z Automotive Tazer Full Reboot Instructions

Автокөліктер мен көлік құралдары

In this video I go over how to properly do a full reboot after any setting change on the z Automotive Tazer. Your dash will reset twice and at least one full sleep cycle is required and in some cases two. These settings are changed with the car in the run position BUT THE IGNITION NOT RUNNING!
+++++++++++++++++++++++++++++++++++++++++++++++++++++
Shocka252 on the beats!
My Instagram : mdg_collections

Пікірлер: 64

  • @2010svtraptor
    @2010svtraptor6 жыл бұрын

    First, lol

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Yea you drive a WIDEBODY HELLCAT that I named the HELLDEMON for you so of course you're going to be the first LMAO!

  • @2010svtraptor

    @2010svtraptor

    6 жыл бұрын

    MDG Collections 😂

  • @usmc8408
    @usmc84083 жыл бұрын

    Thanks so much for this! The instructions seem simple enough but it's always nice to see it done just to make sure!

  • @MDG_Collections

    @MDG_Collections

    3 жыл бұрын

    Thanks for watching 👀! Make sure you're subscribed!

  • @arnmoore1705
    @arnmoore17054 жыл бұрын

    Awesome demonstration 💯

  • @MDG_Collections

    @MDG_Collections

    4 жыл бұрын

    Thanks man. I appreciate you watching this older video!

  • @rc4runner
    @rc4runner2 жыл бұрын

    Best reboot video. Thank you!!!!!

  • @MDG_Collections

    @MDG_Collections

    2 жыл бұрын

    Anytime! Make sure you're subscribed

  • @blackvelvettcb
    @blackvelvettcb Жыл бұрын

    Thanks, brother. I just bought the Tazer and woke up to a dead car battery. I saw in the instructions that z automotive says you have to do a full reboot after a change but for some reason I had it stuck in my head that would reset the whole system back to factory settings.

  • @DemonDurango
    @DemonDurango6 жыл бұрын

    Great info my brother

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Thanks brother!

  • @SixTwoHemi
    @SixTwoHemi6 жыл бұрын

    I wish they would make it so I can keep my 6.4L splash screen and keep SRT pages.

  • @BBHemisnJets
    @BBHemisnJets2 жыл бұрын

    Awesome demonstration MDG 💯 thxs BB

  • @MDG_Collections

    @MDG_Collections

    2 жыл бұрын

    Thanks for watching

  • @392dan4
    @392dan46 жыл бұрын

    Good info man👍👍

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Thanks

  • @youknowwhyimhere2307
    @youknowwhyimhere2307 Жыл бұрын

    I thought it could clear the engine light

  • @TboneSRT
    @TboneSRT2 жыл бұрын

    hey man when adding a custom light show to the tazer, do you have to do this full reboot? thanks! and great video

  • @IjohnnyproI
    @IjohnnyproI6 жыл бұрын

    Very informative. Like #19

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Thanks man. That's what i strive for.

  • @inkdbyworm1777
    @inkdbyworm17772 жыл бұрын

    This works for 2015 RT’s

  • @El.gato717
    @El.gato7172 жыл бұрын

    Hey I had a question? I have a 2020 Dodge Charger scat pack bought the double bypass was messing around with and now I can't access it my srt pages don't work my cruise control don't work I already bought an oem cruise control and installed it and it still don't work is there anything you think I can do? my car is in black mode basically. thank you

  • @tonycolon67
    @tonycolon676 жыл бұрын

    Hey bro man good stuff as usual....... I've gotta ask ... seen a video and homie is saying the tazer in ecco mode saves a gang of gas.... i'm wondering does the ecco mode work on R/T's too?

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Yes it does man. Saves big on gas on the RT also. Thanks a lot for the support.

  • @tonycolon67

    @tonycolon67

    6 жыл бұрын

    Thanks man for the all the great info!!!

  • @rontorres6320
    @rontorres63204 жыл бұрын

    I installed the tazer to my 2018 392 daytona and didn't reboot but all the changes I did like yours still in affect .. Srt mode is my startup mode .. Cluster starts up with my hell cat symbol n SRT on radio screen..do I still have to reboot is my main question.

  • @MDG_Collections

    @MDG_Collections

    4 жыл бұрын

    A full reboot is only needed with a full sleep cycle or two when changes don't go into affect right away but you should still do it so changes don't change when you turn your car off and back on again

  • @ALEJANDROWANTED
    @ALEJANDROWANTED5 жыл бұрын

    My performance pages don’t work on my 2016 charger R/T

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    I would try a full reboot and let the car go through a sleep cycle or two.

