Пікірлер

• 
  @MADBATTERY2 күн бұрын

  I have the exact same 1 chilling in a shed, maybe it's time to put her back on the streets. I Mean it's just been what 14 years?

• 
  @no662 күн бұрын

  coming along nicely. I find brining the fork up through the tripples about 4 - 5mm sharpens the steering a tad. This is on the stock rear shock that sags too much. Micht befine on the upraded shock you have

• 
  @pizzamad33342 күн бұрын

  low miles aprilia RS125 full power for sale on gumtree. only done 101 miles

• 
  @DarylWand3 күн бұрын

  Thanks for the video, I'm curious would this work better than a Boosterplug as that richens the mixture through the entire range??

• 
  @bio45463 күн бұрын

  Finally I've found someone who agrees with me 100% regarding the e46 M3 sound. Every aftermarket exhaust completely ruins the sound of that fantastic I6, they became simply too raspy to appreciate.

• 
  @IceBloodedZero3 күн бұрын

  Excellent guide. Thank you for this.

• 
  @markleaning1074 күн бұрын

  A car that revs to over 8000 rpm but has weak rod bearings the typical BMW junk

• 
  @spasstamatov55134 күн бұрын

  I am wondering, the engine of this bike is four cylinders. Is that means that that the engine fires in every 90 degrees, or there is cylinders firing in the same time? Can someone explain it to me?

• 
  @RUS_US4 күн бұрын

  15:00 that is why it stack. The red seal dryes out to glue

• 
  @nickmonkey2844 күн бұрын

  Great video Nice to see a bit of elbow grease working its magic

• 
  @MrMetsfan674 күн бұрын

  How's the call quality on this unit in your experience? I upgraded from the previous model with an external microphone to this model, to try and improve call quality but callers are reporting a terrible echo on their end of the phone. Are you experiencing the same?

• 
  @matthewstone29275 күн бұрын

  Iv got the rc8 it has an acpovic and maped to 179 bhp

• 
  @The888Redlich5 күн бұрын

  Not sure what year your E46 is but mine was 2004.5 model and the CSL SMG software came with M mode for the traction control which was excellent and much less intrusive than standard traction control

• 
  @brettwalker49506 күн бұрын

  You killed it amico! Beautiful

• 
  @ianday387 күн бұрын

  Enjoy Assen, been twice. Watch your security there though, keep your bike locked with a lock through the back wheel and keep your valuables in the bottom of your sleeping bag if you're camping. I had my phone and wallet nicked from inside my tent while I was asleep and I've heard of bikes being nicked and revved til they blow in the past. It's still a great trip though.

• 
  @stevencurtis-rich41787 күн бұрын

  Think i would of gone black top yoke with white lettering.

• 
  @rungassamydonovan477 күн бұрын

  Thanks mate, this is very inspiring video to rebuild mine

• 
  @madhunter64208 күн бұрын

  seen a 60k KM M3 e92 for 60k... 2013

• 
  @pb2222218 күн бұрын

  Retrobright the windscreen. Its not a product its a process. There are videos that explain it better than I can but basically its soaking it in hydrogen peroxide while using UV lights. It removes all the yellowing and you wont risk melting or burning by trying to machine polish it back to clear after sanding.

• 
  @Endrjo8 күн бұрын

  i dont get it. you restore road bike to race only bike ? I am a little disappointed to tell the truth. The fairings can be seen to be of poor quality.

• 
  @wyattoutlaw23708 күн бұрын

  I had the RGV250 .. but they were all from the same 2 stroke stable.

• 
  @seangould85119 күн бұрын

  Great video, thanks for the update and maybe see you at Assen!👍

• 
  @johnmac.67609 күн бұрын

  Great video mate, awsome work. 👍👍🤘🤘

• 
  @tiff91379 күн бұрын

  Finish is perfect on fork top bracket 👏🏻, the lines are gorgeous on the grp. Can't wait to hear that engine. 👍🏻🇮🇪

• 
  @CRS15839 күн бұрын

  Love your videos mate. Always look forward to an update

• 
  @nigelstacey56129 күн бұрын

  Pleased to report the NEXX product placement is going well…😂

• 
  @paulbudford9 күн бұрын

  Top yoke looks great with the Aprilia logo in black.👍 You've made a lot of progress this episode.

• 
  @flippingcars1019 күн бұрын

  You forgot to give my channel a shoutout 😂!! I’m going to be uploading my restoration videos later this week. Just finishing up the pick up video so please do give it a watch mate. I’m sure you will love what iv got lined up.

