Do you know what it weighs, and what your payload is?
@TDRAuto15 сағат бұрын
@@seanlichter435 The truck’s payload is 1970 lbs and the estimated weight of the empty camper is 400 - 450 lbs (based on other user’s scaling their trucks before and after install.
@thegreener196Күн бұрын
does this work for 2000 kia sephia? I am having the same problem.
@miketrudelle769Күн бұрын
Paper clip
@bradgradertКүн бұрын
Will it fit in your garage?
@SpokedTrailsКүн бұрын
No it does not fit in to typical suburban car garage, the truck did not fit even before though. 😅 It would be nice to come up with some rolling jacks so I could take it off in the driveway and push the camper inside the garage for winter.
@asdfasdf-fg5kx2 күн бұрын
another potentially epic video ruined by moronic on/off/on/off music edit.
@abrahamkal80404 күн бұрын
My goodness !!! God bless you man. This is very helpful and very educational. THANK YOU VERY MUCH
@Mo-gm5zm4 күн бұрын
You know, everybody talks about the t-track and options of mounting stuff but no one… I mean no one has ever had a video actually demonstrating how they use the t-track for mounting. I like the tune and actually have one on order but the project m actually mounts gear on the outside… having all the t-track is great ‘if’ it’s actually usable. I’d love to see some real use of the t-track.
@TDRAuto4 күн бұрын
@@Mo-gm5zm Yes it is all plans and little realization, lol. I want to add the propane tank with a bracket to the outside and order some extruded aluminum framing to build shelving for storage and bed. For that I want to use the truck bed attachments though rather then adding mass to the camper. It’s a long process.
@Downytide5 күн бұрын
I think KZread recognized your vehicle, I'm certain just spotted your truck at jailbreak overland video at the 37mins mark. kzread.info/dash/bejne/ka2B2ZuIgMTKkrg.htmlsi=kGICCnD5tqVuiJrO
@duckwacker87206 күн бұрын
If you deleted your truck from day one like you're supposed to you won't have any issues.
@duckwacker87206 күн бұрын
15w-40 every time
@duckwacker87206 күн бұрын
Always use a band wrench to tighten a diesel filter! Not super tight tight enough.
@qtcwaji7 күн бұрын
Your videos are awesome. I have. EGR problem with my Ram 3500. Can you help me with this?
@JoMusicChannel017 күн бұрын
What was that “one time use” thing he took out? He didn’t list the part nor spoke about it, I am trying to collect all the stuff now.
@TDRAuto7 күн бұрын
All fuel tubes are one time use only, I hear of people reuse them but at that point they can start leaking anytime. As long as the intake is out make sure to inspect that coolant hose/tube from the turbo and the water pipe from the water pump, there are o-rings that can leak.
@JoMusicChannel012 күн бұрын
@@TDRAuto that’s not what I was referring to, you removed a fitting with a 19mm socket, and said “this is a one time use (fitting)”. What the name or part number to that fitting you were referring up?
@JoMusicChannel012 күн бұрын
@@TDRAuto *to (?)
@JoMusicChannel012 күн бұрын
@@TDRAuto perhaps it was the “exhaust gas tube (Mopar Part # 68211256AA)?
@gerardfalco43207 күн бұрын
Add me to the list. Two years not working even after bringing it to a mechanic. Thanks for saving us.
@user-gv3hb4tg5n9 күн бұрын
The ladder is a great addition- !! Like it s lot!!
@kingchihuas19 күн бұрын
How can u tell if the manifold is broken? On mine the bolts broke of but whats making the sound is the heat shield can i just replace bolts and be done with it?
@BFK7810 күн бұрын
Wish me luck! My 2015 Forester is beyond 0.635 at the moment, but that’ll change soon. Thank you for the amazingly simple fix!
@slimms1111 күн бұрын
Love the ladder attachment on the truck bed 👍
@brittpereira260011 күн бұрын
I used a large pair of Chanel locks to loosen the filter and it worked great and I hand tighten the new one back
@Snwjnky12 күн бұрын
That looked like a great trip. I had a heart attack watching too! I have a Rebel. Topper looks good on one 👍
@photogartho12 күн бұрын
I wouldn't even do that walking.....