  • @ALEJANDROWANTED

    @ALEJANDROWANTED

    5 жыл бұрын

    Well I have the base R/T 2016 charger

  • @SRTDB392
    @SRTDB3923 жыл бұрын

    what’s up homie? I installed the Tazer yesterday & track mode popped up but I can’t switch the transmission settings. only steering & traction

  • @MDG_Collections

    @MDG_Collections

    3 жыл бұрын

    You may need to perform a full reboot

  • @xor9397
    @xor93974 жыл бұрын

    I have questions win I pot run the market check engine Light up 10 time and stop Is there a problem I have hellcat 2016

  • @MDG_Collections

    @MDG_Collections

    4 жыл бұрын

    What???

  • @smileselvis3988
    @smileselvis39886 жыл бұрын

    Do I have to let it sleep cycle twice to have track mode steering be stiff I'm having an issue with it being way too loose

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    I would try that to be honest. If it still doesn't work you need to perform a full reboot then sleep cycle again.

  • @smileselvis3988

    @smileselvis3988

    6 жыл бұрын

    Ok I'll try it cuz in just using custom settings where I have sport mode for steering

  • @ojllk1446
    @ojllk14465 жыл бұрын

    hi any one can help please may car 2017 dodge charger rt 5.7 l how i can fix airbag light on after i use zAutomotive which option you have to disable to turn the air bag light of

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    Take off the hellcat splash screen if you're using it.

  • @ojllk1446

    @ojllk1446

    5 жыл бұрын

    ​@@MDG_Collections thank you ​ MDG Collections i try tomorrow

  • @davidtolbertiv6446
    @davidtolbertiv64465 жыл бұрын

    @MDG Collections I am having trouble mdg, I have a 2018 Daytona Charger, the double bypass tazer is hooked up but when I went to my audio settings, I don’t have the area that says preferences, it’s hooked up because it shows the firmware of the tazer but I can’t get into the performance settings, what do I do ?

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    Not really sure what you mean by the setting preference???

  • @davidtolbertiv6446

    @davidtolbertiv6446

    5 жыл бұрын

    MDG Collections I’m saying I don’t have the performance page when I toggle so it’s not letting me get the SRT settings, I have the marry and un marry mode and then it skips to the tazer software

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    @@davidtolbertiv6446 I'd try a full reboot and let the car go through a sleep cycle or two. Check my Tazer playlist for that how to video.

  • @davidtolbertiv6446

    @davidtolbertiv6446

    5 жыл бұрын

    MDG Collections should I have done a full reboot as soon as I hooked up the tazer or should it have already been able to go to the audio screen and srt choices to be toggled through ?

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    @@davidtolbertiv6446 no you do it after ANY change. That's your problem.

  • @BenjitheFrenchie
    @BenjitheFrenchie6 жыл бұрын

    Where can I get that plate cover

  • @MDG_Collections

    @MDG_Collections

    6 жыл бұрын

    Check out my dashcam install video and all their info is in the description. The sell the shade plate and install them there. I don't know it by heart.

  • @64Stangman
    @64Stangman3 жыл бұрын

    Do I need to do a full reboot when I unmarry, and take my auto back to the dealer?

  • @MDG_Collections

    @MDG_Collections

    3 жыл бұрын

    You definitely do because unmarrying is still a change and a reboot is needed after any change in order for that change to take affect.

  • @15DurangoRT
    @15DurangoRT4 жыл бұрын

    How long does it take to reset back to factory specs?

  • @MDG_Collections

    @MDG_Collections

    4 жыл бұрын

    Immediate

  • @elephantzrmpodcast
    @elephantzrmpodcast6 жыл бұрын

    Where do you get one of these?

  • @eng-husseinjassimjalal1038
    @eng-husseinjassimjalal10383 жыл бұрын

    hi dear i was have charger RT 2019 work normal and now i have charger RT 2018 Tazer not work never my car not read the Tazer >>why ?? what can i do im from iraq

  • @eng-husseinjassimjalal1038

    @eng-husseinjassimjalal1038

    3 жыл бұрын

    i think my tazer hack becoz it work light show when it the movement

  • @jamesarnp
    @jamesarnp Жыл бұрын

    so for the 2 sleep cycles, do you hit "reboot" the second time too or just let it do a second sleep wake cycle?

  • @MDG_Collections

    @MDG_Collections

    Жыл бұрын

    *Yes you have hit reboot again for the 2nd sleep cycle!*

  • @davidtolbertiv6446
    @davidtolbertiv64465 жыл бұрын

    I have been in contact with z automotive, they told me something about marrying and unmarrying the tazer? What does that mean, what is marry and un marry in the dodge settings, please help with this

  • @MDG_Collections

    @MDG_Collections

    5 жыл бұрын

    Please check out my Tazer playlist. I've done full videos on this already. Thanks for the support!

Келесі