JD Archer

JD Archer

I have been a wrench head for years. I started off with building a 69 Camaro, then moved on to Miatas, followed by my first turbo car a 97 Eclipse GSX. After than I moved on to a Honda S2000, then my first MKIV Supra, then a 2010 Camaro, FD RX-7, R32 Nissan Skyline GT-R and my second Supra. I am now the owner of a 2013 Nissan GT-R Black Edition. I love JDM cars and would like to share that enthusiasm with all of you. I will be do car reviews, how to videos and opinions based on personal experience with those legendary JDM tuner cars. I tend to do almost all of the work on the car my self. This comes from a budgetary need as well as a lack of trust of mechanics in general. Working on cars are not has hard as people think, and I hope to show you that you can do it as well, regardless of your experience.

You can follow me on:
Instagram: j_d_archer
Twitter: @jd_archer
Or I have a facebook page: facebook.com/JDArcherVlog

NissFest 2023

NissFest 2023

A DAY AT NISSFEST 2022

A DAY AT NISSFEST 2022

WEKFEAST LOS ANGELES

WEKFEAST LOS ANGELES

GTR DAY AT SUPERCAR SUNDAY

GTR DAY AT SUPERCAR SUNDAY

Пікірлер

  • @FPS_SPARK
    @FPS_SPARK10 күн бұрын

    知っている人しか価値を知らない

  • @HarrProductionz
    @HarrProductionz16 күн бұрын

    I’m 3+ years late but how does it feel owning an r35??

  • @JDArcher
    @JDArcher16 күн бұрын

    Good for the most part. I only have 2 real complaints 1) the seats sit to high and 2) the car is just a little big. I wish it was about 4 in smaller all around

  • @rmnd2102
    @rmnd210224 күн бұрын

    I started watching this dude because I got curious on how he goes about doing diy on his gtr. Cause gtr is my dream car and as I watch he reignited the fire in me to pursue my dream car. Kudos to you man 👍 you have a new subscriber

  • @JDArcher
    @JDArcher24 күн бұрын

    Awesome. Thank you and welcome

  • @AngelFromHell909
    @AngelFromHell90925 күн бұрын

    A stock wing would ben good nice gtr tho

  • @JDArcher
    @JDArcher25 күн бұрын

    Had one. This is a black edition. I decided to swap it out

  • @jordangordon2350
    @jordangordon235025 күн бұрын

    thinks the s2000 is slow but likes miatas...

  • @JDArcher
    @JDArcher25 күн бұрын

    Yes, because I've actually owned both. When it comes to the twisties, the S2K doesn't stand a chance against a NA or NB Miata. I even remember when I had the S2K I did a coastal run with a S2K club. Two Miatas showed up and the S2K owners could figure out why they could keep up with those little Mazdas in the twisty forest road.

  • @silver33vspec
    @silver33vspec26 күн бұрын

    Japan drives on the left because of the samurai. It was dishonourable to touch swords when walking beside each other. To stop that, you walked on the left side to avoid being cut down by a sword.

  • @reconjulicraft8351
    @reconjulicraft8351Ай бұрын

    How can I buy a Pagani Utopia with a normal job?

  • @jeremywillis7407
    @jeremywillis7407Ай бұрын

    No disrespect, building these cars are fun but you have to know what to look for. Even then finding these parts are no easy task. That being said.. These parts are incorrect. Lettys car didn't have Kouki bumpers etc.. It did have JDM S14 style headlights but the body kit used was made by Zeal. Unfortunately no longer in production. The side skirts are available but front and rear bumpers are near to impossible to find. Also the wheels are wrong. They're Yokohama Advan AVS Model 5 18" wheels. You do however have the rarest part... The Vis GT wing. If you need help finding parts let me know I'd be glad to help.

  • @SawmRad
    @SawmRadАй бұрын

    Great vid, definitely no music next time. REALLY distracting from an informative video.

  • @JDArcher
    @JDArcherАй бұрын

    Copy that

  • @arjunnattyala7948
    @arjunnattyala7948Ай бұрын

    😢😭

  • @mickc7939
    @mickc7939Ай бұрын

    Awesome video ❤ great detail

  • @JDArcher
    @JDArcherАй бұрын

    Awesome, glad you enjoyed it

  • @thoughts03class21
    @thoughts03class21Ай бұрын

    Let him cook

  • @user-yn8mf3li9q
    @user-yn8mf3li9qАй бұрын

    Hi 👋😊

  • @JDArcher
    @JDArcherАй бұрын

    Hello

  • @Twobarpsi
    @TwobarpsiАй бұрын

    Sucks they still didn't get it right.

