Hey Bro, just saw the vid and thanks for taking the time to make them. Sorry about the rifle, that sucks. I know the feeling when you wait a long time, have high hopes and its crap (Hence, Christian Arms Ranger 22 that I had to sell)…I bought a Begara because of ur vid and its awesome. Not one problem with it. I also have a Vudoo with a Proof barrel. The rifles action had some issues but it wasnt the barrel. Vudoo took care of the issue in the action and covered all shipping. They even upgraded some parts at no cost. It shoots awesome now and no issues. Hope everything works out for u.

@coreyd1474

3 жыл бұрын

i ended up selling it. i have filled out a vudoo order sheet about 20 times but am having a tough time pulling the trigger on a 2k gun that i'll have to wait 20 weeks for ya know?

Great honest review. Makes me happy I am having Kenny build me my rim x build. He sources out everything so he controls every aspect. Hope you get it sorted out and it becomes everything you expected.

@coreyd1474

Жыл бұрын

yea after another round of gunsmith fixes i sold it. went with a vudoo. should have done that from the beginning its a superior rifle.

@briansupermag3918

Жыл бұрын

@@coreyd1474 did you do a video on that vudoo? Would love to see it.

@coreyd1474

Жыл бұрын

@@briansupermag3918 yes. two so far

Hope you get your rifle sorted out! I just got myself a B14r Carbon and I’m excited to test it out.

@coreyd1474

3 жыл бұрын

i love the b14r. best all around 22 for the money no doubt.

Thanks for the honest explanation of your experiences. I've seen the frustration a missfeed in a rimX can cause during a match since the fixed extractor doesn't let you push feed a round that may have jumped in front of the claw. I ran a rimX for a few weeks and quite liked it, it had a PVA barrel and was in an MDT ACC, never had any feeding/extraction issues. The rimX mags are better than the Vudoo mags for sure. Hope you figure out the issues, would be interested in an update video!

@coreyd1474

3 жыл бұрын

thanks for the comment. when it was in the MPA it didn't seem to have the feeding problems so for whatever reason maybe they just don't fit properly in the manners. i cut my losses on this one and sold the barreled action. running a savage b22 precision now until i decide if i wanna spend the money and wait time on a vudoo three 60.

@Plainsimple67

2 жыл бұрын

@@coreyd1474 SMART MOVE, SO FAR RIM X VIDEOS I HAVE SEEN, MOST OWNERS HAVE BEEN "RIMMED" BY THEM!!🥴

@coreyd1474

2 жыл бұрын

@@Plainsimple67 i'd like to try that unltimatum deuce action but that has adjustable mags too which makes me reconsider spending the money

That’s a big step up. Nice rifle

@coreyd1474

3 жыл бұрын

yea it really is nice to look at

I just had this same problem with my Vudoo and Bartlein that I got a couple of months back. First range trip I was giggling like a school girl at one hole groups at 50. Now with the same lot it slings them like yours that opened up. Going to take apart and check all torque values on rifle and scope

@coreyd1474

3 жыл бұрын

thats strange. wonder what's going on with yours? don't hear that much from bartlein barrels.

@kevinmorrison9063

3 жыл бұрын

@@coreyd1474 not saying it’s the barrel. I’m just saying that sometimes it can be something small or hidden. Once I had a spigot mount screw touching the barrel and throwing off harmonics and I have also had loose screws on scope or rifle possibly cause it. We k ow our .22lrs haven’t shot out the barrel. You may have said but did you check to make sure the crown didn’t get damaged or have debri?

@coreyd1474

3 жыл бұрын

@@kevinmorrison9063 i actually just got it back from the smith. they basically redid the whole barrel from the chamber to the crown. haven't got a calm day yet to get out and do a new video.

I have a left hand rimx with a patriot valley 1:12 that out shoot my sons vudoo. In the beginning I had feeding issues, they sent replacement extractor and spring no problems since. I would say the chamber is cause of accuracy issues. It’s my understanding that proof made some pre-fits that weren’t quite right. The guys at zermatt are great to deal with, I wouldn’t hesitate to give them a call.

@coreyd1474

2 жыл бұрын

i had a new chamber cut and it still wasn't how it should be. proof wanted the whole rifle and i just didn't have the time or patience to send it back on my dime again.

Any chance that you will add a CZ457 to your fleet ? You’ll love the 10 round magazines: compact, easy to load and no feeding issues.

