This is easily the best guide on KZread for these older white Xboxes. Thanks man you are the best 👍

@uFixTek

Күн бұрын

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

Awesome guide! Helped me finish my 10+ hour journey in attempting to fix my grandmas xbox dvd drive and give it a good clean+ new thermal paste.

@milymilo

Жыл бұрын

If anyones curious I wasnt able to fix the dvd drive and Ill prob have to replace it, but I dissambled and applied new thermal paste without the console red ringing for my first time, so hey I'd say thats a win.

@uFixTek

Жыл бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P What is the problem with your DVD drive my friend , give me as much as detail you can. Should you have any further questions or requests in the future, please don't hesitate to ask me.

Just wanted to thank you for these videos! Very straightforward and clear on what to do. I already used your video to replace the thermal paste on my PS3 Slim and now Xbox 360. I hit the jackpot and got a Kronos GPU motherboard! The best model for the 360.

@uFixTek

5 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P im glad that my videos are helping people out🫠 Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

Awesome! Thank you so much. I serviced my ps3 slim with the help of your video. Now i will do to my 360 too.

@uFixTek

3 жыл бұрын

Great! im glad that my vids are helping people out :P if you need any help let me know :) if you wish to support the channel you can LIKE or SUB or both :P

Awesome guide thanks for posting. Removing the clamps holding the heat sink was the mos difficult. The plastic shell was delicate some parts chip away as I was removing it. I guess because of age. Really appreciate the take apart and put back together. Most videos would end it after the break down and just say “ just do it in reverse “ then video end lol😆

@uFixTek

Жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P yes, all my videos are a-z and z-a :) , i know how frustrating it can be trying to put it back. if you have any question or request in the future feel free to ask me.

Great tutorial! Very clear and concise. I wish I watched this before opening up my console

@uFixTek

2 жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

@Adam-rt7lp

2 жыл бұрын

@@uFixTek Thanks, already done, can u please make a video opening up a xbox 360 slim? All the videos I have seen they break the clips.

@uFixTek

2 жыл бұрын

@@Adam-rt7lp i have few old videos horrible audio :( see if any of them is any help else i make one for you: kzread.info/dash/bejne/fYyYo5aCo6q2c84.html kzread.info/dash/bejne/pKWNm7BugpupXbg.html kzread.info/dash/bejne/hWWG1NaskbrNqJs.html

thanks for making this video its amazing explained everything really well i really appreciate you showing putting it back together great stuff

@uFixTek

Жыл бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.

I did it! Thanks my dude! Now my 360 has Thermal Grizzly Kryonaut paste in it 😄

@uFixTek

Жыл бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me.

Excellent video. Thank you!

@uFixTek

3 ай бұрын

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

Bro rockin the best 360 revision ever made, the Tonasket

@uFixTek

3 ай бұрын

they are the best 360 reversions that was made. 🍻cheers

Shown in great detail. With your exact instructions, any child can change the thermal paste! Well done!

@uFixTek

2 жыл бұрын

You're welcome 😊 Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request feel free to ask my anytime my friend :) for the same reason i don't skip any opening parts of the video.

@callumbmx9763

2 жыл бұрын

Yeah I'm 13 I repasted 2 original xboxes and a slim 360. Planning on doing my phat soon Edit did my phat today... I also discovered. It had a bolt mod all this time :(

@Hessi

2 жыл бұрын

@@callumbmx9763 Great! I have to fix my 360, too.

@imtree834

2 жыл бұрын

@@callumbmx9763 good lord I struggled with this and I'm 20, keep it up you'll be able to make a career out of this type of stuff

@rv_jumpshotz1139

Күн бұрын

@@callumbmx9763How’s the bolt mod holding up? Hopefully no red ring

Nice! This will come in handy when I do the RGH 3 mod and DVD belt replacement

@uFixTek

3 ай бұрын

It's truly a pleasure, my friend. 😊I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

Thank you man. Very nice video it helped me a lot

@uFixTek

4 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

Thank you so much for this video my friend ❤

@uFixTek

11 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me.🍻

my xbox i running so much smoother all the thanks to you

@uFixTek

Жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Sadly I didn't find this tutorial before I scratched the motherboard and cut my finger rather badly... but I managed to get the heatsinks off now so that's a win lol. Very good video showing what to do (^-^)

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your adventure :P, but at least now you got a bit of your own experience :) if you have any question or request in the future feel free to ask me.

@curtis8516

Жыл бұрын

I literally did the same thing with the 360 slim. I slipped releasing the clamps with a screwdriver and ripped/cut deep into my skin. I needed stitches.

Great tutorial. Thanks

@uFixTek

Жыл бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.

May Allah swt guide you too the right path. Thanks very much for this video helped me out !!

@uFixTek

Жыл бұрын

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

I see some people commenting their Xbox 360 is still freezing or getting RRoD. That is because if you have a motherboard prior to Jasper, the solder for the onboard chips is of poor quality and prone to cracking. You need to send the console off to get the onboard chips reballed. There are reballing services on eBay that will replace the chips with quality solder and is the permanent fix for RRoD. I have a Xenon (1st gen) motherboard that I sent off to be reballed, and I have replaced the heatsink with the improved one from falcon boards with fresh thermal paste, and fans set to 100%. It has not caused me problems in 14 years.

