Here is the Unboxing of the Yongli sword Handmade Short Katana Japanese Wakizashi Tanto Yongli Sword Wakizashi T10 Steel Purchase here! www.amazon.com/shop/veganjutsu
Жүктеу.....
Пікірлер: 193
@heymr-matthewmaier3 жыл бұрын
I really like your energy, I stumbled upon this video last week and referenced it again tonight, I shall be looking through your channel. I expect more great content, keep up the good work
@VeganJutsu
3 жыл бұрын
Thanks for your kind words friend
@nicksluder47642 жыл бұрын
Good review and that thing looks nice. Been looking for a decent budget wakizashi and I think I'm gonna go with this one. Thanks for posting this and sharing the info!
@VeganJutsu
2 жыл бұрын
Thanks for the comment friend 💜⚡️
@kokyensoh3203 жыл бұрын
I have also gotten myself a cheap but decent T10 tanto. Not bad at all. Guess T10 steel is the key
@VeganJutsu
3 жыл бұрын
Yes good steel usually translates to a good blade. I'm very happy with this cheaper blade. Blessings
@Svet692 жыл бұрын
Great looking Wakizashi, man. I got myself a T10 tool steel katana for only $157. You are exactly right and I also mention this in my video - most modern steels are WAY superior to the traditional medieval tamahagane steel. Too bad katana cultists can't get this through their head.
@cody3362
2 жыл бұрын
Where did you get said katana
@Svet69
2 жыл бұрын
@@cody3362 hi, I have linked a few katana's in my video's description. Check them out, they are all under $155.
@cody3362
2 жыл бұрын
@@Svet69 thank you so much
@VeganJutsu
2 жыл бұрын
Thank you for the comment I will check out your videos!
@bogdantomic9453
Жыл бұрын
Well made tamahagane katana could put 10 cm hole in steel helmet without rolling chipping or scratching. You have documentary about that. Btw traditional katana have good balans and geometry since they are forged and not grinded. I don't see how tamahagane(high carbon) blade with superior geometry is worse than some trash modern blade with bad balance and fittings that are made from crap and not right size.
@ProjectAnubisUSA2 жыл бұрын
Cool, good ideas on use just what I was looking for!
@samson57913 жыл бұрын
Great video and awesome techniques using the sword
@VeganJutsu
3 жыл бұрын
That's very kind thank you friend
@samson5791
3 жыл бұрын
Vegan Jutsu look like a true Samurai with those moves. You got me practicing now. Take care 👍
@tomhughes51233 жыл бұрын
Yep its clay tempered , but i doubt very much its t10 for $100 i can see you hurting yourself with that , you cant tell its tool steel unless you you get it rockwell tested , t10 is reserved for expensive blades , if it scratches during messing with it its carbon steel , tool steel doesnt scratch up
@VeganJutsu
3 жыл бұрын
We can't really trust anything unless we forget it our selves. In another video I baton through hard wood and it holds up well. Cheers
@AzazelBathory Жыл бұрын
I really like your vibe and how you think, I have no blades anymore but wish to get back into it. I prefer shorter blades like this that in my opinion are better suited for high agility, fast paced movement. Thank you for the video!
@lukeskywalker27383 жыл бұрын
Great review!!!
@VeganJutsu
3 жыл бұрын
Thank you Master
@danielthesaint3 жыл бұрын
Nice Video👍 Might get myself one.
@ConsciousBrosCommunity3 жыл бұрын
Subscribed before watching cuz vegan. Nice, informative and helpful video tho :)
@VeganJutsu
3 жыл бұрын
I appriciate that fam!! Much love
@CheetahPaw172 жыл бұрын
No cut test?
@VeganJutsu
2 жыл бұрын
I've beat this blade to Valhala and back. Check out my videos! Still haven't sharpened it and still sharp blade. When it no longer cuts I will sharpen to 30,000 grit virtuvice style
@erichusayn4 жыл бұрын
Good video dude. Never heard of them before. Will be interesting to see how she holds up. Lots of those amazon blades have issues with either being too hard or too soft. Hopefully this one is a good one...
@VeganJutsu
4 жыл бұрын
Hi thanks a lot, I made an update video after one week of use. The blade is holding up well but there has been some issues. Train well
@erichusayn
4 жыл бұрын
@@VeganJutsu welcome
@bbwiebz39943 жыл бұрын
That cold steel kris needs a good sharpening, it should cut that packaging tape with one motion.
@aBANDIT.3 жыл бұрын
aye at the end of the day even of it isnt t10 it looks awsome
@paulthecabs89293 жыл бұрын
This is the very first video I’ve watched from you when you still had 400 subscribers and I’ve been subbed ever since, and I do not regret that decision hahaha
@VeganJutsu
3 жыл бұрын
Yo that's awesome I appreciate you 💜⚡
@ronisworld29162 жыл бұрын
beautiful! nice slash too! wish you got the measurements though, but thanks for sharing!
@VeganJutsu
2 жыл бұрын
Thank you! It was my first video
@AgouraSteve3 жыл бұрын
Read the reviews and look at the review photos. The tsuka is glued on, looks like it’s not exactly full tang. I hope you never want to disassemble. :)
@VeganJutsu
3 жыл бұрын
Yeah if you look at my updates I actually rehandled the T10 blade to an axe handle. And it's awesome!! 😍😍
@AgouraSteve
3 жыл бұрын
@@VeganJutsu oh. That’s interesting. Cool.
