Six years after publishing, this video is still helping owners out. Thank you, sir, much appreciated!

Awesome video! Very thorough steps and tips along the way. I bought my block off plates months ago but haven't installed them yet, so this will definitely motivate me...I'm sure it will really help with the job. Thanks a million for this guide!

Ritchie you have vastly improved my mt10 ownership experience! Keep it coming

@Richies Bikes - I just want to say thank you for this step by step guide. I used it 100% to install block off plates on my 2018 MT. Much appreciated!

Hi ! I just got an MT10 and i love your videos man! I hope that you're doing fine, thank you very much for taking the time and doing these great tutorials!

AIS removal and spark plug change was a success with the help of your video. Many Thank You's

followed this to a tee and was spot on... excellent guide 👍🏻👍🏻

I removed AIS from mine and installed Graves block off plates last Saturday. Thank you so much for your help.

@hawthorne7712

5 жыл бұрын

Did your Graves come with the plug in for the ais pump? Mine didnt

@TheMetal750

3 жыл бұрын

What do the block off plates do?

Taking the tank off and this was a big help, thanks.

Solid video brother! Nice to see a video of the actual work being done! Very helpful! Cheers Mate.... oh yeah nice bike too

Excellent video richie great presentation very professional

Wozza sent me here :D, just picked up my MT-10, fantastic bike...subbed.

@RichieIsf

7 жыл бұрын

Ahh Wozza, Yeah seems like a great bloke , enjoy mate.!!

Great guide! Thanks for the good visual and explanation.

@RichieIsf

7 жыл бұрын

Hi Mathieu, Thanks for the support.!

You explain things VERY WELL! Thank you!

Just opened mine up for the first time today thanks to this video!

Hi, love the video--very clearly presented how to remove fuel tank, air manifold box, etc. Am planning to buy a new MT 10 within a year--would like to see a video on how to change the spark plugs if you feel inclined to make one. Thanks for this though--very helpful.

Great vid, so nice to see someone go to the trouble of filming and explaining. Will certainty give confidence to lots of owners to do more of their own work.

Great video. Could not be any clearer how to do this. Thanks alot

How long did this take you? What tools exactly do you recommend? Awesome tutorial. You're probably the only one with a step by step on this!!! Thanks!!!

just installed my graves block off plates using this video. thank u very much! great great video.

@hawthorne7712

5 жыл бұрын

Did your Graves come with the plug for the ais pump? Mine didnt

Thanks for the post brother! Very thorough!

Thanks a lot mate, I can service my 2016 MT10 by myself now, this is brilliant.

Muy bien expicado todo el trabajo, excelente vídeo !!

This is extremely helpful! Thank you

Thanks man. I have been using this series as a guide for my new MT10. Big Help.

@RichieIsf

5 жыл бұрын

Sean, thanks mate .👍 I’ve been a bit lazy the past 12 months , have since had a baby and she takes most my time . I do have a few vids up my sleeve, however if there was anything you would like, feel free to let me know .

@seancarroll8326

4 жыл бұрын

@@RichieIsf Just seeing your year old reply now as I am re watching this video to refresh myself. I am finally installing the resistor to take away the check engine light. My kit didn't include it, I guess I was supposed to leave the AIS dangling inside but I thought my ECU flash would stop that code. Congrats on the baby! I just had one in October, so I know how wrenching on the bike has taken a backseat to raising a little one. I still plan on using some of the other videos you've posted to guide me through some other mods I'm considering. Looking forward to the new videos. Maybe you'll inspire me to do more mods. You definitely had me do a couple myself with your vids, without them, I would have just sent it to the shop and paid a mechanic. So, you saved me money and helped me learn. Great experience. Thanks. Quick question, I ECU flashed my bike, but as I roll on the throttle, there are some serious abrupt steps in power, will a power commander and dyno smooth that out?

@RichieIsf

4 жыл бұрын

@sean , I’d take it back to your tuner and get him to smooth the throttle out . Congrats on your baby bud , hope mum and bub are safe and well . I’ve just welcomed a baby boy to my tribe . But am going to get back to these Vids real soon .

