I am an enthusiast of many things. I will try to bring you my understanding of them as a normal user. Maybe together we can become power users. I will focus on the things I like specifically Tesla, Gaming, DIY Projects, and Outdoor Activities.
Dude you sound like Cleveland on the Family Guy 😂 great video, I need to do the same on mine 😊
@DoingitDave5 ай бұрын
Haha
@christophermeister37067 ай бұрын
Thanks, have one of these in Buffalo and use it quite a bit. Does the job.
@mikeeeeee55510 ай бұрын
You’re really not optimizing your filtration capacity, your system is not very efficient. The phosphate filter basically also serves as your first polypro sediment filter. I would adjust the order and improve your filtration capacity according to the follow order: PHO > GAC > ACB An easy way to also get more sediment capacity is to install a 50um “spin down” pre-filter on your system inlet.
@adriantalukderhossain772811 ай бұрын
Cheers, mate
@Jasmine-gw1uw Жыл бұрын
3rd or 4th quietest but Honestly I think the insulation is pretty redundant I like the old blender motor type from the 70s and 80s and wanna figure out if we have good enough foams and rubbers now to make those higher speed motors quiet (back than they only had styrofoam and thin open cell polyethylene sponge foam)
@DanielGomez-cf6vk Жыл бұрын
I prefer these over shark bites my menards have the aqua locks
@darlenevaldivia Жыл бұрын
I have a corner tub and previous owners put in a wall hand held shower unit, I am renovating and do not want to have this on the wall. can I cap the pipes as above, and then close up wall. Or do I have to remove everything in wall?
@DoingitDave Жыл бұрын
These are really good to temporary work. If you are looking to keep that change permanent then you either want to cap and solder or remove completely. I wouldn’t feel comfortable leaving these in the wall.
@jeremyroberson8676 Жыл бұрын
Dude you really should consider cleaning your grill a little more often. I’m sorry but I wouldn’t eat anything off that grill . Then to top it all off, you laid the cooking grates in the grass eww. That’s disgusting
@DoingitDave Жыл бұрын
Don’t over think it.
@Addiktzz Жыл бұрын
Agreed. NEVER let your grill get to this point. All you’ll be tasting is ash and whatever is burning on that foil.
@kle2217 Жыл бұрын
Good to know, thanks! Has anyone had any experience with other car service/tire places with Tesla tire rotation service? Was curious to know if any car/tire place is able to rotate tires on Tesla vehicles or if they charge more for it seeing as how Tesla is more "special"?
@michaelkarageorgis4629 Жыл бұрын
Oh Jesus.... what did I just watch
@DoingitDave Жыл бұрын
🤔
@petethehandyman9185 Жыл бұрын
Looks good sir! Get the brisket chilled before trimming,makes it easier to cut. Also, be careful with that knife! Always cut away from yourself,put your hand behind the knife not in front of it. Retired meat cutter,I have the scars to prove it!
@DoingitDave Жыл бұрын
Great advice.
@racheldawson3554 Жыл бұрын
Great video! Fantastic meat!
@DoingitDave Жыл бұрын
Thanks 👍 It was fun to make. Next one will be *better.*
@johnbarron4843 Жыл бұрын
What a hack job. At lease sand the damn rust off first 😂😂😂🤦🏻♂️🤦🏻♂️🤦🏻♂️
@DoingitDave Жыл бұрын
That’s a good thought. The spray is designed to go over the rust. So we will see how it holds up.
@parker4427 Жыл бұрын
𝔭𝔯𝔬𝔪𝔬𝔰𝔪 💪
@montyhogan7925 Жыл бұрын
😓 𝓅𝓇o𝓂o𝓈𝓂
@petethehandyman9185 Жыл бұрын
Slick! Nice custom touch!
@DoingitDave Жыл бұрын
Thanks for the support. It’s a great way to change up a car
@coach.b Жыл бұрын
Bought it last week and got it today. Tested it and it works perfectly well. For the mic I'm NOT using the centercam mic but a different external one.
@DoingitDave Жыл бұрын
I have a home setup and a working setup and honestly, it is really weird not having the center cam while at work.
@lewisclark56942 жыл бұрын
Thank you!!!
@petethehandyman91852 жыл бұрын
Nice accessory,easy to install
@DoingitDave2 жыл бұрын
Very easy.