@gunnerhiro3942 жыл бұрын
So u think T10 is better than the best samurai swords of old?
@VeganJutsu
2 жыл бұрын
In many cases yes but not all
@evqn_who19153 жыл бұрын
Can you cut with it like is it real or fake blade
@VeganJutsu
3 жыл бұрын
Yes it cuts I have alot of cutting videos with it in my youtube shorts.
@christopherroberts43263 жыл бұрын
One sword? Laughs in Musashi
@VeganJutsu
3 жыл бұрын
They kind of multiplied since I made this video 😅📈📈
@b-real754 Жыл бұрын
What kind of Wakizashi was the other one. Great video
@ТУМАН783 жыл бұрын
Good video
@VeganJutsu
3 жыл бұрын
Thanks shinobi fam ☺
@un1te4llppl3 жыл бұрын
Make sure no one comes walking in the room. In Sha allah
@ilijabosnjak763 жыл бұрын
Hello young fella is that from Shi Jian?…
@VeganJutsu
2 жыл бұрын
I'm not sure but it's possible
@unklemike5012 Жыл бұрын
Has this held up? I'm so tempted. I want a Waki so bad lately, but I don't want to pay a respectable price because I don't know if I'll like it. The colors look exactly like what I would want. The price is right.
@VeganJutsu
Жыл бұрын
The blade is great and still holding up. I did have to re handle after only one month of use but the T10 blade is still running smooth
@lkoulamit2 жыл бұрын
Where can I buy the really good katana?
@VeganJutsu
2 жыл бұрын
Its from kult of Athena
@bobbywonder4574 Жыл бұрын
I love it
@uexkeru Жыл бұрын
Looking at the handle wrap materials on these swords and wondering if it's possible to get a company to test out a handle wrap like on the CRKT Obake line of knives. Those knives use a kind of imitation rayskin wrap, but they're epoxied in place and more solid than a real leather wrap. If that concept works on a sword wrap it'd not only be vegan friendly but possibly stronger than traditional materials, almost never needing to be re-tightened. This would also challenge the fear that sword companies have to make "high end" stuff with non-traditional materials and not make it look like something out of a zombie movie If swords were still serious battle weapons, they'd def be made with the kind of synthetic materials used on high end sports equipment like tennis rackets, given that natural leather is vulnerable to moisture and temperature changes.
@nolife097 Жыл бұрын
I bought a katana with carbon steel and it costed me around $350 something I think it's also tempered
@VeganJutsu
Жыл бұрын
Sounds awesome! I just ordered a new T10 katana for $150
@nolife097
Жыл бұрын
@@VeganJutsu Jesus you’re still hearting and replying now that’s dedication. Also I have a T10 katana it’s pretty good also mate how do you recommend sharpening a katana since my old whetstone is gone is there like another way or do I have to buy another whetstone
@VeganJutsu
Жыл бұрын
@@nolife097 you don't have to buy new stones, although it requires a bit more finesse. The bottom of ceramic mugs are about 1000 grit. I usually use a ceramic mug to touch up blades. But with a longer blade length it's not ideal. You could try and find ceramic plant pottery with a wider more flat base and use this as your abrasive stone. There's is alot of other ways including using wet sanding paper secured to a flat base and working through more finer grits.
@nolife097
Жыл бұрын
@@VeganJutsu got it thank you
@MLMWarriors Жыл бұрын
Nice
@absyafq_ts21123 жыл бұрын
Your knife is a keris, in indonesia.🇮🇩 Nice knife, nice katana.
@VeganJutsu
3 жыл бұрын
Thanks I love that keris knife alot!
@powerplay4real1742 жыл бұрын
I just may give them a try for one of those. 😎💰⚔️💰😎
@b-real754 Жыл бұрын
What is the overall size of Wakizashi
@JR-ld1et3 жыл бұрын
That's what she said.....now ....I do like the length of it... LMAO ...I do like the width of it 🤣🤣🤣🤣🤣
@lishandealwis4273 жыл бұрын
total length of the entire new wakazashi pls?
@VeganJutsu
3 жыл бұрын
I cannot measure as I've fitted an axe handle to this blade. The manufacturers specs read as follows: Overall Length: 30″, Blade Length: 20 1/2″, Handle Length: 9″ Hand Forged T10 steel Clay Tempered Steel Blade Thank you for your comments friend
@TheMillionsCEO Жыл бұрын
where can I buy this katana ?
@boonsfrc3 жыл бұрын
I'm getting one
@VeganJutsu
3 жыл бұрын
Yes fam! Let me know what you think
@achongehsuccess-bs8qx Жыл бұрын
Im an African and I totally Love Katanas and would love to have one some day. I had a vision and this is the message I got. The "katana tatsi urinbitsu" I don't know if that's even a real word but I will love to find out.
@kingof-bunz6506 Жыл бұрын
Wait do you carry these swords out in public?
@highlander2002684 жыл бұрын
you dont have to take that tape off, just cut in the middle aruond it and it pills right off, chinese swords do all the same wrapping
@VeganJutsu
4 жыл бұрын
Great tip sensei thank you
@paulthecabs89293 жыл бұрын
Fun fact: all the comments in this video are hearted
@slashdewan
3 жыл бұрын
loved
@airpower7692 Жыл бұрын
Best to find the seam and cut down it to open easier for the next time
@VeganJutsu
Жыл бұрын
Box: 1 Me: 0
@airpower7692
Жыл бұрын
@@VeganJutsu I love katanas. Great video keep up the good work
@VeganJutsu
Жыл бұрын
@@airpower7692 thank you friend! The new 2022 version T10 is on the way! Cheers
@jujitusuka2 жыл бұрын
Can I ask what your experience/school is in using a katana/wakiszashi Japanese bladed sword.