@seancarroll8326

3 жыл бұрын

@@RichieIsf Just seeing this now. Happy to hear about your baby boy. I finally installed the resistor for my AIS removal and I used your video as a guide again. It was critically helpful, and as you predicted, that one little clip had me cursing and taking the lords name in vain. But I got it done. I wish you were doing more of these, videos, but I have three boys now, so I get it. You've made some great content that I fully appreciate. Hope your family is doing well. Thanks again brother! Be safe!

Thanks for taking the time to make this. Very helpful sir 👍☺️

Thx for your vidz. I was installing a new air filter and used your vid to see how to remove gas tank. Got to say, those bottom 2 tabs you said we're a pain actually was a snap...no pun intended...went from the bottom. I even used your vid installing the Yamaha heated grips. I'll be recommending your video in my post on the FZ-10 FB page I'm on, and all my other FB groups.

@RichieIsf

5 жыл бұрын

Cheers Dean for your feedback , if you have any other suggestions for Videos I could make , please let me know . I believe I'm apart of that group you mentioned.

@deanlonskey2479

5 жыл бұрын

@@RichieIsf Haha...I was thinking you might be but wanted to put a shout out your way. About the only suggestion I'd have is trying to get just a little more light into those dark areas, however, it looks like some vidz you're on your own. Props to you for taking the time. GOOD JOB!

Thanks Richie. One small tip another video made to address the hole left in the bottom of the air scoop. Was to cut off the grey plastic "nipple" that held the AIS system in place and use it as a plug. Just a small point Otherwise awesome video!

@RichieIsf

6 жыл бұрын

BAD yamaha MT10 , thanks for your feedback mate . I found the small hole didn’t affect anything as it was pre filter air. 👍

Thanks mate, such a pain to remove the tank and covers to change the air filter, I might give it to the garage lol

Thank you very much Richie. HUGE help!

Just installed mine and a BMC filter today thanks to your video

@RichieIsf

6 жыл бұрын

pat, thanks for stopping by and for leaving your comments . Did u do the air box mod?

@a1cdoddy

6 жыл бұрын

I did not, I don't want to risk it not running well. I just got the bike saturday lol.

Just did this on my 2021 MT10. Very easy video to follow along to. Thanks

@kevincraig8257

2 жыл бұрын

no fuel shut off valve ? thanks

@kevincraig8257

2 жыл бұрын

Did it eliminate decel pop ? thanks

@Atheism1991

2 жыл бұрын

@@kevincraig8257 yeah it got rid of the pops. sounds good

@Atheism1991

2 жыл бұрын

@@kevincraig8257 correct flash tune the fuel cut. throttle is so much smoother at low rpms and slower speeds

Nice clear instructions, thanks for sharing Richie :)))

@RichieIsf

5 жыл бұрын

David Hughes, Cheers for your feedback mate . Be sure to hit that subscribe button for future content coming very soon

Great video..thank you. One note, on my 2017 FZ10 both of the rubber hoses under the tank are vent lines and both go down the side of the bike. No difference. Odd huh.

I like! Keep it up!

Great video thanks for making it very helpful

Thanks for this video, definitely helped me! Much appreciated

Richie, I'm looking at replacing my spark plugs. Once the air box is removed, is there anything else needing removal? Finding vidz on this hasn't been great. Thx

great video. any idea how to clear engine light? thx. how do u like your mt 10. I really like mine. thx!!

Useful thanks mate !! It's called an Intake Air Pressure sensor or IAP, or Map sensor...

@ticoruizsuarez

3 ай бұрын

No it's not

@conservative-proud

3 ай бұрын

@@ticoruizsuarezok, it’s otherwise known as a PAIR valve… what Suzuki call it…

Interesting video learned a few things

Thank you. I'm trying to do the same. What if tank is not empty and you try to remove the fuel pump hose? Will it not leak the gas/petrol?

Thanks super helpful! Great step by step!

Great work Mate, Cheers 👍

How do you take those side fairings completly off? So they don´t hang there?

Very helpful. Thank you!

Hi Rich, what difference if any did removing the AIS make and what about the Airbox inlet restricter/snorkel did it make a noticeable difference, or just more inlet noise ?