@Colorado4x413 күн бұрын
That’s awesome man! Way to roll in style. Love it
@carlosandrade743913 күн бұрын
These single lane roads should all be one ways to avoid bottle necking.
@mrkaiman305215 күн бұрын
So cool. Did you have to lock your diff through any of these parts?
@TDRAuto15 күн бұрын
@@mrkaiman3052 I did not have to, I just tried it in the beginning. These Duratrac tires had plenty of grip.
@mauriceonichino424415 күн бұрын
I have the same problem with my 2015 forester. It works for about 15 or 20 minutes and then it stops. I am happy to see that I am not alone having the same problem. If I understood correctly it is a .3 mm gauge that is the correct gap? I will try this out and let you know.
@Rossco60315 күн бұрын
I just replaced the coolant tube got it back together and it wont start i think theres air in the system but i dont know how to bleed it out. Any recommendations?
@TDRAuto15 күн бұрын
@@Rossco603 make sure all the lines are tight and no fuel leaks. It might take a while as it is self bleeding
@Rossco60315 күн бұрын
@@TDRAuto how many times do i have to cycle the pump? I turned the truck on to prime several times and its still got nothing
@Rossco60314 күн бұрын
Also I will mention this is the second time I’ve reused the fuel lines and fuel rails and I don’t have the tools to torque them down like Mopar suggest I even went as far as taking fuel line off the rail and trying to prime the system and no fuel came out of them at allwould it be that I need new rails in lines and injectors? Im at 225000 miles
@TDRAuto14 күн бұрын
@@Rossco603 was the car running before you took the intake out? If yes, you must have forgot to plug some wire. Can you scan it for codes? Never disconnect any hard lines while cranking, 10000 psi or more will go through you like butter. You should see around 50 psi going to the high pressure pump (plastics lines)
@Rossco60313 күн бұрын
@@TDRAuto yea i got it working i forgot to tighten a rail.
@josephdonnaway575516 күн бұрын
Excellent production. That’s one route I won’t be doing with my RAM 2500 and Tune M1, so I really enjoyed watching you.
@TheOneJPtv16 күн бұрын
I'm convinced these chinese made ac compressors have a built in planned obsolesence because HOW are all these vehicle brands having the same issue with the ac compressors. I have a Volvo with this exact issue. and we say put a ziptie on it in 3 places to gap it back to spec
@8gomerpyle2217 күн бұрын
I may just have to get a Subaru due to how incredibly accessible the A/C compressor is. As opposed to every other car brand on the market.
@Guyfromhuligan17 күн бұрын
Thank you!!! Mine had the leak in the same exact spot!!
@jaccog583118 күн бұрын
Many, many thanks to you! Watching your video, 10 minutes work to fix it. I’ve a Forrester xt from 2013 with this problem.This version has 3 rings. Removed the 0.3mm so we’ve a nice 0.4 mm slack. Today driving from Holland to France in 32 Celsius with a nice working AC.👍
@pingpongballz599818 күн бұрын
Only thing I don't like is the lack of headroom in the sleeping area.
@TDRAuto18 күн бұрын
@@pingpongballz5998 there will always be some sacrifice in light weight pop up bed campers. But unlike in most rooftop tents that just pop open on one side, it is nice to have the option to choose sleeping arrangements like N-S or W-E, so you don’t have to worry about leveling the truck too much.
@pingpongballz599818 күн бұрын
@@TDRAuto true that
@MrJerry61918 күн бұрын
Why are you playing dumb music instead of explains what you’re doing??????????
@TDRAuto18 күн бұрын
@@MrJerry619 those were my beginnings in making repair videos, the audio was too bad to use
@Snwjnky19 күн бұрын
Does the cab over interfere with the radio or GPS? I have the same truck with the shark fin in the back.
@TDRAuto18 күн бұрын
I did not notice any difference in reception, my CarPlay navigation works good too.