@VeganJutsu
2 жыл бұрын
Yes I have traditional Okinawa background both open hand and multiple weapons. Taught by my late sensei Shi Han Morris Mack as well as additional Shodan Ranks in other styles and dojo. Also my father is a Traditional Gung Fu practioner from Hong Kong but there was no schools in my city to learn so he taught me alot from young ages until Japanese Karate Dojo opened up they enrolled me at 3 years old, I left at 16 was a big mistake I thought I was to old to train. But I continue and taught later in University. And now I just train for fun
@jujitusuka
2 жыл бұрын
@@VeganJutsu : ok cool just asking as there are *a lot* of videos on YT showing people hacking at water bottles etc that don’t seem to have any kind of stance or anything and just seem to swing wildly at them. Just a suggestion, maybe update your info to reflect your experience.
@petermiller18393 жыл бұрын
I just want to know will it cut .
@petermiller1839
3 жыл бұрын
How many chapters do you need. Put a watermelon down and let's see some chopping.
@VeganJutsu
3 жыл бұрын
@@petermiller1839 I like your style. This was my first video and it's not very good. The Chinese war sword and others I chop through 4 watermelons and two pumpkins
@traversniemi53422 жыл бұрын
That is a acid etch differential temper Mark most likely.
@VeganJutsu
2 жыл бұрын
I'll know for sure when I take ot to the wet stones. With some minor polishing the temper hasn't faded
@traversniemi5342
2 жыл бұрын
@@VeganJutsu I will hit you back up I'm interested to see what happens when you do your polishing. Thank you for the reply
@Leman.Russ.6thLegion3 жыл бұрын
I think the foam is good packaging.
@VeganJutsu
3 жыл бұрын
Its good I just made a big mess 😅
@Leman.Russ.6thLegion
3 жыл бұрын
@@VeganJutsu LMFAO XD You still like the Waki?
@VeganJutsu
3 жыл бұрын
@@Leman.Russ.6thLegion I broke the handle after 1 week and mounted the blade to an axe handle. After that I really enjoy this blade.
@Leman.Russ.6thLegion
3 жыл бұрын
@@VeganJutsu OH XD that's cool. I thought you meant you ATTACHED it like an axe, to a handle, and I got a kick out of that.
@VeganJutsu
3 жыл бұрын
@@Leman.Russ.6thLegion oh Jeez like a sythe? How's your splits training going I gave you a follow friend
@akaali973 жыл бұрын
Noice. 👌
@VeganJutsu
3 жыл бұрын
It's an instant classic . thank you for your comments friend
@joeyzbf23 жыл бұрын
Awesome video and you are right. Today’s situation with riots, looters, protesting mobs this better for close combat defense than a full katana. Thanks for sharing for I will get and train on it. Does that sword break down like the full katana? Full tang? Removing the two pins and thump release?
@VeganJutsu
3 жыл бұрын
Yes it does! I have a video where I rehaft the T10 blade to an axe handle. Train with honour shinobi
@johnsmith-zd5he
3 жыл бұрын
i love swords also. But remember...dont bring a knife to a gun fight. stay home instead lolol
@VeganJutsu
3 жыл бұрын
@@johnsmith-zd5he If you see My videos I have many many guns. Peace and blessings shinobi
@TWShadow
2 жыл бұрын
What kind of psychopath wants to bring a sword to a protest? Stay home.
@jackarrows14363 жыл бұрын
🗡️😉out of stock
@VeganJutsu
2 жыл бұрын
We bought them all!
@jackarrows1436
2 жыл бұрын
@@VeganJutsu THX for info
@daltonmarchand27552 жыл бұрын
UK you could of cut olong the opening of the stiraphome
@VeganJutsu
2 жыл бұрын
Yes that's true. But I didn't want the tape residue on my blade
@nycfootage70473 жыл бұрын
it says unavailable on amazon
@VeganJutsu
3 жыл бұрын
Wow we bought them out of stock! If you message me on Instagram I can help you find a decent sword in this price range.
@nycfootage7047
3 жыл бұрын
@@VeganJutsu lol ok! What’s ur IG?
@VeganJutsu
3 жыл бұрын
@@nycfootage7047 vegan jutsu
@UnknownK4ge3 жыл бұрын
I’ve been trying to find a good katana that is pretty cheap I think this is the one can it cut a coconut will it start to get wobbly after you cut hard stuff please reply and subscribe if you can🙏🏼
@VeganJutsu
3 жыл бұрын
Howdy friend. Yes there is a video called "is the yongli strongly" i cut and baton seasoned hard woods and cut through 8 water bottles easily. It will smash a coconut the last coconuts I was able to break open with a pocket folding knife. That video is called "basic edc jutsu strikes" This sword is very nice but the handle did crack. I replaced the handle with an Axe handle in the video called "ko katana build" i will sunscribe to you friend. Many blessings.
@UnknownK4ge
3 жыл бұрын
@@VeganJutsu thank you for the info and the sub very appreciative 🙏🏼
@Psycho-Ssnake Жыл бұрын
I can't believe you unwrapped all that tape like that! 🤣 Because your thumbnail to this video says vegan I was waiting to hear if it was real ray skin or not.
