How to Fix Trigger & Bumper Buttons on Xbox Controller | LT RT RB LB Shoulder Sticking Stuck Repair
Ойындар
If you have a modern Xbox controller (Xbox One, Series X or S) you may be experiencing issues with the LT, RT, RB, and LB buttons, such as not registering a press, stuck in down position (jammed), stuck in up position, one button activates the other, too easily activates, activates on it’s own, loose button, makes a noise, limited bounce, goes to 100% to easily, never reaches 100%. This tutorial goes through a 8 methods to try in order to fix it, which range from cleaning, to inspecting the magnets inside.
How to test an Xbox Controller for Issues:
• How to Test an Xbox Co...
How to Remove the Xbox Series X Ring Stand Base:
• How to Remove the Xbox...
How to Set Up "Break Reminders" on Xbox One, Series X/S:
• How to Set Up "Break R...
How to Save Battery on an Xbox Controller:
• How to Save Battery Du...
How to Fix Analog Drift on XBOX Series X/S Controller:
• How to Fix Analog Drif...
..............................................................................................
Patreon:
/ kevinsthreechannels
Product Links:
Replacement Trigger: amzn.to/3jWukyv
Replacement Bumper: amzn.to/3DHfBOl
Precision Screwdriver Set: amzn.to/3k5Do49
LB and RB Button Replacement Kit: amzn.to/3ZY8me9
Xbox One Replacement Part Kit: amzn.to/446wBsq
Electric Duster: amzn.to/3lwoRyR
Replacement Battery Covers: amzn.to/3XBUYKS
Xbox Core Wireless Controller - Robot White: amzn.to/3xok5Gr
Xbox Elite Wireless Controller Series 2 White: amzn.to/3lqms8P
Rechargeable Battery Pack: amzn.to/3E7RSrh
Kinivo HDMI Switch: amzn.to/3GhtVhn
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
..............................................................................................
#xbox #xboxseriesx
Пікірлер: 593
Here are some product links relevant to the video: Replacement Trigger: amzn.to/3jWukyv Replacement Bumper: amzn.to/3DHfBOl Precision Screwdriver Set: amzn.to/3k5Do49 LB and RB Button Replacement Kit: amzn.to/3ZY8me9 Electric Duster: amzn.to/3lwoRyR Replacement Battery Covers: amzn.to/3XBUYKS Rechargeable Battery Pack: amzn.to/3E7RSrh Xbox Core Wireless Controller - Robot White: amzn.to/3xok5Gr Kinivo HDMI Switch: amzn.to/3GhtVhn *All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
@Junior-yv3du
Жыл бұрын
W
@RadiantYT2K
6 күн бұрын
Absolutely bogus and ridiculous. They don't work for me.
A detailed and handy guide. Was able to get all 3 covers off and count figure out how to get better access to the bumper. Your video helped with that. The issue I had was the RB rubbing against the RT. When the trigger was even slightly pressed, the RB would pop put and work fine. Ended up sticking a very tiny piece of tape between the two to reduce friction, and it worked.
7:03 Easily this segment was such a big help! My right trigger had it to where it pressed but it felt different/broken. Found out that the foam pad was misaligned, not even missing, and was able to fix it! Thanks again man!
@moukhu
2 ай бұрын
same here just cleaned and re put it
Thanks! My left bumper stopped working. I got down to the last step, it was surprisingly easy with your instructions. Turns out the plastic tip that connects the bumper to the white circular little post was loose, it snapped off when touched. Ordered a new part for $10 for 1 day shipping with Amazon and fixed it in 5 minutes. Much appreciated!
@cosmicdive
5 ай бұрын
I had the same situation but when I replaced the piece the controller didn't turn on anymore. I'm not sure why but it sucks tbh
fixed my RT! i had to take it apart but only the first pannel you removed. some sticky black stuff was all over wherw the trigger makes contact when pressed. cleaned it up with alcohol! it works!! this was a brand new out of the box controller so THANK YOU SO MUCH! i will recommend this vid to others, too! thank youuu!!!!
It worked! I tried a lot of tutorials, but this one has to be the best one to finally break my controller
@Boognish_
Жыл бұрын
Lol
@HowToX
Жыл бұрын
Glad it worked!
@fredoran
10 ай бұрын
@@HowToXthink you might need to re read that
@Mr-kg5ij
9 ай бұрын
Same 2 broken controllers now!🙂
@mattswailes5456
8 ай бұрын
😂
Don't normally like videos but, because of how descriptive and helpful you were within the tutorial it was well deserved. Even tips about how to learn from tutorials, like watching the full segment before trying to do it along with you. Edit: Wow, thank's. Just saved me £50 buying a new one, my LB button wasn't working, turned out the little plastic sharp bit that presses the button snapped off, I found it and superglued it back on and it works a charm. Thanks so much mate!