• 
  @alexanderpatterson63169 күн бұрын

  Yes the triple should be aluminium like you did, IMO, as it was on my 1995 RS Extrema… looks excellent to me. Glad you didn’t go black on the triple.

• 
  @jimmy62839 күн бұрын

  Well done pal great job 👏 rs125 was the bike to have when i was 20, that and the cagiva mito

• 
  @cecillightley14409 күн бұрын

  Yokes are spot on,especially with the blue fork cap bolts👍

• 
  @AndrewSinclair-bk9ho9 күн бұрын

  on the screen use t-cut and the toothpaste to restore.

• 
  @AndrewSinclair-bk9ho9 күн бұрын

  Lift with a platform is very useful ,you could have used to hoist rear end if frame to raise for engine removal and installation. great for heavy lifting of any sort I use them almost daily

• 
  @AndrewSinclair-bk9ho9 күн бұрын

  Bikes of Rye is only good for the comedy , he is dangerous to himself and anyone who rides the bikes he has DONE. Does not know anything about bikes or tools and how to use them!

• 
  @Dalekennth19699 күн бұрын

  Hello you going to paint inside. Black are going to leave it white on outside. I think it look better if it painted

• 
  @YZbonde9 күн бұрын

  when the swingarm is ALU you can just weld a nut onto the broken stud, ive done that plenty of times on wheels and frames :)

• 
  @robertgraham44629 күн бұрын

  T cut or similar polish should bring up your screen andalotof elbow grease

• 
  @leaflee20669 күн бұрын

  PTR count 37! seriously though it's coming together and looking nice.

• 
  @andrewmoylan62959 күн бұрын

  G'day James , I was in Assen 2006 back then it was a Saturday race, but It was the time of my life, working in Germany ,driving up to Holland, and seeing the late Nikki Hayden winning and of course Lorenzo on the 2 stroke 250 ....just mint. Have a blast mate.

• 
  @charlesemerson67639 күн бұрын

  Looking good.

• 
  @RikiWalsh10 күн бұрын

  Works a treat like most decent detailing products.

• 
  @mikesphoenix_e46m310 күн бұрын

  You really getting through this build now mate and the screen you thought about giving it a light tint with some tint spray so takes your eyes away from the fading maybe a light tint enough to get rid of the fading colour but keep up the hardwork mate you doing great and with having a life and working i know you can struggle fitting everything in

• 
  @MrVinnyh10 күн бұрын

  Looks great! As a former PSV fitter we didn't use easy outs' often but choose to drill and tap as the better method! as easy outs more often broke and created more problems! If you respray the fairing / seat couling simple silver black with your new c/helmet logos

• 
  @markhouston340410 күн бұрын

  Ooh, youtube recommends! Damn. Already follow them all 😆

• 
  @69BODIE6910 күн бұрын

  Top Yoke looks Great tbh Its coming together very nicely..

• 
  @dgw415010 күн бұрын

  Huge progress! Really coming together nicely. Very jealous of the Assen trip too. Have fun! 👍

• 
  @stoneautomotive10 күн бұрын

  Thank you 👌😎 Shall hopefully be filming the trip for the channel so you can enjoy it virtually in a few weekends 😅👌

• 
  @BikesofRye10 күн бұрын

  Coming along nicely!! 😎

• 
  @stoneautomotive10 күн бұрын

  Cheers mate 😎👌 Need to catch up on your latest episode! Should try and get a collaboration when there both done 😎

• 
  @MrJimoto10 күн бұрын

  Man , I am waiting for the first ride and wanna see your excitement after all this time with this bike 😁. Cheers for the hard work mate, in this episode looked harsh with these body frames!

• 
  @stoneautomotive10 күн бұрын

  You and me both, let’s hope it comes out as planned 😬 Cheers mate, yep this was a big episode and although it looks like it was filmed in half a day this was a few weekends 😅

• 
  @hksvisuals193110 күн бұрын

  Bikes looking great I have been waiting for this video I was so excited when I got the notification I was just thinking you should make some merch I would 100 percent buy some 🤟

• 
  @stoneautomotive10 күн бұрын

  Glad to hear 😎👌 Thanks for the support, I really need to kick me arse into gear and get the merchandise on the go!

• 
  @ianduckworth992510 күн бұрын

  I’ll be at Assen as well so will keep a look out in case I spot you in the ~100k crowd! 😂

• 
  @stoneautomotive10 күн бұрын

  I’ll no doubt be drunk so look for swaying sun burned me and come say hi 😅👍

• 
  @ianduckworth99255 күн бұрын

  @@stoneautomotivedid I see you on the ‘fan photos’ on the big screen?? 😂