@VeganJutsu
Жыл бұрын
Yes it was my first review video lol It is not real ray skin. I address this in my ongoing videos and the reason I choose certain swords over others
@mattnobrega6621 Жыл бұрын
Can you remove the pins in the handle and check the tang?
@VeganJutsu
Жыл бұрын
Yes. The tang is full but it's a one pin design and it's weleded at the pommel. I did a rehandle to an axe handle and love it. There is a video of the build. It's still going strong
@mattnobrega6621
Жыл бұрын
@@VeganJutsu That's awsome. Welp worst case scenario, you can swap out the weak components and either make or replace them with better quality ones.
@notsauucey80693 жыл бұрын
A
@VeganJutsu
3 жыл бұрын
B
@karenjohnsen8180
3 жыл бұрын
@@VeganJutsu C
@JesusChrist_IsTruth-LoveForALL
Жыл бұрын
@@karenjohnsen8180 D
@tomhughes51233 жыл бұрын
why not cut the top ? and what did you do with the knife didnt it cut the tape ? you need a new knife pal. its very sharp it cut through the air a good few times, the same company does cold steel 1060 carbon blades .. this turkeys gonna hurt himself badly ! heres a fact pal the steel was crap back in the katana days AND there wasnt much of it , they were usually only hardened along the cutting edge , and 1000s of years ago equates to 1100 ad were in 2000 ad , that cheap half copy is probably better made than 20 original katanas thats a fact
@VeganJutsu
3 жыл бұрын
Yup I'm pretty sure I said that T10 is superior to any katana they had in samurai period. I was trying to avoid cutting the tape because its hard to clean from the blade. This sword is still going strong its very well made for only $100. Thank you for your comment friend
@tomhughes5123
3 жыл бұрын
@@VeganJutsu good value for 100 dabs .
@Ratselmeister3 жыл бұрын
Show watch please.
@VeganJutsu
3 жыл бұрын
Its just a Gshock Metal Case
@ryuprimeus37192 жыл бұрын
I wouldn't consider it a cheap sword I would considered it a reasonable priced sword especially for those people who do not want to spend chunks of money on a over Priced sword.
@VeganJutsu
Жыл бұрын
Exactly I'm glad the quality and price was able to transfer across the screen. I'm happy with how it's performed for the cost.
@olternaut2 жыл бұрын
How can a sword smell bad? What did it smell like exactly?
@VeganJutsu
2 жыл бұрын
It had a strong fumes that burnt the nose kinda like burning plastic or chemicals.
@JR-ld1et3 жыл бұрын
Lmao the restless souls .lol it's smells very bad LMAO
@ronniepaulinc3 жыл бұрын
is that authentic notty pine? lulz
@VeganJutsu
3 жыл бұрын
The way that it split I would say so 😄
@christopher54878 ай бұрын
What's the length?
@VeganJutsu
8 ай бұрын
I believe it's 22 inch blade
@vittoriob5873 Жыл бұрын
There is no cutting test. On the film, the blade looks blunt and jagged.
@riaandewinnaar50402 жыл бұрын
Does it cut?
@VeganJutsu
2 жыл бұрын
Yes almost all my cutting video is performed with this blade
@lancedyck5398 Жыл бұрын
Is 9260 better than T10?
@VeganJutsu
Жыл бұрын
Hey sorry I don't have any 9260 to compare. I will consider this steel on my next sword purchase. My favorite steel is 80crv2 and 3v, I'd say T10 is harder than 1095 and similar in strength to 5160. Of course a good heat treat is essential so I shop by forge/maker not just steel
@jgutmen4862 жыл бұрын
I usually open my packages with a sling blade..,or machete..
@VeganJutsu
2 жыл бұрын
Good choice
@BasedKashmiri06 Жыл бұрын
This is all a man needs
@user-fz5wn4jy4i3 жыл бұрын
Thats a Kodashi......No?
@VeganJutsu
3 жыл бұрын
From my understanding no based on the blade orientation being blade up. But if you carried it blade down then yes.
@user-fz5wn4jy4i
3 жыл бұрын
@@VeganJutsu isnt it because of the length? coz i showed my teacher he said this is a kodashi.....
@VeganJutsu
3 жыл бұрын
@@user-fz5wn4jy4i No a wakizashi can be the same length as a kodashi. However the kodashi is older in time with the tachi which is worn blade down.
@DJLaiblaus20232 жыл бұрын
ຢ່າງໄດ້ຂບໍ$100-200😍ຂໍເບີແດ່
@junjampingnolimit53772 жыл бұрын
Wakizashi the best boss 🇺🇸🇬🇧🇺🇸🇬🇧
@VeganJutsu
Жыл бұрын
💯💯
@l.47233 жыл бұрын
Heh my comment won't get pinned
@l.4723
3 жыл бұрын
What the hell I guess that one guy wasn't lying
@VeganJutsu
3 жыл бұрын
@@l.4723 sorry I don't understand. Blessings friend 🙏
@matteugenecastromayor15562 жыл бұрын
i wonder if that's a real kisaki
@VeganJutsu
2 жыл бұрын
In most functions it doesn't matter. Good question
@Perkeletricksterservantofrher2 жыл бұрын
thats 1045.
@petermiller18393 жыл бұрын
Stop talking and start cutting. All show no action
@VeganJutsu
3 жыл бұрын
Check out part 2, 3, and 4
@petermiller1839
3 жыл бұрын
@@VeganJutsu Does 2,3 and 4 just have more talking why not do it in one.
