this is literally the most helpful and basic videos I have ever seen on youtube thank you so much!

When you mentioned the blowing part, i tried and it just works perfectly fine tnx for the video lol

@user-fx9rh6gp9n

3 жыл бұрын

Same

@nathannoble4537

3 жыл бұрын

Same WTF😂🤯🤯 ive been avoiding playing with this controller just because of the bumper and now it works perfectly fine im pissed because i bought it back in October because the one i had was badly wrecked from raging and now it finally works lmao

@kleckscraft_1713

3 жыл бұрын

Same

@shxwdowdeaths4113

3 жыл бұрын

Same

@cerebrum099

3 жыл бұрын

@@nathannoble4537 how did it works ? Did you repair it or it just happens to suddenly working again for no reason ?

This was way better than any of the "high value" videos. Simple, good angles and lighting, and a much cheaper fix than a replacement bumper.

@tpkkr

Жыл бұрын

good angles=?? did we watch same video???

@channelname9468

Жыл бұрын

⁠@@tpkkr clearly you watched something else if you disagree

This method worked wonderfully. Even though the process of controller deconstruction was different for me, I still have to thank you for this guide.

The one thing i hate is that when one button dosent work and the others do it feels like you just wasted all the good buttons.

@wrqd35

3 жыл бұрын

smh

@captainko1589

3 жыл бұрын

Dude screw this. Shouldnt have to worry about the controller. But its xbox

@morganfreeman544

3 жыл бұрын

@@bonk4225 No they're not it's a grab for money 😭😭 they literally designed their own screws that don't have common screwdrivers so you can't DIY fix your controller. you deadass have to order a special screwdriver from Microsoft at extra cost if you even want a chance at fixing broken controllers. And my controllers go bad every 2-3 months. Different things every time. Controller drift is something most people live with, buttons stick/break/stop working, headphone jack just straight up breaks, etc. I have like 4 different unusable (for gaming) controllers because I can't fix them DIY. If they're so short term they shouldn't be like 60-90 dollars 💀💀

@morganfreeman544

2 жыл бұрын

@@bonk4225 Quite frustrating lol

@NoSpamForYou

2 жыл бұрын

@@bonk4225 They are bad. Bumpers go bad all the time. I have 3 with messed up USB ports. One the b button stopped working. The d-pad uses a plastic bubbled sticker for spring action and electrical contact and that starts making noise and has poor activation. I don't know why everyone doesn't use SEGA Saturn D-pad, the patent expired years ago.

I have to say I was skeptical as to whether this fix would work. I had the necessary tools from when I fixed a stick drift issue and so decided to give it a go on the RB button which wasn’t registering lighter taps, where LB would work with the same force. In my case, the plastic that contacts the button didn’t appear worn at all. I used a small piece of adhesive address label just to decrease the gap between plastic and button slightly and it has worked perfectly as a fix so far. The button still even has that satisfying click feel when pressed. Thanks for sharing this solution!

@mlgclxps8862

2 жыл бұрын

Can I do the same process but instead of decreasing the gap between the plastic and the button, you are increasing the gap between the plastic and the button?

@BobRoss-wm3lc

2 жыл бұрын

Still working for you?

@UberNiall

2 жыл бұрын

@@BobRoss-wm3lc it did work for quite a while but I don’t use that controller anymore. It developed an issue with stick drift and I discarded it entirely. A few times I had to open it up again and reapply some sticky label or whatever for the RB button issue. To be honest, it’s only ever going to be a temporary solution.

This works wonderfully even with a regular tape, saved me from the cost of repair or even the cost of getting a new controller. Thanks homie!

i should’ve watched this video before smashing my controller on my desk..

@Ariel-tr7oz

3 жыл бұрын

Lol

@god-kp8nf

3 жыл бұрын

Lol

@god-kp8nf

3 жыл бұрын

Lol

@takedown57

3 жыл бұрын

same

@stephencorral8527

3 жыл бұрын

Lol

Thank you so much! I just had to put 5-7 layers of thin tape on it, and it started working. It was my right bumper. The switch initially only registered when it was pressed on its sweet spot, but after I added the tape it works in every single part of the bumper!

definitely putting this in a playlist for later, right now the blowing method works, but f that stops then i’ll for sure use this method, as my controller is a bundle exclusive and i want to do everything to protect it

My dude! A lifesaver. It took a few attempts to get the tape in the perfect spot lol, but fixed the issue of a dodgy softpress.

