Is this the same Chassis on your Esty Store for the wpl?
@Oppai_FactoryКүн бұрын
@@russell6869 it is yes
@DadsRCGaragePNW7 күн бұрын
Looking good bro!!
@dieseljunky85059 күн бұрын
I want to see the entire build. I just got my 1st trx 4m in the bronco and want to get the flex you have and 4 wheel steering
@PerdueRC17 күн бұрын
Is this the right you put a castle 0808 in?
@Oppai_Factory17 күн бұрын
Ya
@PerdueRC17 күн бұрын
That thing rips!
@revsonsrc957317 күн бұрын
Sick man that thing rips! Haha ripper ripping 😎 subbed 💪
@chrisKSand17 күн бұрын
And which length do you recommend for the shocks on lwb 177mm?
@Oppai_Factory17 күн бұрын
59mm
@chrisKSand16 күн бұрын
Cool, I got a set of these. Thanks!
@chrisKSand17 күн бұрын
Great video, great build. Ordered and can‘t wait to get it. What‘s the width of that rig? Thanks
@Oppai_Factory17 күн бұрын
Injora +4mm axles w/ 6mm hexes.
@chrisKSand16 күн бұрын
👍🏻
@Cbam87119 күн бұрын
Thats pretty sick
@arnoldangel307727 күн бұрын
What model trx4m was it that you can add it on to?
@Oppai_Factory27 күн бұрын
It will work with any since you need the links and shafts regardless, but with the Hightrails, you only need one set where as the Defender/ Bronco need 2 sets of HT rear 75mm links and driveshafts.
@afella29Ай бұрын
Nice 👍🏻 where did you get the sliders from?
@Oppai_FactoryАй бұрын
They are Injora SCX24 (C-10) sliders.
@MetalRay88Ай бұрын
I definitely wish I lived closer to the cap to be able to hit it up more often , killer video 🤘🏻
@OGRadGrowАй бұрын
Awesome scenery, awesome Rigs, you really are pulling some hard lines. Nice 👍🏾
@Macondray17Ай бұрын
Sweet rig! I am looking forward to buying a trx4m f150 and lowering it! I love the video!
@markwoodlief6522Ай бұрын
How’s that motor do for slow speed with the 2speed setup
@Oppai_FactoryАй бұрын
Decent. Especially on 2s. It does lack a bit of torque being 7500kv and tiny. Its no crawler motor...
@petejones6827Ай бұрын
you run out of matching tires lol looks good man
@Oppai_FactoryАй бұрын
It was the test bench. Used what I had to build. This was in the before times, when I couldn't buy boxes full of Injora parts every week.
@Rc_doctor2 ай бұрын
Love it
@dalelusted39472 ай бұрын
How do I get one? That looks awesome!
@Oppai_Factory17 күн бұрын
I can build you one if you like. Shoot me a pm through etsy, insta, or fb if you'd like to chat more.
@Mr.Zepeda2 ай бұрын
Damn I'm ready for a few of these! A C54 would be killer!
@Oppai_Factory27 күн бұрын
Thats next. I have one but the chassis needed it similar but too different to retrofit the c24 chassis so ill make a bespoke one.
@KTMRider5242 ай бұрын
Will the 24.4:1 gears fit in the standard transmission housing?
@Oppai_Factory2 ай бұрын
Ya they should they are smaller than the 40.3:1 gears.
@Imfocused2472 ай бұрын
Impressive!
@boostchub2 ай бұрын
Your rigs and products are always so impressive. Keep it up!
@masonwiggins96583 ай бұрын
Great video!
@rcfungames3 ай бұрын
Another freaking awesome build!! 💯💯💯 And some great slow motion takes!! That thing really rips!! And what a great place to run a rig like that!! I really appreciate what you do for the RC community! And it is really great, to see producing content for KZread!! See you around bro! 👊😉
@rcfungames3 ай бұрын
It's great to see you on KZread bro!! The IR40 looks awesome out on the trail!! So does the defender!!! And what a great location to do some crawling and capture some footage! Great job on the video bro 💯 I will be checking out some more of your content!! And of course! to show my support, I have subscribed bro 🤜💥🤛
@R_Long4 ай бұрын
I'm thinking about this DIY kit any video with the body off?
@Oppai_FactoryАй бұрын
Not yet. I plan to make one but how to vids take a lot of prep to make.