@VeganJutsu
3 жыл бұрын
@@petermiller1839 if you want something really exciting check out my Secret power Of ki videos where I read a book for 4 hours 😅
@JG-vw8vq2 жыл бұрын
That was the wrong knife to open that box up
@VeganJutsu
2 жыл бұрын
No it was just un experience with that type of packaging. It wasn't a box it was just layers of tape over foam. Super messy and smelled awful
@thinhhuu34372 жыл бұрын
3:50 Do Not mess with blade. It may hurt you body.
@VeganJutsu
Жыл бұрын
My body is ready.
@avalonjustin Жыл бұрын
Shortsword.
@davidisthis Жыл бұрын
Well maybe better than 1000 years ago but t10 isn't superior to traditional Japanese steel. T10 is only superior in being stainless. T10 is between 1095 and 440c but less chromium than 440c.
@VeganJutsu
Жыл бұрын
I just bought the updated 2022 version. The one from this video has great edge retention and very little damage even after all these years of chaos. Agreed tho that in modern days it's nothing special but for $100 it's very hard to compete in this value.
@michalcerven5501 Жыл бұрын
rest of spirits😅
@user-ct6xz9cz3t Жыл бұрын
a b c d
@chillin3636 ай бұрын
Not a full tang. Very disappointed.
@VeganJutsu
6 ай бұрын
I have a video where I take apart and rehandle. the tang goes all the way through to the end. Perhaps the design is changed
@chillin363
6 ай бұрын
sales person said all (real) Katanas have a 2 cm distance from end of blade to butt of handle to prevent rust. I did not see your video with the take apart. @@VeganJutsu
@VeganJutsu
6 ай бұрын
@Hope_Prayer about 2 minutes into this video kzread.info/dash/bejne/ZGGNzs5wp9GfkrQ.htmlsi=xiTwV5I_zrdx_TvR
Пікірлер: 193
I really like your energy, I stumbled upon this video last week and referenced it again tonight, I shall be looking through your channel. I expect more great content, keep up the good work
@VeganJutsu
3 жыл бұрын
Thanks for your kind words friend
Good review and that thing looks nice. Been looking for a decent budget wakizashi and I think I'm gonna go with this one. Thanks for posting this and sharing the info!
@VeganJutsu
2 жыл бұрын
Thanks for the comment friend 💜⚡️
I have also gotten myself a cheap but decent T10 tanto. Not bad at all. Guess T10 steel is the key
@VeganJutsu
3 жыл бұрын
Yes good steel usually translates to a good blade. I'm very happy with this cheaper blade. Blessings
Great looking Wakizashi, man. I got myself a T10 tool steel katana for only $157. You are exactly right and I also mention this in my video - most modern steels are WAY superior to the traditional medieval tamahagane steel. Too bad katana cultists can't get this through their head.
@cody3362
2 жыл бұрын
Where did you get said katana
@Svet69
2 жыл бұрын
@@cody3362 hi, I have linked a few katana's in my video's description. Check them out, they are all under $155.
@cody3362
2 жыл бұрын
@@Svet69 thank you so much
@VeganJutsu
2 жыл бұрын
Thank you for the comment I will check out your videos!
@bogdantomic9453
Жыл бұрын
Well made tamahagane katana could put 10 cm hole in steel helmet without rolling chipping or scratching. You have documentary about that. Btw traditional katana have good balans and geometry since they are forged and not grinded. I don't see how tamahagane(high carbon) blade with superior geometry is worse than some trash modern blade with bad balance and fittings that are made from crap and not right size.
Cool, good ideas on use just what I was looking for!
Great video and awesome techniques using the sword
@VeganJutsu
3 жыл бұрын
That's very kind thank you friend
@samson5791
3 жыл бұрын
Vegan Jutsu look like a true Samurai with those moves. You got me practicing now. Take care 👍
Yep its clay tempered , but i doubt very much its t10 for $100 i can see you hurting yourself with that , you cant tell its tool steel unless you you get it rockwell tested , t10 is reserved for expensive blades , if it scratches during messing with it its carbon steel , tool steel doesnt scratch up
@VeganJutsu
3 жыл бұрын
We can't really trust anything unless we forget it our selves. In another video I baton through hard wood and it holds up well. Cheers
I really like your vibe and how you think, I have no blades anymore but wish to get back into it. I prefer shorter blades like this that in my opinion are better suited for high agility, fast paced movement. Thank you for the video!
Great review!!!
@VeganJutsu
3 жыл бұрын
Thank you Master
Nice Video👍 Might get myself one.
Subscribed before watching cuz vegan. Nice, informative and helpful video tho :)
@VeganJutsu
3 жыл бұрын
I appriciate that fam!! Much love
No cut test?
@VeganJutsu
2 жыл бұрын
I've beat this blade to Valhala and back. Check out my videos! Still haven't sharpened it and still sharp blade. When it no longer cuts I will sharpen to 30,000 grit virtuvice style
Good video dude. Never heard of them before. Will be interesting to see how she holds up. Lots of those amazon blades have issues with either being too hard or too soft. Hopefully this one is a good one...