I’ve been having problems with my lb button too and when you talked about the blowing method I was like I’m not taking apart my controller so I got nothing to lose and I did the blowing method and it freaking worked!!! Thx browski!!!

I got my 1st xbox one controller along with the console a few years ago when i was young ish when all of a sudden the RB button wasn't working and ive had it since but never used it and when u said to blow on it all of a sudden it was like brand new holy cow thank you for making this godly video truely u are a legend

Thanks for the video! It's nice to finally find a guide that suggests an actually permanent and cheap solution in comparison to the 10,000 "blow under the bumper bro, instant fix" videos

Thank YOU DUDE. The Tape took a few attempts before actually getting used to, but with the right positioning, the tape method works about 98% of the time!

Ur an absolute icon, the bit about the bumpers and the plastic pieces that press the keys was where you got me, absolute legend

You rock! This video needs more views! Your trick worked for me!!! I used painters tape instead of electrical tape though, easier to work with. Thanks so much!

@FuadPhenomenon

4 жыл бұрын

Gald it worked for you!

@bnnalol

3 жыл бұрын

Amphax A h is very gald for you!

@ConnorDukes

3 жыл бұрын

Wtf I actually just blue is like hard and now it working like new 🤣

@ConnorDukes

3 жыл бұрын

JustAYoungPR0 oh shit must have been in a hurry when typing my bad 🤣🤷🏻‍♂️

@bnnalol

3 жыл бұрын

JustAYoungPR0 r/justtofunnyforearthandsincethisisalreadyareallylongsubredditwhynotmakeitlongerbysayingallthisrandomcrap

Wow what an easy fix, blew into my RB button and it started working. Feel so stupid for not thinking of that LOL. Thanks!

First comment I have ever made on a video, bought a second hand controller online and was gutted when my RB didn't work, your blowing trick worked first time! Thank you so much!

2 years later and this is still applicale thank you so much bro

My issue was a little different so I'll leave it here: I was having a similar issue and upon opening it up I discovered that little spike that registers the bumper press was broken, so it would bend instead of registering a press. I removed it, and super glued it back on to fix my issue! Thanks for the guide on opening up the controller!

@Lifeofkei2xs

2 жыл бұрын

Same

@44mossman44

Жыл бұрын

Same

@lewsmart4075

Жыл бұрын

Mine was snapped on 1 side and can’t find the snapped part now🤣..

It worked, and i even made a custom clntroller out of it. And thank you sooooo mutch, legend Edit: it stopped working

@BlackedBeast

4 жыл бұрын

How did you do a custom?

@Xaenok

3 жыл бұрын

The black Plague he broke it You misssd the joke

@mccrispybacon

3 жыл бұрын

@@Xaenok it wasnt broken

@Xaenok

3 жыл бұрын

ScaryMøst you find a solution at least 😂

@BlackedBeast

3 жыл бұрын

Mr Beast thought he like replaced some parts with his own to design it to his likings

PHEW! Thank god, I blew into it and now it works again, just what I was looking for, thank you so much mate 👍😊😊

NO WAY, the "blowing method" actually worked... i'd never heard anyone else talk about it before. thanks so much!

Absolutely worked on my right bumper. Really did wonders. Thanks a lot

Thank you for saving me having to buy another controller. I broke one of the clips on the top-back of the left grip but that was my fault and a common occurance with anything clip based. Can barely tell its broken but I'd rather have that minor issue then have to buy a whole new controller. Thanks again, loved the screwdriver lmao

LOL, the blowing into the space between RB and RT actually worked, i did not know you could do this and i laughed pretty hard when it worked and i am glad i know now, thank you my guy.

This is a great example of an awesome tutorial. Bravo dude

THANKS SO MUCH, you just gained a sub and made my day! :)

Another tip that can help. Sometimes the switch the plastic presses on can sack down a little. Fold a strip of cardboard and use a size that barely fits in the gap so the cardboard pushes up the switch closer to the plastic that is supposed to press it.

Thank you!!! I got the tool set. It was 10 bucks. I have cracked open five 'dead' controllers and brought them all back to life except for one! One was your tape fix, two needed crazy glue for broken bumper posts that had cracked off, and one just needed a good cleaning, parts were sticking. The tool set is great!! And as a bonus, as I sat at a table with eviscerated controllers to and fro, my kid gave me my Christmas present. Two Overwatch thumbstick caps. Great timing. Thanks again and Happy New Year!!