Hi, offtopic question, how do you like those mirrors? And can you post a link of where you bkught them from. Thanks and great video.

Great video thanks , Did you have the logo on the plates on the front wheel side or throttle body side or didn't it matter 👍🏼

Very intuitive video Question: The air scoop/snorkel You never removed it with fitting the K&N My one has been removed, but no real explanation to why What are your thought?

Hey Rich, question about the plug for the pump delete. My Graves plates didn't come with one, and with my exhaust servo delete I put a servo tricker plug in but it had a computer board off of it to tell the computer how far the valve is open according to throttle position. This is just a pump that runs one speed. So is the plug in just sending power back down to the computer to say it's on? No computer tricker module on it, so in theory could you just complete the power circuit by touching the pins together inside the female end of the plug? Does that makes sense what I'm asking? Instead of ordering the plug from smartmoto for $20 plus shipping I could just use a jumper? Thanks

This is great. Really finding your videos helpful! Have you had your ecu flashed and/or dynotuned? Looking to fit an akro system soon so not entirely sure what exact steps i need to take after installing. Thanks!

@RichieIsf

6 жыл бұрын

Robert Stubbs, Check out my Videos for walk thru for fitting these... I haven’t had the chance to have a tune yet , however my bike appears to be running like a clock....apart from a small flat spot around 3200-3500rpm, but when it clears its throat it’s amazing! 👍

thanks for the guide !

Thank you so much , best tutorial ❤️ ❤

Now I know how to change my air cleaner, Thanks Richie I love your car is that a R

Thanks for the video. I bet the valve clearance check is a PITA on this thing.

Are the left and right air vents useless?

The garage mechanic loves this

Hey mate you better release some of that zip tie pressure from the clutch leaver side wiring loom (coming from left handle-bar switch-block) .. It Just looks far too tight, I'm just saying!!

great video

excellent video thank you

Video was very helpful

THX so much. I was looking for info on spark plug change and it looks like the AIS has to come off anyway. Consider it gone!

@RichieIsf

4 жыл бұрын

FZ10Rider, thanks for your kind words , I’m am looking to do a plug change on mine..., and of course the camera will be rolling..

Thanks, Richie. Hardest part for me was getting the fuel and air hose back on the tank when reassembling. Hard to get my sausage fingers under there.

Big help just fitted an MWR airfilter to mine thanks to you. Remap tomorrow 😎

Someone posted your vids on fz10.org . Great job Sir! Stop by our forum and say hello sometime!

This is really helpful, thanks for making! Couple of questions: why didn't you remove the airbox snorkel, and did you remove the charcoal canister? thanks!

@RichieIsf

7 жыл бұрын

Hi Sanford, thanks for your kind comments. I did consider removing the airbag snorkel, however i saw no point or benefit in doing so , and nope charcoal canister is still in fitted and connected.

@RichieIsf

7 жыл бұрын

bit of a update ... I've removed the airbox snorkel..... even without a tune the difference is very noticeable. i will light touch on that in my next update.!

@ikilforkut

5 жыл бұрын

in what video did you put the light touch cant find it :D

Your videos are quite detailed and very helpful for me. Installed Decat pipes using your video as reference, Thanks. Quick question on this video. I am trying to install Graves AIS block off plates for mine. in this video at 15.30, where did you get that AIS wiring harness from ? Appreciate your response.

@RichieIsf

5 жыл бұрын

Thanks for your positive comments Hari . The wiring harness you ask about is supplied in the kit from Smart Moto. However, its said you can switch it all off when u flash the ECU with the Woolwich tune software.

@HariNedunghat

5 жыл бұрын

Thanks @@RichieIsf. I am planning to go for ECU flash after installing AIS block off plates. My FZ10 is running way too rich IMO after decat because I smell lot of gas compared to stock. Do you think AIS block off plates will help for time being other than stopping back fires?

Love the vids man! Just got my MT-10! Love it!

@porkchopspapi5757

3 жыл бұрын

Congratulations. If you don't mind how tall are you? Do you look too big for the bike? Many performance bikes are just too small for a 6' guy to be riding.

