Guys! This Takom has an error in positijning the scopes on the commander's cupola! Be careful! Everyone has a mistake in their buildings. Author, you also have a mistake but it's too late to correct it
@dreamzzscalemodelling4 күн бұрын
I sadly learned about the mistake just a few days after i put everything together. For any future Tigers I hopefully remember
@TheSaturnV4 күн бұрын
As this builder states, one of the periscopes in the commander's cupola should point straight ahead. It's a very simple fix to clip off the locater tab and install properly. I only repeat this because it's only an issue with the Early and Mid, the Late does not have this problem. One other mention, is that the radiators and cooling fans should be attached to the underside of the upper deck instead of going into the lower hull. It's very difficult to get them in at the right angle so the upper deck sits down all the way. If you attach them to the upper deck instead, the alignment sorts itself out better.
@dreamzzscalemodelling4 күн бұрын
I agree. The step with the radiators was a really weird choice from takom. I heard other people had similar problems with that step.
@AdamFidler-qr6pz4 күн бұрын
Move over nightshift ❤
@clowes12311 күн бұрын
The weathering an overall paint is beutiful
@dreamzzscalemodelling11 күн бұрын
Thank you very much!
@richardtallent817515 күн бұрын
Old 70s ESCI kit. Both figures, & halftrack. But tracks not "rubber band" ,as in the 70s version. Thank you. 😊
@dreamzzscalemodelling12 күн бұрын
Yep sadly nothing new and just an old kit in a new box
@BrianSanders-tn7pi23 күн бұрын
Hi. I think that you need to take a closer look at the wheels. The spokes on the wheels should face outwards. The kit is not a bad model but you need to look at the instructions more closely.
@dreamzzscalemodelling22 күн бұрын
Yep they are in the wrong way. I am not used to tanks in that scale so i did not notice at the time. But thanks for pointing it out.
@backofthefridgeguy24 күн бұрын
Tell you what, I think you should try the eduard late version. It has a full interior and an extensive PE set. Such a fun project!
@dreamzzscalemodelling24 күн бұрын
Thanks for the recommendation. From what i found online that set is a bit older and not really sold anymore. But I do have the new Takom Hetzer's too when I want to build another one in the future. Hope they are fun to built aswell.
@jermasus24 күн бұрын
A shame they decided to do the most painful way to build tracks. Their previous Tiger P 003 kit had these beautifully designed single pour gate tracks that required even less clean up than metal tracks.
@dreamzzscalemodelling24 күн бұрын
I agree. This is the part I'm least looking forward to when I start building the kit. I hope that all the parts will at least fit together well afterwards.
@76raimon25 күн бұрын
Please build this one !!!
@dreamzzscalemodelling25 күн бұрын
Its on my list. Probably after I finished the Tiger
@THX1145825 күн бұрын
Looks like a great kit, and surprisingly affordable for the amount of extra's you get.
@dreamzzscalemodelling25 күн бұрын
Agree the price is really good for what you get compared to other kits
@MrGrey-kk7ij26 күн бұрын
Очень здорово, но нихрена непонятно 😊
@muhdnadzim7850Ай бұрын
Hai...1 question...can put mg34 on cupola ?...
@dreamzzscalemodellingАй бұрын
Yes there is a MG34 for the cupola. I just kept it separate for easier painting
@muhdnadzim7850Ай бұрын
@@dreamzzscalemodelling oh good..i just order this takom tiger otto carius..cant wait to build !..surely i will watch your video for reference
@dreamzzscalemodellingАй бұрын
@muhdnadzim7850 It is a lot of fun and a nice kit. Just watch out with air intakes blocking the hull later
@muhdnadzim785029 күн бұрын
@@dreamzzscalemodelling so...u remove the air intake ?
@dreamzzscalemodelling29 күн бұрын
Yes i had to remove the top most part of the air intakes inside the hull
@Yyz6167Ай бұрын
Thanks for supporting ❤. Modeller from Ukraine 🤝
@dreamzzscalemodellingАй бұрын
Your welcome. I hope F16's will very soon protect your skies!
@daveybyrden3936Ай бұрын
At 20:25 you tell us to keep the two small notches at the sides. Why is that? On the real tank, that is a locking ring, so it can be tightened up to any angle you like. Does the kit require the notches to be in a specific place?