@uFixTek

Жыл бұрын

yes The RRoD can be fixed and prevented by replacing the thermal paste often, and this video is for repaste ONLY, not a 100% fix for RRoD. as you mentioned the the issue is from the solder balls under the GPU , because the chips are BGA designad chips. and it's not because of the bad quality solders, its because of bad quality heatsink that dries the solder balls to a point that creates a resistance or a crack because of over heating and cooling. we do reballing for the BGA chips in the store for our clients. also setting the fan speed to 100% its not a good idea : one for the dust buildup will be very fast and resulting to fan failure and over heating, i would recommend you ro set the fan to 70-75% with a help of a resistor, apart that it's very loud at 100% 🤣 i do appreciate the feedback and your support regarding the RRoD issue.

@JesseFleming1990

Жыл бұрын

@@uFixTek Delta fans can handle 100% SMC speed as is designed by target temps. You are thinking of a 9V mod which is a true 100% speed of the fan capabilities. That being said neither fan tweak should cause issues as long as the end user maintains proper sanitary practices such as the occasional compressed air blow out. Also the solder is ABSOLUTELY the problem on pre-jasper boards. Microsoft outsourced their lead-free solder formula for their production board which they needed at the 11th hour due to new environmental laws. It was later publicly announced both to investors and media in a post mortem that the lead free solder they were using caused cracking from rapid heating and cooling, something a proper factory formula or lead solder does not have issues with. The BGA chips were later downscaled and a new solder application was used in Jasper models onward. I love your tutorial here though. I was just putting the comment here for the other viewers that still can't figure out why they are not able to fix their systems after a nice fresh repaste :)

@uFixTek

Жыл бұрын

much appreciate all the info and support. there is so much marketing going into the laptops and consoles so they don't last longer as it's not profitable for the companies. they do have their own area for "by design make it don't last". it's profitable for us as repair centers but horrible for consumers. i been in this business for over 17 years and i could write a book on how they have progressed from making a good solid circuit to new modern horrible circuits that are made to fail. the best e.g is the chargers on TV consoles and laptops. back in the time they made power supply for consoles with extra overhead protection 30-40% they could hold a good about of high wave of voltage, but now they are going with exactly what they electronic agreement of every country and that's 5-8% over head. that's why they burn so easy. the same for laptops, they give you a laptop with a 4amp charger but they don't tell you that you need a 6amp if you want to run the laptop and if the battery is under 50%. the 4amp is good for when your battery if fully charged and 4am goes to run the board. but when the battery is low it requires over 4amp, therefore that starts to over heat the charger and soon later end up buying new one. BACK then 12years ago they would give you a PSU with truly designed to last. and this is only a fraction of how they design in purpose. air flow, components design, and heatsink clams (horrible pressure), horrible over voltage chips on high end laptops, and much more. - you are absolutely right, with keeping the you devices clean on regular bases. BUT 90% of my clients don't even know that they need to do service on the devices. i believe that there should be a paper READ ME , saying that you need to clean and repaste once in a year or so. just like when you get a car, change you god damn oil :P

Yo I just pulled one outta storage to give it some cleaning... the previous owner did.. well I found 2 penny's inside not loose but welded.

@uFixTek

2 жыл бұрын

ROFL .... i been in this business for over 18 years... i have see so many home made crap that the list would be enough to print a book.

Great video man, what should I do with the left over screws and parts after I put it back together?

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: Keep them and when you open next time try to find the place for them, most of the screws are not important :)

very usefull ty sir

@uFixTek

5 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

This helps since I have to repaste my Xenon.

@uFixTek

Жыл бұрын

You are welcome! Glad that it helped you 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.

I followed every single step and it worked flawlessly. Thank you very much for teaching us. Red ring has gone.

@uFixTek

9 ай бұрын

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P congrats on servicing your console my friend🍻 Should you have any questions or requests in the future, please don't hesitate to ask me.

Do I have to use thermal paste for the 360 or could I use what I have which is the pads (Arctic apt2560)?

@uFixTek

Жыл бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, PLEASE DO NOT use pads, it is important to note that using pads on the CPU is not recommended. Instead, you should apply a high-quality thermal paste to ensure proper heat dissipation. Failure to do so may result in negative consequences, such as system crashes and sudden power-offs. good paste: amzn.to/3oKUre8

Artic cleaner makes the thermal paste a lot easier, but isopropyl alcohol works too. I rarely RGH fats anymore, only one has crossed my desk in the last two years.

@uFixTek

Ай бұрын

Artic cleaner too expensive iso alcohol is much cheaper and can be used in many situations too, But if you got artic cleaner sure it is made for cleaning paste. cheers🍻

So much help my Xbox is running grate and no longer freezes

@uFixTek

2 жыл бұрын

You are welcome! Glad you got it serviced 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

Thanks for the video it helped me alot on my new 360 but after having put it all back together it seems I've made some kind of mistake and now the optical drive is loose inside the console? Is this normal? I flip the console upside down and hear/ see it coming out of and back into? (I hope) the place you/I left it before sealing it back up. I googled and asked on reddit and seems I've apparently done something wrong to do with the 6 5cm screws. Please help!

