I bought an ms170 second hand and it is stopping after I let off the trigger. I took this apart and there is no screen at all! Could this be the problem?
@user-jd7jw4zv4r4 ай бұрын
I was thinking 🤔 I would try this on my bow. I was wondering how it would work, and now I know. Thanks for testing this method for us 👍 👌
@user-pi6ws8ws5m5 ай бұрын
How I clean the cap is when the fire is out remove cap and clean with wire brushe and a stick . very easy bang the chimney a bit ,or run the chimney brush on flex pole down a couple of times , Heating with wood for over 45yrs still doing it today , plenty of wood on my property
@michaelhertzler87116 ай бұрын
God bless you. I was at my wits end too then found this. Thank you!
@falcorthewonderdog27586 ай бұрын
An old man in Montana showed me that if you burn a russet potato once a week the chemicals in the potato dry out the creosote and it flakes off and falls into the fire box. I used this method for a month and reinspected and sure enough my stove pipe was cleaned out. It actually works really good.
@beccawurfel67576 ай бұрын
Im wondering if you could help me out? We have a wood cook stove we had installed at thanksgiving time of this year. It is normal when the fire is not hot to have smoke puff out the seams of the smoke pipe? Its been in the 50s this week in Michigan and smoke is puffing out the pipe seams when we attempt to light it
@grummelameise6 ай бұрын
that means that either: the temps outside are way to warm, or your chimney, or pipe is clogged. you need to wait for cool down, then dissasemble the pipe, take it outside, and brush it out. then you need to to the same with your oven as far as you can reach, and also with the chinmney. wet wood lets soot built up in a majour way. always burn dry wood. a designated vacuum for all the dirt is very helpfull
@timesthree57576 ай бұрын
That is not unburnt powder it graphite. It used for stability and storage.
@sameasis.knownreligion7 ай бұрын
how do you operate the safety. This is the second crossbow i have had to get as the first would not load. But both 370 i picked up the safety does not work. So how does it work???
@mikebertsch87477 ай бұрын
It looks like thats whats wrong with mine, would that be why smoke was coming out of the dampers and pouring out when I opened the door?
@undergroundtomas80837 ай бұрын
Or you don't have enough draw. We have a stove at work that has a pretty short pipe and will, if you don't kindle your fire properly, not pull the smoke out and leak through the ash pan and doors... have set off alarm systems if happened with a loaded stove. It works through creating a vacuum so would also think about that...
@mikebertsch87477 ай бұрын
@@undergroundtomas8083 thank you, I cleaned out the rain cap it was clogged with creosote and now its drawing like crazy no smoke at all
@undergroundtomas80837 ай бұрын
@@mikebertsch8747 I gotta clean this weekend, supposed to be warm here so no need for the stove... just to be safe
@robertdiaz49628 ай бұрын
Im getting ready to unbox my 12 Ton BLT Manuel and you made it so easy to understand from unboxing to splitting and everything inbetween..I'll split the cuts tomorrow from the Old Oak tree that got hit by lightening on the BLT and let them season for a year...thanks for the tip on saving those xtra cuts just in case they're too short...Adois Amigo.
@michaelsilva5708 ай бұрын
Great video. I’ve been losing power for a long time. Checked the usuals, spark plug, sharpened chain and played with carby settings. Pulled this off and had same issues. Clean and running like new. Thanks for the lesson
@arcadiapermaculture9749 ай бұрын
I was also at my wits' end, until I found this video. Thanks so much for sharing.
@dboots14219 ай бұрын
Absolutely fixed a run for 10 min then shuts off problem. Tks
@wdoxsee9 ай бұрын
Great video - no annoying "music", clear concise narrative, and a gentleman who wants to inform rather than "star" in a small screen production. Thank you sir, 10 minutes after watching your video I had a saw with power again. The only change I made was to use Super DeGooper to clean the screen - it worked great, got it completely cleaned to original with the help of an old toothbrush.
