EXCELLENT VIDEOS VERY EASY TO FOLLOW AND UNDERSTAND

@TomsTinkeringandAdventures

11 ай бұрын

Thank you. I try to show as much as I can without making four hour long videos.

Same procedure for a Hisun 700, thank- you for verification I did it right. Kudos.

@TomsTinkeringandAdventures

4 жыл бұрын

Dennis Vestby is that one of the clone models? I have heard that they are good copies, haven’t worked on one yet.

@dennisvestby4432

4 жыл бұрын

@@TomsTinkeringandAdventures Yes a 700 Same as Yamaha Rhino I think Yamaha copied it from the chinese I seen them in asia in the 70's.

@dennisvestby4432

3 жыл бұрын

@@TomsTinkeringandAdventures Yes it is samw as Yamaha Rhino, Tom .

Very helpful videos. I did find a better way to torque the upside down head bolt by the exhaust (bolt 5). On my 2006 Rhino I could get it by lying under the UTV and using a really long extension and a hole that was in the skid plate. You can get the 11mm 12pt socket on it no problem and use the torqe wrench normally...

@TomsTinkeringandAdventures

Жыл бұрын

That’s awesome, thanks. Sometimes you just have to look at it from a different perspective.

Great series, thanks for the tips! I looked through all of your videos; any kind of an update on how things are holding up? I'm getting ready to pull the head on a machine with a bent valve. I don't plan on replacing the cylinder, but I may use the studs for reassembly. Thanks!

@TomsTinkeringandAdventures

2 жыл бұрын

I was just talking with a buddy about this. The Rhino is still running great. The cheap Niche piston and cylinder are holding up fine. I have my stock cylinder here as a possible backup, it would need to be bored out to use it. I think the stud kit has helped immensely. Best of luck, thanks for watching.

Those little advance mechanisms are time consuming. Good vid.

@TomsTinkeringandAdventures

5 жыл бұрын

darren cycles yeah, they sure can be a pain.

I have the Grizzly 660, same engine, and I'm on the exact same path. It was smoking like a chimney when I bought it. Installed the Niche 100mm cylinder/piston kit, rode it for about 30 miles, and now it's blowing the coolant out. I even used new head bolts and torqued in the proper sequence. Did the head studs, higher torque values and quality gasket correct the issue for the long term? Thanks!

@TomsTinkeringandAdventures

4 жыл бұрын

W W unfortunately we haven’t taken the Rhino out much. I have read a lot of issues with the Niche cylinders. I’m betting that mine fails again, at which point I will get a Yamaha cylinder. Good luck, hopefully I am wrong!

I have to adjust the valves on my 700 hinshu is it the same adjustment as the rhino? Mine is 2010

@TomsTinkeringandAdventures

2 жыл бұрын

From what I have heard, they are really similar.

@brianspinney6477

2 жыл бұрын

Thank you for the information

What year is your yamaha rhino 660?

@TomsTinkeringandAdventures

Жыл бұрын

It’s a 2006 if I remember correctly. Nothing really changed on the 660’s.