Пікірлер

• 
  @steamworx2 күн бұрын

  Great to see you back DreamSteam!

• 
  @dreamsteam8272Күн бұрын

  Thanks.... i was so badly out if practice, i had to restart with a beginners set 😂😂😂

• 
  @steamworxКүн бұрын

  @@dreamsteam8272 😂😂you still knocked it out of the park!! Lovely work, thanks for sharing. More please!!

• 
  @dieallrounderinAlexandra2 күн бұрын

  Moin Chris, sehr schöner Bausatz..👍 Schön ein neues Video von dir zu sehen.

• 
  @dreamsteam8272Күн бұрын

  Danke Alex, wurde auch nochmal Zeit ein bisschen an der Werkbank zu meditieren! 😂 bleib gesund! Wann geht's mit Leni weiter?

• 
  @dieallrounderinAlexandraКүн бұрын

  @@dreamsteam8272 Bin heimlich am bauen😄. Habe zwar viel aufgenommen aber nicht viel Zeit zum Video schneiden.

• 
  @MrFactotum3 күн бұрын

  hi Chris nice to see you back👍👍👍👍 i am hoping to make a stirling engine on my micro lathe this winter👍👍👍👍 regards Kev

• 
  @dreamsteam82723 күн бұрын

  Sounds great! Im looking forward to it! Thanks for passing by! Stay healthy kev!

• 
  @1.21gigawatt3 күн бұрын

  Very precise and interesting work as usual. It was so interesting to see how you pumped the water through these tiny boiler. I wonder, does it actually happen that something is put together incorrectly? Or is it easy to put it all in the right places? I guess you got to have a good sense for construction, physics and engineering in general. Nice video cutting work, too. Can't wait for the "ber-months" (September, October, November...), for it seems it's the perfect time for those works and vids. Thanks for sharing.

• 
  @dreamsteam82723 күн бұрын

  Oh, nothing is eaten as hot as it is cooked😁😂😂😂. However, I've been out of practice with the hobby and editing videos for almost a year now, so a beginner's project like this was good school again 🤣🤣🤣 The pump bottle is actually for a special valve with which you can refill the kettle with steam when it is in full operation. My funnel was too big, but the hose fit 😅 Thanks for the comment!

• 
  @user-xh5jj2xy1f12 күн бұрын

  Excellent workmanship sir and I was really surprised to you see you making this with mainly hand tools.....A lesson to us all....brilliant

• 
  @dreamsteam82723 күн бұрын

  Thanks for your nice Comment! Youre welcome!

• 
  @antoniomoura934727 күн бұрын

  Bom trabalho!

• 
  @oanhiep5074Ай бұрын

  I would like a manufacturing drawing Thank you

• 
  @dreamsteam8272Ай бұрын

  In the describtion

• 
  @AlanMerry2 ай бұрын

  Just wondering what provision you were planning for a lubricator?

• 
  @dreamsteam8272Ай бұрын

  Cylinders are made of PTFE, and no lubrication System in the plans.... maybe i will add a displacement lubricator

• 
  @happymark16683 ай бұрын

  Where can I buy this locomotive?

• 
  @dreamsteam82723 ай бұрын

  Roundhouse Engineering UK

• 
  @dunaabel56344 ай бұрын

  nice

• 
  @julias-shed4 ай бұрын

  I quite like filing too especially rounding corners 😀

• 
  @plurplursen71724 ай бұрын

  I was wondering, could you give me that skill now! Thx..

• 
  @PalmerXInc5 ай бұрын

  What gauge is the track?

• 
  @dreamsteam82725 ай бұрын

  45mm

• 
  @jeffmill26 ай бұрын

  What type or brand of silver solder did you use?

• 
  @dreamsteam82726 ай бұрын

  That depends on the job to be done. I don't have a special brand. The only important thing is if you heat components several times, that you start with a solder that melts at around 700-800 degrees. If you have to heat the component again in a further step, use a solder with a melting point of 500-600 degrees. This way you work back the number of steps so that areas that have already been soldered do not open again.

• 
  @MegaMr2006 ай бұрын

  I also hope that you will continue the steam locomotive and share it with us! Very good work so far! And I'm thinking about starting this machine as well.