My series s controller kept pressing both the triggers on its own. So I did the first method, updated my controller, and the issue stopped! I thank you from the bottom of my heart, because I have been dealing with this issue for about a year and a half. Really man, I appreciate the help!
@HowToX
10 ай бұрын
Cool. Glad you can still use the controller.
Thank you. Trigger has been sticking forever. I found that a thin piece of plastic like a thin zip tie works well in place of cardboard.
my left trigger isn’t stuck, but no matter what i do it is always pressed down and activating without me even touching it
@HowToX
Жыл бұрын
Ok, do the things in the video if you haven't already.
@justicecordeiro7565
Жыл бұрын
Same here buddy waste money on a new controller just for it to glitch on me
@toastyboy1295
Жыл бұрын
@@justicecordeiro7565 take it apart look for broken/stuck pieces
@thekingofthepatriots9-498
Жыл бұрын
@@HowToX Hi my friend do my name is Yamil, I got a drifting problem on my controller and I want to know if you can fix it for me.
@anthonymedvescek7066
Жыл бұрын
Well for me I found out the part of the bumper there a kinda plastic piece that pokes the number activated and that broke off
I've been watching your gaming channel for some time. I needed to look up a vid for LB/RB button replacements and this video came up and I recognized your voice lol.
Bro this video was a god send. Both of my triggers were stuck almost like they had been jammed from being dropped. I don't know how but the cardboard trick fixed it immediately! Thank you for making this video!
Thanks for those fixes. The first simple Fix worked already for me since "LB BUTTON" was always Pressed at my controller.
Thanks a lot! Using this tutorial i found out whats wrong with my RB, it was broken little plastic stick inside which is pressing the switch, i didn't know how to look inside, now i just bought the part and gonna replace the old, really aprecciate it
@Moi________
Жыл бұрын
What method have you try ?
@RKDriver
10 ай бұрын
These have a major design flaw by MS. They're way too weak for the heavy use they get like the constant parrying in an RPG game.
This is one of the best demonstration videos ive ever seen Infact maybe the best. Hope ur keeping it up dude
I used a cork board push pin to poke into the trigger pin, to release the trigger and spring assembly. Not as tricky as it looks really. Great video and helped out a lot, thanks
Holy crap! The first one seriously worked in thirty seconds total and it’s been sticking since ‘Nam!!! Thank you!!!!
Thanks for the video, I got it taken apart and put back together but my issue was not fixed (the bumpers are broken) so I promptly put the controller through the wall, but this video was a great help so thank you for that.
I just wanted to say that you rock, dude! Your video helped me a lot! I had dust built up and had to clean around the buttons like your vid suggested. Happy New Year and keep on rockin' dude!
I thought my controller was gonna have a some internal problem that would be a hassle to fix. But method 1 did the trick in a couple seconds. Thank you!
The carton method worked like magic. So simple yet effective! Thx!!
Just wanted to show appreciation, I tried the straw method it worked first time thanks mate
Super helpful. Thank you! I had to remove that sticky pad at the end of the right trigger's travel. It was all gummy and not letting the trigger release which is really bad for throttle control in racing games.
Thanks! I couldn't open the controller since i didn't have the screwdriver set for step 5, so i just pulled some tape and put it under the trigger and voila it's fixed.
Wow, thank you so much! The first method already fixed my stuck bumper - this is so great! I was ready to buy a new controller!
Thanks dude , the first method worked for me . Now my controller works like new
Thank you so much! Usually videos like this suck bung hole cuz they rarely fix my specific issues, but this video helped me fix my RB button with the cardboard method and I guess there was just debris in my controller
Definitely the best how to guide for the trigger and stick drift thx.
Updated my controller and it started working. Thank you!
1st method worked for my bumper and the 2nd method worked for my A button. Greatly appreciated!
This video managed to help me fix everything wrong with my controller both of my sticks were drifting and my RB was clicking itself I don’t have drift and my bumper is no longer clicking itself I genuinely have no clue what I did most helpful on the Internet take my sub
My left bumper wasn't working tried to clean it first but eventually had to take apart the controller and put in a piece of electrical tape. Amazing recovery of the button and truly works thanks.
So I was able to pull off the panel with my hand. And there was sticky gunk in there. Took a little alcohol swab with a toothpick and my controller is as good as new! Thank you so much.