@coreyd1474

2 жыл бұрын

i had one when they very first came out. varmint version and the performance was shitty. before i got my vudoo i had in stock notifications set on a few area 419 built 457s but they have been out of stock for the better part of 6 months.

glad to your back bro. sorry your rifle sucks hope you get it all worked out.

@coreyd1474

3 жыл бұрын

thanks! me too, this build looks way too good to be as bad as it is LOL

I have a Kidd super grade that is doing the same thing. 4 through the same hole then the 5th it goes where it wants. I have tried all kinds of ammo, mounting screw torque, and two different suppressors nothing helps. So I’m looking at picking up a Vudoo do you have any experience with them? I’m nervous at spending that much and not much improvement.

@coreyd1474

2 жыл бұрын

i have shot with a ton of people who use vudoo. 90% of them have feeding issues as well but i don't see much of the accuracy issue. they perform well in that area. 5 month lead time for them though.

How do you feel about Zermatt Arms? I love my Bergara b14r got it thanks to your review. I was planning on building a 6mm creedmoor using Proof barrel and Big Horn Origin Action. Would you suggest against it?

@coreyd1474

3 жыл бұрын

first of all i'm glad you like your bergara, its the best 22 for the money and you can't change my mind. as far as zermatt goes the action itself is VERY smooth, probably the smoothest on the market so i'm sure it would be just as good if not better. i am still having feeding issues with it but you won't have those with a center fire, at least i hope not lol. as far as barrels go i've been disappointed with mine. it needed a lot of work and for the money it should not. i know proof makes solid stuff thats why i went with it but i've been more disappointed in that than anything. good luck!

@BulletBroker

3 жыл бұрын

Thanks man! I always appreciate a honest opinion.

@coreyd1474

3 жыл бұрын

@@BulletBroker hey no one is paying me yet or sending me stuff so i'll all be honest until then LOL

On a brighter note, how is the Bergara b14r holding up? Still holding strong groups?

@coreyd1474

3 жыл бұрын

yes it is. those are solid guns.

I don’t trust mismatching parts. I’ve seen to many issues. I dropped the ball on a complete custom voodoo. Main reason is that if there is a problem i feel comfortable that they will take it back and find out what’s wrong with it and fix it. Sorry to hear about your experience. I don’t buy custom guns so this one excites me and makes me very nervous. Have you got any updates on your rifle?

@coreyd1474

2 жыл бұрын

yea i learned my lesson the hard way here. cut my losses and sold it. got a vudoo about 1.5 months back and its fantastic. runs like a top and shoots lights out.

Hi Corey!.... how about an update on that beautiful, but disappointing rifle now? Were you able to get accuracy to improve, or is it a lost cause? Sure hope it shoots better now...

@coreyd1474

2 жыл бұрын

na it was pretty much a lost cause. i spent so much time trying to get it to just feed reliably and it wouldn't do that. would run perfect for about 100 rounds then start effing up again. and you know once you get a feeding issue with a rimx its a stage stopper. very disappointing

I hope you got this sorted out. I'm just building a Rimx at the moment. I was going to put a proof barrel in it.....but was told by a very reliable source that they are rubbish and very inaccurate. A barrel change might fix the accuracy....if you have done it already. Keep up the great video's. Tony Aust.

@coreyd1474

Жыл бұрын

yea i had a good gun smith re-chamber and crown it and it was BETTER but still was shit. vudoo fixed all my problems. should have went that route to begin with.

@tonyparker6650

Жыл бұрын

Update. I finally had my RimX completed....Shilen Barrel. The firing pin was too short which was causing a LOT of misfires due to light strikes. Made it very inaccurate. A friend of mine made me a firing pin for it.....fixed the problem and its now crazy accurate....just a hammer. Not that it matters now...but I'm sure your issues came down the that crappy Proof barrel. Glad the Vudoo put a smile back on your face. Cheers Mate

@coreyd1474

Жыл бұрын

@@tonyparker6650 glad yours worked out!

Hey dude any updates on the status of the accuracy of the rifle? Did you send it into proof?

@coreyd1474

2 жыл бұрын

it got slightly better after i got it back from the smith but still was pretty sucky. couldn't get it to reed either. proof wanted the whole rifle on my dime and i was just tired of spending money and time on it.