@petethehandyman91852 жыл бұрын
I can see a Tesla in my future!
@DoingitDave2 жыл бұрын
It’s so amazing.
@doingitruss99422 жыл бұрын
Nice video.
@opsvideos74192 жыл бұрын
I will be buying one of these cameras. I hate having to look away. This is pretty neat.
@marialehew52682 жыл бұрын
Will this work on pvc pipes
@DoingitDave2 жыл бұрын
No, this is specifically designed for copper pipes. You will want to use a hack saw or other saws
@petethehandyman91852 жыл бұрын
Nice camera!
@DoingitDave2 жыл бұрын
Thanks. Quality of camera is awesome. But that sound. Eek. I have lots of options for the sound.
@brandonsmith38732 жыл бұрын
Great Vid!Bro
@DoingitDave Жыл бұрын
Thanks
@Crypt1q2 жыл бұрын
Thanks for the review. How's the texture of the trunk mat? Curious if it's soft and rubbery or rigid? Would a cooler slide around on it?
@DoingitDave2 жыл бұрын
I would say a full cooler would tip before it slides.
@mbaker8252 жыл бұрын
I noticed the seam of your foil should be the other way. The left side should overlap the right side towards the grease trap. That would prevent more of it from getting under the foil
@DoingitDave2 жыл бұрын
Exactly
@MarkJohnson-vp3uk2 жыл бұрын
Great video! But how did you get the panel to fit snuggly under the dash? I have a significant gap on the right side and cannot get a snug fit. Thanks.
Not bad, good video.my next car will be an electric Thanks
@DoingitDave2 жыл бұрын
I remember when I first got this car. I was always had range anxiety just because I didn’t know any better. So I wanted to share my experiences to reduce other newbies.
@marciananton92262 жыл бұрын
Why would I use a referral code? Will it help me or just someone else?
@DoingitDave2 жыл бұрын
This video is old. That was back when it got you free supercharging.
@frank1182 жыл бұрын
Well done sir!
@John3_16_2 жыл бұрын
Thank you for sharing this video with us!
@callizarazo34092 жыл бұрын
Put this in my Model 3. It was one of the first things I got for Model Y. Great Video. I would only add to turn the power OFF Before starting.
@NederlandGuy2 жыл бұрын
Tesmanian is a joke! I just bought a full set of mats for my Model Y then asked for a return before I even installed them. Days went by and no response from the company. I even looked on their website and no phone number is listed. Once I get a response they said they are just a wonderful company with 1000s of satisfied customers. Again I email them asking for a return label as I wanted a refund. More days roll by and finally they respond telling me to send them back at my expense. No instructions, no label, nada. What a clown operation. I get better service from my local ice cream shop.
@DoingitDave2 жыл бұрын
Sorry you had such poor luck. I’m still happy with mine in both my cars. Also, I didn’t know you can return ice cream. You learn something new everyday.
@JackLee-et2ir2 жыл бұрын
Great Job, Thanks!
@andyd30632 жыл бұрын
Thanks for this thorough walk-through. Even though I was done with my install when I watched it, it was far better than the video on the Teslamize product page! The extra black piece you had leftover at the end is some sort of spacer that rests on some fasteners right under the veneer on the dash. The second Teslamize install video briefly(!) shows the spacer being put in place before the trim piece is slid in over the top of it. I backed up a few steps, installed it (took a lot of time to get everything lined up without the spacer falling into the dash!), and I can't tell any difference. In the end, it looks good, but like a few commenters mentioned below, it's wobbly. My brother has two and neither are wobbly. After spending over an hour on this install which I thought would take 15 minutes, I just wanted it to be over, but one day, I might reverse a few steps and really torque those bolts to see if that helps. And I did the same as you with that last piece; test-fitting it didn't seem like it was going to be of much value, so I threw it back in the box.
@jorgepinto50292 жыл бұрын
is the display then lower or is it the same height as before?
@DoingitDave2 жыл бұрын
It is slightly lower than it was. More protruding outward as well.
@JoeSmith-kn5wo2 жыл бұрын
Thanks, now I know what settings to turn off. Heading to airport today. 😁
@DoingitDave2 жыл бұрын
Awesome. I’ve never had a problem with parking and not being plugged in.
