Пікірлер

• 
  @Nick324866 сағат бұрын

  I used and alligator clip on the bottom right when I got it and this damn thing only goes down to 50f in the fridge if it’s 70f degrees outside, freezer will go between 4 and 15

• 
  @ChrisDoutre15 сағат бұрын

  FYI, Mbps is megabits per second. So 500 Mbps is about 50 MBps (megaBytes per second). It's been a long time, but I think a byte is still 8 bits but there is some overhead. So, about ten to one. Edited to add: Thanks for the great video. I think you may have solved a problem for a friend fo mine.

• 
  @DIYBRY15 сағат бұрын

  @@ChrisDoutre yes. Megabytes comes out after I was an iPod sales dude years ago. But yes, Internet speeds, in this case, are measured in bits.

• 
  @robertfreese435617 сағат бұрын

  If it was important to be on the truck it would be made of a more durable material and not some crap that absorbs water and deteriorates over a short time

• 
  @CarlosGarcia-ls4hn21 сағат бұрын

  Even after switching the breaker to off, a good safety practice is to use a multi meter or voltage tester to ensure that the current is off. This is because some lights might be in a different circuit. You should not assume that power has been cut off.

• 
  @DIYBRY17 сағат бұрын

  @@CarlosGarcia-ls4hn Thanks for the information for the community.

• 
  @paulschrickel97973 күн бұрын

  Thanks for the video! I bought a 3rd party replacement shield from Amazon and went to install it but it looks like I'm missing a part that is needed to be able to bolt the shield to the frame. It must have fallen off when that part of my original shield ripped. I've attached a few photo link. The part is a metal clip that goes on each of the two rear brackets that you thread the bolt through and this keeps the bolt in place. Does anyone know what this is called and/or the part number? Thanks in advance! drive.google.com/file/d/136RX6GHAVX0OTZ7FZkxUcV7b_2uwqvxk/view?usp=drive_link

• 
  @DIYBRY3 күн бұрын

  @@paulschrickel9797 this might work for you: amzn.to/3RXamS9

• 
  @HerVibesDivine5 күн бұрын

  Just bought 3 of these. Can we see how they came back for the season?

• 
  @DIYBRY5 күн бұрын

  @@HerVibesDivine I can’t share pictures in the KZread comments. There is no option to upload a photo. But right not it is growing. The shoots won’t coming until probably end of August.

• 
  @HerVibesDivine5 күн бұрын

  @@DIYBRY ok thank you! I Wonder if mine will make shoots I guess.timw will tell

• 
  @DIYBRY5 күн бұрын

  @@HerVibesDivine They will later in the season. Mind end up reaching up to my two story window some years.

• 
  @lostinmyspace49106 күн бұрын

  That's nothing but a pain in the butt everytime you have to change the oil. off and on, off and on, off an on. I took mine off and never looked back.

• 
  @DIYBRY6 күн бұрын

  @@lostinmyspace4910 You do you.

• 
  @oscargo297 күн бұрын

  Great job 👍 Thanks for sharing.

• 
  @DIYBRY7 күн бұрын

  @@oscargo29 Thanks for watching! Subscribe! 😎

• 
  @paulgriego13467 күн бұрын

  I was starting to get frustrated!! Thanks for the tip!! Fixed my issue!!

• 
  @DIYBRY7 күн бұрын

  Glad to help. Hopefully is was good enough to earn a new subscriber 😉

• 
  @tradingcomparisons65918 күн бұрын

  I got a new 2021 m1 2 years ago and was hoping i could use my old iMac as a screen. Tried everything. I can get my iMac to run on my MacBook but not MacBook to iMac. So sad

• 
  @DIYBRY8 күн бұрын

  I know, right? Apple stopped that ability to use iMacs just as a monitor a few years back. Just a way for them to force you to upgrade.

• 
  @tradingcomparisons65918 күн бұрын

  @@DIYBRY whats weird is i can use both ipads but not imac? Makes no sense.

• 
  @DIYBRY8 күн бұрын

  @@tradingcomparisons6591 I agree. My iMac is a 5K monitor. I had to get another monitor that was 4K and is not nearly as nice because of this.

• 
  @bigrat51019 күн бұрын

  Can you open outlet other places in the pantry? Or it needs to be close to there the switch is?

• 
  @DIYBRY9 күн бұрын

  Depends on how much work and repair you are willing to do.

• 
  @Angeloti80529 күн бұрын

  Thanks for this Great video. Very detailed. I came across all the issues you mentioned. The bracket didn't fit so I had to replace it with the new one. The holes on the top to secure the microwave did not align with the previous drilled holes so I had to place new ones. The most difficult part was measuring and getting the holes right where they needed to be. I missed the first time because I took exact measurements and did not take in consideration the space that the bracket was going to take when i place it behind. But i fixed that the second time so don't make the same mistake as i did.