So that is way to nice a set up not to shoot. Maybe a little elementary but have you checked the barrels crown? Also I would check with the place you sent it for assembly and ask if they shimmed the action and barrel. KZread channel “the pursuit of accuracy” just put out video showing what/how different shim thickness can have on accuracy. Good luck and I hope you get this resolved.

@coreyd1474

3 жыл бұрын

i mean the crown looked ok to me but i'm not an expert. it's at a shop now where they actually know what they're doing so i should have it back next week. they're actually going to test it before giving it back. if it's all good i'll do a part 2, fingers crossed.

Was about to put together a near identical rifle, just with an 18in barrel. Might look at a bartlein instead 😬

@coreyd1474

3 жыл бұрын

YES go bartlein or PVA save yourself some headache. buy once cry once

Hi, Corey....well after many months of frustration with this proof barrel, did you ever replace the barrel with something else? Change the headspace (assuming one can do this with a rimfire?)

@coreyd1474

2 жыл бұрын

i decided to sell it and cut my losses. i'd already spent by far more than any person ever should on a 22 and couldn't get myself to send it BACK out and pay more freight to be worked on for a gun that should shoot a single hole group at 50 yards. went to the dark side and got a vudoo and it was a good choice.

@theoutlawjoseywales8711

2 жыл бұрын

@@coreyd1474 I know Rick at Isyour6covered loves his RimX .22 and he gets amazing groups with Eley Match...but his rifle came from Desert Precision Gunworks ( Kenny) with a Kreiger 22" barrel. Maybe your Proof barrel was the issue?

@coreyd1474

2 жыл бұрын

@@theoutlawjoseywales8711 according to the second gunsmith that actually gave a shit about it and tried to fix it the barrel was WAY out of spec. the action on rimx is fantastic don't get me wrong i just went about it the wrong way to begin with.

Hey man, any new stuff coming soon? Very excited to see what direction you go and what guns we see next.

@coreyd1474

2 жыл бұрын

i have a few in-stock notifications set but everything seems to be forever OOS and vudoo right now is up to like an 18 week lead time or something ridiculous.

@larryhardside7636

2 жыл бұрын

@@coreyd1474 Out of curiosity, whats your vudoo build look like?

@coreyd1474

2 жыл бұрын

@@larryhardside7636 i don't have one. i wish i did.

That’s a nice looking rig

@coreyd1474

3 жыл бұрын

looks good, feels good, doesn't shoot good

@RossPotts

3 жыл бұрын

@@coreyd1474 eh, it just takes time to dial in. Sometimes a lot of pews, too. LOL!

@coreyd1474

3 жыл бұрын

@@RossPotts its got probably 4k through it so far i gotta get a barrel vice to tune it myself

Corey! Did you fixed the extraction on your tikka tx1?

@coreyd1474

3 жыл бұрын

i sold that a long time ago but yes the guy that bought it did.

@DDyer526

3 жыл бұрын

@@coreyd1474 man, I finally found someone with the same problem I had in my tikka!! I sent it off 4 months ago and beretta just revived it 2 months ago and they haven’t even inspected it. Very upset with that. But I bought a b14r carbon a few days ago, and loved your review and ammo test with yours!

Ignore this post, just saw the comment on the Vudoo 360 video saying you sold the RimX. I'm going to leave the post in case it helps someone else. Did you ever end up sending the rifle in? My initial thoughts on potential issues: -Ringed barrel. If you had a bullet get stuck in the barrel and then the next bullet pushed it out, this would create a ring where the rifling is deformed. This can be checked by shining a flashlight from the receiver (bolt out) and looking down the muzzle. Look for a black ring. I have seen it many times, primarily on guns that have longer barrels and we're shooting lower quality ammo (but I have a box of CCI that is 10% bad, so who knows?) -Excessive headspace, you can check with feeler gauges -Barrel is improperly torqued, if it's loose and simply being held in place with some threadlocker, it may have developed misalignment/headspace issues after initial groups -Chamber is oversize, probably the best way to check is pin gauges. Second best by measuring fired brass OD vs fired brass from a known good chamber. It's possible the gunsmith failed to properly dial the barrel/reamer in, resulting in a crooked/oversize chamber. If the chamber is crooked, you would have to check it in a lathe Also, I know MPA makes an adjustable magazine catch that lets you control the height of the magazine in their chassis. Not sure if it (or something like it) would fit your stock, but that may be the fix for your feed issues. Sorry for the long post. Lol

@coreyd1474

2 жыл бұрын

having owned the two the rimx action is much smoother. but thats where the positives stop for me for the rimx over the vudoo.

