This has been helpful, thank you so much. One piece of advice though, when you use words to emphasize something, please keep them on screen for little bit longer.

At last a useful uncomplicated explaination how to fit Light PIR thanks

That's a great clear way to explain .. love the bird song and no off putting music. Thanks ..

@FrogsAngelsLondon

3 жыл бұрын

Thanks for the comment. This is the privilege to live in the country side and be close to nature. Hope it helps setting up your system.

Let's see the actual installation outside, mounting it to a wall, all the wires tucked in, and the covers on .

Fabulous. Thank you so much for doig this video. Others seem to make it something like spaghetti wrestling. With your video, clear and straightforward I am now able to pre wire our new bathroom led's with a motion sensor in the knowledge thaqt it will be correct. Other DIY video makers can learn a lot from your 'delivery'.

@FrogsAngelsLondon

2 жыл бұрын

You're very welcome. So easy to fit really

Very helpful, thanks a lot.

Thank you, very helpful 👏🏻👏🏻👏🏻

Your installation is very clear. Thank you.

@FrogsAngelsLondon

3 жыл бұрын

Yeah works really well. Cheers

it was a job I was going to undertake today but it started raining. Your video was just what I needed, thanks! I presume if I have two earth wires I splice them together too, like you did with natural (blue).

@FrogsAngelsLondon

3 жыл бұрын

Thanks for the comment. Yes indeed

@skinnyniggawidfatbelly7212

10 ай бұрын

What is a natural? 😂

I was planning to install on for my shed and deter the foxes. Very useful thanks

@FrogsAngelsLondon

3 жыл бұрын

Glad it was helpful!

@MianShahbazAhmad1310

3 жыл бұрын

Hi

@MianShahbazAhmad1310

3 жыл бұрын

U number send me plzzzz

Hi, great video, but I have the same question as Matt Woodfine. The PIR sensor I bought doesn't have room for the 2 cables....

very clear demo thank you

@FrogsAngelsLondon

3 жыл бұрын

Thank you hope it helps

thank you👍👍

Try narration, it really helps!

I'm guessing there's no pv sensor, so the pir only works at night?

Brilliant, by setting up a test rig like this has helped me test the existing PIR, but also now enables me to get the settings correct before the install unless unplugging and rewiring externally resets everything... saves running up and down the ladder and waving from ground level?

@FrogsAngelsLondon

3 жыл бұрын

Well I'm glad it works for you. All the best

@juangizirian9810

3 күн бұрын

@@FrogsAngelsLondon I've bought one similar to yours. I'm having trouble with the height and detection. What's the minimum height for it to work properly? mine I think it's about 3 meters or bit more.

❤

That's great but what I don't get is how do the manufacturers expect you to pass 2 cables thru the one grommet and still be watertight?

@peterhart1018

11 ай бұрын

Join them in a separate weatherproof junction box, (either inside or outside the building) and run a single extension cable from the sensor wiring block.

can pir sensor sense moving vehicles?

how about ceiling fan? interrupted?

lifesaver... mockingbird hill

I think for someone who isnt sure this video only shows how to wire in the lamp. Showing the power being wired in also would be more helpful

Hi, may i know if always stay near the sensor. will the light always on or it will off and on back when time out?

@sherbetdab1200

Жыл бұрын

If you stay perfectly still within range of the sensor, the switch will time out and the light will be turned off until you move again. Test your Ninja skills 😀

I can hear blackbird singing

range 10M still work ?

@juangizirian9810

3 күн бұрын

Are you having problems with height distance for it to work ?

THEY WILL ONLY SWITCH HALOGEN HIGH WATTAGE LAMPS. If you are thinking of using these on LED lights, forget it !! They won’t work. Halogen lamps work on resistive load sensors and LED work on capacitive load sensors. 🇬🇧🇬🇧🇬🇧

@FrogsAngelsLondon

3 жыл бұрын

Both of my LED lights on each side of the shed have been working perfectly since I have posted the video. IE: a year ago !!! Either capacitive or resistive, I am happy with that set up and will keep it that way. Thanks for the great advise anyway. Hope it helps others

@robertknott1124

Жыл бұрын

@@pigunderaroof . Well if that is what the specifications say, you are ok . My comments were based on the fact that I bought LED strips , same size as 500 watt originally in my lamp units and they didn’t work. After technical enquires, I was told about the resistive as opposed to capacitive loading and bought new LED drivers.

@johngratton467

Жыл бұрын

@@robertknott1124 LED compatible up to 300w load, Rob

I am appalled at the level of OR LACK of safety in this video clip!, the Plug wire is NOT SECURED and there is clearly an attachment of wires using 'Electrical tape' ...how anyone can profess to show thousands of people how to connect an electriacl circuit using clearly unsafe wiring/plug is really beyond my comprehension.

@steveydent

4 ай бұрын

what is an Electriacl circuit Missysmith expert?

It was going well until you starting twisting the wires.

Mantap