  • @Twobarpsi
    @TwobarpsiАй бұрын

    Go with DJI Action Cameras. They never fail. GoPro sucks!

  • @JDArcher
    @JDArcherАй бұрын

    ​@Twobarpsi good to know, thanks, I'll make the swap over when I can

  • @Herblenny
    @HerblennyАй бұрын

    That sucks. But good to know. My thoughts is that all these guys lie about where their stuff is made and likely all made somewhere in china. I talked to my friend at Nissan about the r35 nismo and he said the nismo carbon parts are made by the company that makes the GT race cars. If I have to make a guess why these might not fit is that the nismo carbon trunk might be different shape. I might be seeing the couple of older nismo GTR’s at Nissan headquarters in July. I’ll check.

  • @JDArcher
    @JDArcherАй бұрын

    ​@Herblenny I've seen a few Nismo GTRs and took close up pics to sent to CT Carbon. The trunks are the same shape, just nismo is made of CF. To get a Nismo wing from Nissan if about $14k

  • @cb8491
    @cb8491Ай бұрын

    How f@cking annoying!

  • @mm8436
    @mm8436Ай бұрын

    So this is why you went to an APR GT 500 lol

  • @JDArcher
    @JDArcherАй бұрын

    Yup. I just don't like being lied to. Granted I could have just run without the center piece, but I paid for it and I want the wing to be complete

  • @WEAPONZ3RO
    @WEAPONZ3ROАй бұрын

    Just made me a little more confident on owning my dream car in the future. Seeing alot of threads and comments on maintenance for this beast really kills the mood to buying one, but after watching this video i can't wait! Thank you for the info bro🤙🏽

  • @JDArcher
    @JDArcherАй бұрын

    Glad i could help. You should also check out my video on cost of maintenance. That might help also

  • @jokeer14
    @jokeer14Ай бұрын

    Thanks, exactly what I was looking for, except for the music

  • @JDArcher
    @JDArcherАй бұрын

    Awesome

  • @BuiltNutritionFitness
    @BuiltNutritionFitnessАй бұрын

    Thank you for making this video so we can show this to our wives who are skeptical 😂😂

  • @JDArcher
    @JDArcherАй бұрын

    That's what I made it for :)

  • @SuperDarkLord7
    @SuperDarkLord7Ай бұрын

    There's a new one now

  • @JDArcher
    @JDArcherАй бұрын

    Yup, but not when this video was made

  • @SuperDarkLord7
    @SuperDarkLord7Ай бұрын

    @JDArcher True enough But it's like a modernized version of the DBA. Personally did not like the EBA but this new one is pretty nice. The DBA was my preference up to now.

  • @6p1n
    @6p1nАй бұрын

    CBA is the best looking by far

  • @AdolfoMartinez-ye8ft
    @AdolfoMartinez-ye8ftАй бұрын

    The EBA also has a diferent transmission i have a 2021 and a 2020- has transmission filter so the design is diferent

  • @abdalrahmanal-sabbagh3906
    @abdalrahmanal-sabbagh3906Ай бұрын

    What iam doing here???? i have an exam tomorrow and literally i have a 25$ in my bank and it is 2 AM 😢

  • @AnekoGT
    @AnekoGTАй бұрын

    Just don't get a GTR, it's the same 2007 car.

  • @JDArcher
    @JDArcherАй бұрын

    Kind of yes, kind of no

  • @chadoshley8471
    @chadoshley8471Ай бұрын

    Only if it was a truck cute for my wife though

  • @JDArcher
    @JDArcherАй бұрын

    Hu?

  • @JosePerez-ws3xg
    @JosePerez-ws3xgАй бұрын

    👍🤙

  • @drawing4kids781
    @drawing4kids781Ай бұрын

    I hate it when there is a big ass diggy and no space to sit at the back , u can also need back seats as diggy so siggy should be small and they should instead make the seating comfortable

  • @thaitanium35
    @thaitanium35Ай бұрын

    Another great instructional video!! Darwinpro is also a very good vendor (as mentioned in this video). I ordered 17' Nismo front bumper from them before. Almost perfect fit (only a bit of adjustment to make by the body shop. No sanding, cutting, or anything crazy like that). The carbon fiber is of great quality. The only thing that sucks is the wait time. Darwinpro makes product inhouse, so it takes a bit of waiting once you placed the order. However, that just mean that they (probably) don't just send you cheap parts from other Chinese vendors like alibaba etc.

