Well folks I would have not believed unless I test drove one, and bought one. I have a 2024 gmc with the 2.7 and I absolutely love it. All I ask is drive one b4 ya belittle it.
@Packhorse-bh8qn2 күн бұрын
Spray WD-40 on it? Oil it? People that stupid should NEVER work on cars!
@frankrusso38763 күн бұрын
Good job! Other videos show removal of entire wire harness, yous is better!
@jcaaa5w8375 күн бұрын
See how long that last
@Truther006 күн бұрын
Will probably need to add a traction bar for the axle wrapping if don’t already have one
@akienazari57656 күн бұрын
The best vid I ever seen ,thx mate, keep your vids up👌👌
@guitarman95717 күн бұрын
great video i have the same car samw problem
@anthonyobama17827 күн бұрын
I have done this to my car, my advice is dont do it by yourself unless it feels very bad, because the procedure is super complex and hard
@slammedb18a19 күн бұрын
All right all these KZread videos about squeaking and squealing brakes need to not have a constant squeaking or squealing in the background of their video oh my goodness!
@adamtedder10129 күн бұрын
The old ones i bash out with a socket and a sledge. The new ones i really clean up where they go in. I take fine sand paper and brake cleaner until its sparkly clean. Then i take a dab of machine oil and wipe it on with my finger. Destroyed too many ujoints and learned the lesson.
@hadleymanmusic10 күн бұрын
Always called it a " flute" Bowl carbs
@johnh486311 күн бұрын
My wires are aren't cut or frayed. They look to be in perfect condition. My button still doesn't work. Idk maybe a faulty button I guess.
@bcruz26411 күн бұрын
Wow I'm impressed.. thank you for sharing that video...I'm getting ready to get one this week..
@darrentylor547312 күн бұрын
Make it easier by removing the crank pulley and changing out the LPOP while your at it... I did
@jimgoffredo92312 күн бұрын
Troubleshooting my son's 2013 Elantra, I was getting ready to replace the rack before I saw your video. Now i'm going to take a second look before replacing that rack. Thanks for your advice.
@kevinconant627912 күн бұрын
I just did this job on my 2008 Dodge Ram. I learned alot.
@Hector.Amezquita13 күн бұрын
Why people watch the video and not subscribe to this great channel, good info brother, thank you !!!
@DS-md7jn13 күн бұрын
And the moral of the story is, don't lift your excursion over 4 inches and you will not have all these issues.
@JW-rv9cy14 күн бұрын
This is exactly what i needed. I was about to kick the headlights in out of frustration
@anthonyobama178216 күн бұрын
Can we apply heavy duty grease on that point, if it always worn?
@dennisbethards323119 күн бұрын
Really think if they would have just put a turbo on the 4.3 v six would be better and just as good on gas
@TeresaKnadle19 күн бұрын
Do you have video to fix the shifter shaft if it wasn’t aligned when putting the lower unit back on?
@user-ln7zu2me1p20 күн бұрын
Thanks for the tutorial. It would have been cool to see how the 3 screws were taken off with 2 hands🤔😁 Direct and to the point, really appreciate that👍🏾
@marlonandrade800621 күн бұрын
What could an ecu tune do for this vehicle?or an exhaust or CAI ?
@marlonandrade800621 күн бұрын
The way you talked about trading in and losing money made me serious about your test vid. Truly amazing video mate
@billcudd784422 күн бұрын
God bless you for showing your mistake.
@Brv1nBl0w22 күн бұрын
So is it better to adjust it little bit lower (negative angle) to be in line when accelerate? Or better to adjuste in line flat with no load?
@shejustwright23 күн бұрын
My car is doing this. What happens if you don’t get it replaced?
@jessejames884323 күн бұрын
I was just quoted 600 big ones, giving this a go myself
@dannynolley602924 күн бұрын
Thanks bud....Saved me $650
@sentient814628 күн бұрын
I wish I had seen you do the actual drop. I’m all set to do it. It would just be nice to know how to pull the nuts off the bolts. Are you physically propping it up? You can't pull a nut off with stressing anything remaining. PS your vid was well done and I learned a lot.
@MartinButts-vk6zcАй бұрын
I love your video its make show that you can not make a mistake awesome keep up the great job your video are awesome 👏 👍
@percymamabolo5540Ай бұрын
Great work thanks
@stevehitchcock7617Ай бұрын
Looks great
@magnushurtside3234Ай бұрын
Would this cause the gauges to stop working
@redrover9988Ай бұрын
Just paid dealership over 700 for this on a 2012 Veloster. Wish I had of looked here first.
@McFiercelyАй бұрын
Thanks for the vid - He shoulda known you can’t text to a landline!
@watchman6104Ай бұрын
I can not get the 14mm bolt loose from the bottom on my new engine. Is it reverse thread or something? Is it just extra tight? It will not loosen and I am afraid I will break it.
@kalsisomaАй бұрын
Great video. i have the same knock, but even with the engine off. is it possible that it is the intermediate shaft instead? Thanks
@AndreyMusvitskasАй бұрын
Awesome 👌 Thanks a lot👍
@travisrosenberg22Ай бұрын
Do you have to keep putting this on as the brakes wear down?