@dreamzzscalemodellingАй бұрын
You seem to know more about Tigers then me. Every model kit i saw had the two notches at the side so i just assumed thats how the barrel had to be oriented. But i guess it can be in any rotarion then, so thank you for the heads up :)
@inktmeer5428Ай бұрын
The armoured covers on the exhaust are in the video upside down. When you put the shroud over them the will not fit. The lifting pegs should be lower. When you turn them around it will be ok. Intresting and great video.
@dreamzzscalemodellingАй бұрын
Good eyes! I already noticed the error during construction and flipped them, but forgot to show it. But thanks regardless for the info and feedback.
@ArkansasBassManАй бұрын
This is incorrect. The lifting pegs are actually on the higher side. Even Tiger 131 has them up higher. The way DSM has them on in his video is correct. Maybe there is an issue with the kit's fitment? But every picture I've seen of a Tiger 1 or 2 that has the pegs has them on the top half not lower.
@brianhurley6289Ай бұрын
Turret commader's visors are wrong way around. One should be pointing straight forward.
@dreamzzscalemodellingАй бұрын
Yes. Like i said its a design error by Takom that I would have fixed if i knew earlier.
@henrikb.wieder6044Ай бұрын
Great video, I am in the middle of building one of the other once, and have had the same issues :-), missing instruction on the grill and the also had to cut the fuel tank top away. Nice to see that I am not the only one with the issues. Great watching, keep it up.
@dreamzzscalemodellingАй бұрын
Thank you! It really is a shame that a recently released kit like that has such big errors. That probably means that all other Tigers based on this tool have the same issues as well. I hope the rest goes smoothly for you and enjoy building!
@davidstone-haigh4880Ай бұрын
Just found your channel. Top vid/build. Great explanation of the track build part. Is the track jig you use commercially available?
@dreamzzscalemodellingАй бұрын
Thank you so much. The big jig is from the online store fantasywelt. But im sure you can find it at different places too
@gergoszabo6432Ай бұрын
Bro is using Night Shift music, but that's not a problem! Nice build man. Keep it up!
@dreamzzscalemodellingАй бұрын
Thank you! I know Quincas Moreira just makes really chill BGM
@paulmanuse2353Ай бұрын
Very clean build! Thanks for the, things to watch out for,.
@dreamzzscalemodellingАй бұрын
Thanks!
@SerbanChiribauАй бұрын
Your explanation was very well done!👍
@dreamzzscalemodellingАй бұрын
Thank you!
@samsungtab6877Ай бұрын
👍
@dreamzzscalemodellingАй бұрын
😀
@user-cf2qv3zi4nАй бұрын
Всё хорошо сделано, трос -недостаток, трос так не с вернешь, и мешки если не привязать слетели бы
@zulerodoeht329Ай бұрын
Great build, nice kit. You mentioned the Jagdpanther, warning the Meng Panther / Jagdpanther tracks require you to glue the guide horns (2 each link) onto each track. I have built 2 Meng Panthers. Set aside some time.
@dreamzzscalemodellingАй бұрын
Thank you! I am currently working on the new Takom Tiger I, which also has separate guide horns. At least they are designed in a way that you can attach multiple at once. But it still took a lot of time and patience
@hattrick86842 ай бұрын
The AK pencils are great for exhaust. I spend way too much time on exhaust lol. Last set I did I spend 3-4hrs alone on that. At least that one could be seen. First exhaust I did was about 2hrs work and had a cover that hide it entirely.
@dreamzzscalemodelling2 ай бұрын
Carefully building and painting parts and then covering them happens so often. At least we ourself know how much time we spend on certain parts even if others wont ever see them
@hattrick86842 ай бұрын
I have a hard time with figures. I haven’t used any really in any of my builds but I paint them for practice. Sprues and Brews has a good figure tutorial if you haven’t seen it, similar to your method. That’s what I try to do anyway. Watch a bunch of different ways to do something and try to figure out a mixture that works for me. I like the airbrush idea for speckling, I’ll have to give that a try.
@dreamzzscalemodelling2 ай бұрын
I watched Sprues and Brews and Nightshift to get an idea how to paint figures. Watching different people and their techniques is a really good way to learn a bunch of things to try out yourself
@hattrick86842 ай бұрын
Border has a really good kit out, their early version. Honestly I just assume all Border/RFM/Takom and most Dragon kits are all top tier. At least every kit from the first three I have seen are and most from dragon I have seen are.