That blowing technique at the beginning actually worked, wow cheers!

a big tip, If blowing doesnt work, try a can of compressed air, i was blowing, i was putting rubbing alcohol, everything, I was about to take it apart but decided to try canned air and it worked perfectly

@BigWheelThaGod

3 жыл бұрын

I tried compressed air and it didn't make a difference and then it just eventually got worse

@kungpaospic5318

3 жыл бұрын

@Myxtiqz He means computer duster, the compressed air with the thin plastic straw that you use to blow dust out of electronics like keyboards

@BigWheelThaGod

3 жыл бұрын

@Plat II no WD-40 is a liquid

@GoofyShjt

3 жыл бұрын

Canned air? Like that air in a bottle thing from the lorax movie?

I've got this issue right now and I've performed some pretty serious surgeries on my controllers in the past, so I'm not shy about opening the housing, but I should say that this problem can properly be fixed with electrical contact cleaner. The switch is only registering intermittently, and most often with deep presses, it's because there's dirt in the switch interrupting the connection. Get compressed electrical contact cleaner, or standard isopropyl alcohol should work in a pinch, and spray directly into the switch. Rapidly press the switch repeatedly for a minute or so. Allow to dry. No mod necessary.

@TafaraMolife

2 жыл бұрын

Can I use methylated spirit ?

@Durrutitv

2 жыл бұрын

@@TafaraMolife I believe it's mostly isopropyl alcohol, or at least smells indistinguishable from it, but it comes in a pressurized can that can spray it into hard to reach places, like into the thumbstick switch mechanism found inside controllers. And this should work in practically every instance of joystick drift as long as no physical damage had been done to the switch mechanism, patient care of your controllers and you're getting drift then this will almost always take care of it. You can try like dripping isopropyl alcohol into the mechanism you might have to do it repeatedly a few times actually get it in there and working and allow it more time to dry. If you go that route you'll want to use the highest purity you can find, the lower the purity the more water there will be in the water will linger much longer than the alcohol inside the switch which could cause electrical shorts which could damage the circuit board

@Inszz

2 жыл бұрын

Glad I found this so quickly in the comments. Just dumped some alchohol-ish cleaning solution over the switch a few times, blew inside it and did the rapid tapping. Fixed it. Thanks

@omsuwiperkasa

Жыл бұрын

yes, this i was looking for. something wrong with the switch. the thing is so hard to replace not as easy as ps4 switches

Mate I just blew into the controller and now it all of a sudden just works? I thought this was the stuff of legend where in elementary school Timmy repaired his 90’s game cartridges with a straw! I’ve entered a new level of evolution, my marksmanship of repair is outstanding! Oh and nice video, you earned a like.

Thank you, for the instructions. Took mine apart, medical taped it, working like a champ now. 👍🏻

Protect this man at all costs

Here's a small tip: If you don't want to permanently break a flat head screw driver, use a 5/64 bit. It works like a charm if you wedge it in there properly. EDIT: You can also break off that stupid little center post and use a regular torx bit.

glad to choose your video man, pro work

This is the first time I have watched a youtube video on how to fix something and it actually works

This is a possible solution to the problem however the issue (in this video) is actually a dirty switch. You prove it by showing that one of the switched only seem to work with deep pressing it even without the plastic part. If you spray some contact cleaner (or Isopropyl Alcohol) to the top of that switch and press it a bunch of times (to help it get inside the switch) then the issue could be fixed without the tape. I have just fixed mine yesterday :) Thanks for the video, it helped alot on how to diagnose the problem!

@swiftphoenix5660

2 жыл бұрын

BROOOO THANKS SO MUCH

@swiftphoenix5660

2 жыл бұрын

i did the solution from this video and it only worked for about 30 minutes but after trying your solution it seems to work completely and without any tape

@aRandomDuck.

2 жыл бұрын

Top of the switch, in what way?

@Norrecito

2 жыл бұрын

@@aRandomDuck. the goal is to get the contact cleaner inside the microswitch. If you spray it from the side which pushes in, the contact cleaner will eventually make it inside the switch if you keep pressing it.

@aRandomDuck.

2 жыл бұрын

@@Norrecito is it OK if I pull down lt and put it in through that gap?

Thank you soooo much. This worked for me. The only thing i did differently was i added more layers of tape. You added 2 but i added 5 because my tape was really thin. Thank you again. You just saved me from buying another controller

I was looking at resoldering a new switch last night but this morning found your video! I'll definitely be trying this first as my controller issue is identical. Great Vid 👍👌 It worked!! Thank you:)

imma be 100% honest here, ive been having issues with destiny not registering my melee but this helped completely, this will forever be saved to my playlist, rock on

Clear, concise, straight to the point. Worked like a charm. Also the security bit is a Torx, size TR9.