@emamihaelagimpirea613610 ай бұрын
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzread.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
@danielacorrea526611 ай бұрын
I was running this saw for about 2 hours at about a 30-50% duty cycle kzread.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
@greybone77711 ай бұрын
I'm happy to see someone not punching holes on their baffle plate and throwing out their spark arrestor. Actually it's good to buy a new screen every couple of years. If the holes in the screen get too big it won't do its job and could start a fire. Forest service used to run around in the 70s with welding tip cleaners sized to check your spark arrestor screen. They would fine you or warn you if the screen was worn. Not having one in eastern Washington was a definite fine.
@Obad87 Жыл бұрын
Anyone who doesnt understand this video the difference is simple. Pull the trigger slower until you get a better feel for accuracy. Pull too fast you jerk the gun and mess up your aim till you get use to it. The speed comes later.
@elgatol4203 Жыл бұрын
Awesome
@ohmeowzer1 Жыл бұрын
Looks to cold for me..they should of called it cold montana
@MrAvidOutdoorsman Жыл бұрын
I found it easier to load it by pointing the barrel down and sorta balancing the pellet on my fingertip.
@ScottWConvid19 Жыл бұрын
Put the screen on hot coals of a fire for a minute then brush it off. Clean as new.
@paulkoppana3349 Жыл бұрын
Just what I needed, worked great thank you!!
@cynthiareyes1495 Жыл бұрын
I bought a brand new one that had leaked a lot of it's oil before I even took it out of the box.
@patrickcoyne1292 Жыл бұрын
i wonder if this is why my 2200 with only 100 hours on it is running pretty bad now. i guess i’ll have to check it out and clean this filter more frequently if that’s the case.
@ripstephenhawking87876 ай бұрын
It was for me with my brand new 2200I. Water and some crud gets into the filter and before long she's surging and hunting before dying. Trying to restart results in less and less runtime until it won't start at all.. im about to drain fuel and get the filter out and cleaned for the second time in 3 days. Guess she had more crud and water than I thought in the tank. Using a clear glass coffee pot this time to inventory the fuel as it's drained so contamination doesn't sneak back into the tank. Also.... Enjoying a great knobber from my wife while wrenching, makes chores seem to whiz by. She's great at holding tools for me look.
@johnstockburn6396 Жыл бұрын
Care in the community really does not work , what is the purpose of this ?
@rodmagee7895 Жыл бұрын
The first thing I do is remove these screens from any gas powered engine that has one.
@azclaimjumper Жыл бұрын
You must have replaced the very short green (ground) wire with a much longer green wire & not said anything about it.
@stevenkinnison8044 Жыл бұрын
I take those screens out and throw them in the trash.
@tom2868 Жыл бұрын
Well thank you very much!! I had the carb off twice and cleaned but didn't make any difference, then checked the compression, it was 150 lbs. Then I googled it and your video came up first. I cleaned my screen with a fine wire wheel on my bench grinder. What a difference 😁. It's funny how quick it started loosing power. I always use fresh premium fuel and only Stihl 2 stroke oil. My saw is about 12 years old and I was about to go get a new one. I guess I'll cancel the new carb I ordered. Thank you again.
@simontrangmar4537 Жыл бұрын
i use a blow torch ... it burns the soot off the spark arrester in literally 30 seconds... and it's fum too...grin
@classicstangbrn8964 Жыл бұрын
It works but it looks like shit.
@jkirch523 Жыл бұрын
I run these bad boys all year long 7 days a week. absolutely beasts
@jkirch523 Жыл бұрын
this is the most common issue with this gen and most others.
@dollhausenx Жыл бұрын
Thank you. Lots of people open it, but don't show how to put a pellet in. I didn't find it hard putting a pellet in but cocking it was a different matter. Ouch.
@marcosjorge5291 Жыл бұрын
Does this beast have a serial number?