  • @ronaldjensen9919
    @ronaldjensen9919Ай бұрын

    Turns out, EBA is actually called 4BA.

  • @fitz7694
    @fitz76942 ай бұрын

    i feel like reading a cheat sheet before buying the r35 with this video.very good info to know.

  • @JDArcher
    @JDArcher2 ай бұрын

    Glad I could help. I also have a video on what to look at when buying a R35

  • @JDArcher
    @JDArcher2 ай бұрын

    Glad I could help. I also made a video show everything you should check when buying a R35 also

  • @mypalAbra
    @mypalAbra2 ай бұрын

    Would a 2017 bumper swap over? Any reason you didn’t go that route?

  • @JDArcher
    @JDArcher2 ай бұрын

    Not directly. The hood would have to be swapped and there is some ducting for the oil cooler has to be modified. I personally don't like the 2017 + bumpers. The 2012 to 2016 look way better

  • @jamesnoz
    @jamesnoz2 ай бұрын

    Looking to buy an r35. Massive thanks for this. Insane amount of info in a short video. Well presented. Thanks brother 🇬🇧

  • @JDArcher
    @JDArcher2 ай бұрын

    Glad I could help and welcome to the club

  • @thaitanium35
    @thaitanium352 ай бұрын

    The instructions are good. I just wish that you’d move the camera closer to certain thing you’re speaking of. For example, when you calibrate the e brake, talking about clicking and rotating, it was difficult to follow along since I don’t know what I’m looking at.

  • @JDArcher
    @JDArcher2 ай бұрын

    You know, I was thinking about that just the other day. The hard part about that is I am sometimes racing the clock. This 30 minute video was shot over a 12 hour day. Sometimes I'm racing the sun and an trying to make sure the project gets done. But you are right, after getting home and editing, inevitably I find a few places where I wish I had put the camera in a better spot or grabbed a cut away. I will try to do that more in future videos

  • @thaitanium35
    @thaitanium35Ай бұрын

    @@JDArcher I might have come off a bit harsh in my previous comment, but I did not mean it that way at all. I do appreciate you taking the time to make the video. I'm just speaking from a newbie point of view, since I have no experience working with e-brake. When you were explaining, I was hoping to be able to see what it was that you were speaking of. Overall, it still is a great instructional video. The good thing was the e-brake set up was straight forward. I was able to figure it out (guessing what I was doing) based on your instruction. Keep up the good work!!

  • @JDArcher
    @JDArcherАй бұрын

    ​@thaitanium9025 no insult taken at all. I was actually agreeing with you. I was littlerally thinking about it the other day. I needed more close ups of what I'm doing. The hard part is once I get moving on getting the job done I'm usually racing a clock. I could use a second camera, but I'm using GoPro and the batteries seems to not last long and the camera constantly glitches.

  • @garyalcorn3831
    @garyalcorn38312 ай бұрын

    I have same wing do you find it shakes like mad the full wing when doing high speeds? Is so annoying like is going to come off is solid fixed aswell

  • @JDArcher
    @JDArcher2 ай бұрын

    Actually, no. I've had it up to 180 mph at Willow Springs and no shakinging at all. But there are some clear coat issues now

  • @garyalcorn3831
    @garyalcorn38312 ай бұрын

    @@JDArcher is it just a stander boot lid you got or carbon fibre? So u haven’t look in rear view and seen the spoiler flexing at high speed ?

  • @JDArcher
    @JDArcher2 ай бұрын

    ​@@garyalcorn3831 standard trunk lid and no flexing or vibration that I've seen

  • @garyalcorn3831
    @garyalcorn38312 ай бұрын

    @@JDArcher I must have a dodgy one just doesn’t feel safe have lived with it past 2 years going to get rid of it and get carbon fibre duck tail bootlid be more streamlined

  • @JDArcher
    @JDArcher2 ай бұрын

    ​@garyalcorn3831 if you like the Nismo look, I hear EPI (n-tune) makes the best nismo wing on the market. I have their fenders and they're great

  • @davida7713
    @davida77132 ай бұрын

    these are shocking bad overated junk

  • @JDArcher
    @JDArcher2 ай бұрын

    What leads you to believe that?

  • @FunTimeStudios82
    @FunTimeStudios822 ай бұрын

    What’s the steering like in these cars? Steering feel is super important for a sports car.