@BasicBeachCommunity120 күн бұрын
Big Channel Locks around the circle cover ... Then looser leftry
@derricklee69286 күн бұрын
To free clutch wheel from compressor?
@BasicBeachCommunity16 күн бұрын
@@derricklee6928 oh yeah.. But the system needs the correct freon pressure in order to work right. That needs to be done first and checked by a mechanic
@derricklee69286 күн бұрын
ok i’ll check pressure and then try again see if comes off with easy appreciate that info
@BasicBeachCommunity16 күн бұрын
@@derricklee6928 Yeah if the system is not pressurized right none of it will work correctly... I wish I would have read it that before I took it apart 👍
@BasicBeachCommunity16 күн бұрын
@@derricklee6928 oh yeah you can wash the condenser in the front of the car It's full of bugs and dust and little rocks in that sucks in the air initially
@andybaldman21 күн бұрын
Thank you for your service.
@andybaldman21 күн бұрын
It’s too bad youtube doesn’t reward people for providing info like this, as opposed to the crap ‘influencers’ get paid to create today. You have collectively saved people tens of thousands of dollars (if not more) with this one video. And we have no way to reward you for your work. 2015 Impreza, same issue. THANK YOU.
@miguelfloriano903921 күн бұрын
I know this video is old but what tool was that at ? the measurement.
@fishin1122 күн бұрын
Known problem with Hemi 5.7. Want to fix it? Think of the cause! Bolt breaks then manifold warps & leaks. BEFORE the bolt breaks, which is reason it leaks, remove bolt, replace with grade 8 bolt. Problem fixed before it happened!! Most arm chair mechanics can do and a lot of money saved. They will not warp if held in place!!!!
@Koshelkoff7723 күн бұрын
Супер 💥
@peterblunsden173323 күн бұрын
Worked perfectly. Thank you! You saved me a bundle. I just gently wedged a screwdriver in to hold the clutch while I removed the bolt. Took 15 minutes tops, start to finish. Took longer to find my feeler gauge.
@kinghernandez145323 күн бұрын
Bro explained my problem down to the noise 😭
@adamstevenson248524 күн бұрын
POS Dodge! The fact that you have a Dodge discredits everything about you. Your judgment is severely skewed. You’re already establishing you know nothing about auto mechanics. I wonder how much else you don’t know about?
@dave_in_az24 күн бұрын
Well done, nice walk through! I posted your video on the owner's FB forum ;)
@TDRAuto23 күн бұрын
Thank you!
@GaryGotori-xx6ch26 күн бұрын
This is wide spread problem and isn’t a SERVICE BULLETIN or recall. Anybody try the JBA shorty header instead of OEM manifold
@larrywalsh517326 күн бұрын
you make it look so easy!
@MarieLovely14326 күн бұрын
Just tried it and it worked, You are the man. I would have never thought of that. Been in upper 100's for over a week now. My daughter is loving it👍👍👍👍👍👍
@diastoleny26 күн бұрын
We really dislike our 2014 Forrester since we bought it new! Always fixing something, A/C, ww wiper line fittings, wheel bearings, CV axel stuff.... On and on. Never had these problems with our Hondas or even a 2010 chrysler 300 for a dozen years. Toyota or Honda Period!
@TDRAuto26 күн бұрын
Sorry to hear that, I loved my Forester, in the 5 years I owned it I only had to replace the rear wheel bearings, brakes and fix that AC
@felipeguzman639927 күн бұрын
My 2020 Subaru Wrx isn’t blowing cold air would this work on it as well!? Someone please help
@big474027 күн бұрын
What if after removing one of the shims, you still get 0.7?
Пікірлер
Do you know what it weighs, and what your payload is?
@@seanlichter435 The truck’s payload is 1970 lbs and the estimated weight of the empty camper is 400 - 450 lbs (based on other user’s scaling their trucks before and after install.
does this work for 2000 kia sephia? I am having the same problem.
Paper clip
Will it fit in your garage?
No it does not fit in to typical suburban car garage, the truck did not fit even before though. 😅 It would be nice to come up with some rolling jacks so I could take it off in the driveway and push the camper inside the garage for winter.
another potentially epic video ruined by moronic on/off/on/off music edit.
