Where do you buy the bezel for the Citizen Promaster?
@jtr15919 күн бұрын
Hi! You can buy the bezel inserts from any place that sells SXK007 bezel inserts. AliExpress for example.
@Mangsaab195427 күн бұрын
No patter, no matter.
@ikaraca28 күн бұрын
How do you guarantee the water resistance after replacing the crystal?
@jtr15927 күн бұрын
Good question. I slam it against the table a few times and listen to the sound it makes to hear whether there are any gaps in the seals.
@gabrielpacheco139Ай бұрын
Where I can send my watch to replace the bezel if I don’t want to do it by myself?
@jtr159Ай бұрын
I'm sure if you just get the necessary parts (bezel + adhesive) any local watchmaker should be able to take care of it no problem.
@user-jk4oz2eo9wАй бұрын
HEY #mamacoo I have been watching you for years and im so proud of where you have made it! I love you so much! Also thanks for making my day <3
@jtr159Ай бұрын
Who tf is mamacoo
@dimitardimitrov5366Ай бұрын
Awesome! Exactly what I was looking for!
@tikkathreebarrelsАй бұрын
The new crystal with blue AR, that doesn't degrade the solar performance of the watch?
@jtr159Ай бұрын
Excellent question - I'd say definitely not, at least based on the performance so far. Has been holding a charge just fine.
@bmxtime89Ай бұрын
Do you know where I can find a crystal gasket for this one? Somehow it popped out and pinched when I was popping out the old crystal 😢
@anotherwatchАй бұрын
Very nice. I have 3 Pro Masters and I love them. Where do you get the Jubilee bracelet from?
@jtr159Ай бұрын
It's from LongIslandWatch.com.
@kenamaro394216 күн бұрын
@@jtr159 I have the BNO 150 Promaster. I bought the oyster style bracelet from Long Island Watch. Really nice, dresses up the watch, brushing matches to a "T" and the end links fit perfectly.
@MrAlternationАй бұрын
i bought a Uperfect portable monitor, will this method work?
@klapsi2Ай бұрын
Nice Video 💪🏼 What messurments does the crystal have? 30.8 x 2.8mm?
@jtr159Ай бұрын
Thanks! Yeah 30.8mm diameter and ~2.9mm edge thickness. 2.8 is surely OK too
@MrVM412 ай бұрын
Where do you get the glass press from? Thanks
@jtr159Ай бұрын
Hi! It's from ebay, just one of the $20 ones that come with a set of different size pads.
@cedricduyongco2 ай бұрын
Did i get it right? You pushed the old crystal from the top? I normally push from the back popping the crystal out in the front.
@neilcharles25202 ай бұрын
I have had mine for 30 years,i have the one made for small wrist,very rare..took it to my jeweler for a battery change yesterday,he said parts are not available for these watches anymore,but it's in perfect condition,just don't use in water...which i have not in 15 years..$54.00 for the battery/labor...which took less than 3 minutes....The original battery lasted about 7 years..
@jtr1592 ай бұрын
Nice! Glad to hear you're taking good care of your watch, they're becoming increasingly rare.
@colpidanovanta2 ай бұрын
Can you tell me the nsme of the beauty belt with fish. I like it
@jtr1592 ай бұрын
Hi! It's a generic silicone rubber diver strap from ebay. I think you can easily find them there but most lack in the dolphin department.
@SwapBR2 ай бұрын
Hi man, great by the way. Do you know if it is possible to exchange the ny0040 bezel for the ny0085?
@jtr1592 ай бұрын
I think so but I'm not entirely sure. The watches look identical in terms of size.
@SwapBR2 ай бұрын
@@jtr159 Okay man, thanks!
@srdy91772 ай бұрын
Big scratches from the metal screwdriver… 😢
@simpix76833 ай бұрын
I have this watch. Thank you for showing how the bezel can be changed. Purely subjective, but I prefer the look of the original to the new blue/red bezel you made. Good luck with your channel.
@jtr1593 ай бұрын
Thanks for the comment! The original bezel looks nice indeed, but I found it clashing a bit with the dial now, as the blue AR coating of the new crystal (which I installed in the earlier video) makes the dial lighter red than it originally is. The new bezel sort of helps with this, as it matches the blue reflections of the new crystal. That said, it needs to be viewed in sunlight to really match - here's hoping summer arrives soon ;)
@jhonsenliandi13 ай бұрын
open caseback just use ball ? is possible ?
@jtr1593 ай бұрын
Yes! It's a special rubber ball for this purpose. It's extremely good because there's absolutely no potentia to scratch the watch with a rubber ball.
@fridusrodrigo3 ай бұрын
Hello my friend! I am from Brazil. I want to change the bezel on my watch, but I don't know how to do it and I can't find a part. can you help me?
@fridusrodrigo3 ай бұрын
The model is at0719 55e
@jtr1593 ай бұрын
Hi friend! It might very well be possible, if you measure the inner and outer diameters of the bezel insert and find a suitable match for some other watch.
@user-ou8pv3qq2l3 ай бұрын
I bought this popular video watch from NKUWAN , which was originally priced at a few thousand dollars, but now it's only $380! It's really suitable to pick up feces!
