I use it from time to time as I have a lot of other saws but considering the cylinder looks like hell it still has decent power and compression. Like all my old saws I'm sure it could use fresh crankshaft seals.
@Hayden_9111Ай бұрын
Mine sucks… I have problems with it non stop
@bruhman3699Ай бұрын
+90000 aura
@civicboi_2419Ай бұрын
Always gotta say the “that’s not going anywhere”😂🙌🏽
@LoganJohnson-lm2bhАй бұрын
the boat is from a 2 piece mold if you need to replace the flotation foam remove the black rub rail then the aluminum trim then you can separate the iner shell from the outer one then you can remove the old foam reassemble use a hole saw cut holes on inner hull add correct type foam when full put the plugs back in place using fiberglass repair kit and paint over this and your done .I was one of the original workers for Truline boats .
@marksmanmatthew6322Ай бұрын
That’s really cool I’ll remember that for my fb marketplace problem 😂
@LoganJohnson-lm2bhАй бұрын
@@marksmanmatthew6322 Im glad i could help you .I had no fixd job there I did all the wiring for the first factory I went to all the boat shows as a sales person ,I would take older models and modify them like stretch them and widen them to use as plugs to make new molds for new models I was the truck driver to take the boats to shows and dealer deliveries .I was the one that came up with the name sun runner for the cabin cruiser .which was an older mold for the Bayliner company .The owners of witch i also knew .
@numbskullskillsАй бұрын
Not a bad deal.
@JethrosgarageАй бұрын
Worked out awesome, I didn't have to unload it in my yard and re load it nor cut it up in tiny bits with a chain saw and put it in the trash bin a little at a time! Local transfer station will NOT take fiberglass boats.
@numbskullskillsАй бұрын
@@Jethrosgarage is the guy going to fix it..iv set them on fire the fiber is the only thing left. cool for you worked out great
@Vibrolas2 ай бұрын
This was a blast!
@numbskullskills2 ай бұрын
slutpill had a iorn maden vib, looks like a good time
@lenny75772 ай бұрын
I have an over heat issue as well. Changed pump and just got new thermostats which looked like a bomb went off in them completely full of sand like cement I fear this is the next step. Was it relatively straightforward did you sand it down before the new gasket was placed and did you use sealer?
@Jethrosgarage2 ай бұрын
Are you still experiencing issues? As far as sealer, no- I used light emery paper making sure to not stay in one place and create a low spot on both heads and block. My biggest issue was this mill ate salt water most of it's life and I had to deal with a broken off head bolt and getting it out etc. which was WHY I did everything but pull the heads as a last resort.
@lenny7577Ай бұрын
Yup now my exhaust manifold is leaking! So I ordered new gaskets for that.
@numbskullskills2 ай бұрын
sounds good and the dog looked and im sure was thinkin can i take that cat on
@Jethro20223 ай бұрын
Looks good, maybe with a little tweaking you can perfect it.
@numbskullskills3 ай бұрын
been awhile buddy.. sure looks like a good idea. did it save your back any.
@spudnikkx11126 ай бұрын
" I do weird shit like modify chainsaws " Understatement of the year ! 😁
@spudnikkx11126 ай бұрын
Tell your son to find a 3 prong hay fork to replace the heavy 4 prong pitch fork. Much lighter, goes faster and far more dangerous !
@spudnikkx11126 ай бұрын
Dang Jethro ! Yall are right up there with da high school lumberjill's in Hayward ! Has that Poulan got the 14 inch bar like my Poulan has ? I got a dozen dead pines for us to tackle out at my new mini ranch. Im thinkin two 14 inch poulans, couple old grey beard vintage sledders, a case of beer, and one charged cell phone to dial 911........ya know, just in case ! Dont worry......tall ones are maybe 70 footers. How much damage could they do ?
@danieljrylander46487 ай бұрын
Looks like sharpie on some Wal Mart merch 😅
@numbskullskills7 ай бұрын
LMAO. Good one. Instead of me chasin momma around the house shell be chasin me!
@Jethro20227 ай бұрын
I love it lol!
@numbskullskills8 ай бұрын
at ONLY 4 payment of 39.95 dang what a deal
@numbskullskills8 ай бұрын
gotta love free wood greens bettr than the stuff u cut down for the state
@Jethrosgarage9 ай бұрын
Engine has been running fine and no more overheat issues or alarms since this repair! Clogged passage and debris in the block were the cause.