• 
  @DIYBRY9 күн бұрын

  Glad to hear it and happy to help. Hopefully the video was great enough to earn my a new subscriber? 😎

• 
  @walterkirsch332413 күн бұрын

  You rock, Thanks so much.

• 
  @DIYBRY13 күн бұрын

  Glad to help. Hopefully rock enough for a new subscriber! 😎

• 
  @chrischavis83914 күн бұрын

  I've had my thermostat piece touching the top of the fridge for 8 hours today and im still having this issue. My freezer is freezing but the fridge is like 60 degrees.

• 
  @DIYBRY14 күн бұрын

  Is the thirmister in the clip to the top too?

• 
  @chrischavis83914 күн бұрын

  @@DIYBRY yeah

• 
  @DIYBRY14 күн бұрын

  @@chrischavis839 trying to cool on gas or electricity?

• 
  @chrischavis83914 күн бұрын

  @@DIYBRY so far just electric, it is a new unit that I just got last week. When we went to the dealership to get it the fridge was cold and it was plugged up using electricity there.

• 
  @DIYBRY14 күн бұрын

  @@chrischavis839 If that the case, I would call back up the dealer. There has to be some kind warranty on a new unit.

• 
  @jsmiles913615 күн бұрын

  You are the man!!! THANK YOU SO MUCH 🙌🙌🙌

• 
  @DIYBRY15 күн бұрын

  Glad to help! Worthy of a new subscriber I hope? 😎

• 
  @kerry909816 күн бұрын

  I have a 2013 f150 and need the U-clips that the M10 bolts screw into. I have purchased some that were only 1" total length. My factory ones are 1 & 3/16". The shorter ones will not work as they do not clear the metal bracket holes enough. Outside of grinding some material away I thought I would ask if you had a recommendation.

• 
  @DIYBRY16 күн бұрын

  I would just take to Amazon and see if you can find what you are looking for there. Here is was I found after a 5 second search: amzn.to/3xxoomo

• 
  @mrdarx934217 күн бұрын

  I thought the nighthawk system was a router?

• 
  @DIYBRY17 күн бұрын

  Router + 2 Satellites

• 
  @Mheeler6018 күн бұрын

  I bought a 2024 f150 supercrew and it does Not have any type cover below ?

• 
  @DIYBRY15 күн бұрын

  Did you buy it new?

• 
  @Mheeler6015 күн бұрын

  @@DIYBRYyes, from the dealer

• 
  @DIYBRY15 күн бұрын

  @@Mheeler60 Some models do not ship with one. I believe the Tremor does not. I’d reach back out to the dealer.

• 
  @Mheeler6014 күн бұрын

  @@DIYBRYJust now I went to a dealer, not the one I bought from (it’s 40 miles away). Looked under 2023 & 2024 models. None of those came with them either. But the off road one had a full steel plate covering the underside

• 
  @DIYBRY14 күн бұрын

  @@Mheeler60 Thanks for the information for the community.

• 
  @VahidSheydaei-dr6gn19 күн бұрын

  Awesome video

• 
  @DIYBRY19 күн бұрын

  Thanks for watching! Subscribe! 😎

• 
  @whatfreedom719 күн бұрын

  My temp thing is on the left and everyone else’s is on the right but I don’t think it matters.

• 
  @DIYBRY19 күн бұрын

  I would not see why. Just a different model perhaps.

• 
  @whatfreedom7Күн бұрын

  @@DIYBRYI found it’s only on a few models. Mine being a RM2351 is also non adjustable. That’s why mine has no temp adjustment sticker on the inside of the fridge.

• 
  @DIYBRYКүн бұрын

  @@whatfreedom7 Thank you for the information for the community.

• 
  @fattiresbigfeet826720 күн бұрын

  Thank you thank you! This worked for me!!!

• 
  @DuaneCollicott20 күн бұрын

  You rock! Mine had completely fallen out of the slider and was hanging down. What a terrible design.

• 
  @DIYBRY20 күн бұрын

  Indeed! Thanks for watching. Subscribe 😎

• 
  @skymaster948420 күн бұрын

  Just curious could you spray bedliner on a new one to make it last 🤔.

• 
  @DIYBRY20 күн бұрын

  If you try it out, let me know what you think of it.

• 
  @richvorp668622 күн бұрын

  Thanks for making the video. With the frozen union I would have taken a Sawzall at the galvanized elbow on the city side of the water supply and replaced the elbow with the back flow unit. I found Superzilla works much better on rusted threads than WD-40 and probably would have loosened the Union, but I would have replaced everything like you did anyway. Thanks

• 
  @DIYBRY22 күн бұрын

  Thanks for your inputs for the community here. I’ll check out superzilla.