@user-yc1wi9de3t3 ай бұрын
It's good to reward ourselves sometimes . While I'm not one to spend on high-end watch (I spend too much money on travel, lol), I can appreciate your gorgeous and timeless watch. I love how it's a symbol of all your hard work.And i choose NKUWAN every time honestly
@jtr1593 ай бұрын
🚀🚀🚀CITIZEN🚀🚀🚀
@Jackonda213 ай бұрын
It's amazing work! Respect!
@Jackonda213 ай бұрын
Very lovely watch it's my dream with sapphire crystal
@jtr1593 ай бұрын
It truly gets the most wrist time out of my watches!
@kenamaro39423 ай бұрын
Well done!
@jtr1593 ай бұрын
Thank you! Appreciate it
@marioalfeucarvalho61333 ай бұрын
Will you put mineral oil inside for less reflex?
@jtr1593 ай бұрын
Brilliant idea! Let's see
@user-fu1yp6lq2c4 ай бұрын
NKUWAN 's watches are worth it!
@jtr1594 ай бұрын
Aight bossman! I don't know who that is.
@alejandro35474 ай бұрын
For me is better to put the sticker when the bezel is on the watch to try to have it as adjuster as possible to the center
@jtr1594 ай бұрын
Oh yeah that's a great idea! Exactly what I did in the video too ;)
@JC-XL4 ай бұрын
Beautiful result
@stefpix4 ай бұрын
Great video. Too bad that the sapphire is domed. Flat crystals look better and have less reflections
@jtr1594 ай бұрын
Great point, I'm sure with the dimensions it may be possible to find a flat one.
@Danilo-jx8du4 ай бұрын
My friend how much is the sapphire glass for this watch?
@jtr1594 ай бұрын
The one I bought was like $30 on AliExpress. Link is in the description.
@bozosni5 ай бұрын
That's exactly what i was thinking about to refresh for a while the looks of my ny0040. I think it's a nice outcome. Mine has black dial.
@xboxice20055 ай бұрын
what's the difference between them both?
@jtr1595 ай бұрын
Bigger screen, more smooth operation (especially with android auto and carplay)
@vr6trooper5 ай бұрын
Oh wow I bet that glass would look great on a Pepsi dial
@tomskimcdouglegaming8065 ай бұрын
That dust you left inside the glass would drive me nuts.
@OscarOSullivan5 ай бұрын
Me as well
@PoppysGuitar5 ай бұрын
Great video and I fixed my watch. Now how do I set this damn thing? Especially the red dive hands. This watch is a fantastic watch love it.
@franciscozaragoza71935 ай бұрын
What are the measurements of the bezel insert
@CarstenMK6 ай бұрын
There’s no “how to” 🤷🏻♂️ Doesn’t help at all 👎👎
@user-cm3sg5sb8k6 ай бұрын
Пыль осталась под стеклом.
@jtr1596 ай бұрын
пыль, должно быть, в твоих глазах, мой друг
@xtianinu06 ай бұрын
This week I found this watch on my father's stuff, which seems to be from the 90`. Thanks to your video I was able to open it and change the battery, now it works fine. And I have a new watch for my collection. Cheers mate!! Merry Christmas 🎄
@jtr1596 ай бұрын
Amazing to hear! Glad it helped and you were able to get it going with a replacement battery. Merry Christmas!🎄
@edloki30576 ай бұрын
Chapter ring got mis-aligned.
@stratomix3337 ай бұрын
How do you find the part number for Citizen bezels? Where do you buy them? The 3M tape is glue?
@blinky18927 ай бұрын
Guys, how do I enter outside air mode? I can't seem to press the button farthest on the right...
@ercanertugrul38847 ай бұрын
Thank you for your sharing
@eelcob68158 ай бұрын
Thanks
@CristianCvitanic8 ай бұрын
Great video! Do you happen to know the part number for the rubber seal? I just replaced the battery by myself for the first time and would like to replace the seal before I try it in the water.
Пікірлер
I didn't know Spotify was this old...
Sure is!
I want that bezel for my BNO 150....
Where do you buy the bezel for the Citizen Promaster?
Hi! You can buy the bezel inserts from any place that sells SXK007 bezel inserts. AliExpress for example.
No patter, no matter.
How do you guarantee the water resistance after replacing the crystal?
Good question. I slam it against the table a few times and listen to the sound it makes to hear whether there are any gaps in the seals.
Where I can send my watch to replace the bezel if I don’t want to do it by myself?
I'm sure if you just get the necessary parts (bezel + adhesive) any local watchmaker should be able to take care of it no problem.
HEY #mamacoo I have been watching you for years and im so proud of where you have made it! I love you so much! Also thanks for making my day <3
Who tf is mamacoo
Awesome! Exactly what I was looking for!
The new crystal with blue AR, that doesn't degrade the solar performance of the watch?
Excellent question - I'd say definitely not, at least based on the performance so far. Has been holding a charge just fine.
Do you know where I can find a crystal gasket for this one? Somehow it popped out and pinched when I was popping out the old crystal 😢
Very nice. I have 3 Pro Masters and I love them. Where do you get the Jubilee bracelet from?
