Replacing front right axle seal on Ram 2500 3500 with axle disconnect and what tools are needed for the job.
Жүктеу.....
Пікірлер: 31
@joney51062 жыл бұрын
Made my own tool from your video! 3/4" all thread 18" long, 2 pieces of 1/4" steel, 2 washers and 2 nuts. Worked great and at a quarter of the price for the tool designed to do the job!
@angrytrukker4672
Жыл бұрын
Hello, I am getting ready to do an axle seal on my truck. 96 2500 dana 60 front axle. May I ask you a question about the tool you made?
@KawaTJ873 жыл бұрын
Speechless! I dont know what i habe to say without perfect! You speak slowly and clearly so as i can understand every word! Additionally you shows us some dimensions from the special Tool so wie can DIY! Big thanks from North Germany!
@TDRAuto
3 жыл бұрын
Jan T thanks for your nice feedback!
@chrissilva661 Жыл бұрын
I was replacing the axle joint on my 2014 Ram 3500, because it was making noise. When I pulled the axle from the housing the broken seal came out with it. I have ordered a replacement seal and tool from Torque King 4x4. This video gave me the confidence to do it. Wish me luck.
@bobbyledford19574 жыл бұрын
im a heavyline mechanic. this is the best video and informative teacher as of yet! great job!!
@TDRAuto
4 жыл бұрын
bobby ledford Thanks, I appreciate your comment! :-)
@spasticlabrat3 жыл бұрын
Great video--thanks for making it so simple to follow, but still giving the bolt sizes. I do like the "gentle tapping" part!
@onebaddj3 жыл бұрын
Thank you for this video! I made the plates from some steel and am using my slide hammer shaft.
@samtheman31884 жыл бұрын
Nice vid brother having that module thing there help alot on the right side hopefully they dont chagre me arm and leg to get fixed mines leaking. 2016 6.7 9inch lift
@joehermosa79413 жыл бұрын
How do you replace the left side seal?
@johnz82104 жыл бұрын
That was great. Thanks for the video. Very helpful.
@tylerpalmer6615 Жыл бұрын
Always better for searching if you include the year of the vehicle in the description and a picture of the vehicle for the thumbnail.
@vitaliybocharov83643 жыл бұрын
thank you , nice video.
@MXvsATV1442 жыл бұрын
How long do these seals typically last? I’m at 112k on a 2015 Ram 2500. I have raced around abit like a sports car on 35’s, don’t tow much but several times a year, should these last closer to 200k…
@randygarza30013 жыл бұрын
Awesome video. Is this pretty much the same process for the 2012 RAM 3500s? I know you have to remove the gears. Where can you buy the tools to insert the new seal?
@marcostrevino708 Жыл бұрын
Do you have to remove the differential case and drain the oil before you take out that cover?
@andredya98674 жыл бұрын
Thank you
@tomyarosz74072 жыл бұрын
How much did this job cost to have done ?
@martinduenesjr95923 жыл бұрын
Hey bud thats a great vid. ... can u tell me where u bought seal or part # an thanks ..
@jfc7238 ай бұрын
Isn't there another seal at the pumpkin?
@randygarza30014 жыл бұрын
An you do the same on a 2012 Ram 3500? Mine front differential is different.
@TDRAuto
4 жыл бұрын
You must have the other style 275FBI without el. disconnect. It's more easy, pop the hub and axle out and just use seal puller to remove seal.
@randygarza3001
3 жыл бұрын
@@TDRAuto Awesome. Do I need to remove my gears?
@codyphillips75492 жыл бұрын
What was that seal set kit & I want to buy one
@MXvsATV1442 жыл бұрын
Sounds like Andre or whatever his name is from TFL
@fernandomendoza46674 жыл бұрын
Where Did You Bought The Front Differential Gasket ?
@bryanreyes1480 Жыл бұрын
Where can I get that tools?
@supsuplagit21744 жыл бұрын
do you have video of how to do other side?
@TDRAuto
4 жыл бұрын
No I don't sorry, for left side the differential assembly must come out from the case and the seal sits behind the adjuster.
@johnnya4329
4 жыл бұрын
TDR Auto so I have to take off the pumpkin 2007.5 6.7 cummins my driver side is leaking and this is the only good video on KZread but it’s on the other side. Any help please ? Thank you
Пікірлер: 31
Made my own tool from your video! 3/4" all thread 18" long, 2 pieces of 1/4" steel, 2 washers and 2 nuts. Worked great and at a quarter of the price for the tool designed to do the job!
@angrytrukker4672
Жыл бұрын
Hello, I am getting ready to do an axle seal on my truck. 96 2500 dana 60 front axle. May I ask you a question about the tool you made?
Speechless! I dont know what i habe to say without perfect! You speak slowly and clearly so as i can understand every word! Additionally you shows us some dimensions from the special Tool so wie can DIY! Big thanks from North Germany!
@TDRAuto
3 жыл бұрын
Jan T thanks for your nice feedback!
I was replacing the axle joint on my 2014 Ram 3500, because it was making noise. When I pulled the axle from the housing the broken seal came out with it. I have ordered a replacement seal and tool from Torque King 4x4. This video gave me the confidence to do it. Wish me luck.
im a heavyline mechanic. this is the best video and informative teacher as of yet! great job!!
@TDRAuto
4 жыл бұрын
bobby ledford Thanks, I appreciate your comment! :-)
Great video--thanks for making it so simple to follow, but still giving the bolt sizes. I do like the "gentle tapping" part!
Thank you for this video! I made the plates from some steel and am using my slide hammer shaft.
Nice vid brother having that module thing there help alot on the right side hopefully they dont chagre me arm and leg to get fixed mines leaking. 2016 6.7 9inch lift
How do you replace the left side seal?
That was great. Thanks for the video. Very helpful.
Always better for searching if you include the year of the vehicle in the description and a picture of the vehicle for the thumbnail.
thank you , nice video.
How long do these seals typically last? I’m at 112k on a 2015 Ram 2500. I have raced around abit like a sports car on 35’s, don’t tow much but several times a year, should these last closer to 200k…
Awesome video. Is this pretty much the same process for the 2012 RAM 3500s? I know you have to remove the gears. Where can you buy the tools to insert the new seal?
Do you have to remove the differential case and drain the oil before you take out that cover?
Thank you
How much did this job cost to have done ?
Hey bud thats a great vid. ... can u tell me where u bought seal or part # an thanks ..
Isn't there another seal at the pumpkin?
An you do the same on a 2012 Ram 3500? Mine front differential is different.
@TDRAuto
4 жыл бұрын
You must have the other style 275FBI without el. disconnect. It's more easy, pop the hub and axle out and just use seal puller to remove seal.
@randygarza3001
3 жыл бұрын
@@TDRAuto Awesome. Do I need to remove my gears?
What was that seal set kit & I want to buy one
Sounds like Andre or whatever his name is from TFL
Where Did You Bought The Front Differential Gasket ?
Where can I get that tools?
do you have video of how to do other side?
@TDRAuto
4 жыл бұрын
No I don't sorry, for left side the differential assembly must come out from the case and the seal sits behind the adjuster.
@johnnya4329
4 жыл бұрын
TDR Auto so I have to take off the pumpkin 2007.5 6.7 cummins my driver side is leaking and this is the only good video on KZread but it’s on the other side. Any help please ? Thank you