• 
  @SunriseFilms767 ай бұрын

  Thanks for helping me build my own cracker. I think I'll name him Bob.

• 
  @SunriseFilms767 ай бұрын

  When are you continuing your Decauville series? I've done most of it on my own build but I don't know how to put everything together, as it doesn't say in the instructions.

• 
  @dreamsteam82727 ай бұрын

  Answers in your other comments..... Cheers ....

• 
  @SunriseFilms767 ай бұрын

  Can't open the plan on PC. Says something went wrong.

• 
  @dreamsteam82727 ай бұрын

  You need a PDF Reader... like Adobe for free

• 
  @SunriseFilms767 ай бұрын

  @@dreamsteam8272 It didn't work because my PC had like 3% battery and was trying to preserve it, so it blocked me from downloading the PDF 🤣

• 
  @SunriseFilms767 ай бұрын

  Are the plans avalible in Romanian? I don't know what half of these tools are called in Romanian and I tried to ask if the guys at my local Hornbach knew what I was talking about.

• 
  @dreamsteam82727 ай бұрын

  They are only in English

• 
  @SunriseFilms767 ай бұрын

  @@dreamsteam8272 Cool. I might just figure them myself.

• 
  @SunriseFilms767 ай бұрын

  Also, how do you "imprint" the drawings into the steel sheet? There is no way the iron can push the ink enough so that it goes through straight up steel.

• 
  @dreamsteam82727 ай бұрын

  ... it is just a Trick for the Video.... just funny....

• 
  @SunriseFilms767 ай бұрын

  It's been two years and my Decauville is sitting incomplete in my workshop every since you dropped the playlist. WHEN are you going to continue the series? It has been loads of help for me.

• 
  @dreamsteam82727 ай бұрын

  I dont really know.... understand, its my hobby... i do what i want and what i feel to... and in the moment, i do a lot of other stuff. And on the other hand, i have 2 Kids, a wife, a job, 3 houses, and a lot to do.... sorry... but i hope it continues soon.....

• 
  @SunriseFilms767 ай бұрын

  @@dreamsteam8272 Oh, shit, I didn't know that. Sorry.

• 
  @SunriseFilms767 ай бұрын

  Can you link all the tools and machines used in this playlist? Edit: I speedrunned through most of the parts using CNC.

• 
  @dreamsteam82727 ай бұрын

  I dont use cnc.... and i dont gave links for Tools. Most Tools i by in the local Hardware stores

• 
  @SunriseFilms767 ай бұрын

  Can you link the kit you built it from?

• 
  @dreamsteam82727 ай бұрын

  Its billy from Roundhouse Engineering. I dont have any relation to Theme, so i do not pist any links. You can Google Roundhouse Engineering. It is Based in UK. And billy is a kit for something about 2500 Euro

• 
  @SunriseFilms767 ай бұрын

  @@dreamsteam8272 Jesus Christ 2500 euro is more than than double the cost of the locomotive prebuilt. You got scammed, man.

• 
  @rozinant12377 ай бұрын

  Do you have plans for this loco?

• 
  @dreamsteam82727 ай бұрын

  Its Billy from Roundhouse Engineering. No plans. Sorry .... Its a kit my first loco kit

• 
  @rozinant12377 ай бұрын

  Thanks for the info!@@dreamsteam8272

• 
  @tahsinpolat57847 ай бұрын

  çok başarılı 👍

• 
  @tahsinpolat57847 ай бұрын

  süper harika

• 
  @paulsodfried24748 ай бұрын

  Geiles teil wirklich gute Arbeit 👍. Ich hab nur eine frage. Ich habe eine wilesco dampfmaschiene und ich vermute das die Leitungen mit öl etwas verstopft sind da die maschiene unter last nicht auf ihre höchste drehzahl kommt. hättest du eine Idee wie man diese wieder rein bekommt?