Ouch!..... If that proof barrel still does not step up its game, I would try a Bartlein or an Ace. And.... is that a suppressor you have on it? Chris Simmons ( a No 1 ranked PRS Rimfire shooter in the Southeast) advises AGAINST using any suppressor on a .22 rifle because point of impact shifts occur inconsistently and randomly. The X-Ring (Ray) confirmed this on his KZread channel a few months ago. He, like Chris, stopped using suppressors on his Vudoo's for that reason.

@coreyd1474

3 жыл бұрын

right now its in a shop and they're gonna do some work on it but from my own testing on this on at least accuracy did not change but i know it makes a difference on others though. once i get it back and its working right i won't shoot it with the can.

Your first target(S) were awesome, then you get problems. Strange, what has the manufacture said on the accuracy?

@coreyd1474

2 жыл бұрын

proof wanted me to send the whole gun in to them. i just wasn't up for jumping through more hoops and spending my own money to make this gun perform how it should have in the first place.

“Sign of wealth” LOL true

@coreyd1474

Жыл бұрын

thanks for watching!

Wow. What a major F_ _king piss off for such a great looking set up. I took your advice and bought the KRG Bravo and installed it on my T1X and it shoots lights out with several brands of ammo. Was looking at upgrading but watching all the Utube videos on higher end customized rifles for the minimal difference in accuracy I have seen compared to my set up I think I will save my money and SANITY and enjoy my plinking. Hope you get it sorted out and get back to having some FUN!!!

@coreyd1474

3 жыл бұрын

here's my take away from all these 22s. the rimx action is by far the best but for overall quality and accuracy bergara is #1, tikka is a close second because that action is amazing. glad you like the bravo, hard to go wrong with those IMO.

@danielarnesen4662

3 жыл бұрын

@@coreyd1474 I am picking up my Bergara b14r carbon soon. I cant wait to see how accurate mine will be. Its been hard finding good ammo for a decent price. What is your top 3 22lr ammo brands to look at for the b14r?

@coreyd1474

3 жыл бұрын

@@danielarnesen4662 SOLID choice. i wish i had kept mine for sure i miss that rifle.

@coreyd1474

3 жыл бұрын

@@danielarnesen4662not trying to pump my own channel or anything but check out BOTH of my bergara reviews. did my carbon and steel barrel but without looking at them i think top was skrm, sk std, CX, and rws r50 (but this is very expensive but readily available.) My go to for matches was always skrm, performed well out to 500.

Corey, have you ever thought of broadening your horizons into pcp air rifles?

@coreyd1474

3 жыл бұрын

yes i have actually. the only thing holding me back is having to buy an air compressor to fill it.

@TimBiagi

3 жыл бұрын

@@coreyd1474 there is no easy, cheap way to fill them, scuba tanks are popular. Compressors can be had fairly inexpensively these day's and may be the better long term plan.

@coreyd1474

3 жыл бұрын

@@TimBiagi for NOW i will probably hold off, i have a fair amount of 22 ammo but if prices and availability stay like this i will look in to it more seriously. i know there is a ton of them that shoot lights out.

@TimBiagi

3 жыл бұрын

@@coreyd1474 I hear that, I love shooting my rimfires, but I have been discouraged by ammo pricing and availability and my search for an accurate rifle. A buddy of mine bought a fx dreamline and it easily shoots 1/2" groups at 50 yards and it made me rethink things for multiple reasons. Thanks for your time.

You just figured out your problem, if the rounds are not feeding properly , you are damaging the bullets. Was it a Prefit from proof?? If not the builder might not have chamfered the muzzle properly, If a pre-fit why did you have to send it too anyone to simple torque a barrel on?

@coreyd1474

2 жыл бұрын

it was a prefit yes. the first smith that originally put it together just torqued it down and said f it its good. it shot like absolute trash i'm talkin inch at 50 yards. had another smith take a look at it and they cut a new chamber and crown. did better but still not worth what i had in it. ruined me for shooting to be honest. all that money and it woulnd't even cycle let alone fire a round.

dayummm boy movin on up aww shit, sorry about the results man. Id be salty af too

@coreyd1474

3 жыл бұрын

yea hard not to be for the price and time spent. i actually got it back from a good smith but haven't got a chance to shoot it yet.