My goodness !!! God bless you man. This is very helpful and very educational. THANK YOU VERY MUCH
You know, everybody talks about the t-track and options of mounting stuff but no one… I mean no one has ever had a video actually demonstrating how they use the t-track for mounting. I like the tune and actually have one on order but the project m actually mounts gear on the outside… having all the t-track is great ‘if’ it’s actually usable. I’d love to see some real use of the t-track.
@@Mo-gm5zm Yes it is all plans and little realization, lol. I want to add the propane tank with a bracket to the outside and order some extruded aluminum framing to build shelving for storage and bed. For that I want to use the truck bed attachments though rather then adding mass to the camper. It’s a long process.
I think KZread recognized your vehicle, I'm certain just spotted your truck at jailbreak overland video at the 37mins mark. kzread.info/dash/bejne/ka2B2ZuIgMTKkrg.htmlsi=kGICCnD5tqVuiJrO
If you deleted your truck from day one like you're supposed to you won't have any issues.
15w-40 every time
Always use a band wrench to tighten a diesel filter! Not super tight tight enough.
Your videos are awesome. I have. EGR problem with my Ram 3500. Can you help me with this?
What was that “one time use” thing he took out? He didn’t list the part nor spoke about it, I am trying to collect all the stuff now.
All fuel tubes are one time use only, I hear of people reuse them but at that point they can start leaking anytime. As long as the intake is out make sure to inspect that coolant hose/tube from the turbo and the water pipe from the water pump, there are o-rings that can leak.
@@TDRAuto that’s not what I was referring to, you removed a fitting with a 19mm socket, and said “this is a one time use (fitting)”. What the name or part number to that fitting you were referring up?
@@TDRAuto *to (?)
@@TDRAuto perhaps it was the “exhaust gas tube (Mopar Part # 68211256AA)?
Add me to the list. Two years not working even after bringing it to a mechanic. Thanks for saving us.
The ladder is a great addition- !! Like it s lot!!
How can u tell if the manifold is broken? On mine the bolts broke of but whats making the sound is the heat shield can i just replace bolts and be done with it?
Wish me luck! My 2015 Forester is beyond 0.635 at the moment, but that’ll change soon. Thank you for the amazingly simple fix!
Love the ladder attachment on the truck bed 👍
I used a large pair of Chanel locks to loosen the filter and it worked great and I hand tighten the new one back
That looked like a great trip. I had a heart attack watching too! I have a Rebel. Topper looks good on one 👍
I wouldn't even do that walking.....
That’s awesome man! Way to roll in style. Love it
These single lane roads should all be one ways to avoid bottle necking.
So cool. Did you have to lock your diff through any of these parts?
@@mrkaiman3052 I did not have to, I just tried it in the beginning. These Duratrac tires had plenty of grip.
I have the same problem with my 2015 forester. It works for about 15 or 20 minutes and then it stops. I am happy to see that I am not alone having the same problem. If I understood correctly it is a .3 mm gauge that is the correct gap? I will try this out and let you know.
I just replaced the coolant tube got it back together and it wont start i think theres air in the system but i dont know how to bleed it out. Any recommendations?
@@Rossco603 make sure all the lines are tight and no fuel leaks. It might take a while as it is self bleeding
@@TDRAuto how many times do i have to cycle the pump? I turned the truck on to prime several times and its still got nothing
Also I will mention this is the second time I’ve reused the fuel lines and fuel rails and I don’t have the tools to torque them down like Mopar suggest I even went as far as taking fuel line off the rail and trying to prime the system and no fuel came out of them at allwould it be that I need new rails in lines and injectors? Im at 225000 miles
@@Rossco603 was the car running before you took the intake out? If yes, you must have forgot to plug some wire. Can you scan it for codes? Never disconnect any hard lines while cranking, 10000 psi or more will go through you like butter. You should see around 50 psi going to the high pressure pump (plastics lines)
@@TDRAuto yea i got it working i forgot to tighten a rail.