• 
  @dreamsteam82728 ай бұрын

  Danke! Zu deiner Frage: Wilesco ist nicht unbedingt für Ihre Power berühmt. Auf dem deutschen Spielwarenmarkt immernoch ein gutes Modell, was dampfmaschinen angeht, aber tatsächlich nur ein Spielzeug. Die Maschine ist keine Heißdampfmaschine und fährt mit etwas über 1 Bar. Der kessel ist daher weichgelötet. Das ist aus Sicherheitsgründen so, weil es eben Spielwaren sind. Wir müssen uns in der Welt des Modelldampf daran gewöhnen, das Wilesco eher drittklassig ist. Aber es sind schöne Maschinchen! So, zu deiner Frage. WD40 ist ein Entfetter! (Nicht wie einige glauben, ein Schmierstoff oder entroster...) man kann damit Öl und Fette entfernen. Als 2. Mittel empfehle ich Essigessenz! 2/3 Wasser in den kessel, 1/3 Essigessenz, und durchkochen... (löst auch den kalk) und der Kalk wird es eher sein..... Und das echte zaubermittel : heißdampföl verwenden! Und das nicht wegen der Schmierung. Heißdampföl ist in der Konsistenz wie Honig, es verliert bei Hitze und in Verbindung mit Wasser seine Viskosität nicht so schnell. Daher hat es bei dampfmaschinen auch primär eine dichtende Aufgabe, und sekundär eine Schmierende! Wilescos Zylinder sind energieverschwender, sie sind zu leichtgängig, damit sie mit Nassdampf fahren können. Hier liegt der größte Verlust, insbesondere bei den alten Maschinen. Nimm von Regner das heißdampföl und du wirst sehen das sie gleich ganz anders läuft! Wenn die Leitungen (bei wilesco aus messing verchromt) dicht sind wegen Kalk, dann nimm sie ab und gib ihnen ein essig oder Zitronensäure Bad. Zitronensäure bekommst du im DM von Gutmann zum anrühren als pulver in der Abteilung für hausgaltsreiniger. Lass mich wissen, was dir am Ende geholfen hat! Ich tippe eher auf das Öl... 😊 Grüße und schöne Adventszeit!

• 
  @paulsodfried24748 ай бұрын

  ​@@dreamsteam8272 danke für die ausführliche Erklärung.Ich werde sie einmal entkalken und wenn das nicht hilft werde ich das WD40 probieren. Ich rate mal es sollte dabei in den öler eingefüllt werden .und ich werde zum entkalken zuerst den originalen Entkalker benutzen weil ich ihn schon ein Jahr rumliegen hab und wilesco schreibt das man keinen Essig oder sonstiges verwenden soll. Danke für die Hilfe und ebenfalls schöne Adventszeit!

• 
  @chrisklevesahl59558 ай бұрын

  Are plans still available?

• 
  @dreamsteam82728 ай бұрын

  Yes, they are... look for the link in the Info Box

• 
  @UCanAlso8 ай бұрын

  great patience! no milling machine

• 
  @geoffpace898110 ай бұрын

  great work , you are patient , skillful and fastidious with you work ! I'd say museum quality , a joy to watch .Regards Geoff

• 
  @GregVirgoe10 ай бұрын

  Has this project been shelved now? What happened? Did the boiler fail pressure test and you gave up on it? Looked like a lot of work so I don't blame you. Can you give us an update please?

• 
  @dreamsteam82729 ай бұрын

  Thanks for your message, it has been shelved for a while. A lot other things comes first. Its just my hobby, and i share it if i have time to.... meanwhile i have a Family, a Job, several Houses, and a lot to do. But in the Winter time, i will find time! And if i feel to work on it, i will do.... lets see.... time will tell

• 
  @GregVirgoe9 ай бұрын

  @@dreamsteam8272 sorry I didn’t mean to put pressure on you I know what that’s like. Just curious because it’s such good content and really interested to see the rest. When you are ready of course. Best wishes 😊

• 
  @dreamsteam82729 ай бұрын

  @GregVirgoe thanks buddy! Stay healthy!

• 
  @hknokke8 күн бұрын

  @@dreamsteam8272 : I also hope that you'll find the motivation and have some spare time to finish this wonderful project. In the meantime, thanks a lot for the great content you've offered us.