@catalyst38521 күн бұрын
I sell a lot of this stuff, and we guarantee no squealing for two years after the brake job. It doesn’t last forever, but if you let it soak in real well when you’re treating the pads it’ll last a long time
@GaryShimotaАй бұрын
Get out on a freeway with the wind blowing pulling a camper for 300 miles Thier even a small camper is no way a 4 cylinder will handle it. If you are towing just a few miles once in awhile you would probably be okay. I personally would never buy one.
@lakesnluresoutdoors9017Ай бұрын
Best video I've seen. Leaves no stone unturned. Thanks
@user-oy1uv7zz7rАй бұрын
Why would anyone open up the engine that is dirty?
@ChuckBeefOGАй бұрын
Cutting torch tip cleaners work the best. They are about $2 and come with all sizes. They are cut like a file to remove fouling.
@FranciscoGaliciaАй бұрын
great video. thanks for doing it.
@JessicaMaya-vi6drАй бұрын
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
@JessicaMaya-vi6drАй бұрын
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
@JessicaMaya-vi6drАй бұрын
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
@JessicaMaya-vi6drАй бұрын
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
Пікірлер
Well folks I would have not believed unless I test drove one, and bought one. I have a 2024 gmc with the 2.7 and I absolutely love it. All I ask is drive one b4 ya belittle it.
Spray WD-40 on it? Oil it? People that stupid should NEVER work on cars!
Good job! Other videos show removal of entire wire harness, yous is better!
See how long that last
Will probably need to add a traction bar for the axle wrapping if don’t already have one
The best vid I ever seen ,thx mate, keep your vids up👌👌
great video i have the same car samw problem
I have done this to my car, my advice is dont do it by yourself unless it feels very bad, because the procedure is super complex and hard
All right all these KZread videos about squeaking and squealing brakes need to not have a constant squeaking or squealing in the background of their video oh my goodness!
The old ones i bash out with a socket and a sledge. The new ones i really clean up where they go in. I take fine sand paper and brake cleaner until its sparkly clean. Then i take a dab of machine oil and wipe it on with my finger. Destroyed too many ujoints and learned the lesson.
Always called it a " flute" Bowl carbs
My wires are aren't cut or frayed. They look to be in perfect condition. My button still doesn't work. Idk maybe a faulty button I guess.
Wow I'm impressed.. thank you for sharing that video...I'm getting ready to get one this week..
Make it easier by removing the crank pulley and changing out the LPOP while your at it... I did
Troubleshooting my son's 2013 Elantra, I was getting ready to replace the rack before I saw your video. Now i'm going to take a second look before replacing that rack. Thanks for your advice.
I just did this job on my 2008 Dodge Ram. I learned alot.
Why people watch the video and not subscribe to this great channel, good info brother, thank you !!!
And the moral of the story is, don't lift your excursion over 4 inches and you will not have all these issues.
This is exactly what i needed. I was about to kick the headlights in out of frustration
Can we apply heavy duty grease on that point, if it always worn?
Really think if they would have just put a turbo on the 4.3 v six would be better and just as good on gas
Do you have video to fix the shifter shaft if it wasn’t aligned when putting the lower unit back on?
Thanks for the tutorial. It would have been cool to see how the 3 screws were taken off with 2 hands🤔😁 Direct and to the point, really appreciate that👍🏾
What could an ecu tune do for this vehicle?or an exhaust or CAI ?
The way you talked about trading in and losing money made me serious about your test vid. Truly amazing video mate
God bless you for showing your mistake.
So is it better to adjust it little bit lower (negative angle) to be in line when accelerate? Or better to adjuste in line flat with no load?
My car is doing this. What happens if you don’t get it replaced?
I was just quoted 600 big ones, giving this a go myself
Thanks bud....Saved me $650
I wish I had seen you do the actual drop. I’m all set to do it. It would just be nice to know how to pull the nuts off the bolts. Are you physically propping it up? You can't pull a nut off with stressing anything remaining. PS your vid was well done and I learned a lot.
I love your video its make show that you can not make a mistake awesome keep up the great job your video are awesome 👏 👍
Great work thanks
Looks great
Would this cause the gauges to stop working
Just paid dealership over 700 for this on a 2012 Veloster. Wish I had of looked here first.
Thanks for the vid - He shoulda known you can’t text to a landline!
I can not get the 14mm bolt loose from the bottom on my new engine. Is it reverse thread or something? Is it just extra tight? It will not loosen and I am afraid I will break it.
Great video. i have the same knock, but even with the engine off. is it possible that it is the intermediate shaft instead? Thanks
Awesome 👌 Thanks a lot👍
Do you have to keep putting this on as the brakes wear down?
I sell a lot of this stuff, and we guarantee no squealing for two years after the brake job. It doesn’t last forever, but if you let it soak in real well when you’re treating the pads it’ll last a long time
Get out on a freeway with the wind blowing pulling a camper for 300 miles Thier even a small camper is no way a 4 cylinder will handle it. If you are towing just a few miles once in awhile you would probably be okay. I personally would never buy one.
Best video I've seen. Leaves no stone unturned. Thanks
Why would anyone open up the engine that is dirty?
Cutting torch tip cleaners work the best. They are about $2 and come with all sizes. They are cut like a file to remove fouling.
great video. thanks for doing it.
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?
I accidentally pulled the steering wheel off with the column and put everything back together but the steering wheel is upside down. I took it apart and reinstalled with the steering wheel in a different position and it’s still upside down. How do I fix it?