• 
  @harishkorada-gr6ml22 күн бұрын

  Well done and nicely explained. Thank you.

• 
  @DIYBRY22 күн бұрын

  Glad you help! Hopefully well enough done to earn a new subscriber? 😎

• 
  @BRTbike-fz5fn25 күн бұрын

  HL3Z-7222-E steel skid pan W717461-S439 U nuts W500633-S439 Bolts. Pan usually $120-150 on oem ford sites if dealer doesent stock it.

• 
  @DIYBRY24 күн бұрын

  Here is the Amazon equivalent for what is posted above: amzn.to/3z8nzkE

• 
  @MrJavf3225 күн бұрын

  Video sucked…you didn’t show the install

• 
  @DIYBRY25 күн бұрын

  Install is just the reverse of the uninstall. White to white, black to black, ground to ground, tighten two nuts. As I always use to say…if you didn’t like my video…feel free to go make your own video. Anyways, thanks for the view and comment 😎

• 
  @aprilinniss385925 күн бұрын

  Great video!! I was searching a ton for a good solution to this problem, thank you!!

• 
  @DIYBRY25 күн бұрын

  Glad to help. Subscribe!

• 
  @BRTbike-fz5fn25 күн бұрын

  The steel Ford OEM replacement has a cutout for oil changes. I installed a Fumoto drain plug and with a short hose is zero mess. Flip the lever, drain , flip the lever back. Granted is does take a little longer to drain, but I'm never in a hurry doing oil change anyway. HL3Z-7222-E steel skid pan W717461-S439 U nuts W500633-S439 Bolts. Pan usually $120-150 on oem ford sites if dealer doesent stock it.

• 
  @casehunter837625 күн бұрын

  Where did you find a steel OEM replacement? Do you happen to have a part number? Also if you don’t mind me asking, how much was the steel? I would rather spend a little more once and be done.

• 
  @BRTbike-fz5fn25 күн бұрын

  @@casehunter8376 HL3Z-7222-E steel skid pan W717461-S439 U nuts W500633-S439 Bolts. Pan usually $120-150 on oem ford sites if dealer doesent stock it.

• 
  @DIYBRY22 күн бұрын

  amzn.to/3RuyAmE

• 
  @exciter30025 күн бұрын

  Hi, nice tutorial. This is what I'm trying to do with my house, two lights, one on each side on the garage door area. My problem is, the weatherboard makes it challenging as the lights I wanted have flat back surface. With this regard, how did you make that wall mount base for your lights? Was it something you made or bought from a hardware store and just reinforced it to your weatherboard? Please advise, thank you very much.

• 
  @DIYBRY25 күн бұрын

  The piece the light mounts to was already there in my house. Too bad KZread does not allow one to upload picture so I and the community could see what your house/situation looks like.

• 
  @orestesdd27 күн бұрын

  But how expensive is fiber? I can't afford fiber since I'm retired. Thank you for video.

• 
  @DIYBRY27 күн бұрын

  For me, fiber is less expensive and provides more speed than Comcast. If fiber is in your area, it is also likely less expensive than traditional cable and satellite companies.

• 
  @JosephTormos27 күн бұрын

  Can you dim down the light level.

• 
  @DIYBRY27 күн бұрын

  Not on the one shown

• 
  @danielfaflik454528 күн бұрын

  I use Roku streaming devices for all my TV's on three different levels. I have Comcast 1.2gig service and have a Arris S33 modem and Netgear Nighthawk RAXE300. The modem and router are in the computer room top level. I have noticed spotty service on all levels even the level where the router and modem is. Does this mean I need a mesh system?

• 
  @DIYBRY27 күн бұрын

  Mesh would provide better wifi connection home-wide that just a single router. I have a two-story home and a basement. I have all levels with a mesh system hub (router/satellite) and it work great!

• 
  @WindomRettesАй бұрын

  Hard reset solves many problems.

• 
  @DIYBRY22 күн бұрын

  Indeed

• 
  @paulpoco22Ай бұрын

  Height if moving old doorbell wiring?

• 
  @DIYBRYАй бұрын

  Height of the Ring door bell itself?

• 
  @rodneydedeaux5642Ай бұрын

  What if you have a combo modem/router (Nighthawk Cax30)? Would the mesh system still work?

• 
  @DIYBRYАй бұрын

  It would be replacing your existing modem/router because it is a modem/router.

• 
  @rodneydedeaux5642Ай бұрын

  Oooh so I do not connect the mesh router to my existing cable modem/router combo?

• 
  @rodneydedeaux5642Ай бұрын

  (MK93S) - Router + 2 Satellite Extenders I must have a different mesh situation 😊

• 
  @bleuetamoosejawАй бұрын

  Great workmanship.

• 
  @bls6835Ай бұрын

  Thank you for the idea there are no other videos like yours, we just did our fence based on your video and it is hard work but we love our yards new look.