• 
  @wolfblackforest393510 ай бұрын

  Schön das Einer noch so gut die Feile führen kann, CNC kann jeder!

• 
  @dreamsteam827210 ай бұрын

  Danke! Auch wenn ich es als Zimmerer nie gelernt habe. Aber, CNC hat auch seine Herausforderungen... Wenn auch hauptsächlich im Umgang mit Software, und nötigen Kleingeld für Ausrüstung. Es fühlt sich einfach gut an, etwas wirklich "selbst" zu erschaffen...

• 
  @wolfblackforest393510 ай бұрын

  ...wenn ich noch einen Tipp geben dürfte, nimm schöne Modell-Sechskantschrauben, sehen einfach besser aus als diese Inbus. Ich bau die gleiche Lok, und Du bist Schuld, hast mich infiziert! -:)

• 
  @Thewindingstairs10 ай бұрын

  Fascinating work, Brother. Thanks for the follow.

• 
  @dreamsteam827210 ай бұрын

  Hey brother, youre comment is highly appreciated! Thanks a lot!

• 
  @SB-10010 ай бұрын

  Moin, die Lok läuft super.

• 
  @dreamsteam827210 ай бұрын

  Welche? 😄

• 
  @SB-10010 ай бұрын

  @@dreamsteam8272 na, ganz genau diese Lok. Ich bin derjenige, der sie ersteigert hat.

• 
  @yichen975610 ай бұрын

  请问 Decauville 020 做完了吗

• 
  @dreamsteam82729 ай бұрын

  ?

• 
  @yichen97568 ай бұрын

  @@dreamsteam8272 Sorry, because my English is not good. I want to ask, is that 0-4-0 live steam locomotive ready?

• 
  @chiefauditor168310 ай бұрын

  The steam dome looks to be brass. If so, for anyone reading this, brass suffors dezincification and it fails. Bronze is acceptable but never brass on any bushing, or brazed component of a boiler

• 
  @dreamsteam82728 ай бұрын

  In this case, i change the parts to bronze, because of the copper boiler! but if you use a brass boiler, than you can use brass bushings! The problem with brass is only in conection to copper parts. Electrolysis does the dezincification! Many steam models come in brass, but only when they also use only brass for boilers and more!

• 
  @chiefauditor168310 ай бұрын

  Glad you changed out the brass for copper. I watched the other video and looked at the brass with concern

• 
  @shayleebell920611 ай бұрын

  plans no longer there

• 
  @dreamsteam827211 ай бұрын

  They are!!!!! www.modelesavapeur.com/telechargements5/index.html

• 
  @DerModellbauOnkel11 ай бұрын

  Impressive! Great work!

• 
  @dreamsteam827211 ай бұрын

  Danke! 😉 Aus der Eifel 😉

• 
  @rajulghadiyali1480 Жыл бұрын

  Fantastic built❤

• 
  @SteamEngines Жыл бұрын

  Thoroughly enjoyable viewing - Jim

• 
  @fransbeckman5007 Жыл бұрын

  I must ask, I don't quite understand the arrangement of the flues, why do you both have a pair of large flues (where the burners are placed?) and those smaller flues?

• 
  @dreamsteam8272 Жыл бұрын

  The small flues in the burner section get in direct contact with the flames over the burner, so they act like a super-heater. The larger ones going from the burner through the boiler, as regular smoke pipes, so that the heat from the burner goes through the boiler and through the water. If you need plans for, just send me a PM to [email protected]

• 
  @wolf50b Жыл бұрын

  Sauber Arbeit . Gutes Video. 👍

• 
  @scottwippel5007 Жыл бұрын

  I’m wanting to build or buy one just like this, so I can operate my steam engine’s !!

• 
  @dreamsteam8272 Жыл бұрын

  Hey, I cant recommend to use one of the loco style, to Operate steam Engines (Stationary) If you need plans for Boilers that used in stationary Engines, let me kniw. I can Send you a lot. In DIN A 3 PDF, all Metric

• 
  @psriram2416 Жыл бұрын

  I like your your work You are my master

• 
  @dreamsteam8272 Жыл бұрын

  Always be youre own Master!!!! 😉 Thanks!