@dreamzzscalemodelling2 ай бұрын
I can only agree. Most new releases these days have a really high quality. Its a huge difference to any model kits released 30 or 40 years ago what even cheap kits can achieve today.
@hattrick86842 ай бұрын
@@dreamzzscalemodelling I just built Tamiyas Panther A, I believe it’s a 70’s tooling. Light years difference between that and other kits I have. A lot of fun though. Made me scratch build to compensate for shortcomings
@dreamzzscalemodelling2 ай бұрын
The Panther A i also have on my shelf waiting to be built. Cant go wrong with a Tamiya kit even the older ones and scratch built upgrades are always a good idea
@leecptinf2 ай бұрын
This is just what I was looking for. Well done.
@dreamzzscalemodelling2 ай бұрын
Thank you! Happy I could help
@user-qb8nd5bx3p2 ай бұрын
Nice work man How did you glue the track after all those painting ? Is there some special glue?
@dreamzzscalemodelling2 ай бұрын
Thanks! Whenever I have to glue painted parts I use regular cheap super glue
@red_3352 ай бұрын
Nice job as always! 😊
@dreamzzscalemodelling2 ай бұрын
Thanks :)
@stanisawbomba30623 ай бұрын
Good and beautiful work! I learned a lot, for which I am very grateful. After thinking about it, I see some inconsistency - there is mud on the armor and fenders, but not on the tracks.
@dreamzzscalemodelling3 ай бұрын
Thank you very much! The tracks received the same mud splatter effect like the rest. I just did not film it. But they are not that muddy in general like they could be i agree.
@garikhanchet46883 ай бұрын
*Promosm*
@filippopulitano-kk6gu3 ай бұрын
Is this a model of a REAL tank?
@dreamzzscalemodelling3 ай бұрын
No. There was never a 10,5cm King Tiger. Only the hull and turret is real. Not the gun itself
@filippopulitano-kk6gu3 ай бұрын
@@dreamzzscalemodelling ok,TANK you for answering me
@andyspilioe69093 ай бұрын
If someone is not into « what if » véhicules can you confirm that you can opt to use the 88mm barrel and instead model it as a King Tiger Porsche turret 1944 with zimmerit? Many thanks.
@dreamzzscalemodelling3 ай бұрын
I just took a closer look at the instructions for you. You have the option to add all three included barrels. The metal one which is 10,5cm and two plastic ones. Both plastic ones are smaller so these should be the 88mm guns. A smaller gun-mantle for both of them is also included according to the instructions. I hope i could help you :)
@raymondserafin93963 ай бұрын
Great job, really?Like the camouflage.You paintdiarrhea and the mud was excellent.Keep up the good work
@dreamzzscalemodelling3 ай бұрын
Thank you very much. Trying out to do the mud with pigments this times worked really good
@AdamWeber-pi1gs3 ай бұрын
I have the late variant version of this kit, your video will come in handy. Well done, Sir. Uncle Martin from Night Shift is the Man!
@dreamzzscalemodelling3 ай бұрын
Thanks and good luck with your kit! Indeed. Night Shifts videos are great to learn new techniques
@joesanchez9793 ай бұрын
I guessed right 😊
@red_3354 ай бұрын
Hi, how many coats of gloss varnish do I need to apply before weathering? :) And also, can I use acrylic paint over gloss varnish if I want to fix anything? Thx in advance
@dreamzzscalemodelling4 ай бұрын
I usually go with one. I never had problems with acrylic paints over a gloss layer so that should probably work fine
@red_3354 ай бұрын
@@dreamzzscalemodelling all right. Thanks again for your reply, I troubled you a lot 😂
@dreamzzscalemodelling4 ай бұрын
Dont worry about it, I am always happy when I can help u. And also KZread really likes videos that get comments so you are helping me grow the channel in return :)
@nagyabajusz4 ай бұрын
This is originally an ICM kit, there always problems with gaps 🙂. I try build the new zvezda T34 kits soon. Good video anyway.
@dreamzzscalemodelling4 ай бұрын
Thanks :) Good luck and fun with your kit! What kind of T-34 variant are you planning to build?
@alittleatinyatiny18214 ай бұрын
My last name is Abrams!