@VeganJutsu
4 жыл бұрын
Hi thanks a lot, I made an update video after one week of use. The blade is holding up well but there has been some issues. Train well
@erichusayn
4 жыл бұрын
@@VeganJutsu welcome
That cold steel kris needs a good sharpening, it should cut that packaging tape with one motion.
aye at the end of the day even of it isnt t10 it looks awsome
This is the very first video I’ve watched from you when you still had 400 subscribers and I’ve been subbed ever since, and I do not regret that decision hahaha
@VeganJutsu
3 жыл бұрын
Yo that's awesome I appreciate you 💜⚡
beautiful! nice slash too! wish you got the measurements though, but thanks for sharing!
@VeganJutsu
2 жыл бұрын
Thank you! It was my first video
Read the reviews and look at the review photos. The tsuka is glued on, looks like it’s not exactly full tang. I hope you never want to disassemble. :)
@VeganJutsu
3 жыл бұрын
Yeah if you look at my updates I actually rehandled the T10 blade to an axe handle. And it's awesome!! 😍😍
@AgouraSteve
3 жыл бұрын
@@VeganJutsu oh. That’s interesting. Cool.
So u think T10 is better than the best samurai swords of old?
@VeganJutsu
2 жыл бұрын
In many cases yes but not all
Can you cut with it like is it real or fake blade
@VeganJutsu
3 жыл бұрын
Yes it cuts I have alot of cutting videos with it in my youtube shorts.
One sword? Laughs in Musashi
@VeganJutsu
3 жыл бұрын
They kind of multiplied since I made this video 😅📈📈
What kind of Wakizashi was the other one. Great video
Good video
@VeganJutsu
3 жыл бұрын
Thanks shinobi fam ☺
Make sure no one comes walking in the room. In Sha allah
Hello young fella is that from Shi Jian?…
@VeganJutsu
2 жыл бұрын
I'm not sure but it's possible
Has this held up? I'm so tempted. I want a Waki so bad lately, but I don't want to pay a respectable price because I don't know if I'll like it. The colors look exactly like what I would want. The price is right.
@VeganJutsu
Жыл бұрын
The blade is great and still holding up. I did have to re handle after only one month of use but the T10 blade is still running smooth
Where can I buy the really good katana?
@VeganJutsu
2 жыл бұрын
Its from kult of Athena
I love it
Looking at the handle wrap materials on these swords and wondering if it's possible to get a company to test out a handle wrap like on the CRKT Obake line of knives. Those knives use a kind of imitation rayskin wrap, but they're epoxied in place and more solid than a real leather wrap. If that concept works on a sword wrap it'd not only be vegan friendly but possibly stronger than traditional materials, almost never needing to be re-tightened. This would also challenge the fear that sword companies have to make "high end" stuff with non-traditional materials and not make it look like something out of a zombie movie If swords were still serious battle weapons, they'd def be made with the kind of synthetic materials used on high end sports equipment like tennis rackets, given that natural leather is vulnerable to moisture and temperature changes.
I bought a katana with carbon steel and it costed me around $350 something I think it's also tempered
@VeganJutsu
Жыл бұрын
Sounds awesome! I just ordered a new T10 katana for $150
@nolife097
Жыл бұрын
@@VeganJutsu Jesus you’re still hearting and replying now that’s dedication. Also I have a T10 katana it’s pretty good also mate how do you recommend sharpening a katana since my old whetstone is gone is there like another way or do I have to buy another whetstone
@VeganJutsu
Жыл бұрын
@@nolife097 you don't have to buy new stones, although it requires a bit more finesse. The bottom of ceramic mugs are about 1000 grit. I usually use a ceramic mug to touch up blades. But with a longer blade length it's not ideal. You could try and find ceramic plant pottery with a wider more flat base and use this as your abrasive stone. There's is alot of other ways including using wet sanding paper secured to a flat base and working through more finer grits.
@nolife097
Жыл бұрын
@@VeganJutsu got it thank you
Nice
Your knife is a keris, in indonesia.🇮🇩 Nice knife, nice katana.
@VeganJutsu
3 жыл бұрын
Thanks I love that keris knife alot!
I just may give them a try for one of those. 😎💰⚔️💰😎
What is the overall size of Wakizashi
That's what she said.....now ....I do like the length of it... LMAO ...I do like the width of it 🤣🤣🤣🤣🤣
total length of the entire new wakazashi pls?
@VeganJutsu
3 жыл бұрын
I cannot measure as I've fitted an axe handle to this blade. The manufacturers specs read as follows: Overall Length: 30″, Blade Length: 20 1/2″, Handle Length: 9″ Hand Forged T10 steel Clay Tempered Steel Blade Thank you for your comments friend
where can I buy this katana ?
I'm getting one
@VeganJutsu
3 жыл бұрын
Yes fam! Let me know what you think
Im an African and I totally Love Katanas and would love to have one some day. I had a vision and this is the message I got. The "katana tatsi urinbitsu" I don't know if that's even a real word but I will love to find out.
Wait do you carry these swords out in public?
you dont have to take that tape off, just cut in the middle aruond it and it pills right off, chinese swords do all the same wrapping
@VeganJutsu
4 жыл бұрын
Great tip sensei thank you
Fun fact: all the comments in this video are hearted
@slashdewan
3 жыл бұрын
loved
Best to find the seam and cut down it to open easier for the next time
@VeganJutsu
Жыл бұрын
Box: 1 Me: 0
@airpower7692
Жыл бұрын
@@VeganJutsu I love katanas. Great video keep up the good work
@VeganJutsu
Жыл бұрын
@@airpower7692 thank you friend! The new 2022 version T10 is on the way! Cheers
Can I ask what your experience/school is in using a katana/wakiszashi Japanese bladed sword.