Check out Curtis Tactical Suppressors and Rifles. They are near Dayton and they built my RimX. That bolt should close with a little bit of tension. I’m sure they can fix it.

@coreyd1474

3 жыл бұрын

i will. thank you so much for the suggestion. calling them right now.

@coreyd1474

3 жыл бұрын

BTW thanks for the suggestion. SUPER nice guy and knows what he's doing. He's got it right now.

@stukpedal

3 жыл бұрын

Your welcome, I spoke to him yesterday and he told me that you dropped it off. They do great work, I’m looking forward to you testing it once you get it back. My RimX/Krieger averages .3” with CenterX. They also built my 6 Creedmoor, it shoots lights out, sub 1/4” at 100. They make some really nice suppressors also.

@coreyd1474

3 жыл бұрын

@@stukpedal yea i'm definitely looking forward to it. i told him that someone from YT recommended him but i couldn't remember the name LOL so i'm glad you talked to him. i think he's gonna get it out and shoot it to test so maybe you'll get to see it too. hopefully it'll shoot as well as yours!

@stukpedal

3 жыл бұрын

@@coreyd1474 Curtis Tactical posted on their FB page about the issues found. It was never going to shoot well the way it was, it should hammer when you get it back.

Fantastic looking rifle,that really does suck especially well you spend so much money chin up brother you'll work it out .

@coreyd1474

3 жыл бұрын

yea it really is a beauty. i just got it back from a competent smith, just waiting on a day where it's not 20 mph winds to test it

@glenthornley8217

3 жыл бұрын

@@coreyd1474 traded my rugger RPR on a cz in a mdt chassis With a carbon barrel love it shoots half inch groups all day

@glenthornley8217

3 жыл бұрын

@@coreyd1474 at 50 m

Just curious did you ever find out what was causing the accuracy issue. I seen you really like b14 r, Can you get different barrels for them and chassis?

@coreyd1474

2 жыл бұрын

the barrel was all out of spec from proof. i had a smith some what fix it but it still wasn't where it needed to be. i definitely wish i kept the b14r. i don't think you can get barrels for them but its a rem 700 footprint so you can stick it in any chassis that takes a 700.

If that rifles not fixed after you send it back. I’ll buy that stock off you. Haha. A friend of mine was at the lapua center today and they couldn’t find anything for his 457 mtr. But he asked to should his ammo (sk rifle match) and it ragged holed it.

@coreyd1474

3 жыл бұрын

I"ll take you up on that LOL but not sure you wanna pay retail! it's in a shop right now where people actually know what they're doing so i feel good about. Once this ammo crisis is over the test center is going to start selling SK again which is great. Can get a case for like 550.

@FlowBaka

3 жыл бұрын

@@coreyd1474 well retail or wait 15 weeks for retail. Haha and I didn’t know they sold sk. My friend said they could only sell lapua with they way their network is set up.

@coreyd1474

3 жыл бұрын

@@FlowBaka when I ordered a case of center x it came in less than a week. They 1000% have sk on their list but can't sell it until supplies are back up. I was just there a few weeks ago

Wow.. your pace of speech and language compared to previous videos. Hope you are ok.

@coreyd1474

3 жыл бұрын

LOL thanks for your concern!

That’s an expensive pice of shit😂you said it. Love your honesty

@coreyd1474

8 ай бұрын

do not buy any of these components just go straight to a vudoo and save yourself a lot of money and tears

Cory, I have not scrolled the comments, but if you have not seen the work of KZreadr "Eagle Eye Shooting", check out his current work with the RimX.

@coreyd1474

2 жыл бұрын

no i haven't. i don't have this rifle any more.

Take the suppressor off and shoot a group before spending money shipping it off. Also check the action screws torque.

@coreyd1474

2 жыл бұрын

Doesn't shoot any different with or without the can

Did you give up on this rifle? I know a gunsmith in ohio who can figure this thing out, in my opinion, the chamber wasnt cut correctly. Its not the first time ive seen a proof barrel shoot like shit

@coreyd1474

Жыл бұрын

oh yea this thing sucked. whos the smith?