@TheKnoxcountry Жыл бұрын
Great idea! Nice use of simple supply’s to get the job done 👍
@davewilsonphoto Жыл бұрын
So glad I found this video this is exactly what I needed. I used mineral spirits instead of Acetone and the carbon came off very easily
@mikesuch9021 Жыл бұрын
Every video about Garrett Montana sounds like a 5-year-old banging on a piano.
@noneckjoe948 Жыл бұрын
Perfect fix for my saw… thanks.. really helped!
@egorpirozhkov2699 Жыл бұрын
Very nice 👍
@valpauley Жыл бұрын
Thanksman
@BigAlWillis Жыл бұрын
Working on one now didn't even have a screen in there someone must have removed it but it bogs down at throttle I'm going to try to take the Jets out and clean it I clean the carburetor already but it didn't do any good
@afiffansuri60772 жыл бұрын
Terima kasih bapak
@martinquevillon8282 жыл бұрын
you are the best
@BlkwtrPrk2 жыл бұрын
Thanks! I'll try this. I have two dinged chains. Hit a rock with one and ran out of chain oil for the other.
Пікірлер
Get rid of the screen
I bought an ms170 second hand and it is stopping after I let off the trigger. I took this apart and there is no screen at all! Could this be the problem?
I was thinking 🤔 I would try this on my bow. I was wondering how it would work, and now I know. Thanks for testing this method for us 👍 👌
How I clean the cap is when the fire is out remove cap and clean with wire brushe and a stick . very easy bang the chimney a bit ,or run the chimney brush on flex pole down a couple of times , Heating with wood for over 45yrs still doing it today , plenty of wood on my property
God bless you. I was at my wits end too then found this. Thank you!
An old man in Montana showed me that if you burn a russet potato once a week the chemicals in the potato dry out the creosote and it flakes off and falls into the fire box. I used this method for a month and reinspected and sure enough my stove pipe was cleaned out. It actually works really good.
Im wondering if you could help me out? We have a wood cook stove we had installed at thanksgiving time of this year. It is normal when the fire is not hot to have smoke puff out the seams of the smoke pipe? Its been in the 50s this week in Michigan and smoke is puffing out the pipe seams when we attempt to light it
that means that either: the temps outside are way to warm, or your chimney, or pipe is clogged. you need to wait for cool down, then dissasemble the pipe, take it outside, and brush it out. then you need to to the same with your oven as far as you can reach, and also with the chinmney. wet wood lets soot built up in a majour way. always burn dry wood. a designated vacuum for all the dirt is very helpfull
That is not unburnt powder it graphite. It used for stability and storage.
how do you operate the safety. This is the second crossbow i have had to get as the first would not load. But both 370 i picked up the safety does not work. So how does it work???
It looks like thats whats wrong with mine, would that be why smoke was coming out of the dampers and pouring out when I opened the door?
Or you don't have enough draw. We have a stove at work that has a pretty short pipe and will, if you don't kindle your fire properly, not pull the smoke out and leak through the ash pan and doors... have set off alarm systems if happened with a loaded stove. It works through creating a vacuum so would also think about that...
@@undergroundtomas8083 thank you, I cleaned out the rain cap it was clogged with creosote and now its drawing like crazy no smoke at all
@@mikebertsch8747 I gotta clean this weekend, supposed to be warm here so no need for the stove... just to be safe
Im getting ready to unbox my 12 Ton BLT Manuel and you made it so easy to understand from unboxing to splitting and everything inbetween..I'll split the cuts tomorrow from the Old Oak tree that got hit by lightening on the BLT and let them season for a year...thanks for the tip on saving those xtra cuts just in case they're too short...Adois Amigo.
Great video. I’ve been losing power for a long time. Checked the usuals, spark plug, sharpened chain and played with carby settings. Pulled this off and had same issues. Clean and running like new. Thanks for the lesson
I was also at my wits' end, until I found this video. Thanks so much for sharing.
