Hey James I wouldn't recommend running this truck on 3s lipo without some cooling measures put in place first as the motor will over heat and you will end up with a smoke show. When I done this lipo mod over a year ago I chose to tap into and solder the existing lithium ion wiring loom as I wanted to be able to use the stock battery also as well as the deans plugs lipos which I covered in my recent xinlehong line up and discussion video. Cutting a big chunk of the plastic cage is necessary to be able to access the switch or just leave it powered on. I hate how they designed it that way also on most of these branded trucks. Thankfully the 9130 and 9125 have external power switches. Happy Rc-ing brother

@themountain59

5 жыл бұрын

I run it on 9.6V 2000maH Nihm pack since I have it with no issues at all

@PERTHWESTOZRC

5 жыл бұрын

@@themountain59 It runs on 9.6v out the box so there would be no issues, I'm referring to 11.1v 3s

@themountain59

5 жыл бұрын

@@PERTHWESTOZRC well...and I have to revise my comment...first warmer day today here...burned my motor :/...well , brushless here I come :D

@jamesroebuck5911

4 жыл бұрын

I know a couple of folk have also placed heatsinks on the ECS transistors on the board (four of them) this will avoid smoking the circuit board when you run the 11.1👍 Great vid btw!!

@jamesroebuck5911

4 жыл бұрын

PERTH WEST OZ RC do you have any experience using dry graphite to grease the diff vs normal grease?

Great educational video. I learned a lot. Thanks.

My s912 is completely stock. What do you think I should do to make it faster that don’t cost that much either.

bro, can xinlehong 9125 rc add a hex adapter or not? if possible, what size is the hex adapter?

How long did the battery last on one single charge?

I just re-subbed because I wasn't getting any notification's..I won the S912 today! lol..Going to do the oil filled shocks and tires first thing

@LeSiZmOr

5 жыл бұрын

Nice!

@philthyco1

5 жыл бұрын

@@LeSiZmOr It broke after a few small jumps lol..Check the vid

@jamesroebuck5911

4 жыл бұрын

PhilthyCo RC, love it! Will you leave the wheels stock, or... what size wheels will you run?

@philthyco1

4 жыл бұрын

@@jamesroebuck5911 I ran Tamiya buggy wheels and super gripper tires..Much better

@jamesroebuck5911

4 жыл бұрын

PhilthyCo RC cheers mate- I’ll take a look

Hi, I ordered the fan cooling system for my s911 and I want to upgrade the battery where I'm having problems what to pick. Some say 2s others 3s and I even found someone that say it will run fine with 4s. Personally want to go with 11.1V 3S 2200mAh 25C . Any help will be really appreciated Thanks (first rc car for me)

@jamesroebuck5911

4 жыл бұрын

I can’t find any cooling heatsink/fan combos which lost the internal dia of the heatsink (27mm) to fit around the motor☹️ What did you get, fit OK?

How many millimeters is the tire?

Actually that 9.6v 800mah stock battery will only be 750mah. Take the wrapper off and you will see 750mah written on each battery inside. The batteries work good at 9.6v but the run time is rubbish so you need at least 6 batteries for a good hour pf fun.

In my 9115 after connecting lipo 3s burned recevier.. Model purchased in Poland (europe)

Hey RC hobbyists ! I did this mod too,...all seemed good. I took it for a run outside and only got 2 minutes and the red LED that normally turns solid ON keeps,...keeps blinking as soon as I give "gas" or want to steer. When I don't press or turn anything on the remote,...the LED becomes solid again and when i dare touch something on the remote it reacts for a millisecond turning ON, OFF, ON, OFF etc. The battery is fully charged. I even went as far as to connect the S912 Truggy directly to an AC to DC voltage controller capable of 20 Amps. Same thing !, 1 or 2 minutes tops I get before the red LED blinks when it gets a signal from the remote. Anyone figured out a fix for it ??????

@nix.c7918

6 ай бұрын

Hey, did you ever find a solution to the problem? I’ve got the same issue and I’m not sure how to fix it. Thanks

Hi.Can I know how much V and mAh battery wear?

@LeSiZmOr

5 жыл бұрын

stock battery is 7.4V 1600mah

Great video I have this truck. I love that fact that it is cheap and you can upgrade it..the ESC can handle the added power etc. Here is the REAL PROBLEM....plastic gears. You do all those mods and with regular runs, especially at higher speeds the plastic gears are gone...FAST. Do you have a metal gear solution? if you can show that or figure out how to make the diff. last then you will have it figured out!...but as is..the plastic crap rear diff. makes all this modifying virtually pointless....let me know! Thank you..

@statiic.

5 жыл бұрын

YES! I need this too!

@rcnoob6231

5 жыл бұрын

11.1v will burn out esc

I wish there was a way to send ya a pic of my s911

@LeSiZmOr

5 жыл бұрын

Check my email address in the comments. I will see if I can help.

I was thinking the same....

Ice bash! Drift any RC u own

Will a 3s burn up the motor?

@LeSiZmOr

5 жыл бұрын

3s may cause premature wear to stock bits.

@jamesroebuck5911

4 жыл бұрын

Cooler on motor and heatsink on ESC should keep you moving for at least a while!

You don't need to apologize for the weather anyone who is smart enough well realize we are in the end of days

@Anonymous-zs6vs

3 жыл бұрын

Correct and coronavirus is just 5G microwaving us by the government so we can get vaccines in the vaccines will be the mark of the beast and then when Judgment Day comes after you took the vaccine....wellll....

t-plug

Good info. Had to give it a thumbs down based on the universal KZread scoring standard, which grades by how many times you say "gonna go ahead and" or "went ahead and".