@LeiChat2 жыл бұрын
Did you get the retrofit? I couldn't spot a more recent video on the topic in your channel.
@TreyMcClain12 жыл бұрын
Going through your videos to see some of your experiences since I just got a Model 3. We considered a Model Y so we could replace our ICE vehicles completely and take it on trips, but we would need the third row. I've heard the third row doesn't have much room at all. Did you opt for that, or did you stick with the standard configuration?
@DoingitDave2 жыл бұрын
I stuck with the standard setup. I have seen the third row and it is tight. Kids and small adults. I have seen others put kids seats back there. The climbing in the backseat to get to the third row seems tight too.
@TreyMcClain12 жыл бұрын
@@DoingitDave Exactly what I was thinking. I'm loving the 3 right now and know I would have loved the Y too. We went with the Standard Range Plus, as that was a very economical way to get into the electric vehicle game. If things continue going well with that, which I fully expect, we may end up with a Y at some point. For now, I guess we're going to hang onto one of the gas vehicles for trips and loading up a lot of folks when needed. Other than that, the 3 will be the daily vehicle that we probably share, especially since we don't have to go to the office every day anymore. No since in paying for gas if I don't have to.
@DoingitDave2 жыл бұрын
@@TreyMcClain1 smart. You have to do what is best for your family. Rivian is pushing out the truck soon and Cadillac is push their SUV soon too. Both will have high price tags. The model Y is perfect for us. Size, fun to drive and economical. We have two now. I do recommend the adjusting screen for long trips. Which we have done multiple 6+ hours one way trips in and would never drive gas again.
@TreyMcClain12 жыл бұрын
@@DoingitDave That’s great to hear about the long drives being easy. I plan to order the swivel screen mount now after watching your video. That seems like a must have accessory. Thanks for all the info!
@TreyMcClain12 жыл бұрын
@@DoingitDave Well, what a difference a couple weeks make. I have now installed the swivel screen mount in the Model 3. It's great and should definitely come standard. Also, I've gone all in on Rivian since you mentioned it. I have a pre-order for the SUV, the R1S. Very high price tag, but I love what they're doing. Now, to see if they can actually start producing and delivering vehicles. Realistically, I probably won't see one until 2023 or 2024.
@TreyMcClain12 жыл бұрын
Did you pick one yet? Also, how are you liking the ceramic coating?
@johnnymo95182 жыл бұрын
For best cooking outcomes, vacuum after each meal. Never let your pellet grill go past five grilled meals to keep cleaning manageable. Never use water to clean out or rinse your grill. Keep oven cleaner off of painted surfaces. If you have to scrape cooked food off of stainless steel parts, make sure you use a stainless steel scrubber.
@DoingitDave2 жыл бұрын
Great feedback!
@mbaker8252 жыл бұрын
Recteq only recommends cleaning 1-2 times a year
@giovannidelgrande57322 жыл бұрын
I vacuum and change the foil every two to three cooks or after every high temp cook. And do a detailed clean once a year.
Пікірлер
Dude you sound like Cleveland on the Family Guy 😂 great video, I need to do the same on mine 😊
Haha
Thanks, have one of these in Buffalo and use it quite a bit. Does the job.
You’re really not optimizing your filtration capacity, your system is not very efficient. The phosphate filter basically also serves as your first polypro sediment filter. I would adjust the order and improve your filtration capacity according to the follow order: PHO > GAC > ACB An easy way to also get more sediment capacity is to install a 50um “spin down” pre-filter on your system inlet.
Cheers, mate
3rd or 4th quietest but Honestly I think the insulation is pretty redundant I like the old blender motor type from the 70s and 80s and wanna figure out if we have good enough foams and rubbers now to make those higher speed motors quiet (back than they only had styrofoam and thin open cell polyethylene sponge foam)
I prefer these over shark bites my menards have the aqua locks
I have a corner tub and previous owners put in a wall hand held shower unit, I am renovating and do not want to have this on the wall. can I cap the pipes as above, and then close up wall. Or do I have to remove everything in wall?
These are really good to temporary work. If you are looking to keep that change permanent then you either want to cap and solder or remove completely. I wouldn’t feel comfortable leaving these in the wall.