@hebes4056

Жыл бұрын

@@coreyd1474 The gun smith is Greg Walley. He's actually a Zermatt dealer. Without seeing that rifle, my guess the problem was the barrel not the action. I have not been impressed with anything chambered by proof. I had a stock 10/22 barrel set back and a bentz chamber cut, unbelievable how much it better it shot. If the bullets were not jamming, I'd suspect that was the main problem. Feeding/magazine issues is another thing.

@coreyd1474

Жыл бұрын

@@hebes4056 yea the guy i took it to had to recut the chamber and crown and it just still didn't shoot well at all not to mention the manners had to be worked on to get it to fit just an all around awesome gun on paper that turned out to be complete shit

It's the Proof barrel not the action, they have had bad batch. I have a 18 inch Proof Competition Contour barrel on one of my RimXs my buddy has the same. Mine shoots lights out and his not. He sent his to Lapua as well and had the same problem. My second RimX has a PVA 12T and it shoots 0.3s at 100 yards.

@coreyd1474

2 жыл бұрын

yea the action was nice and smooth. i just didn't have the time, money, or patience to send it BACK out to be worked on for a THIRD time on my own dime. lesson learned. i know those PVA barrels are really nice i wanted to get one when i was building this but they were just like everything else. OOS

Very nice looking unit shame about groupings.

@coreyd1474

3 жыл бұрын

yea its beautiful. its at a smith now who actually knows what he's doing so hopefully i'll have a good showing for part 2.

I just checked out the Curtis tactical fb page about what was up with your barrel and all I have to say is WTF is going on at Gunware. I'm in MO and shoot both MOST centerfire and rimfire matches and I know a few guys (good people) that are sponsored by them, that's a complete shame that came from my state. I know my gunsmith had some issues with rimx and apparently zermatt changed up the specs and he was having issues with the headspacing being too deep aswell, to the point they wouldn't even ignite the cartridge. I've heard of quite a few guys I shoot with having accuracy and feeding issues like you and they were quite pissed off, and understandably so. All of these horror stories are why I got a vudoo 360 and while it shoots excellent, vudoo cerakoted the inside of the action and made it a binding fucking mess. It wasn't just mine either, 3 other local guys all are dealing with the something I am. After cycling the action probably 15k times and a little bit of toothpaste on the bolt it has slicked it up quite nicely but for a $1900 barrel action and 6 month wait, it's fucking bullshit. CZ can give you a nitrided barreled action for $500. My the impact 737r on my 6 dasher is dlc coated and the barreled action costed just a hair over $2100. But vudoo can't even be bothered to shove a dowl inside the action before cerakoting

@coreyd1474

2 жыл бұрын

i would love to have a vudoo but i don't want to wait 5 months to get it. i have been very seriously considering a ultimatum deuce action BUT the mags on those are adjustable too which makes me really nervous. don't want to have another debacle like this especially for the price you pay for these barreled actions.

Thanks for your candor about your results with this Rifle. This sort of thing can be very frustrating and after spending that level of money I don’t blame you for being angry. I would be too, and as far as I’m concerned you can leave the language in as it helps convey What it’s like to deal with this. You should not have had these problems after investing this amount of money

@coreyd1474

4 ай бұрын

yea lesson learned the hard way. that lesson is money doesnt buy you accuracy. the stock didn't fit well and the barrel sucked. should have just stuck with the bergara. althougt my vudoo is the best 22 i've ever shot.

@jeffdavis7356

4 ай бұрын

I’ll have to check out the Bergara rifles.

@coreyd1474

4 ай бұрын

b14r is by FAR the bust gun for the money and endless aftermarket for it since its rem 700 footprint. @@jeffdavis7356

I’m thinking where the barrel is attached to action. That’s where the action happens. How about credible gunsmith reattach barrel. What about your crown? Get damaged?

@coreyd1474

3 жыл бұрын

i actually just got it back from a credible smith that pulled the barrel in and recut the chamber and fixed the thread depth on the barrel for the suppressor plus put a new crown on it. needless to say it was all effed up.

@sekaf4125

3 жыл бұрын

So I’m curious. Have you shot since the fix?

@coreyd1474

3 жыл бұрын

@@sekaf4125 i have but i haven't really sat down and retested at 50. cant find a day that isn't 20 mph winds. i had it out last weekend we were messing around out to about 327 and that was no problem.