  • @JDArcher
    @JDArcher2 ай бұрын

    The cat feels heavy when on normal driving, it changes when at speed

  • @DJizz82
    @DJizz822 ай бұрын

    Great video!! Lot of props doing the conversion in a parking structure. Since you have the JDM and USDM head-light, just get the USDM headlight, the light beam points to the proper side of the road for as it’s a Left handed car. Your bumper sags because you need the s14 Kouki bumper retainer, once installed it will fit properly. BTW It’s discontinued and you would need to source it out EBay or used. Also to avoid the gap between the top of the headlights and the hood, you also need the rubber strip that goes in between. Unfortunately it’s also been discontinued, but some seller on EBay sells replicas. $200 yikes !!! Kouki crash support/bar is the same as Zenkie

  • @JDArcher
    @JDArcher2 ай бұрын

    Awesome, thank you for the info. We will continue the build once we find those pieces

  • @mickeyhartsell6096
    @mickeyhartsell60962 ай бұрын

    You are such a liar, Honda hater😂 I bet you have never even owned an S2K.

  • @Twobarpsi
    @Twobarpsi2 ай бұрын

    Great video and job! Car looks so much better!!

  • @JDArcher
    @JDArcher2 ай бұрын

    Thank you

  • @marksmith8299
    @marksmith82992 ай бұрын

    Great info mate

  • @samg9694
    @samg96942 ай бұрын

    What size wrench? Great vid

  • @Esiddik
    @Esiddik2 ай бұрын

    Watching this in 2024. GTR STILL LIVE 🎉

  • @AnekoGT
    @AnekoGTАй бұрын

    What's the point of it living if Nissan will do anythimg but upgrade the car? It is the exact same thing since 2007

  • @Esiddik
    @EsiddikАй бұрын

    @@AnekoGT because it’s beautiful 🥹 I mean they do upgrade small stuff , it’s perfect rhe way it is. 🥹

  • @jarredthebear89
    @jarredthebear892 ай бұрын

    I'm here in 2024 and they just released the t spec r35!! Been my dream car forever. Hopefully I can buy one soon. End of this year maybe this time n3xt year for my bday in may..

  • @Devest8
    @Devest82 ай бұрын

    Easy.. live IN the car

  • @fixingphoenix5146
    @fixingphoenix51462 ай бұрын

    The real question is why did the not just rebadge the Lexus rC or lc as a Supra, that they where currently making

  • @brainiac006
    @brainiac0063 ай бұрын

    Im new in the jdm market and love the looks of the gtr r35, what I dont understand yet is why some model prices vary so much, are those nismo,premium,black edition body kits/rims/carbon fiber trims only or the actual engine is upgraded? Can someone explain?

  • @JDArcher
    @JDArcher3 ай бұрын

    Except for the nismo, which got some upgraded turbos, the engine and transmission are all the all the same. The packages are mainly esthetic

  • @brainiac006
    @brainiac0063 ай бұрын

    @@JDArcher thank you for the quick response🙏🏼 unbelievable price tag for visual/cosmetic differences that you can buy a base model and do the body kits later on I guess. I thought there was a difference like base meredes to amg but thanks for clarifying. There is a high spec gtr r35 nismo sv 21’ on carsales here in Australia for 699k, its mindblowing

  • @JDArcher
    @JDArcher3 ай бұрын

    ​@brainiac006 that's what I'm doing. I got a black edition due to a good deal, and am doing a Nismo clone

  • @renevaladez8835
    @renevaladez88353 ай бұрын

    Nice!! Keep up the great work and looking forward to the next video! 🙌🙌

  • @JDArcher
    @JDArcher3 ай бұрын

    Awesome. Thank you

  • @all-seasonracing520
    @all-seasonracing5203 ай бұрын

    The kouki crash bar, retainer, and the retainer brackets are all different than Zenki. Hope this helps!

  • @JDArcher
    @JDArcher3 ай бұрын

    It does actually. Thank you

  • @BatGamershow0661940
    @BatGamershow06619403 ай бұрын

    Did you hear the news about the GTR r35 special trims Skyline and Takumi spec it might be the last model

  • @JDArcher
    @JDArcher3 ай бұрын

    Ya, I heard. As to it being the last model year, Nissan has been saying that every year for the last 3 to 4 years, so I don't know how if I believe it yet. However, a lot of their promotional work seems to support the idea their might finally be the end of the 35

  • @vivuvideo480
    @vivuvideo4803 ай бұрын

    Nice stolen vid that I found on Twitter😂

  • @JDArcher
    @JDArcher3 ай бұрын

    Someone stole my video?