Dude you really should consider cleaning your grill a little more often. I’m sorry but I wouldn’t eat anything off that grill . Then to top it all off, you laid the cooking grates in the grass eww. That’s disgusting
Don’t over think it.
Agreed. NEVER let your grill get to this point. All you’ll be tasting is ash and whatever is burning on that foil.
Good to know, thanks! Has anyone had any experience with other car service/tire places with Tesla tire rotation service? Was curious to know if any car/tire place is able to rotate tires on Tesla vehicles or if they charge more for it seeing as how Tesla is more "special"?
Oh Jesus.... what did I just watch
🤔
Looks good sir! Get the brisket chilled before trimming,makes it easier to cut. Also, be careful with that knife! Always cut away from yourself,put your hand behind the knife not in front of it. Retired meat cutter,I have the scars to prove it!
Great advice.
Great video! Fantastic meat!
Thanks 👍 It was fun to make. Next one will be *better.*
What a hack job. At lease sand the damn rust off first 😂😂😂🤦🏻♂️🤦🏻♂️🤦🏻♂️
That’s a good thought. The spray is designed to go over the rust. So we will see how it holds up.
𝔭𝔯𝔬𝔪𝔬𝔰𝔪 💪
😓 𝓅𝓇o𝓂o𝓈𝓂
Slick! Nice custom touch!
Thanks for the support. It’s a great way to change up a car
Bought it last week and got it today. Tested it and it works perfectly well. For the mic I'm NOT using the centercam mic but a different external one.
I have a home setup and a working setup and honestly, it is really weird not having the center cam while at work.
Thank you!!!
Nice accessory,easy to install
Very easy.
I can see a Tesla in my future!
It’s so amazing.
Nice video.
I will be buying one of these cameras. I hate having to look away. This is pretty neat.
Will this work on pvc pipes
No, this is specifically designed for copper pipes. You will want to use a hack saw or other saws
Nice camera!
Thanks. Quality of camera is awesome. But that sound. Eek. I have lots of options for the sound.
Great Vid!Bro
Thanks
Thanks for the review. How's the texture of the trunk mat? Curious if it's soft and rubbery or rigid? Would a cooler slide around on it?
I would say a full cooler would tip before it slides.
I noticed the seam of your foil should be the other way. The left side should overlap the right side towards the grease trap. That would prevent more of it from getting under the foil
Exactly
Great video! But how did you get the panel to fit snuggly under the dash? I have a significant gap on the right side and cannot get a snug fit. Thanks.
Can you send me photos? [email protected]
Not bad, good video.my next car will be an electric Thanks
I remember when I first got this car. I was always had range anxiety just because I didn’t know any better. So I wanted to share my experiences to reduce other newbies.
Why would I use a referral code? Will it help me or just someone else?
This video is old. That was back when it got you free supercharging.
Well done sir!
Thank you for sharing this video with us!
Put this in my Model 3. It was one of the first things I got for Model Y. Great Video. I would only add to turn the power OFF Before starting.
Tesmanian is a joke! I just bought a full set of mats for my Model Y then asked for a return before I even installed them. Days went by and no response from the company. I even looked on their website and no phone number is listed. Once I get a response they said they are just a wonderful company with 1000s of satisfied customers. Again I email them asking for a return label as I wanted a refund. More days roll by and finally they respond telling me to send them back at my expense. No instructions, no label, nada. What a clown operation. I get better service from my local ice cream shop.
Sorry you had such poor luck. I’m still happy with mine in both my cars. Also, I didn’t know you can return ice cream. You learn something new everyday.
Great Job, Thanks!
Thanks for this thorough walk-through. Even though I was done with my install when I watched it, it was far better than the video on the Teslamize product page! The extra black piece you had leftover at the end is some sort of spacer that rests on some fasteners right under the veneer on the dash. The second Teslamize install video briefly(!) shows the spacer being put in place before the trim piece is slid in over the top of it. I backed up a few steps, installed it (took a lot of time to get everything lined up without the spacer falling into the dash!), and I can't tell any difference. In the end, it looks good, but like a few commenters mentioned below, it's wobbly. My brother has two and neither are wobbly. After spending over an hour on this install which I thought would take 15 minutes, I just wanted it to be over, but one day, I might reverse a few steps and really torque those bolts to see if that helps. And I did the same as you with that last piece; test-fitting it didn't seem like it was going to be of much value, so I threw it back in the box.
is the display then lower or is it the same height as before?