@sekaf4125

3 жыл бұрын

Good. I’m hopping it’s an absolute tac driver, the way it should be. I just got a call from Vudoo. My gun is being shipped. I to am very excited. I wanted the manners stock like you have but it’s 6 months out with manners

@coreyd1474

3 жыл бұрын

@@sekaf4125 check altus. thats where i got this one from. they had a few different colors in stock. was kinda disappointed tho they say it'll accept a heavy palma contour barrel but this one hit about half way down the barrel channel and needed to be worked by the smith. for 1300 you expect no issues.

Just for fun try a different scope. These groups all over the place with no consistency is screaming bad turrets to me. Colin Noir was doing AR training with a very time tested gun when out of nowhere he couldn’t hit a damned thing.

@coreyd1474

2 жыл бұрын

i cut my losses with this gun a LONG time ago. upgraded to a vudoo. should have just done that in the first place.

Guys have gotten 1-ragged-hole groups at 100yds with a Ruger 10/22 using Aguila 40gr bullets. Why spend all the money? It's all about chamber, harmonic tuning the barrel, cartridge crimp, concentricity with bore, and sorting the ammo by diameter and weight. Sorry about the results. That's horrific for the cost put into that thing. Maybe this dude will shed some light on 22LR tips- kzread.info/dash/bejne/fIOir7Whh9nSn8Y.html

@coreyd1474

3 жыл бұрын

yea i know there is some good 10/22s out there i WOULD say reliability would be an issue but considering i can't get this thing to feed i'd just be eating my own words LOL. it's in a shop now where they actually know what they're doing. So if all is good when i get it back i'll do a part 2.

That sucks man. My $450 savage would outshoot that rifle with bulk ammo. My Win 52D barely opens 1 hole up with 10 round groups at 50 yds.

@coreyd1474

3 жыл бұрын

yea i have a savage b22 precision that shoots basically one hole groups and i bought it for 400 bucks lol

Fuck that sucks feeling your disappointment

@coreyd1474

Жыл бұрын

good thing this rifle is long gone. the vudoo is running 100%

Sounds like a bad barrel. Try a Kreiger with a EC tuner

@coreyd1474

3 жыл бұрын

definitely not what i expected from proof. probably won't go with them any more in the furture.

Man focus on that trigger squeeze bud!

@coreyd1474

Жыл бұрын

thanks for watching!

Take the can off.

@coreyd1474

3 жыл бұрын

didn't make any difference what so ever on how this rifle performed.

Dude, that is super disappointing. My Marlin 925 shoots better than that! Definitely have a smith dig through it and tighten it up.

@coreyd1474

3 жыл бұрын

i think any 22 shoots better than this LOL. it's in a shop right now where they actually know what they're doing so hopefully he can hook me up.

@shifty6br368

3 жыл бұрын

Nice rig brother..sorry to hear about your woes. Not to add insult to injury but I had my rim x built with a 14tw hart bedded into a Manners t4a and it shoots absolutely lights out with different ammo across the board and it runs like a top. It was cut with an eps reamer and smithed by Jonathan Elrod at Modocam, he does absolutely fantastic work especially with his background in .22lr 40x repeater conversions. Hope you can get things worked out, I absolutely love my rim x and it is in the top 3 of most accurate rifles I own, being I have several builds of similiar style. Oh wanted to add...I have a Proof 6arc stainless and it has been less than stellar in the accuracy dept..not sure what's up with proof lately.

Change the flipping barrel quit crying Learn to assemble your own actions That's the nice part about Zermat actions

@coreyd1474

3 жыл бұрын

thanks for watching!

😂😂😂😂 LOVE THE LANGUAGE, HOWEVER I CAN UNDERSTAND YOUR FRUSTRATION!!! All that money and that??!!🤷‍♂️🤦‍♂️ AN ABSOLUTE SHAME IS AN UNDERSTATEMENT!!😒 I AM GLAD I SAW THIS VIDEO THIS MORNING, I AM STAYING THE HHAAAIIILLLL AWAY FROM THIS ACTION AND BARREL.

@coreyd1474

2 жыл бұрын

yea i mean i know proof makes good stuff but this one sucked ass to put it kindly.

Jesus 😒

@coreyd1474

Жыл бұрын

thanks for watching!

@kessler89canampowa

Жыл бұрын

@@coreyd1474 365 day delay who dis?

@coreyd1474

Жыл бұрын

@@kessler89canampowa trying to clear out all the old comments but its losing battle