Excellent production. That’s one route I won’t be doing with my RAM 2500 and Tune M1, so I really enjoyed watching you.
I'm convinced these chinese made ac compressors have a built in planned obsolesence because HOW are all these vehicle brands having the same issue with the ac compressors. I have a Volvo with this exact issue. and we say put a ziptie on it in 3 places to gap it back to spec
I may just have to get a Subaru due to how incredibly accessible the A/C compressor is. As opposed to every other car brand on the market.
Thank you!!! Mine had the leak in the same exact spot!!
Many, many thanks to you! Watching your video, 10 minutes work to fix it. I’ve a Forrester xt from 2013 with this problem.This version has 3 rings. Removed the 0.3mm so we’ve a nice 0.4 mm slack. Today driving from Holland to France in 32 Celsius with a nice working AC.👍
Only thing I don't like is the lack of headroom in the sleeping area.
@@pingpongballz5998 there will always be some sacrifice in light weight pop up bed campers. But unlike in most rooftop tents that just pop open on one side, it is nice to have the option to choose sleeping arrangements like N-S or W-E, so you don’t have to worry about leveling the truck too much.
@@TDRAuto true that
Why are you playing dumb music instead of explains what you’re doing??????????
@@MrJerry619 those were my beginnings in making repair videos, the audio was too bad to use
Does the cab over interfere with the radio or GPS? I have the same truck with the shark fin in the back.
I did not notice any difference in reception, my CarPlay navigation works good too.
Big Channel Locks around the circle cover ... Then looser leftry
To free clutch wheel from compressor?
@@derricklee6928 oh yeah.. But the system needs the correct freon pressure in order to work right. That needs to be done first and checked by a mechanic
ok i’ll check pressure and then try again see if comes off with easy appreciate that info
@@derricklee6928 Yeah if the system is not pressurized right none of it will work correctly... I wish I would have read it that before I took it apart 👍
@@derricklee6928 oh yeah you can wash the condenser in the front of the car It's full of bugs and dust and little rocks in that sucks in the air initially
Thank you for your service.
It’s too bad youtube doesn’t reward people for providing info like this, as opposed to the crap ‘influencers’ get paid to create today. You have collectively saved people tens of thousands of dollars (if not more) with this one video. And we have no way to reward you for your work. 2015 Impreza, same issue. THANK YOU.
I know this video is old but what tool was that at ? the measurement.
Known problem with Hemi 5.7. Want to fix it? Think of the cause! Bolt breaks then manifold warps & leaks. BEFORE the bolt breaks, which is reason it leaks, remove bolt, replace with grade 8 bolt. Problem fixed before it happened!! Most arm chair mechanics can do and a lot of money saved. They will not warp if held in place!!!!
Супер 💥
Worked perfectly. Thank you! You saved me a bundle. I just gently wedged a screwdriver in to hold the clutch while I removed the bolt. Took 15 minutes tops, start to finish. Took longer to find my feeler gauge.
Bro explained my problem down to the noise 😭
POS Dodge! The fact that you have a Dodge discredits everything about you. Your judgment is severely skewed. You’re already establishing you know nothing about auto mechanics. I wonder how much else you don’t know about?
Well done, nice walk through! I posted your video on the owner's FB forum ;)
Thank you!
This is wide spread problem and isn’t a SERVICE BULLETIN or recall. Anybody try the JBA shorty header instead of OEM manifold
you make it look so easy!
Just tried it and it worked, You are the man. I would have never thought of that. Been in upper 100's for over a week now. My daughter is loving it👍👍👍👍👍👍
We really dislike our 2014 Forrester since we bought it new! Always fixing something, A/C, ww wiper line fittings, wheel bearings, CV axel stuff.... On and on. Never had these problems with our Hondas or even a 2010 chrysler 300 for a dozen years. Toyota or Honda Period!
Sorry to hear that, I loved my Forester, in the 5 years I owned it I only had to replace the rear wheel bearings, brakes and fix that AC
My 2020 Subaru Wrx isn’t blowing cold air would this work on it as well!? Someone please help
What if after removing one of the shims, you still get 0.7?