Charles how do I get you the funds and my information to buy that new Husqvarna saw you are going to port for me as well? That is if you still have it?
@crazyfeller570417 сағат бұрын
👍👍 looking good!
@ragercrepair930121 сағат бұрын
Those 372s are one of the best saws out there! Ready to see the test run of that thing and of course we wanna see it scream through some wood!
@ragercrepair930121 сағат бұрын
Cylinder looks amazing for chipping issues!
@justinweaver8107Күн бұрын
Wicked❤❤
@justinweaver8107Күн бұрын
Love it❤
@justinweaver8107Күн бұрын
❤❤❤❤
@jimssawsnstuff8903Күн бұрын
Great job 😜👍
@crazyfeller5704Күн бұрын
👍👍 definitely some test cuts!
@tantonrosencranz2718Күн бұрын
I wonder who put those big ass dogs on there lol looks good sounds good thank you
@ragercrepair9301Күн бұрын
That's a good runner for sure! Still a little rich or a slight timing curve issue from prior issues you've discussed. But it sure still cuts damn fast!
@ragercrepair9301Күн бұрын
That's a nice running old school stihl right there!
@antoniowhite2606Күн бұрын
All his 4910s cuts about the same work or race saw’s
@mathewpennington7049Күн бұрын
She's a screamer lol
@crazyfeller5704Күн бұрын
👍👍👍
@crazyfeller5704Күн бұрын
👍😛👍👍
@sahalves8025Күн бұрын
Isso sim e uma motoserra 😂
@user-qz1gr1bf1bКүн бұрын
Looks like one of black ⚫️ shadow family members, awesome 👌 🦅🦅🦅😍
@joeygordon4799Күн бұрын
I really like the one that you put up against stickers maybe one I can get that one in my collection also all of them are running good
@TheWayfaringManКүн бұрын
Now, @charlesbrisco, is that more of a full-out "race" version, or will it hold up to firewood?
@sunbear1973Күн бұрын
You can't go wrong with any one of those saws and all are very close. 👍👍💪💪
@forrestebert5276Күн бұрын
I have the Pro 036 very nice saw. They just keep cutting a workhorse for sure!
@CharlesBriscoКүн бұрын
036 were a good saw
@coxsawsКүн бұрын
Sweet set of running chainsaws!
@tonysdailygrind2162Күн бұрын
Great saw!
@crazyfeller57042 күн бұрын
👍👍👍
@crazyfeller57042 күн бұрын
👍👍
@crazyfeller57042 күн бұрын
👍👍
@user-qz1gr1bf1b2 күн бұрын
Real nice 036 stihl 👀 saw 👀 👌 😊🦅🦅🦅🫠
@richnorman50172 күн бұрын
Holy Rocket Ship!!!!!
@crazyfeller57042 күн бұрын
👍👍 thinking stickers likes that 32:1. Great runners all!
@crazyfeller57042 күн бұрын
👍👍 rich and still smokin!
@crazyfeller57042 күн бұрын
👍👍 good runner for sure!
@oldcodger19292 күн бұрын
That's a whole fleet of smile factor there.😊
@ragercrepair93012 күн бұрын
She has some good grunt! Runs great. Good work charles.
@jimholz11022 күн бұрын
Real close between Stickers and the new one..
@jimholz11022 күн бұрын
Next time you're at Joe's compare the foam to a pleated filter on the same saw.
@jimholz11022 күн бұрын
Stickers, the Shin, and the "other one" are what I desire- this is what I need. Nice saw.
@Mightycaptain2 күн бұрын
I could watch those saws cut all day. Just wish mine cut like that. But to be honest mine does seem to cut better than the stockers in your comparison vids.
@CharlesBrisco2 күн бұрын
I've had stockers be all over the place
@Doc-Cole_Trickle-of-Chainsaws2 күн бұрын
👍🆙CB
@kevinblackburn63922 күн бұрын
What an awesome little build!!!! Sounds very good!