@rollingrecords90198 ай бұрын
Good job 💯
@dsciarrino36639 ай бұрын
The best money can buy 👌
@numbskullskills9 ай бұрын
glad to see yeah, you usein it for heat or let it lay thr
@Jethrosgarage9 ай бұрын
Not good firewood, sort of like burning a wet rotted sponge, I dragged it about 100 ft away with the truck. It's DOT property, could have called them to remove it but would have been 10 calls and a year, I just took care of it myself before it came over my fence.
@numbskullskills9 ай бұрын
wet sponge that wouldnt burn worth a hoot, it looked like the ants about had it cut down for you, lucky you found it when you did, @@Jethrosgarage
@nathaliabielser53709 ай бұрын
'promo sm'
@Indeewoods9 ай бұрын
Haha I didn’t watch the video before my last comment. 😂 I throw my meal on the exhaust of my dozer works great!
@Indeewoods9 ай бұрын
😂😂 Follow you for more cooking tips?? Lol
@Indeewoods9 ай бұрын
😂😂 🍻
@Indeewoods9 ай бұрын
Back when they built everything to last.
@Indeewoods9 ай бұрын
One thing I don’t like about these saws is they suck in saw dust around that cover. Appareny at one time they came with a gasket under that cover.
@Indeewoods9 ай бұрын
Should be able to clean up the piston and throw a new ring on it. I’ve got a cour of xxv deluxe basically the same as those but they need to be gone through.
@Indeewoods9 ай бұрын
Those are great little saws and they rip pretty good. 33 or 38cc I believe I think those were the 38cc.
@Indeewoods9 ай бұрын
Runs good now. Lickily it didn’t trash the cylinder
@Jethrosgarage9 ай бұрын
I put a hundred or so trouble free miles on it in seasons since, last year it blew a head gasket when I went to put it in the shed to leave after a trip. Found you need to re torque heads after a heat cycle or two, they really loosened up. Fresh gasket and she's waiting on my trip this winter. It was a $175 machine 17 years ago. :)
@Indeewoods9 ай бұрын
Good old trikes can’t beat em.
@Jethrosgarage9 ай бұрын
That's up at the home property in Minnesota, my local bud rode out from town on that 200, no brakes and holding a foam cup of coffee from the gas station in one hand :) Kinda a crap video but I mainly put it up so he could see it. Near 40 acres of trails deer and firewood.
@Indeewoods9 ай бұрын
😂😂 Are you looking for investors? Those would be hot sellers. Lol
@numbskullskills9 ай бұрын
hadnt seen anything since the camaro, but what about this sled hows it comin along
@numbskullskills10 ай бұрын
your evil lol
@Wolf-man9310 ай бұрын
You in low range?
@Jethrosgarage10 ай бұрын
My cable to engage low-range forward and reverse does not work so I was in I guess you would call it regular first? That mud is like stinky soup😎
@coonlakebackwoods10 ай бұрын
Nice to see it getting running againA
@numbskullskills10 ай бұрын
dig the hood prop, do them darn pistons work on any car
@Jethrosgarage10 ай бұрын
Nope! But my 'tater fork from da thrift store does!
@numbskullskills10 ай бұрын
they never fail@@Jethrosgarage
@numbskullskills10 ай бұрын
car looks great by the way
@numbskullskills11 ай бұрын
u have a great day too
@GarageWorx11 ай бұрын
Anything helps
@numbskullskills Жыл бұрын
love it.
@keithwarkentin Жыл бұрын
Hello there I am commenting about the colour of the the 8N only to let you know that it looks White on the video and the original Ford Grey is actually a little more Sandy coloured so if you are thinking of repainting it at some point you might want to look into that original Ford Grey I think Dennis Carpenter tractor restoration parts sells the paint. Having said that your tractor does look very good and I don’t want to be a know it all ! I hate when people comment only to try to look smart or to belittle someone that is not my end game you’re a smart articulate person and I enjoyed the video and the rear axle seals and the steering sector seals always want to leak but don’t let any one tell you that those leaks can’t be fixed they can but you have to follow each step in the I&T shop manual it’s an excellent asset to have And both Steiner Tractor parts and Dennis Carpenter tractor restoration parts will send you a parts catalog for free and it’s great for pricing parts. And I think that your Dad must really love you in order to will you that really cool and handy antique tractor Keep that old iron running my friend!😀🇨🇦
@Jethrosgarage Жыл бұрын
Thank you for the kind words! I'm actually fine with the bodywork and paint being a bit rough, because I actually used that tractor and such like it was intended to be. I had purchased a John Deere Gator with a dump bed for good price and surprised him with shortly after he bought that tractor, after which he gave me the tractor. As he got older and his mobility got worse the gator worked perfectly for him. I definitely need to do those axle seals, and clean the brakes up so they will work.! I did not mention it in the video, but you can hear an exhaust leak. The manifold is warped, I need to remove it and have it milled if possible or replace it. Other than that she's a good ol tractor. 😎
@numbskullskills Жыл бұрын
thanks jethro
@numbskullskills Жыл бұрын
what were u sayin about the trolls?