• 
  @DIYBRYАй бұрын

  Glad you hear it worked out well for you! Hopefully the video has earned me a new subscriber 😉

• 
  @baileylarsen9517Ай бұрын

  Very helpful thanks!

• 
  @DIYBRYАй бұрын

  Glad to help! Subscribe! 😉

• 
  @TaraRollmanАй бұрын

  Maybe, just a thought. Move the trash can to the bush.

• 
  @DIYBRYАй бұрын

  My backyard is not flat otherwise I would. It might not look like it, but there’s a pretty large slope in my backyard. From the back of the house to the back of the yard is 3 1/2 drop. The ground on the sides of the house is also not flat. Garbage can would have just fallen over.

• 
  @dougs7367Ай бұрын

  I always take a pic of the wiring before removing anything so you can look at what was where in case you forget 📸

• 
  @DIYBRYАй бұрын

  In this case, I had it on video ;) But yes, taking a picture first is always a great idea. What I do for my trailer battery wiring.

• 
  @Dipp182Ай бұрын

  My devices kept swinging from satellite to satellite and wasn't stable, did you have that issue as well? If so, how was it fixed?

• 
  @DIYBRYАй бұрын

  You restart the system? It will switch to whichever satellite is closer.

• 
  @ianward4842Ай бұрын

  Mine don't got a clip, just a wire that hangs in the fridge😭

• 
  @DIYBRYАй бұрын

  You could try a generic clip: amzn.to/4bZicSH

• 
  @nottyash100Ай бұрын

  I was recently ripped off for replacing that unit item and charged over $200 dollars, by the so called technician, that local company has lost me as a customer for gouging me for an item you can get on Amazon for $10-20 dollars.

• 
  @DIYBRYАй бұрын

  Sorry to hear of that. Maybe you and I need to start going around and charging $200 to replaced capacitors. Would certainly make a lot more money that way than I am with these DIY videos on KZread. ;)

• 
  @dougs7367Ай бұрын

  @@DIYBRY Just charge $50-$100 and undercut the other guys you'll still make bank 😁

• 
  @DIYBRYАй бұрын

  @@dougs7367 You’re not wrong there. 😎

• 
  @olivierplayz7035Ай бұрын

  For multimeters, I recommend a cheap clamp meter. Kaiweets is a rebadge of white label budget multimeters (available from Amazon US), I recommend the Habotest HT206D (which is whitelabeled and rebadged under Kaiweets) which does AC and DC current, so is useful for all sorts of residential applications, including refrigeration (what you call HVAC) - the DC current feature makes it useful for automotive whereas an AC only clamp meter (most of them, incl) cannot be used as easily for cars. The HT208D is a larger alternative with a little more functionality but I have had the screens burn out if stored in temperatures above 65 degrees Celcius (150 farenheit) for weeks at a time. It does NOT have the fuses and protections that are needed for CAT III and CAT IV applications, or even really CAT II, despite being written on it that it has high voltage ratings at certain CATs, so for those applications you should really be using a name brand, such as ideally Fluke, but Klein is ok I guess too, but for your application, the budget Habotest meters would be plenty for what you need given your limited knowledge of electrical. Your recommended multimeter in the description is actually a very poor choice for HVAC as it does not have capacitance which is exactly what you are trying to measure. Hope this helps.

• 
  @DIYBRYАй бұрын

  Thanks for the information for the community.

• 
  @DIYBRYАй бұрын

  I actually picked up this one and it reads the capacitance: amzn.to/457uear

• 
  @manarwalaАй бұрын

  Don't reveal the trade secrets 😂

• 
  @father3566Ай бұрын

  That was one of the best expelling videos. Thank you

• 
  @DIYBRYАй бұрын

  Thanks for watching! Subscribe!

• 
  @steevegmtech7326Ай бұрын

  Would the capacitor prevent the compressor from running?

• 
  @DIYBRYАй бұрын

  If your AC capacitor is bad, you may notice that your air conditioner takes a long time to turn on or doesn't turn on at all. In some cases, the damage to the air conditioner's capacitor may be severe enough to prevent the compressor from starting at all.

• 
  @steevegmtech7326Ай бұрын

  @DIYBRY now when it finally turn on,would the ac be cold?

• 
  @DIYBRYАй бұрын

  @@steevegmtech7326 if everything else about the AC unit is working correctly, yes.

• 
  @eveh3841Ай бұрын

  Thanks for the refresher… quick tip…ryobi sells a rechargeable screwdriver mini drill… works wonders for screws in small areas or even general use.

• 
  @DIYBRYАй бұрын

  I do love me some Ryobi.

• 
  @joemoyer7739Ай бұрын

  the outdoor condensing unit should be blowing warm air btw

• 
  @DIYBRYАй бұрын

  Yes