No video

Your Car's Tune DEPENDS On This ONE Sensor

Your vehicle's computer looks at the Oxygen Sensor to know whether it is fueling correctly or not. If the sensor goes a little south, the computer won't know but will fuel according to what it "sees." I change these after 10 years.
Changing an O2 sensor on a 2006-2011 Hyundai Accent.
CGSCULIT SC301 Scan Tool:
www.cgsulitsto...
Save up to 20% with this code: www.cgsulitsto...
"Jelly Bean" The Happy Hyundai:
www.gwellwood....

Пікірлер: 15

  • @The_Performance_Laboratory
    @The_Performance_Laboratory7 ай бұрын

    I've used a similar slotted deep socket to remove stubborn old HEGO sensors, and found that with the really, really tight ones, the socket would spread out and strip things. Using a hose clamp around the bottom of that socket fixed that issue, so a tip for you if you ever run into the same situation.

  • @GregWellwood

    @GregWellwood

    7 ай бұрын

    If I was really in a pinch, I'd just cut the wire off and use a regular socket. They don't need to be that tight going in.

  • @brianbayer9746
    @brianbayer97467 ай бұрын

    The biggest change in mine occurred when I cleaned the idle air controller, was really carboned up & would not move fully through it's cycle. 15 minute fix at no cost except a bit of brake cleaner. Off idle acceleration dramatically improved & even improved the ticking the top end did, all though I don't know why.

  • @Maplecook
    @Maplecook7 ай бұрын

    Thanks for posting this, my G! This summer, I'm gonna be doing the O2 sensors on my EF and on the Celica.

  • @rtkracht
    @rtkracht7 ай бұрын

    Thanks man! Have a Happy New Year 🎉🎉🎉

  • @repaleonhalo9754
    @repaleonhalo97547 ай бұрын

    Does this make your temperture jump up and down?? If the car adds to rich fuel?

  • @GregWellwood

    @GregWellwood

    7 ай бұрын

    A lean engine _may_ run hotter, but if the temp is jumping around, that's a cooling system problem, not an O2 problem.

  • @postedandelivered
    @postedandelivered6 ай бұрын

    is this the in or out sensor that you replace?

  • @GregWellwood

    @GregWellwood

    6 ай бұрын

    Upstream. It's the one that the computer looks at to tweak fueling. The downstream one tells the computer if the catalytic converter is working.

  • @allanenders5525
    @allanenders55257 ай бұрын

    So which O2 sensor is responsible for the fuel trims, upstream or downstream? My luck it will be both😂

  • @GregWellwood

    @GregWellwood

    7 ай бұрын

    Upstream (closest to the engine) controls the tune. Downstream (the one after the catalytic converter) only checks that the cat is working.

  • @markr478

    @markr478

    7 ай бұрын

    upstream does all fuel calculation

  • @goptools
    @goptools7 ай бұрын

    Wow, except for being tiger tight, that was simple to change! You didn't have to struggle under the car, try to find the stupid thing because it's out of sight, on top of the exhaust pipe, or any of that nonsense. It's almost like Hyundai knew you would be changing it someday!

  • @GregWellwood

    @GregWellwood

    7 ай бұрын

    I'm thoroughly enjoying these Accents. Fun to drive, easy to service, stupid simple. I started my apprenticeship at a Hyundai dealership and thought I'd never recover, but Hyundai has really come a long way from the 80's.

  • @goptools

    @goptools

    7 ай бұрын

    I had a friend who had a very early model. It literally rattled itself apart. Good to know that they have improved since then!@@GregWellwood