Yamaha Raptor 660 - head service - backfire effect - part 1
Жүктеу.....
Пікірлер: 14
@anayal8tr1302 жыл бұрын
Why does a motor cough out the Intank ? Can it also be a valve ? I was thinking or maybe spring is to week and valve ain’t closing fast enough?
@heltongoncalves59962 жыл бұрын
Great work! Where can I buy the piston rings for raptor 660?
@p-enduropotoki2966
2 жыл бұрын
look 4 ProX rings set imageup.me/rw
@heltongoncalves5996
2 жыл бұрын
@@p-enduropotoki2966, you have helped me a lot, but I will use your knowledge again if you permit. Still with Raptor 660r (2007, but in Brazil). I have a engine, but I am not sure if it is 2001 or 2002+ (US). I must buy a wrist kit (wrist, bearing and crank pin) They are very similar, but not equal. Wrist and bearing are fitble with all years, but crank pin isnt. There are specific codes. 2001 (3YF-11681-00-00) Weight 1.1875 lb = 538g 2002+ (5KM-11681-00-00) Weight 1.125 lb = 510g The only difference that I have noticed is the Weight, but this is not a good parameter. Do you know how can I be sure if the crank pin is a 2001 or 2002+? Why they are not compatible one another? Thanks!!!
@p-enduropotoki2966
2 жыл бұрын
@@heltongoncalves5996 maybe in these search engines you will find the answer yama-sklep.pl/oryginalne-czesci-zamienne/1841/yamaha-660r-raptor-yfm660rnyfm660rnc-2001
@chrisalberts504 Жыл бұрын
Was your raptor backfiring through the carbs on a cold start?
@cristiantorres6038
Жыл бұрын
My does that have you found a solution I’ve tried cleaning the carbs thing it was dumping fuel when trying to start
@chrisalberts504
Жыл бұрын
@Cristian Torres I find my problem my piston skirt was busted and caused piston slap and had to rebuild I threw a big bore kit on and jetted it with genuine mikuni jets and it's starts right up
@bunglingbiker39772 жыл бұрын
So the leaking valve caused backfire?
@p-enduropotoki2966
2 жыл бұрын
Yes. Leaking valves.
@ChristianHelser9992 жыл бұрын
Is there another way to confirm this with motor in?
@p-enduropotoki2966
2 жыл бұрын
Yes - but you need a special tool to do leaking test
Пікірлер: 14
Why does a motor cough out the Intank ? Can it also be a valve ? I was thinking or maybe spring is to week and valve ain’t closing fast enough?
Great work! Where can I buy the piston rings for raptor 660?
@p-enduropotoki2966
2 жыл бұрын
look 4 ProX rings set imageup.me/rw
@heltongoncalves5996
2 жыл бұрын
@@p-enduropotoki2966, you have helped me a lot, but I will use your knowledge again if you permit. Still with Raptor 660r (2007, but in Brazil). I have a engine, but I am not sure if it is 2001 or 2002+ (US). I must buy a wrist kit (wrist, bearing and crank pin) They are very similar, but not equal. Wrist and bearing are fitble with all years, but crank pin isnt. There are specific codes. 2001 (3YF-11681-00-00) Weight 1.1875 lb = 538g 2002+ (5KM-11681-00-00) Weight 1.125 lb = 510g The only difference that I have noticed is the Weight, but this is not a good parameter. Do you know how can I be sure if the crank pin is a 2001 or 2002+? Why they are not compatible one another? Thanks!!!
@p-enduropotoki2966
2 жыл бұрын
@@heltongoncalves5996 maybe in these search engines you will find the answer yama-sklep.pl/oryginalne-czesci-zamienne/1841/yamaha-660r-raptor-yfm660rnyfm660rnc-2001
Was your raptor backfiring through the carbs on a cold start?
@cristiantorres6038
Жыл бұрын
My does that have you found a solution I’ve tried cleaning the carbs thing it was dumping fuel when trying to start
@chrisalberts504
Жыл бұрын
@Cristian Torres I find my problem my piston skirt was busted and caused piston slap and had to rebuild I threw a big bore kit on and jetted it with genuine mikuni jets and it's starts right up
So the leaking valve caused backfire?
@p-enduropotoki2966
2 жыл бұрын
Yes. Leaking valves.
Is there another way to confirm this with motor in?
@p-enduropotoki2966
2 жыл бұрын
Yes - but you need a special tool to do leaking test
@myrtproject2324
2 жыл бұрын
@@p-enduropotoki2966 like what
@Jursaw
Жыл бұрын
@@myrtproject2324 leak down tester probably