@VeganJutsu
2 жыл бұрын
Yes I have traditional Okinawa background both open hand and multiple weapons. Taught by my late sensei Shi Han Morris Mack as well as additional Shodan Ranks in other styles and dojo. Also my father is a Traditional Gung Fu practioner from Hong Kong but there was no schools in my city to learn so he taught me alot from young ages until Japanese Karate Dojo opened up they enrolled me at 3 years old, I left at 16 was a big mistake I thought I was to old to train. But I continue and taught later in University. And now I just train for fun
@jujitusuka
2 жыл бұрын
@@VeganJutsu : ok cool just asking as there are *a lot* of videos on YT showing people hacking at water bottles etc that don’t seem to have any kind of stance or anything and just seem to swing wildly at them. Just a suggestion, maybe update your info to reflect your experience.
I just want to know will it cut .
@petermiller1839
3 жыл бұрын
How many chapters do you need. Put a watermelon down and let's see some chopping.
@VeganJutsu
3 жыл бұрын
@@petermiller1839 I like your style. This was my first video and it's not very good. The Chinese war sword and others I chop through 4 watermelons and two pumpkins
That is a acid etch differential temper Mark most likely.
@VeganJutsu
2 жыл бұрын
I'll know for sure when I take ot to the wet stones. With some minor polishing the temper hasn't faded
@traversniemi5342
2 жыл бұрын
@@VeganJutsu I will hit you back up I'm interested to see what happens when you do your polishing. Thank you for the reply
I think the foam is good packaging.
@VeganJutsu
3 жыл бұрын
Its good I just made a big mess 😅
@Leman.Russ.6thLegion
3 жыл бұрын
@@VeganJutsu LMFAO XD You still like the Waki?
@VeganJutsu
3 жыл бұрын
@@Leman.Russ.6thLegion I broke the handle after 1 week and mounted the blade to an axe handle. After that I really enjoy this blade.
@Leman.Russ.6thLegion
3 жыл бұрын
@@VeganJutsu OH XD that's cool. I thought you meant you ATTACHED it like an axe, to a handle, and I got a kick out of that.
@VeganJutsu
3 жыл бұрын
@@Leman.Russ.6thLegion oh Jeez like a sythe? How's your splits training going I gave you a follow friend
Noice. 👌
@VeganJutsu
3 жыл бұрын
It's an instant classic . thank you for your comments friend
Awesome video and you are right. Today’s situation with riots, looters, protesting mobs this better for close combat defense than a full katana. Thanks for sharing for I will get and train on it. Does that sword break down like the full katana? Full tang? Removing the two pins and thump release?
@VeganJutsu
3 жыл бұрын
Yes it does! I have a video where I rehaft the T10 blade to an axe handle. Train with honour shinobi
@johnsmith-zd5he
3 жыл бұрын
i love swords also. But remember...dont bring a knife to a gun fight. stay home instead lolol
@VeganJutsu
3 жыл бұрын
@@johnsmith-zd5he If you see My videos I have many many guns. Peace and blessings shinobi
@TWShadow
2 жыл бұрын
What kind of psychopath wants to bring a sword to a protest? Stay home.
🗡️😉out of stock
@VeganJutsu
2 жыл бұрын
We bought them all!
@jackarrows1436
2 жыл бұрын
@@VeganJutsu THX for info
UK you could of cut olong the opening of the stiraphome
@VeganJutsu
2 жыл бұрын
Yes that's true. But I didn't want the tape residue on my blade
it says unavailable on amazon
@VeganJutsu
3 жыл бұрын
Wow we bought them out of stock! If you message me on Instagram I can help you find a decent sword in this price range.
@nycfootage7047
3 жыл бұрын
@@VeganJutsu lol ok! What’s ur IG?
@VeganJutsu
3 жыл бұрын
@@nycfootage7047 vegan jutsu
I’ve been trying to find a good katana that is pretty cheap I think this is the one can it cut a coconut will it start to get wobbly after you cut hard stuff please reply and subscribe if you can🙏🏼
@VeganJutsu
3 жыл бұрын
Howdy friend. Yes there is a video called "is the yongli strongly" i cut and baton seasoned hard woods and cut through 8 water bottles easily. It will smash a coconut the last coconuts I was able to break open with a pocket folding knife. That video is called "basic edc jutsu strikes" This sword is very nice but the handle did crack. I replaced the handle with an Axe handle in the video called "ko katana build" i will sunscribe to you friend. Many blessings.
@UnknownK4ge
3 жыл бұрын
@@VeganJutsu thank you for the info and the sub very appreciative 🙏🏼
I can't believe you unwrapped all that tape like that! 🤣 Because your thumbnail to this video says vegan I was waiting to hear if it was real ray skin or not.
@VeganJutsu
Жыл бұрын
Yes it was my first review video lol It is not real ray skin. I address this in my ongoing videos and the reason I choose certain swords over others
Can you remove the pins in the handle and check the tang?
@VeganJutsu
Жыл бұрын
Yes. The tang is full but it's a one pin design and it's weleded at the pommel. I did a rehandle to an axe handle and love it. There is a video of the build. It's still going strong
@mattnobrega6621
Жыл бұрын
@@VeganJutsu That's awsome. Welp worst case scenario, you can swap out the weak components and either make or replace them with better quality ones.