@vladrxd14 ай бұрын
What transmission and tearing do you run on this?
@eugen3yackl3892 ай бұрын
I believe it’s a fcx24 2 speed transmission
@gwraffe68124 ай бұрын
does the preassembled hauler kit have the body and everything?
@dalaw66004 ай бұрын
Can you do a build breakdown on your setup. I’d appreciate it 👍
@zacjuchi23604 ай бұрын
Do the diff gears make it faster
@curtis51454 ай бұрын
The front wheels skipped a little bit 😂😂😂
@makestuffbetter194 ай бұрын
Did that just skim across the water? That’s dope!
@damonmuse65675 ай бұрын
It has all the features of my 1/10 Capra, and looks like it performs great.. such a sweet build! I have a trx4m tarantula, and an fcx24. Now you got me thinking!
@TheShopMiniRC5 ай бұрын
Nice!! Great lookin rig for sure. Love the Formula Off-road!
Пікірлер
Man, That things moves. So sick, love the build
Is this the same Chassis on your Esty Store for the wpl?
@@russell6869 it is yes
Looking good bro!!
I want to see the entire build. I just got my 1st trx 4m in the bronco and want to get the flex you have and 4 wheel steering
Is this the right you put a castle 0808 in?
Ya
That thing rips!
Sick man that thing rips! Haha ripper ripping 😎 subbed 💪
And which length do you recommend for the shocks on lwb 177mm?
59mm
Cool, I got a set of these. Thanks!
Great video, great build. Ordered and can‘t wait to get it. What‘s the width of that rig? Thanks
Injora +4mm axles w/ 6mm hexes.
👍🏻
Thats pretty sick
What model trx4m was it that you can add it on to?
It will work with any since you need the links and shafts regardless, but with the Hightrails, you only need one set where as the Defender/ Bronco need 2 sets of HT rear 75mm links and driveshafts.
Nice 👍🏻 where did you get the sliders from?
They are Injora SCX24 (C-10) sliders.
I definitely wish I lived closer to the cap to be able to hit it up more often , killer video 🤘🏻
Awesome scenery, awesome Rigs, you really are pulling some hard lines. Nice 👍🏾
Sweet rig! I am looking forward to buying a trx4m f150 and lowering it! I love the video!
How’s that motor do for slow speed with the 2speed setup
Decent. Especially on 2s. It does lack a bit of torque being 7500kv and tiny. Its no crawler motor...
you run out of matching tires lol looks good man
It was the test bench. Used what I had to build. This was in the before times, when I couldn't buy boxes full of Injora parts every week.
Love it
How do I get one? That looks awesome!
I can build you one if you like. Shoot me a pm through etsy, insta, or fb if you'd like to chat more.
Damn I'm ready for a few of these! A C54 would be killer!
Thats next. I have one but the chassis needed it similar but too different to retrofit the c24 chassis so ill make a bespoke one.
Will the 24.4:1 gears fit in the standard transmission housing?
Ya they should they are smaller than the 40.3:1 gears.
Impressive!
Your rigs and products are always so impressive. Keep it up!
Great video!
Another freaking awesome build!! 💯💯💯 And some great slow motion takes!! That thing really rips!! And what a great place to run a rig like that!! I really appreciate what you do for the RC community! And it is really great, to see producing content for KZread!! See you around bro! 👊😉
It's great to see you on KZread bro!! The IR40 looks awesome out on the trail!! So does the defender!!! And what a great location to do some crawling and capture some footage! Great job on the video bro 💯 I will be checking out some more of your content!! And of course! to show my support, I have subscribed bro 🤜💥🤛
I'm thinking about this DIY kit any video with the body off?
Not yet. I plan to make one but how to vids take a lot of prep to make.
What transmission and tearing do you run on this?
I believe it’s a fcx24 2 speed transmission
does the preassembled hauler kit have the body and everything?
Can you do a build breakdown on your setup. I’d appreciate it 👍
Do the diff gears make it faster
The front wheels skipped a little bit 😂😂😂
Did that just skim across the water? That’s dope!
It has all the features of my 1/10 Capra, and looks like it performs great.. such a sweet build! I have a trx4m tarantula, and an fcx24. Now you got me thinking!
Nice!! Great lookin rig for sure. Love the Formula Off-road!
What motor is that
Furitek Greyhound 7500kv
👌
Nice touch putting a rotary smack in the middle!