Absolutely fixed a run for 10 min then shuts off problem. Tks
Great video - no annoying "music", clear concise narrative, and a gentleman who wants to inform rather than "star" in a small screen production. Thank you sir, 10 minutes after watching your video I had a saw with power again. The only change I made was to use Super DeGooper to clean the screen - it worked great, got it completely cleaned to original with the help of an old toothbrush.
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzread.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
I was running this saw for about 2 hours at about a 30-50% duty cycle kzread.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
I'm happy to see someone not punching holes on their baffle plate and throwing out their spark arrestor. Actually it's good to buy a new screen every couple of years. If the holes in the screen get too big it won't do its job and could start a fire. Forest service used to run around in the 70s with welding tip cleaners sized to check your spark arrestor screen. They would fine you or warn you if the screen was worn. Not having one in eastern Washington was a definite fine.
Anyone who doesnt understand this video the difference is simple. Pull the trigger slower until you get a better feel for accuracy. Pull too fast you jerk the gun and mess up your aim till you get use to it. The speed comes later.
Awesome
Looks to cold for me..they should of called it cold montana
I found it easier to load it by pointing the barrel down and sorta balancing the pellet on my fingertip.
Put the screen on hot coals of a fire for a minute then brush it off. Clean as new.
Just what I needed, worked great thank you!!
I bought a brand new one that had leaked a lot of it's oil before I even took it out of the box.
i wonder if this is why my 2200 with only 100 hours on it is running pretty bad now. i guess i’ll have to check it out and clean this filter more frequently if that’s the case.
It was for me with my brand new 2200I. Water and some crud gets into the filter and before long she's surging and hunting before dying. Trying to restart results in less and less runtime until it won't start at all.. im about to drain fuel and get the filter out and cleaned for the second time in 3 days. Guess she had more crud and water than I thought in the tank. Using a clear glass coffee pot this time to inventory the fuel as it's drained so contamination doesn't sneak back into the tank. Also.... Enjoying a great knobber from my wife while wrenching, makes chores seem to whiz by. She's great at holding tools for me look.
Care in the community really does not work , what is the purpose of this ?
The first thing I do is remove these screens from any gas powered engine that has one.
You must have replaced the very short green (ground) wire with a much longer green wire & not said anything about it.
I take those screens out and throw them in the trash.
Well thank you very much!! I had the carb off twice and cleaned but didn't make any difference, then checked the compression, it was 150 lbs. Then I googled it and your video came up first. I cleaned my screen with a fine wire wheel on my bench grinder. What a difference 😁. It's funny how quick it started loosing power. I always use fresh premium fuel and only Stihl 2 stroke oil. My saw is about 12 years old and I was about to go get a new one. I guess I'll cancel the new carb I ordered. Thank you again.
i use a blow torch ... it burns the soot off the spark arrester in literally 30 seconds... and it's fum too...grin
It works but it looks like shit.
I run these bad boys all year long 7 days a week. absolutely beasts
this is the most common issue with this gen and most others.
Thank you. Lots of people open it, but don't show how to put a pellet in. I didn't find it hard putting a pellet in but cocking it was a different matter. Ouch.
Does this beast have a serial number?
Great idea! Nice use of simple supply’s to get the job done 👍
So glad I found this video this is exactly what I needed. I used mineral spirits instead of Acetone and the carbon came off very easily
Every video about Garrett Montana sounds like a 5-year-old banging on a piano.
Perfect fix for my saw… thanks.. really helped!
Very nice 👍
Thanksman
Working on one now didn't even have a screen in there someone must have removed it but it bogs down at throttle I'm going to try to take the Jets out and clean it I clean the carburetor already but it didn't do any good
Terima kasih bapak
you are the best
Thanks! I'll try this. I have two dinged chains. Hit a rock with one and ran out of chain oil for the other.
Hey buddy thanks for the video
take a torch to that screen!
Well done. 👍👀🇬🇧