@MusicMan4u

2 жыл бұрын

Where can I get one?

@narutothethebigdaddy3378

2 жыл бұрын

It’s TR8

@narutothethebigdaddy3378

2 жыл бұрын

@@MusicMan4u any tool shop. It is TR8 not TR9

@MusicMan4u

2 жыл бұрын

@@narutothethebigdaddy3378 good to know thanks. Game stop doesn't want anyone to know this

@atoureshandle

Жыл бұрын

​@@MusicMan4u its actually the t9h I have it

3 layers later and i am back in business! I was actualy surprised at how well it worked, thank you!

This seems to have worked for me, so far so good, thank you mate.

Thank you sooo much for this video. Once you mentioned the blowing part, it magically started working.

oh man ,thanks! Blowing the controller hard worked for me. Damn. I was one second to open all the shit up. haha

Thank you, I was thinking about buying a new button and soldering it in, but this is going to save me a lot of time and effort :)

Thanks for the guide. My LB button was broken, I had to pry off the pointy end (the bit that you taped) and superglue it and it's working fine now. Opening the backside of the handles was the most difficult part.

Thank you so much I blowed into the little cavity thing and now it works your a legend and just earned a sub 🐐

God bless you, my dude. The thing that bugs me is why Microsoft decided to go with such a cheap materials for the bumpers, its unacceptable.

@organicburger7818

3 жыл бұрын

Yeah man but the controllers are cheap just get an elite for high quality pay more you get more.

@nicebro.1546

3 жыл бұрын

Theres a controller with rgb Lights with high quality bumpers called spectra

@brettg9481

Жыл бұрын

It's truly a joke. I have probably had fifteen different controllers. I will just fix them from now on.

I didn’t even know blowing into the bumpers was a method so I tried it and now it works! Thank you

@davematulessy1208

3 жыл бұрын

I did the same now it's broken again

@mikeys279

3 жыл бұрын

@@davematulessy1208lmao

Bought a button kit with an included t8 security screwdriver from Amazon and fixed my Xbox controller thanks to this video. Amazing. Thanks so much.

This control is quite expensive and they dare make it so defective. The number of views here demonstrate this is a common issue. Thank you for the instructions.

Because the quarantine I play MHW a lot and my rb started to be like this, and thanks for this video so I can mod it!!

@Benny_B0O0

3 жыл бұрын

I came back to mhw also, such a great game

Thank you! I've gone through 3 Xbox controllers in the last 6 months because I use the right bumper to shoot in FPS games instead of the right trigger, and the right bumper doesn't last more than a couple months. This seems to have fixed the issue for now! Hopefully Microsoft can make a higher quality controller next time around...

@trippybruh1592

3 жыл бұрын

I know the feeling it pisses me off! My 360 controllers bumpers still work to this day but Xbox one, NOOOOOOOOO

I was so sad my new control wasn’t working. You mentioned the blowing method and I gave it a try. Immediately worked. THANK YOU!!!🎉

I bought my XBOX back in 2019, as a BD present, but after finding this controller issue, I couldn't continue playing in my XBOX, until now! Thank you!

This worked, thanks. 2 strips of electrical tape exactly. I already owned a security torx screwdriver from when I changed my analog sticks to metal ones 😁.

@JoseSanchez-wr7xh

3 жыл бұрын

You controlldr still working with the tape?

@ubermesch4456

3 жыл бұрын

@@JoseSanchez-wr7xh Fix gave out maybe about a month ago.

@currybruv

3 жыл бұрын

@@ubermesch4456 so it lasted a good 6 months?

I did this and found out that my left back button was broken. I did order the button on amazon. Thank you.

Thank you for the vid, the blowing part worked for me! 👍

Thanks mate! You safed me from buying an new controller.. Very very nice video it was very easy to understand, Well done:)

Thx for this video, I can’t tell you how many times I’ve died in modern warfare because I couldn’t Stim myself😂

@alienman2540

3 жыл бұрын

Mines jump. But just as essential lol. I play bumper jumper tactical. Game changer

@dylancrampton5273

3 жыл бұрын

@@alienman2540 dude same it works so much better

@khahlis

3 жыл бұрын

my rb is shoot, i’ve lost so many fights cause of this

You’re a blessing I was about to buy a new controller. I couldn’t find any other videos which didn’t involve buying new parts thank you :P

@FuadPhenomenon

4 жыл бұрын

:))

I had the same problem but when I saw your video it fixed for me (THANK YOU)

When I open my controller up the pin on the lb was snapped so I super glued it back on and it worked a treat! Great video btw

I thought this was a joke but I tried it and it worked

I'll definitely do this when i get the screwdriver. Thank you!