@numbskullskills Жыл бұрын
goog times
@numbskullskills Жыл бұрын
lol what the heck? lucky that bike didnt bounce out. shoudnt go nowhere now
@numbskullskills Жыл бұрын
half the time i clean half the mess an start what ever im workin on, by the time i clean i see 4 maybe 5 crap maybe more projects i suold of clean up before i said darm no more room must clean. FYI started pickin up today.
@numbskullskills Жыл бұрын
that was fun an sure looked funnner with the find in ur face
@nathanmciver6496 Жыл бұрын
I'm excited about this! What is not impressive is the people who built these not thinking about replacement parts being easy to change out! Rivets? :(
Пікірлер
How did this saw home up over the years?
I use it from time to time as I have a lot of other saws but considering the cylinder looks like hell it still has decent power and compression. Like all my old saws I'm sure it could use fresh crankshaft seals.
Mine sucks… I have problems with it non stop
+90000 aura
Always gotta say the “that’s not going anywhere”😂🙌🏽
the boat is from a 2 piece mold if you need to replace the flotation foam remove the black rub rail then the aluminum trim then you can separate the iner shell from the outer one then you can remove the old foam reassemble use a hole saw cut holes on inner hull add correct type foam when full put the plugs back in place using fiberglass repair kit and paint over this and your done .I was one of the original workers for Truline boats .
That’s really cool I’ll remember that for my fb marketplace problem 😂
@@marksmanmatthew6322 Im glad i could help you .I had no fixd job there I did all the wiring for the first factory I went to all the boat shows as a sales person ,I would take older models and modify them like stretch them and widen them to use as plugs to make new molds for new models I was the truck driver to take the boats to shows and dealer deliveries .I was the one that came up with the name sun runner for the cabin cruiser .which was an older mold for the Bayliner company .The owners of witch i also knew .
Not a bad deal.
Worked out awesome, I didn't have to unload it in my yard and re load it nor cut it up in tiny bits with a chain saw and put it in the trash bin a little at a time! Local transfer station will NOT take fiberglass boats.
@@Jethrosgarage is the guy going to fix it..iv set them on fire the fiber is the only thing left. cool for you worked out great
This was a blast!
slutpill had a iorn maden vib, looks like a good time
I have an over heat issue as well. Changed pump and just got new thermostats which looked like a bomb went off in them completely full of sand like cement I fear this is the next step. Was it relatively straightforward did you sand it down before the new gasket was placed and did you use sealer?
Are you still experiencing issues? As far as sealer, no- I used light emery paper making sure to not stay in one place and create a low spot on both heads and block. My biggest issue was this mill ate salt water most of it's life and I had to deal with a broken off head bolt and getting it out etc. which was WHY I did everything but pull the heads as a last resort.
Yup now my exhaust manifold is leaking! So I ordered new gaskets for that.
sounds good and the dog looked and im sure was thinkin can i take that cat on
Looks good, maybe with a little tweaking you can perfect it.
been awhile buddy.. sure looks like a good idea. did it save your back any.
" I do weird shit like modify chainsaws " Understatement of the year ! 😁
Tell your son to find a 3 prong hay fork to replace the heavy 4 prong pitch fork. Much lighter, goes faster and far more dangerous !
Dang Jethro ! Yall are right up there with da high school lumberjill's in Hayward ! Has that Poulan got the 14 inch bar like my Poulan has ? I got a dozen dead pines for us to tackle out at my new mini ranch. Im thinkin two 14 inch poulans, couple old grey beard vintage sledders, a case of beer, and one charged cell phone to dial 911........ya know, just in case ! Dont worry......tall ones are maybe 70 footers. How much damage could they do ?
Looks like sharpie on some Wal Mart merch 😅
LMAO. Good one. Instead of me chasin momma around the house shell be chasin me!