@KeithPatterson369D

3 жыл бұрын

@@porkchopspapi5757 6'2" 220! Fits perfectly! Best fitting sportbike ever! I also had an FZ-09! It was too small!

@porkchopspapi5757

3 жыл бұрын

@@KeithPatterson369D Really, good to know. I ask because the Suzuki xs1000? looks tiny. Have you seen one?

@KeithPatterson369D

3 жыл бұрын

@@porkchopspapi5757Yes I have seen the Suzuki! It's smaller then the MT-10! MT-10 is a comfortable bike to ride! Seat is hard but bars and pegs are about perfect! On my FZ-09 I put lower bars trying to make more cockpit room! Still too small! MT-10 fits nice!

@porkchopspapi5757

3 жыл бұрын

@@KeithPatterson369D It is between mt10 & zx1400. Thanks for your time & help.

hey mate, sweet guide! what bar end mirrors are they? hows the visibility?

@wilkiecourt807

4 жыл бұрын

cheddle looks like arrow. I have the same and are a complete game changer. You can actually see behind you

Hey Richies, enjoying your videos very much... Wondering if you could do an installation run down and review of those mirrors you have on the bar ends? What brand, etc. Are they stable/no vibration? As with most people I can't see a darn thing without shifting my shoulders with the factory mirrors and have been considering the extended brackets for the stock ones but then noticed your mirrors. They are sick looking and may just be what I'm looking for. Can you help a fellow rider and FZ10 owner out? Thanks!

@RichieIsf

5 жыл бұрын

Nbit69, Im on to it.

@RichieIsf

5 жыл бұрын

kzread.info/dash/bejne/gqGjt8upm6m3fbQ.html

Great video mate thx

If y’all are having issues pulling the tubes out of the tank, just pull them up with the tank. I found that much easier. Just make sure to take them off afterwards or position the tank and tubes where it won’t leak gas.

@RichieIsf

4 жыл бұрын

Yeh, true , however if you happen to lift the tan k to high you run the risk of breaking the connector off the fuel pump. and the other hoses being completely dislodged from where they are meant to be.

hello my dear, thanks for the video, but a simple question... what the AIS doing in the bike?

@robertpowers1045

4 жыл бұрын

They put it on a lot of bikes...had a Yamaha 450 enduro dirt bike. My understanding is it limits air/throttle control to match the restrictive exhaust they put on bikes today...it really makes a difference in acceleration when it’s gone, mine built revs faster

@AdryDoic

3 жыл бұрын

in therms of power nothing!! with throttle close it gets air in the exhaust system to get burnt all combustion gas that was in excess with last acceleration! yes these pops and bang many people love to hear! blocking AIS you will have a Pop free ride !

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

Sprint filter is better. And no heard you should take out that rubber scoop too. Your bike will get way better air flow.

So, what performance difference did the changes make ? p.s. I have a MT10 SP with a link pipe which I think sounds good but probably makes NO difference to the performance ....!?

@RichieIsf

5 жыл бұрын

Wayne Pratt , thanks for your feedback. No “real performance “ upgrade as such. However a quick google search of the forums would suggest when u do flash tune the bike it’s much easier for your tuner to get the mixtures right, which does yield HP , also it eliminates the banging and popping on decel, which is rumored to over time cause damage to the exhaust valves. .

also, can you tell me where I can get an MT sticker like you have on your tank?

@RichieIsf

7 жыл бұрын

it was on the bike when i purchased it ...?

Very helpful!

If you reflash the ECU to disable the AIS (always closed), then there is no need for block offs, right?

@ticoruizsuarez

3 ай бұрын

No, you still need to block it off

Excellent video, is it worth removing the airbox snorkel at the same time?

@RichieIsf

4 жыл бұрын

Scott , Thanks for your feedback. 100% , remove that rubber snorkel. More induction noise will follow !

@scottaird6762

4 жыл бұрын

@@RichieIsf does it just pull out? Or do I need to remove the whole airbox?

HI RICHIES SORRY FOR MY QUESTION FOR WHICH REASON IT 'S GOOD TO REMOVE THE AIS ? IT'S GOOD?

@qoe75

7 жыл бұрын

what gains are there from removing the AIS?