@whiskeytangofoxtrot94032 күн бұрын
I'd like to see it with a tuned chain
@mihai_l2 күн бұрын
im not sure on what im going to say but probably the air filter material is not entirely the issue but rather its size 2:26 ,you could probably fit a rectangular one allowing for more surface area,try to contact the same company that made those 3d prints
@Super-Dave-Outdoors2 күн бұрын
Looks like a good filter setup
@user-mx3sl4bp8i2 күн бұрын
Кто Вам сказал что это MS -400???
@CharlesBrisco2 күн бұрын
Because I bout it brand new from the dealer an i ported it an had it dynoed an i race it too
@ragercrepair93012 күн бұрын
Awesome idea!
@BlueBannedGod3 күн бұрын
now listen here bucko dont cha be making it into a pew pew and yull be alll ight
@zam_builder3 күн бұрын
Wow
@crazyfeller57043 күн бұрын
👍👍 pretty slick!
@old12343 күн бұрын
A 1.5" pvc coupler might be a pretty close fit. Or 2" sch80. Both would have a smaller ID than the 2" sch 40.
@crazyfeller57043 күн бұрын
Thinking the same thing using schedule 80 conduit. Takes a lot of heat to bend it- should hold up.
Пікірлер
Charles how do I get you the funds and my information to buy that new Husqvarna saw you are going to port for me as well? That is if you still have it?
👍👍 looking good!
Those 372s are one of the best saws out there! Ready to see the test run of that thing and of course we wanna see it scream through some wood!
Cylinder looks amazing for chipping issues!
Wicked❤❤
Love it❤
❤❤❤❤
Great job 😜👍
👍👍 definitely some test cuts!
I wonder who put those big ass dogs on there lol looks good sounds good thank you
That's a good runner for sure! Still a little rich or a slight timing curve issue from prior issues you've discussed. But it sure still cuts damn fast!
That's a nice running old school stihl right there!
All his 4910s cuts about the same work or race saw’s
She's a screamer lol
👍👍👍
👍😛👍👍
Isso sim e uma motoserra 😂
Looks like one of black ⚫️ shadow family members, awesome 👌 🦅🦅🦅😍
I really like the one that you put up against stickers maybe one I can get that one in my collection also all of them are running good
Now, @charlesbrisco, is that more of a full-out "race" version, or will it hold up to firewood?
You can't go wrong with any one of those saws and all are very close. 👍👍💪💪
I have the Pro 036 very nice saw. They just keep cutting a workhorse for sure!
036 were a good saw
Sweet set of running chainsaws!
Great saw!
👍👍👍
👍👍
👍👍
Real nice 036 stihl 👀 saw 👀 👌 😊🦅🦅🦅🫠
Holy Rocket Ship!!!!!
👍👍 thinking stickers likes that 32:1. Great runners all!
👍👍 rich and still smokin!
👍👍 good runner for sure!
That's a whole fleet of smile factor there.😊
She has some good grunt! Runs great. Good work charles.
Real close between Stickers and the new one..
Next time you're at Joe's compare the foam to a pleated filter on the same saw.
Stickers, the Shin, and the "other one" are what I desire- this is what I need. Nice saw.
I could watch those saws cut all day. Just wish mine cut like that. But to be honest mine does seem to cut better than the stockers in your comparison vids.
I've had stockers be all over the place
👍🆙CB
What an awesome little build!!!! Sounds very good!
I'd like to see it with a tuned chain
im not sure on what im going to say but probably the air filter material is not entirely the issue but rather its size 2:26 ,you could probably fit a rectangular one allowing for more surface area,try to contact the same company that made those 3d prints
Looks like a good filter setup
Кто Вам сказал что это MS -400???
Because I bout it brand new from the dealer an i ported it an had it dynoed an i race it too
Awesome idea!
now listen here bucko dont cha be making it into a pew pew and yull be alll ight
Wow
👍👍 pretty slick!
A 1.5" pvc coupler might be a pretty close fit. Or 2" sch80. Both would have a smaller ID than the 2" sch 40.
Thinking the same thing using schedule 80 conduit. Takes a lot of heat to bend it- should hold up.
Good fix👍