I love it lol!
at ONLY 4 payment of 39.95 dang what a deal
gotta love free wood greens bettr than the stuff u cut down for the state
Engine has been running fine and no more overheat issues or alarms since this repair! Clogged passage and debris in the block were the cause.
Good job 💯
The best money can buy 👌
glad to see yeah, you usein it for heat or let it lay thr
Not good firewood, sort of like burning a wet rotted sponge, I dragged it about 100 ft away with the truck. It's DOT property, could have called them to remove it but would have been 10 calls and a year, I just took care of it myself before it came over my fence.
wet sponge that wouldnt burn worth a hoot, it looked like the ants about had it cut down for you, lucky you found it when you did, @@Jethrosgarage
'promo sm'
Haha I didn’t watch the video before my last comment. 😂 I throw my meal on the exhaust of my dozer works great!
😂😂 Follow you for more cooking tips?? Lol
😂😂 🍻
Back when they built everything to last.
One thing I don’t like about these saws is they suck in saw dust around that cover. Appareny at one time they came with a gasket under that cover.
Should be able to clean up the piston and throw a new ring on it. I’ve got a cour of xxv deluxe basically the same as those but they need to be gone through.
Those are great little saws and they rip pretty good. 33 or 38cc I believe I think those were the 38cc.
Runs good now. Lickily it didn’t trash the cylinder
I put a hundred or so trouble free miles on it in seasons since, last year it blew a head gasket when I went to put it in the shed to leave after a trip. Found you need to re torque heads after a heat cycle or two, they really loosened up. Fresh gasket and she's waiting on my trip this winter. It was a $175 machine 17 years ago. :)
Good old trikes can’t beat em.
That's up at the home property in Minnesota, my local bud rode out from town on that 200, no brakes and holding a foam cup of coffee from the gas station in one hand :) Kinda a crap video but I mainly put it up so he could see it. Near 40 acres of trails deer and firewood.
😂😂 Are you looking for investors? Those would be hot sellers. Lol
hadnt seen anything since the camaro, but what about this sled hows it comin along
your evil lol
You in low range?
My cable to engage low-range forward and reverse does not work so I was in I guess you would call it regular first? That mud is like stinky soup😎
Nice to see it getting running againA
dig the hood prop, do them darn pistons work on any car
Nope! But my 'tater fork from da thrift store does!
they never fail@@Jethrosgarage
car looks great by the way
u have a great day too
Anything helps
love it.
Hello there I am commenting about the colour of the the 8N only to let you know that it looks White on the video and the original Ford Grey is actually a little more Sandy coloured so if you are thinking of repainting it at some point you might want to look into that original Ford Grey I think Dennis Carpenter tractor restoration parts sells the paint. Having said that your tractor does look very good and I don’t want to be a know it all ! I hate when people comment only to try to look smart or to belittle someone that is not my end game you’re a smart articulate person and I enjoyed the video and the rear axle seals and the steering sector seals always want to leak but don’t let any one tell you that those leaks can’t be fixed they can but you have to follow each step in the I&T shop manual it’s an excellent asset to have And both Steiner Tractor parts and Dennis Carpenter tractor restoration parts will send you a parts catalog for free and it’s great for pricing parts. And I think that your Dad must really love you in order to will you that really cool and handy antique tractor Keep that old iron running my friend!😀🇨🇦
Thank you for the kind words! I'm actually fine with the bodywork and paint being a bit rough, because I actually used that tractor and such like it was intended to be. I had purchased a John Deere Gator with a dump bed for good price and surprised him with shortly after he bought that tractor, after which he gave me the tractor. As he got older and his mobility got worse the gator worked perfectly for him. I definitely need to do those axle seals, and clean the brakes up so they will work.! I did not mention it in the video, but you can hear an exhaust leak. The manifold is warped, I need to remove it and have it milled if possible or replace it. Other than that she's a good ol tractor. 😎
thanks jethro
what were u sayin about the trolls?
goog times
lol what the heck? lucky that bike didnt bounce out. shoudnt go nowhere now
half the time i clean half the mess an start what ever im workin on, by the time i clean i see 4 maybe 5 crap maybe more projects i suold of clean up before i said darm no more room must clean. FYI started pickin up today.
that was fun an sure looked funnner with the find in ur face
I'm excited about this! What is not impressive is the people who built these not thinking about replacement parts being easy to change out! Rivets? :(