How to Paint a Scale Model 1/24 car with airbrush in 10 steps !
Автокөліктер мен көлік құралдары
Hello modellers.
In this video I show you how I paint my model cars in 10 steps.
Material I use:
- Vallejo Model Color Light Grey
- Vallejo Surface Primer Grey
- Tamiaya masking tape
- AK interactive Deep Red Intense Modelling Colors
- Vallejo Model Color Black
- Vallejo Model Air Aluminium
- ZAP Zap-a-Gap Medium CA+
- Tamiya Extra-Thin Cement
- vallejo premium-color metallic black-60ml
- Revell Contacta Professional
- Vallejo FlexiSander Dual Grit
- Vallejo Surface Primer Black
- Motip red
- Motip glossy
- AMMO Ultra Glue for Photo-Etch and Clear Parts
- Meguiar's Ultimate Polish
- Tamiya Spray-Work Painting
- AK interactive deep violet intense modelling color
- vallejo model color glossy black 17m
- AK interactive xtreme metal chrome 30ml
- tamiya clear red x-27
- tamiya clear yellow x-24
- tamiya clear orange x-26
- AK-800 sanpaper
- Mig Copper 0199
- vallejo model color stone grey-17ml
- vallejo model color olive grey-17ml
- Tamiya mark fit
- vallejo surface primer white-200m
- Metal Acrylic color Mig-196
- AMMO MIG 0192
- game air vallejo sun yellow 72706
- Ammo mig-0194
- Ammo Mig-0045
- Mr. Color GX Super Clear III UV Cut Gloss 18ml GX-112
- Vallejo Plastic Putty
- Mr.Hobby SF-284 Mr Surfacer 1000
- A.Mig 0191 Steel.
- MR hobby flat zwart.
- Red - 17ml - A.MIG-0049
- MR.hobby 46 green.
- MR.Hobby 11 white.
- Createx 4053 UVLS High Gloss Clear
- Createx Reducer 4011 30ml.
- vallejo 70940 model color-saddle brown
- AK-interactive fluorescent orange-acrylic
- Mr.Hobby H002 02 Black (Gloss)
- Createx W031 Wicked-Detail Jet Black
- Createx Classic 5109 Brite Green.
- Tamiya x22
- MR Hobby 25
Thinner & cleans brands I use:
- Gunze Mr. Color Leveling Thinner 400
- Vallejo Model Air Thinner
- Createx Reducer 4011 Thinner 60ml
- Mr.HobbyT-116 Mr.Tool Cleaner (400ml)
Tools:
- Airbrush Harder & Steenbeck Colani www.harder-airbrush.eu/en/col...
- Belkits SB002 Portable Spray Booth with LED www.dominomodel.com/nl/p/1093...
- Tamiya spray work www.amazon.com/Tamiya-74522-S...
- Spray Booth www.amazon.com/Master-Airbrus...
Пікірлер: 79
When build model kit feel happines and enjoy for step by step work it... Thanks for sharing, greeting from Indonesia 🇮🇩
Thank you for your time and sharing your work.
@pmb2442
Ай бұрын
Don't mention it👍
Nice tutorial there, filled with information and definitely helpful. Thanks for the share.
@pmb2442
9 ай бұрын
You welcome
First time watching your videos,nice work,like the scale,thanks for sharing, El boricua shop
Nice tutorial. Thanks for sharing.
@pmb2442
9 ай бұрын
Don't mention it!
Nice video para principiantes
Wow Great video keep them coming
@pmb2442
4 ай бұрын
We'll do it, thanks!
I’m working on the same kit right now! ‘85 Camaro! But I wish it came with IROC decals for the nostalgia.
Nice....love it ❤😊
@pmb2442
3 ай бұрын
THX 👍🏻
nice one 👍👍
@pmb2442
9 ай бұрын
Thanks 👍
just about to resume my 1/24s i left off years ago. never really properly top coat my works before. this video makes a good tutorial : )))
@pmb2442
4 ай бұрын
Good to hear thanks!
Nice to see someone else using a Colani! Best kept secret in airbrushes. Nice work!
@BananaSquare
8 ай бұрын
Yes. Very few know about it's ease of use. What size nozzle do u use for model cars? 0.6 mm?
@kennethpickett718
8 ай бұрын
@@BananaSquare Hey, I have been using .6 for under coats and clears with really good results. Spraying Createx 4053 HG clear I can get results equal to 2K
@BananaSquare
8 ай бұрын
@kennethpickett718 thanks for sharing
wow superb nice job can i use vallejo poliuretane varnish replacement for laquer
@pmb2442
5 ай бұрын
Super thanks! You'll have to try it out, but I think it will work.
Nice tutorial, fantastic result. Can I ask please, I've had several disasters previously due to inexperience having mixed 2 different products, noticed you used Tamiya lacquer with Mr Color thinner? I always stick with like for like 👍. Again fantastic finish on your project 👌
@nismojukerich2994
4 ай бұрын
Yes Mr color leveling thinner works great with a wide assortment of different paints.