@exuptoy

5 жыл бұрын

The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream if you were trying to dyno the bike for instance. By removing the air injection system you can achieve an accurate A/F ratio. It will also reduce or stop the popping and from the exhaust on the overrun. Although some people like this!

could you please tell me which bar end mirrors you have? they suit the bike so well.

@RichieIsf

7 жыл бұрын

Tim , Thanks for your comments mate, the mirrors are off Ebay mate. Just cheapies for now till i can get some nice Rizomas. Just type in Retro Bar end mirrors and you have plenty to pick from . www.ebay.com.au/itm/OVAL-HANDLE-BAR-END-UNIVERSAL-REAR-VIEW-SIDE-MIRROR-7-8-INCH-MOTORCYCLE-ALLOY-/192211275226?hash=item2cc0af4dda:g:3yMAAOSw~y9ZDANp

@timaxton8586

7 жыл бұрын

Richies Bikes thank you very much for that.

Nice job fella, but you don't wanna be levering out the AIS blanking plug like that! The black bar across the top of the plug is a resistor to fool the system into thinking that it is still connected! Resistors are ceramic devices which will snap in half and you will bring up the MIL light if it got damaged. Otherwise, a nice instruction video.

Sound guide thankyou

Richie, how have you been? Any new work done to your mt?

@RichieIsf

4 жыл бұрын

Crown, thank bud 👍 . Family and work life hav taken front and center for me since making my last video . But it’s time to make some more vids.!

can you please explain why you have removed the AIS and have a different MT 10 after the rim damage? now black wheels with a different registration plate

@RichieIsf

7 жыл бұрын

Thanks for your question... The rim damage/AIS bike is mine , the black bike belongs to a mate who wanted to fit a Link pipe... the fitment is the same no matter the colour of the bike .. 👍

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

So the relevant question: how much performance increase does this significant operation produce?

@ticoruizsuarez

3 ай бұрын

A lot, makes it easy for computer reading on the air fuel ratio

Can anyone please explain what the block off plates axtually do?

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

I’m don’t know so much of this but can someone tell me WHY he remove the AIS ? What for ?

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

Is there no way to remove the stock airbox without first removing those dozen screws and opening the airbox up?

@RichieIsf

7 жыл бұрын

Justin R. , thanks for your comments mate 👍, sadly no you will need to remove the dozen screws to remove the lid of the air box as the bottom of the box is held to the engine at your throttle bodies by 6 Allen bolts either side of the intake trumpets.

@mprziv

7 жыл бұрын

Gotcha. That's what it looked like in the video, appreciate the response!

What’s the benefit/ Reason for removing the AIS?

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

so why have you removed the AIS?

@RichieIsf

7 жыл бұрын

When you install the Decat pipe , the bike will bang and pop on decal , the AIS allows air into the exhaust and causes the engine to run lean , causing the banging and popping, which if left will cause damage to the Exhaust valves, Plus if tuning the bike (woolich ) you can turn the AIS off. The weight of the standard Cat is amazing , easily 4-5 kgs, not to mention how much easier your bike will accelerate .

Are the side snorkels on the MT10 functional or just for looks?

@wilkiecourt807

4 жыл бұрын

really fast!! Looks

@sam.merritt

5 ай бұрын

Both. Many people will tell you that they are blocked off. But they are only partially blocked off. Yamaha knows better than we do howw to design a rabbit system for street use.

What is that AIS system ? im about to get mt10 , and i want to know if thats necessary

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

Is there no way just to plug off those AIS lines from down below somewhere. That's a ton of work.😅

awesome

Just curious, why did you get rid of the AIS system?

@ticoruizsuarez

3 ай бұрын

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback

put some silicon in the air box hole that goes to the AIS . let the AIS in place and save a couple of buck ... cheap way to do it

Richie, is that M140i in the back?

@RichieIsf

4 жыл бұрын

Haha , well spotted . Michal , it’s my stage 2+ M135i . Absolute beast of a car these things !

@michalmydlo

4 жыл бұрын

@@RichieIsf I did same choices MT10 + M140i 😃 however I already sold BMW...

Is it safe to block or remove AIS?

@ticoruizsuarez

3 ай бұрын

Yes