@patrickbateman9897

3 жыл бұрын

RedLine you so not need a screwdriver all you need is the floor and a good Throwing arm boom open

@bruhmoment3098

3 жыл бұрын

@@patrickbateman9897 lol

@alinluca3436

2 жыл бұрын

What type of screwdriver is that?

@RedLineYL

2 жыл бұрын

@@alinluca3436 Torx T8H

Thanks dude! Did this and now they work even better

Great video, it worked perfectly for me. Thanks!

Blowing in between....what an easy fix I´ve been struggling with it for months. Thanks pal. I didn´t have to take it appart

@kandre932

Жыл бұрын

Same here lol, can’t believe it worked

Thanks man! You are AMAZING! I play FIFA too so the defender switching was a nightmare! The only downside it that the clicking sound is considerably muted, but that's fine for me.

THANK U SOOOO MUCH! It works for my controller, I was so scared to repair it cause it's an special edition from Gear of War but I saw your vid & did it, thank u again, you're awesome!

I love you the blowing method was the way thank youuuu bro😭❤️

thanks a lot it works !!

Thanks so so so much it is working Again apart the shell on the back of my controller is a bit loose is that me being faulty putting it back together or is it possibly one of the plastic parts of the shell

my right toggle was not working. I did the blow method and it worked. Thank you. You save me from getting another controller!

Oh man! THANK YOU SOOO MUCH! Your method saved my controller. I needed 3 layers of tape.

Thank you very much, this seriously helped me out alot. It fixed my brothers controller whose bumpers went from being unusable to working about 80% of the time.

Bro I was about to buy my third controller but u safe my day.

@joeward96

3 жыл бұрын

Same man. Problem was so annoying. At least now I don't have to waste more money on a new 1.

@spdr2789

3 жыл бұрын

Ikr

Thanks a lot. This seems to be working for now. You saved me a lot of money on the new controller

Dude i didnt know of the blowing method just you mentioning that worked for me so thank you im sure your other method is just as good.

Actually i dont know anything about this should i try this my rb is not registering properly.

@sandyyy6183

4 жыл бұрын

Same did u figure it out

@marcot4395

4 жыл бұрын

Karl what I did is pull back the LT/RT and then blow into the RB/LB. Somehow then both of this worked

@xotru9690

4 жыл бұрын

@@marcot4395 did work for me

@patrickredmond1985

4 жыл бұрын

MarcoT43 blow ?

@kannonpayne2614

3 жыл бұрын

Try to blow into it. It help actually blow real hard hold down RT cause my RB wasn’t working either but if u blow real hard into it it should work

I opened up mine and found that the piece that you put tape over had completely broken, all I did was open up my old controller that had working bumpers and switched them and I was ready to go

Thank you so much! God bless you! Just the blowing worked for me👍🏻👍🏻👍🏻

Thanks for taking the time to make this vid!

Soooo how are you supposed to take out the battery pack of the xbox elite s2 😂😂 I'm on my 2nd one the 1st one had a bad lb now my rb on my 2nd one is broken and I never slam my controller or nothing

@Lskiii

4 жыл бұрын

fr this is annoying

Blowing worked for a lol but the it stopped working again

@gorbFN

3 жыл бұрын

Same

@kleinmorettifan

3 жыл бұрын

Where did he talk about blowing

@dq8262

3 жыл бұрын

@@kleinmorettifan Start of the video

@kleinmorettifan

3 жыл бұрын

@@dq8262 thanks

you have saved me, my life, and my beloved blue controller. I will be forever grateful.

Wow! That totally fixed my problem. Thank you so much!

I blew it worked lol 😂

@FuadPhenomenon

4 жыл бұрын

Hahaaa yes thats the first thing one should try

I'm scared to try this

You’re a genius. It’s logical thinking and i was able to fix my controller. Saved me $50 bucks to buy a new one!

It worked! Thank you! BTW if anyone is wondering, the screwdriver bit you need is a T8.

Thank you so much I tried the blowing method a few times and got my rb button back working! You da man !!!

I can't believe it work!! thank you so much :D

Awesome stuff. I had to double the tape because a single piece didn't work but now it's fully working again 🙌

Thxs so much! I was able to fix my LB button on my series X controller even though it was my first time doing any repairs like this. Works perfect now!