A
@VeganJutsu
3 жыл бұрын
B
@karenjohnsen8180
3 жыл бұрын
@@VeganJutsu C
@JesusChrist_IsTruth-LoveForALL
Жыл бұрын
@@karenjohnsen8180 D
why not cut the top ? and what did you do with the knife didnt it cut the tape ? you need a new knife pal. its very sharp it cut through the air a good few times, the same company does cold steel 1060 carbon blades .. this turkeys gonna hurt himself badly ! heres a fact pal the steel was crap back in the katana days AND there wasnt much of it , they were usually only hardened along the cutting edge , and 1000s of years ago equates to 1100 ad were in 2000 ad , that cheap half copy is probably better made than 20 original katanas thats a fact
@VeganJutsu
3 жыл бұрын
Yup I'm pretty sure I said that T10 is superior to any katana they had in samurai period. I was trying to avoid cutting the tape because its hard to clean from the blade. This sword is still going strong its very well made for only $100. Thank you for your comment friend
@tomhughes5123
3 жыл бұрын
@@VeganJutsu good value for 100 dabs .
Show watch please.
@VeganJutsu
3 жыл бұрын
Its just a Gshock Metal Case
I wouldn't consider it a cheap sword I would considered it a reasonable priced sword especially for those people who do not want to spend chunks of money on a over Priced sword.
@VeganJutsu
Жыл бұрын
Exactly I'm glad the quality and price was able to transfer across the screen. I'm happy with how it's performed for the cost.
How can a sword smell bad? What did it smell like exactly?
@VeganJutsu
2 жыл бұрын
It had a strong fumes that burnt the nose kinda like burning plastic or chemicals.
Lmao the restless souls .lol it's smells very bad LMAO
is that authentic notty pine? lulz
@VeganJutsu
3 жыл бұрын
The way that it split I would say so 😄
What's the length?
@VeganJutsu
8 ай бұрын
I believe it's 22 inch blade
There is no cutting test. On the film, the blade looks blunt and jagged.
Does it cut?
@VeganJutsu
2 жыл бұрын
Yes almost all my cutting video is performed with this blade
Is 9260 better than T10?
@VeganJutsu
Жыл бұрын
Hey sorry I don't have any 9260 to compare. I will consider this steel on my next sword purchase. My favorite steel is 80crv2 and 3v, I'd say T10 is harder than 1095 and similar in strength to 5160. Of course a good heat treat is essential so I shop by forge/maker not just steel
I usually open my packages with a sling blade..,or machete..
@VeganJutsu
2 жыл бұрын
Good choice
This is all a man needs
Thats a Kodashi......No?
@VeganJutsu
3 жыл бұрын
From my understanding no based on the blade orientation being blade up. But if you carried it blade down then yes.
@user-fz5wn4jy4i
3 жыл бұрын
@@VeganJutsu isnt it because of the length? coz i showed my teacher he said this is a kodashi.....
@VeganJutsu
3 жыл бұрын
@@user-fz5wn4jy4i No a wakizashi can be the same length as a kodashi. However the kodashi is older in time with the tachi which is worn blade down.
ຢ່າງໄດ້ຂບໍ$100-200😍ຂໍເບີແດ່
Wakizashi the best boss 🇺🇸🇬🇧🇺🇸🇬🇧
@VeganJutsu
Жыл бұрын
💯💯
Heh my comment won't get pinned
@l.4723
3 жыл бұрын
What the hell I guess that one guy wasn't lying
@VeganJutsu
3 жыл бұрын
@@l.4723 sorry I don't understand. Blessings friend 🙏
i wonder if that's a real kisaki
@VeganJutsu
2 жыл бұрын
In most functions it doesn't matter. Good question
thats 1045.
Stop talking and start cutting. All show no action
@VeganJutsu
3 жыл бұрын
Check out part 2, 3, and 4
@petermiller1839
3 жыл бұрын
@@VeganJutsu Does 2,3 and 4 just have more talking why not do it in one.
@VeganJutsu
3 жыл бұрын
@@petermiller1839 if you want something really exciting check out my Secret power Of ki videos where I read a book for 4 hours 😅
That was the wrong knife to open that box up
@VeganJutsu
2 жыл бұрын
No it was just un experience with that type of packaging. It wasn't a box it was just layers of tape over foam. Super messy and smelled awful
3:50 Do Not mess with blade. It may hurt you body.
@VeganJutsu
Жыл бұрын
My body is ready.
Shortsword.
Well maybe better than 1000 years ago but t10 isn't superior to traditional Japanese steel. T10 is only superior in being stainless. T10 is between 1095 and 440c but less chromium than 440c.
@VeganJutsu
Жыл бұрын
I just bought the updated 2022 version. The one from this video has great edge retention and very little damage even after all these years of chaos. Agreed tho that in modern days it's nothing special but for $100 it's very hard to compete in this value.
rest of spirits😅
a b c d
Not a full tang. Very disappointed.
@VeganJutsu
6 ай бұрын
I have a video where I take apart and rehandle. the tang goes all the way through to the end. Perhaps the design is changed
@chillin363
6 ай бұрын
sales person said all (real) Katanas have a 2 cm distance from end of blade to butt of handle to prevent rust. I did not see your video with the take apart. @@VeganJutsu
@VeganJutsu
6 ай бұрын
@Hope_Prayer about 2 minutes into this video kzread.info/dash/bejne/ZGGNzs5wp9GfkrQ.htmlsi=xiTwV5I_zrdx_TvR