@smackbottom53
3 ай бұрын
I believe that even though the video says “spray lacquer “ what he uses is Tamiya x22, which is an acrylic clear coat and not lacquer. Please correct me if I am mistaken.
nice tutorial. Thank you. Which paint-filter do you use?👍
@barbatosrex9473
9 ай бұрын
Looked like a standard one you get at the auto supply or house paint store
Have you wet sanded the clear coat? It looks pretty nice as it is. Do you polish?
@pmb2442
9 ай бұрын
sanded the ground layer wet as you show in the video and did not polish
I just found your channel today 9/1/23. In looking at your list of items used i see some listed that are not shown. Are there other videos showing the rest of the building of this car? Also what is the car you are building?
@pmb2442
9 ай бұрын
hi welcome to my channel. you can find the video under the heading videos and playlist.
@mikeellis5347
9 ай бұрын
@@pmb2442 thanks
What about sanding with 1000 grit if you have it? I found some on Amazon that I ordered a while back that was 1000 grit.
@pmb2442
9 ай бұрын
for me 3000 works but if you want 1000 use no problem.
👍👍
would you happen to know if you can use automotive polish over Vallejo paints, with or without a clear top coat?
@pmb2442
2 ай бұрын
with topcoad. otherwise you brush off again
😮I need that body holding thingy
@pmb2442
4 ай бұрын
kzread.info/dash/bejne/an6CzcuslNmuhNI.htmlsi=_9sE5P_jS352nVvW
I have a Colani too. What was the nozzle size u use for this build?
@pmb2442
8 ай бұрын
Nozzel size 0.8 but I don't open the arm completely. is about half way, so you can compare it 0.4 / 0.5
I see you can buy a specific Aqueous thinner. What's the difference between that and the self levelling thinner?
@pmb2442
3 ай бұрын
The difference is in the drying time. This thinner ensures that your paint does not dry out quickly. so that your paint can flow better. And you can use Tamiya paint & Mr hobby
@pmb2442
3 ай бұрын
The difference is in the drying time. This thinner ensures that your paint does not dry out quickly. so that your paint can flow better. And you can use Tamiya paint & Mr hobby
@Nixxtrr
3 ай бұрын
@@pmb2442 Thank you!
What PSI do you use on airbrush for paint and clear?
@pmb2442
9 ай бұрын
That's a bit different what kind of needle you use. usually 1.5 / 2.0 bar
What do you think about the harbor freight airbrush
@pmb2442
8 ай бұрын
That's what I started with and it's nothing Mies, but what I use now is a very nice airbrush. easy to clean and good feeling with airbrush.
How did you paint the black part on the headlight area?
@pmb2442
3 ай бұрын
I just did it with a brush. 😉
That sky blue its a candy color?
@pmb2442
2 ай бұрын
No Mr hobby 25
Step 11 - polish clear coat?
@pmb2442
9 ай бұрын
No polish coat.
Your result with Tamiya clear coat X-22 is amazing. I don't manage to obtain that amazing glossy finish. What are your secrets please ?
@pmb2442
2 ай бұрын
This could have various causes. You will have to try that yourself with some tests. That's how I taught myself.
Just thinking what with all these gadgets, it's a wonder someone hasn't come up with a mini paint mixer like the one in the paint store. Load it up and stand back while it shakes it.
@buildzmodz3871
6 ай бұрын
They probably have them there just expensive
@independentmind1977
4 ай бұрын
They have :) it’s just expensive and not worth it
@wadep420ify
3 ай бұрын
Badger makes one. 55 bucks I think
painting didnt work for me the plastic started to melt
@barbatosrex9473
9 ай бұрын
Melted the plastic? What brand of paint did you use? What kit did you spray? Could you give me a few details so I can help you out
@pmb2442
9 ай бұрын
what thinner and paint did you use?
@milwaukee13th
5 ай бұрын
@barbatosrex9473 do you weight the thinner and paint out in grams? Or what
@franceskeith4934
5 ай бұрын
dupli color lacker lacker thinner@@barbatosrex9473
@franceskeith4934
5 ай бұрын
by eye mom said it stinks to much so no more painting@@milwaukee13th
You mix 50/50 in weight, but it's not the same density, perhaps it's better to make it 50/50 volumes ?...
@pmb2442
9 ай бұрын
I don't think it really makes much difference. This works fine for me, I get a nice final result
@gutz323
9 ай бұрын
The percentage of volume when weighing paint vs a thinner will not be very much. A 50/50 mix is only a rough guide anyway. Many variables like the room temperature, and the nozzle size of the airbrush will effect the coverage more so than the actual mix of paint, even 5 or 10% either way would be OK in different conditions, although 10% too much paint to thinner ratio may slightly be too much for most average conditions.
thanky for the video, but the music is very irritating
Salut my friend super car super video subscribe sub
@pmb2442
4 ай бұрын
Super thank 👍🏻
would you happen to know if you can use automotive polish over Vallejo paints, with or without a clear top coat?
@pmb2442
6 ай бұрын
You need a clear top coat to do that. Vallejo paint is water based.
@johncater7861
6 ай бұрын
@@pmb2442 thank you.