a cnc can hard be considered art.

• 
  @mouradbelkas5984 ай бұрын

  Thank you.. that's beautiful violon. Do you make some for selling? I need to buy one for my daughter!!

• 
  @donochetti21775 ай бұрын

  Thank you! I made this, it was such a fun project and looks amazing!!!

• 
  @simonhawker92775 ай бұрын

  WHAT DOES IT SOUND LIKE thats how you judge a violin, it sounded great,

• 
  @tonynightingale44005 ай бұрын

  Absolutely beautifully hand crafted piece of art .

• 
  @andymachala9995 ай бұрын

  I have been thinking about investing polymer into the wood. Put the wood in a vacuum chamber with plastic solution or possibly epoxy resin, pull vacuum on the chamber to pull the air out of the wood, then apply pressure to suck the resin into the wood. Then the wood would be fully impregnated with resin so there would be no voids thus making it very stiff.

• 
  @roseericson38285 ай бұрын

  But can you do it by hand without the computerized machine. I bet not. 😢

• 
  @MarsG0Dofw4r_5 ай бұрын

  Olive the best to you sir!😊

• 
  @calebdillman84625 ай бұрын

  Olive wood is gorgeous without colored stain. Good call with just clear varnish.

• 
  @arturslunga42265 ай бұрын

  Great video and I like your approach to violin building, no point in doing what everybody else is doing

• 
  @cyclonico5 ай бұрын

  I would add a resistor in series with the LEDs. LEDs and batteries have a small resistance, so the current is probably really high, and the battery won't last long.

• 
  @etniopaltrebor5 ай бұрын

  Wow ! merveilleux

• 
  @nikolaoskoulouriotis74035 ай бұрын

  Friend awsome video.but can i.explain something.yes a cnc machine is ok .but by hand.is unreal.

• 
  @christianklein57745 ай бұрын

  I had that idea alsobut might time when im in pension , over 4qm meter olive wood in divrebd blocks from framwork , i woud 1 scaned an tradional expensiv violin that is known as well, and used some finsh i kown from the carpents around paraphin tepentin rabit clue , (ther is somfing with amoniak i woud taste ) nut&oliv oilfinish/polish. ..

• 
  @hannovor5 ай бұрын

  awesome👍👍👏👏

• 
  @lesley-annmathews79715 ай бұрын

  Wow not bad sound at all! Would want to hear the 4 instruments seperately and together! Any chances of video??🎉

• 
  @willy655915 ай бұрын

  Bonito, y el precio? los vende? 🤔