I tried all the method it dint work, but when i slam it to the ground suddenly it started working
@lilZap2600prodz
26 күн бұрын
I did that and it worked 😂
@Pro-jelly
21 күн бұрын
Why did this work
This video was so helpful for my problem. Thank you for sharing your experience 💯. My issue was solved by the straw/compressed air. My rb button was acting weirdly. It would click or feel normal when i press it but sometimes the button would be held down even though i released the rb button.
Literally the first method fixed the problem. Thanks
Thanks for this. My LB stopped working and I had no idea why. Bought a T8 security screwdriver & disassembled the controller thanks to your instructions. Finally saw what was wrong after 15mins. The plastic protrusion on the casing broke off, so that's why the LB button wouldn't click.
@ayzee5169
4 ай бұрын
Did you figure out how to fix it? I'm waiting for my torx screwdrivers to arrive so haven't actually disassembled the controller yet but I bet my life this is gonna be exactly the issue
@SekhmetScion
4 ай бұрын
@@ayzee5169Yeah, I just replaced the bumpers. It's one single piece of the case. Just have to make sure you order the correct one. You can tell by how it's split from the plastic piece in the middle (over the sync button). One has a diagonal separation, the other is straight. It's important because the protrustion that goes inside to click the bumpers is different (one style is much thinner than the other).
Thanks for showing us this, my right trigger was sticking every time it was pressed, the problem appeared to be a loose cushion for the trigger and with this being loose it’s left a residue of adhesive hence the sticking.. I’ve cleaned this off and applied a new cushion (tiny piece of sponge 🧽) with😅.. work perfectly 🎉… thanks for this video much appreciated 😁👍
@kylemorgan7961
11 ай бұрын
Thanks! That's what wrong with mine. I'll have to get some new sponges.
@lukebrown9837
11 ай бұрын
@@kylemorgan7961 to this day I’m still having issues with this design it’s shocking, the trigger works fine still so I’d recommend a little piece of sponge 🧽 tiny tiny 🤣
Very helpfull! It was easy to see the improvement while using the online gamepad tester.
You actually helped me fix my right bumber,appreciate it gang🙏🏽
thank you! the first method was an easy solution. the LB button was being too sensitive, but I guess some dirt was just keeping it too held down.
Thabks for this, my lb button was not working and when i took that piece off, i instantly saw its piece that pushes the button in was broken, ive ordered a new one know so hopefully its all i need, but thanks for teaching me how to take apart my controller👍
I finally managed to remove the piece that was jammed in my LT button. Thank you.
My bumber panel was broken!! :D Instead of buying a new controller I can just buy a replacement! Awesome, thanks for the video and links!
BRO I WAS SO WORRIED THINKING I WOULD HAVE TO GET A NEW CONTROLLER BUT U JUST SAVED ME HECKA! I ONLY NEED THE FIRST STEP TOOO
I was able to fix my issue with the first few tips, thanks! I used a cereal box to make a pick, and compressed air to help clean things out, then a firmware update for good measure. You did a great job walking through the process and explaining the risks and reasons for taking each step.
@pbizzy333
6 ай бұрын
how i’m using a cereal box too
Thanks man! I figured out that one of the tabs for RB is getting ready to break off
Thank you so much the first one helped a ton❤
Even tho I havent tried yet Im very grateful you have shown so many alternatives
appreciate ur video. I kinda skipped a bit since i had already attempted to update controller. had a broken piece of plastic in there. luckily i own plastic bond lol. waiting on it to cure now!
ty so much bro, just fixed the left bumper, just had to take all covers and clean... u the best!
thanks so much bro! i got a brand new controller and after just a few uses the left bumper stopped working, i tried the cardboard method and straw method and its working again
THANK YOU... for me... This also works for Stick Drift.... I blew into the cracks on the joysticks.
Thank you!!! I opened up my controller to find the tooth extending down from the right bumper, that pushes on the internal white button, the tooth had snapped off. So I ordered a new bumper set for $10 and replaced it and… voila! Saved myself $50! Many thanks!
just repeared a remot thanks to your video, i was gonna threw it away, big big thank you, you made my day. Now lets play again ;)
My lb clicks but don't work I'm not sure if a button inside slipped from the lb or if it blew out. All other buttons work perfect.
@Khoyzzz
3 ай бұрын
That's my problem (I think, not quite sure what u mean). But when I press it, it doesn't feel like the other bumber. It's like loose ig. I have to like hit it on my desk once or twice to get it too work. Then it'll stop working again.