@dreamzzscalemodelling4 ай бұрын
Thats a funny coincidence
@red_3354 ай бұрын
Me again. 😅 I started masking and painting, just finished my first coat of green. Do you wait 24h for the second coat or we can apply second coat after a few hours?
@dreamzzscalemodelling4 ай бұрын
If you want to apply the same color over the same mask i usually dont wait beacuse the parts i started with are dry after i gave everything one coat. If you want to apply a new color and new masking over the previous one i wait about an hour usually
@red_3354 ай бұрын
@@dreamzzscalemodelling understand. Thanks :) cheers.. Can't wait for your new video
@red_3354 ай бұрын
Can you please recommend any other paint for wash, instead of brown wash, also from abteilung 502? My store has everything else, only brown wash is sold out 😅
@dreamzzscalemodelling4 ай бұрын
I am sure almost all brown colors work for that. Maybe you could try Burnt Umber or Sepia.
@red_3354 ай бұрын
@@dreamzzscalemodelling I was thinking too that I could use sepia, since the color is very similar. Thank you for your reply 😊
@johncrimmins15404 ай бұрын
I just finished that model a month ago. You did a very nice job on yours. Happy modeling !😊
@dreamzzscalemodelling4 ай бұрын
Thank you very much! Did u use the same 37mm gun as I or the M1914 machine gun in the turret?
@johncrimmins15404 ай бұрын
I did use the same gun as you did. great minds think alike. I used Tamiya paints on mine. just like them I guess@@dreamzzscalemodelling
@dreamzzscalemodelling4 ай бұрын
@@johncrimmins1540 never used Tamiya paints myself, but they have to be good looking at how popular they are
@johncrimmins15404 ай бұрын
not as many colors as some brands. The are so nice to spray with either acrylic or lacquer thinner. Not so good for brush painting some of us have found@@dreamzzscalemodelling
@calvingifford94424 ай бұрын
Very nice review! Thank you!
@calvingifford94424 ай бұрын
Nice review. Thanks for sharing!
@red_3354 ай бұрын
Really nice sir.. Tiger I maybe as the next project? Some snow environment.. Just ideas :D
@dreamzzscalemodelling4 ай бұрын
Thank you :) I thought about it too. I have ordered the three brand new Takom Tigers that are awaiting arrival. Depending on when I can get them, they could be the next project or the one after that.
Пікірлер
Guys! This Takom has an error in positijning the scopes on the commander's cupola! Be careful! Everyone has a mistake in their buildings. Author, you also have a mistake but it's too late to correct it
I sadly learned about the mistake just a few days after i put everything together. For any future Tigers I hopefully remember
As this builder states, one of the periscopes in the commander's cupola should point straight ahead. It's a very simple fix to clip off the locater tab and install properly. I only repeat this because it's only an issue with the Early and Mid, the Late does not have this problem. One other mention, is that the radiators and cooling fans should be attached to the underside of the upper deck instead of going into the lower hull. It's very difficult to get them in at the right angle so the upper deck sits down all the way. If you attach them to the upper deck instead, the alignment sorts itself out better.
I agree. The step with the radiators was a really weird choice from takom. I heard other people had similar problems with that step.
Move over nightshift ❤
The weathering an overall paint is beutiful
Thank you very much!
Old 70s ESCI kit. Both figures, & halftrack. But tracks not "rubber band" ,as in the 70s version. Thank you. 😊
Yep sadly nothing new and just an old kit in a new box
Hi. I think that you need to take a closer look at the wheels. The spokes on the wheels should face outwards. The kit is not a bad model but you need to look at the instructions more closely.
Yep they are in the wrong way. I am not used to tanks in that scale so i did not notice at the time. But thanks for pointing it out.
Tell you what, I think you should try the eduard late version. It has a full interior and an extensive PE set. Such a fun project!
Thanks for the recommendation. From what i found online that set is a bit older and not really sold anymore. But I do have the new Takom Hetzer's too when I want to build another one in the future. Hope they are fun to built aswell.
A shame they decided to do the most painful way to build tracks. Their previous Tiger P 003 kit had these beautifully designed single pour gate tracks that required even less clean up than metal tracks.
I agree. This is the part I'm least looking forward to when I start building the kit. I hope that all the parts will at least fit together well afterwards.
Please build this one !!!
Its on my list. Probably after I finished the Tiger
Looks like a great kit, and surprisingly affordable for the amount of extra's you get.