It's from LongIslandWatch.com.
@@jtr159 I have the BNO 150 Promaster. I bought the oyster style bracelet from Long Island Watch. Really nice, dresses up the watch, brushing matches to a "T" and the end links fit perfectly.
i bought a Uperfect portable monitor, will this method work?
Nice Video 💪🏼 What messurments does the crystal have? 30.8 x 2.8mm?
Thanks! Yeah 30.8mm diameter and ~2.9mm edge thickness. 2.8 is surely OK too
Where do you get the glass press from? Thanks
Hi! It's from ebay, just one of the $20 ones that come with a set of different size pads.
Did i get it right? You pushed the old crystal from the top? I normally push from the back popping the crystal out in the front.
I have had mine for 30 years,i have the one made for small wrist,very rare..took it to my jeweler for a battery change yesterday,he said parts are not available for these watches anymore,but it's in perfect condition,just don't use in water...which i have not in 15 years..$54.00 for the battery/labor...which took less than 3 minutes....The original battery lasted about 7 years..
Nice! Glad to hear you're taking good care of your watch, they're becoming increasingly rare.
Can you tell me the nsme of the beauty belt with fish. I like it
Hi! It's a generic silicone rubber diver strap from ebay. I think you can easily find them there but most lack in the dolphin department.
Hi man, great by the way. Do you know if it is possible to exchange the ny0040 bezel for the ny0085?
I think so but I'm not entirely sure. The watches look identical in terms of size.
@@jtr159 Okay man, thanks!
Big scratches from the metal screwdriver… 😢
I have this watch. Thank you for showing how the bezel can be changed. Purely subjective, but I prefer the look of the original to the new blue/red bezel you made. Good luck with your channel.
Thanks for the comment! The original bezel looks nice indeed, but I found it clashing a bit with the dial now, as the blue AR coating of the new crystal (which I installed in the earlier video) makes the dial lighter red than it originally is. The new bezel sort of helps with this, as it matches the blue reflections of the new crystal. That said, it needs to be viewed in sunlight to really match - here's hoping summer arrives soon ;)
open caseback just use ball ? is possible ?
Yes! It's a special rubber ball for this purpose. It's extremely good because there's absolutely no potentia to scratch the watch with a rubber ball.
Hello my friend! I am from Brazil. I want to change the bezel on my watch, but I don't know how to do it and I can't find a part. can you help me?
The model is at0719 55e
Hi friend! It might very well be possible, if you measure the inner and outer diameters of the bezel insert and find a suitable match for some other watch.
I bought this popular video watch from NKUWAN , which was originally priced at a few thousand dollars, but now it's only $380! It's really suitable to pick up feces!
It's good to reward ourselves sometimes . While I'm not one to spend on high-end watch (I spend too much money on travel, lol), I can appreciate your gorgeous and timeless watch. I love how it's a symbol of all your hard work.And i choose NKUWAN every time honestly
🚀🚀🚀CITIZEN🚀🚀🚀
It's amazing work! Respect!
Very lovely watch it's my dream with sapphire crystal
It truly gets the most wrist time out of my watches!
Well done!
Thank you! Appreciate it
Will you put mineral oil inside for less reflex?
Brilliant idea! Let's see
NKUWAN 's watches are worth it!
Aight bossman! I don't know who that is.
For me is better to put the sticker when the bezel is on the watch to try to have it as adjuster as possible to the center
Oh yeah that's a great idea! Exactly what I did in the video too ;)
Beautiful result
Great video. Too bad that the sapphire is domed. Flat crystals look better and have less reflections
Great point, I'm sure with the dimensions it may be possible to find a flat one.
My friend how much is the sapphire glass for this watch?
The one I bought was like $30 on AliExpress. Link is in the description.
That's exactly what i was thinking about to refresh for a while the looks of my ny0040. I think it's a nice outcome. Mine has black dial.
what's the difference between them both?
Bigger screen, more smooth operation (especially with android auto and carplay)
Oh wow I bet that glass would look great on a Pepsi dial
That dust you left inside the glass would drive me nuts.
Me as well
Great video and I fixed my watch. Now how do I set this damn thing? Especially the red dive hands. This watch is a fantastic watch love it.
What are the measurements of the bezel insert
There’s no “how to” 🤷🏻♂️ Doesn’t help at all 👎👎
Пыль осталась под стеклом.
пыль, должно быть, в твоих глазах, мой друг
This week I found this watch on my father's stuff, which seems to be from the 90`. Thanks to your video I was able to open it and change the battery, now it works fine. And I have a new watch for my collection. Cheers mate!! Merry Christmas 🎄
Amazing to hear! Glad it helped and you were able to get it going with a replacement battery. Merry Christmas!🎄
Chapter ring got mis-aligned.
How do you find the part number for Citizen bezels? Where do you buy them? The 3M tape is glue?
Guys, how do I enter outside air mode? I can't seem to press the button farthest on the right...
Thank you for your sharing
Thanks
Great video! Do you happen to know the part number for the rubber seal? I just replaced the battery by myself for the first time and would like to replace the seal before I try it in the water.
Part are not available for this watch anymore..