The first trick helped thank you!
Thank you so much! I used the cardboard/Vacuum method and it worked.
This video was very helpful, much appreciated
Thank you so much I got my right bumper to work because of this video
This helped me with my loose LT switch, thanks!
Holy shit and here I was, sad that my limited edition CP2077 controller was going to have to be retired and I was saved by a simple piece of cardboard. You've just saved me £100 and kept my baby running.
Excellent educational video! Very detailed. Thank you!
@HowToX
Жыл бұрын
Thanks for watching!
@viviananuforo3971
Жыл бұрын
Hi
@viviananuforo3971
Жыл бұрын
Excellent video
Dude, eye opening video, I just had to blow into my controller and it worked 😅. Thank you!!!
software update worked (method 4) like magic! thank you sir!
I tried the 2 methods and it worked thanks my bro
thank you for the info buddy, very helpful!
saved, homeboy you saved me a lot of time with the cardboard trick
Cant lie bro your first suggestion with the cardboard actually just caused my bumper to stop working entirely rather then it only working sometimes like it did before
Thank you man for all you do i guess I forgot to clean it
THANK YOU SO MUCH. MY R1 HAS BEEN BROKEN FOR 3 DAY. Finally I can play rainbow six seige
Thanks man you helped me fix my controller 🎁
I genuinely love you
oh man what a relief, i was barely getting into minute 2 and suddenly it was already fixed before we even moved on... ohhhh!!!
I love you so much, just fixed my elite controller
1st method has done the trick. thanks a lot!
Method 1 work just fine for me tnx bro !!
Thank you for that! My rt button was stuck so I did the cardboard meathod.
Bro this actually worked the first one worked Ty some much bro
THANK U SO MUCH OMG I WAS CRYING THEN I DDI UR METHOED AND IT HELPED TYSMMMMMMMM!!!!!
Fantastic video!!!
I couldn’t fix my controller. But a good video is a good video. Thank you for your service, Mr. HowtoX
method one worked, thanks for saving me the time, the service tech in me just wanted to start tearing the controller apart
I really want to thank you because u saved me some money
@HowToX
Жыл бұрын
Glad it helped
Thanks for the help I yanked it out and now it’s bent but it’s works
Very nice video very informative
Wanted to say thank you. The cardboard trick fixed my $250.00 Xbox controller. Thought man I haven’t barely used it as I play on a full sim. I only play race games or sim race games.
dude many thanks i smash it and got a brand new controller ❤️
Bro your 1st method messed up my wired controller and no the button is broken and won’t work thanks a lot!!❤
thanks for the video. found my problem right away when u pulled of that cover with lb and rb trigger on it. that little plastick thing broke on mine so it dose not hit the contact... your Video helped alot thank u
@Arrowwoods
Жыл бұрын
How did you fix this problem?
@justinfourtwenty8655
Жыл бұрын
@@Arrowwoods i orderd the plastik piece from amazon, where the LB and RB is on so i can switch it. My problem was a little broken plastik piece so i was able to just change it out. i mean its not here yet but it wil 100% fix it xD 10:14 i m,ean this piece
@torrvic1156
Жыл бұрын
Have absolutely the same issue. Tried to use a glue but it helped only for two weeks. Better to have this spare LB RB buttons.
@justinfourtwenty8655
Жыл бұрын
@@torrvic1156 yeah tragic little piece to brake off xD i bougth a spare one from ebay its not an original but its fits 99% and works great, paid like 2-3 euros for it but its an easy fix u dont need a 50-60 euro new cortoller xD
@torrvic1156
Жыл бұрын
@@justinfourtwenty8655 honestly I bought the second controller for such cases but I’ll definitely repair the old one myself.
Thank you! Rolling the paper and blowing worked perfectly!!! Now I can use those buttons lol
Very helpful, thank you for the video. I'm able to fix sticking RT button by following step 5.
@HowToX
Жыл бұрын
Excellent!
Thank you so much brother nearly went out and bought a new one
The update method worked thank you
This happens to all my controllers this was my last one my heart dropped so thank you
You are a life saver the cardboard method worked
The cardboard trick helped me thank you 🙏
Was super confused my RB was only working half the time And was making a very sifferent sound then the other, somehow fixed it after dismantling and blowing into it. not clickbait and very helpfull thankyou!!
Thank you this helped a lot
My right shoulder button felt a bit crusty and barely responsive on the outer side. Did the dry paper, wet paper, blowing and driver update and now it feels normal again. 👌
@HowToX
Жыл бұрын
Awesome