Agree the price is really good for what you get compared to other kits
Очень здорово, но нихрена непонятно 😊
Hai...1 question...can put mg34 on cupola ?...
Yes there is a MG34 for the cupola. I just kept it separate for easier painting
@@dreamzzscalemodelling oh good..i just order this takom tiger otto carius..cant wait to build !..surely i will watch your video for reference
@muhdnadzim7850 It is a lot of fun and a nice kit. Just watch out with air intakes blocking the hull later
@@dreamzzscalemodelling so...u remove the air intake ?
Yes i had to remove the top most part of the air intakes inside the hull
Thanks for supporting ❤. Modeller from Ukraine 🤝
Your welcome. I hope F16's will very soon protect your skies!
At 20:25 you tell us to keep the two small notches at the sides. Why is that? On the real tank, that is a locking ring, so it can be tightened up to any angle you like. Does the kit require the notches to be in a specific place?
You seem to know more about Tigers then me. Every model kit i saw had the two notches at the side so i just assumed thats how the barrel had to be oriented. But i guess it can be in any rotarion then, so thank you for the heads up :)
The armoured covers on the exhaust are in the video upside down. When you put the shroud over them the will not fit. The lifting pegs should be lower. When you turn them around it will be ok. Intresting and great video.
Good eyes! I already noticed the error during construction and flipped them, but forgot to show it. But thanks regardless for the info and feedback.
This is incorrect. The lifting pegs are actually on the higher side. Even Tiger 131 has them up higher. The way DSM has them on in his video is correct. Maybe there is an issue with the kit's fitment? But every picture I've seen of a Tiger 1 or 2 that has the pegs has them on the top half not lower.
Turret commader's visors are wrong way around. One should be pointing straight forward.
Yes. Like i said its a design error by Takom that I would have fixed if i knew earlier.
Great video, I am in the middle of building one of the other once, and have had the same issues :-), missing instruction on the grill and the also had to cut the fuel tank top away. Nice to see that I am not the only one with the issues. Great watching, keep it up.
Thank you! It really is a shame that a recently released kit like that has such big errors. That probably means that all other Tigers based on this tool have the same issues as well. I hope the rest goes smoothly for you and enjoy building!
Just found your channel. Top vid/build. Great explanation of the track build part. Is the track jig you use commercially available?
Thank you so much. The big jig is from the online store fantasywelt. But im sure you can find it at different places too
Bro is using Night Shift music, but that's not a problem! Nice build man. Keep it up!
Thank you! I know Quincas Moreira just makes really chill BGM
Very clean build! Thanks for the, things to watch out for,.
Thanks!
Your explanation was very well done!👍
Thank you!
👍
😀
Всё хорошо сделано, трос -недостаток, трос так не с вернешь, и мешки если не привязать слетели бы
Great build, nice kit. You mentioned the Jagdpanther, warning the Meng Panther / Jagdpanther tracks require you to glue the guide horns (2 each link) onto each track. I have built 2 Meng Panthers. Set aside some time.
Thank you! I am currently working on the new Takom Tiger I, which also has separate guide horns. At least they are designed in a way that you can attach multiple at once. But it still took a lot of time and patience
The AK pencils are great for exhaust. I spend way too much time on exhaust lol. Last set I did I spend 3-4hrs alone on that. At least that one could be seen. First exhaust I did was about 2hrs work and had a cover that hide it entirely.
Carefully building and painting parts and then covering them happens so often. At least we ourself know how much time we spend on certain parts even if others wont ever see them
I have a hard time with figures. I haven’t used any really in any of my builds but I paint them for practice. Sprues and Brews has a good figure tutorial if you haven’t seen it, similar to your method. That’s what I try to do anyway. Watch a bunch of different ways to do something and try to figure out a mixture that works for me. I like the airbrush idea for speckling, I’ll have to give that a try.
I watched Sprues and Brews and Nightshift to get an idea how to paint figures. Watching different people and their techniques is a really good way to learn a bunch of things to try out yourself
Border has a really good kit out, their early version. Honestly I just assume all Border/RFM/Takom and most Dragon kits are all top tier. At least every kit from the first three I have seen are and most from dragon I have seen are.
I can only agree. Most new releases these days have a really high quality. Its a huge difference to any model kits released 30 or 40 years ago what even cheap kits can achieve today.