It is slightly lower than it was. More protruding outward as well.
Thanks, now I know what settings to turn off. Heading to airport today. 😁
Awesome. I’ve never had a problem with parking and not being plugged in.
Did you get the retrofit? I couldn't spot a more recent video on the topic in your channel.
Going through your videos to see some of your experiences since I just got a Model 3. We considered a Model Y so we could replace our ICE vehicles completely and take it on trips, but we would need the third row. I've heard the third row doesn't have much room at all. Did you opt for that, or did you stick with the standard configuration?
I stuck with the standard setup. I have seen the third row and it is tight. Kids and small adults. I have seen others put kids seats back there. The climbing in the backseat to get to the third row seems tight too.
@@DoingitDave Exactly what I was thinking. I'm loving the 3 right now and know I would have loved the Y too. We went with the Standard Range Plus, as that was a very economical way to get into the electric vehicle game. If things continue going well with that, which I fully expect, we may end up with a Y at some point. For now, I guess we're going to hang onto one of the gas vehicles for trips and loading up a lot of folks when needed. Other than that, the 3 will be the daily vehicle that we probably share, especially since we don't have to go to the office every day anymore. No since in paying for gas if I don't have to.
@@TreyMcClain1 smart. You have to do what is best for your family. Rivian is pushing out the truck soon and Cadillac is push their SUV soon too. Both will have high price tags. The model Y is perfect for us. Size, fun to drive and economical. We have two now. I do recommend the adjusting screen for long trips. Which we have done multiple 6+ hours one way trips in and would never drive gas again.
@@DoingitDave That’s great to hear about the long drives being easy. I plan to order the swivel screen mount now after watching your video. That seems like a must have accessory. Thanks for all the info!
@@DoingitDave Well, what a difference a couple weeks make. I have now installed the swivel screen mount in the Model 3. It's great and should definitely come standard. Also, I've gone all in on Rivian since you mentioned it. I have a pre-order for the SUV, the R1S. Very high price tag, but I love what they're doing. Now, to see if they can actually start producing and delivering vehicles. Realistically, I probably won't see one until 2023 or 2024.
Did you pick one yet? Also, how are you liking the ceramic coating?
For best cooking outcomes, vacuum after each meal. Never let your pellet grill go past five grilled meals to keep cleaning manageable. Never use water to clean out or rinse your grill. Keep oven cleaner off of painted surfaces. If you have to scrape cooked food off of stainless steel parts, make sure you use a stainless steel scrubber.
Great feedback!
Recteq only recommends cleaning 1-2 times a year
I vacuum and change the foil every two to three cooks or after every high temp cook. And do a detailed clean once a year.
I recommend cleaning ever 2 to 3 cooks
That’s a clean smoker.
What kind do i need to get?
www.homedepot.com/p/InSinkErator-Evolution-Select-Plus-3-4-HP-Continuous-Feed-Lift-Latch-Garbage-Disposal-with-Power-Cord-Kit-SELECT-PLUS-W-CDK/316528499?g_store=6925&source=shoppingads&locale=en-US&mtc=Shopping-VF-F_D29A-G-D29A-029_014_DISPOSERS-InSinkErator-NA-Feed-PLA_LIA-2153902-WF-MinorAppl&cm_mmc=Shopping-VF-F_D29A-G-D29A-029_014_DISPOSERS-InSinkErator-NA-Feed-PLA_LIA-2153902-WF-MinorAppl-71700000048198738-58700004804098316-92700041174939342&gclid=CjwKCAjw1JeJBhB9EiwAV612y9BH1jfN1GhcsGYiCfdBIcoLgT81XhkK1P-D7f04u4On2FTea4BM_xoCYZ8QAvD_BwE&gclsrc=aw.ds
Any Insinkerator Evolution series model is this quiet.
You never finished showing the finished set up. Making sure the right side was right up against the dash.
Goooooood video 👍👍👍❤❤🛎👀👈
I'm having trouble with the 10mm bolts. Any advice?
What is your problem specifically? I heard they had some faulty bolts. Can you email pics to [email protected]
Good morning friends
Very good, nice to meet you, don't forget, sis 🙏🏼