@@dreamzzscalemodelling I just built Tamiyas Panther A, I believe it’s a 70’s tooling. Light years difference between that and other kits I have. A lot of fun though. Made me scratch build to compensate for shortcomings
The Panther A i also have on my shelf waiting to be built. Cant go wrong with a Tamiya kit even the older ones and scratch built upgrades are always a good idea
This is just what I was looking for. Well done.
Thank you! Happy I could help
Nice work man How did you glue the track after all those painting ? Is there some special glue?
Thanks! Whenever I have to glue painted parts I use regular cheap super glue
Nice job as always! 😊
Thanks :)
Good and beautiful work! I learned a lot, for which I am very grateful. After thinking about it, I see some inconsistency - there is mud on the armor and fenders, but not on the tracks.
Thank you very much! The tracks received the same mud splatter effect like the rest. I just did not film it. But they are not that muddy in general like they could be i agree.
*Promosm*
Is this a model of a REAL tank?
No. There was never a 10,5cm King Tiger. Only the hull and turret is real. Not the gun itself
@@dreamzzscalemodelling ok,TANK you for answering me
If someone is not into « what if » véhicules can you confirm that you can opt to use the 88mm barrel and instead model it as a King Tiger Porsche turret 1944 with zimmerit? Many thanks.
I just took a closer look at the instructions for you. You have the option to add all three included barrels. The metal one which is 10,5cm and two plastic ones. Both plastic ones are smaller so these should be the 88mm guns. A smaller gun-mantle for both of them is also included according to the instructions. I hope i could help you :)
Great job, really?Like the camouflage.You paintdiarrhea and the mud was excellent.Keep up the good work
Thank you very much. Trying out to do the mud with pigments this times worked really good
I have the late variant version of this kit, your video will come in handy. Well done, Sir. Uncle Martin from Night Shift is the Man!
Thanks and good luck with your kit! Indeed. Night Shifts videos are great to learn new techniques
I guessed right 😊
Hi, how many coats of gloss varnish do I need to apply before weathering? :) And also, can I use acrylic paint over gloss varnish if I want to fix anything? Thx in advance
I usually go with one. I never had problems with acrylic paints over a gloss layer so that should probably work fine
@@dreamzzscalemodelling all right. Thanks again for your reply, I troubled you a lot 😂
Dont worry about it, I am always happy when I can help u. And also KZread really likes videos that get comments so you are helping me grow the channel in return :)
This is originally an ICM kit, there always problems with gaps 🙂. I try build the new zvezda T34 kits soon. Good video anyway.
Thanks :) Good luck and fun with your kit! What kind of T-34 variant are you planning to build?
My last name is Abrams!
Thats a funny coincidence
Me again. 😅 I started masking and painting, just finished my first coat of green. Do you wait 24h for the second coat or we can apply second coat after a few hours?
If you want to apply the same color over the same mask i usually dont wait beacuse the parts i started with are dry after i gave everything one coat. If you want to apply a new color and new masking over the previous one i wait about an hour usually
@@dreamzzscalemodelling understand. Thanks :) cheers.. Can't wait for your new video
Can you please recommend any other paint for wash, instead of brown wash, also from abteilung 502? My store has everything else, only brown wash is sold out 😅
I am sure almost all brown colors work for that. Maybe you could try Burnt Umber or Sepia.
@@dreamzzscalemodelling I was thinking too that I could use sepia, since the color is very similar. Thank you for your reply 😊
I just finished that model a month ago. You did a very nice job on yours. Happy modeling !😊
Thank you very much! Did u use the same 37mm gun as I or the M1914 machine gun in the turret?
I did use the same gun as you did. great minds think alike. I used Tamiya paints on mine. just like them I guess@@dreamzzscalemodelling
@@johncrimmins1540 never used Tamiya paints myself, but they have to be good looking at how popular they are
not as many colors as some brands. The are so nice to spray with either acrylic or lacquer thinner. Not so good for brush painting some of us have found@@dreamzzscalemodelling
Very nice review! Thank you!
Nice review. Thanks for sharing!
Really nice sir.. Tiger I maybe as the next project? Some snow environment.. Just ideas :D
Thank you :) I thought about it too. I have ordered the three brand new Takom Tigers that are awaiting arrival. Depending on when I can get them, they could be the next project or the one after that.
@@dreamzzscalemodelling cool, can't wait!
Looks cool.
Thank you!