@uFixTek

Ай бұрын

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Regarding your question, don't worry about the DVD moving it is 100% ok, and nothing will happen, you may have not placed the drive correctly or tighten the long screws on the metal cover. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

Do all fat XBOX 360 HDMI cases like Falcon and Jasper differ? I've been looking for cases and while most descriptions for HDMI cases say they're for HDMI cases, they don't specify what motherboard they support, they're all generalised. So my question is: do non-Xenon fat HDMI cases differ at all?

@uFixTek

8 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, the xbox 360 the HDMI model the case is the same and none HDMI are the same.

Should the X-clamps move at all after they are inserted? Mine are moving quite a bit. I did try putting the screws back in to see what would happen and they stopped moving, but I don’t remember them moving at all during the disassembly even after I took the screws out. I also noticed in your video you mentioned tightening them with pliers after putting them back on after the repaste and I was wondering if this is what I should do.

@uFixTek

3 ай бұрын

🫠Regarding your question, if you placed the x-clamps it will have a wiggle room always, don't worry if your xclamp got hooked to the screw rods then just place the tray and screw it from other end and it will tight it self to the board.

@TheDisturbed558

3 ай бұрын

@@uFixTek Thanks!

@uFixTek

3 ай бұрын

my pleasure.

A somewhat breath of fresh air screw wise compared to the Wii, but I still managed to cut myself with the metal X's on the back. The X's were the only difficulty during disassembly.

@L_Bribus

Ай бұрын

Still top tier tutorial. Cheers

@uFixTek

Ай бұрын

It's my pleasure my friend.

I have a Jasper Arcade with swapped bottom and top grey shells from 2005-2006 Xbox 360s. However, the power button doesn't click now. The original Arcade bottom and top plates are broken so I can't troubleshoot but the power button was clicking previously. Do these not fit or did I do something wrong?

@uFixTek

3 ай бұрын

the plastic is not reaching the button to be able to push they are different heights.

@DrWiki-po1hk

3 ай бұрын

@@uFixTekDo you recommend I get a new faceplate or is it an internal problem?

My xbox 360 fat with jasper cpu is 16 years old and still wokrs perfectly, should I replace the paste or not

@uFixTek

Жыл бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, oh boi i would highly recommend you to open and clean and repaste, here is a video for those who dont clean: kzread.info/dash/bejne/qWqZmbWLpcubls4.html

Can I wipe off old thermal grease on the CPU/GPU the same way I wipe thermal grease off computer processors, by using a lint free cloth and isopropyl alcohol?

@uFixTek

4 ай бұрын

Regarding your question, yes you can that is totally 100% safe and the proper way of doing it. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

@robertyu6691

4 ай бұрын

@@uFixTek Is it REALLY safe to use Q-tips to clean away paste on the space surrounding the processor and the GPU?

Just hit me the other day that my OG 360 is from 2007 and also kinda a computer that I should probably repaste lmao

@uFixTek

9 ай бұрын

Oh boy, you're in for a surprise!🫠🧹

If my XBOX 360 is modded with an RGH, can I still handle the cleaning the same way?

@uFixTek

8 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, yes my friend it will be fine and no need to worry. Should you have any further questions or requests in the future, please don't hesitate to ask me.

I did this with a Jasper Mobo, which worked before and then it got three flashing red lights with error code 0002, I dont know what to do now.

the two core is gpu or cpu?

@uFixTek

11 ай бұрын

CPU GPU is a dedicated BGA chip

Are the fans intake or exhaust ?

@uFixTek

3 ай бұрын

🫠Regarding your question, the fan is exhaust , pushes the air out to back. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

@M.r_Azam

3 ай бұрын

@@uFixTek thanks 👍

@uFixTek

3 ай бұрын

It's my pleasure my friend.

Hi I have xbox 360 slim when I play game. It freeze

@uFixTek

Жыл бұрын

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: open it up and repaste with a good quality thermal paste. amzn.to/3bScfxw

Writing back. When I tried to lift the tabs on the front section of my XBOX 360, they come off. Fortunately I was able to secure another fat XBOX 360 case, but how should I proceed in removing the XBOX 360 tabs in the front this time around?

@uFixTek

8 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, it all depends the plastic if it is very old and dry they tend to break but, try lifting them with a plastic card and it will slid over the clips.

@robertyu6691

8 ай бұрын

@@uFixTek Now that's something no one told me. What kind of plastic card?

@robertyu6691

8 ай бұрын

@@uFixTek Never mind, I've got plenty. Thank you.

@robertyu6691

8 ай бұрын

@@uFixTek Will something as flat as a plastic card break the tabs if handled incorrectly?

@uFixTek

8 ай бұрын

very hard just slide the card under clips and use it as ramp to slide the cover back.

Can I use something other than alcohol??

@uFixTek

10 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, we don't recommend anything that is not an 90%+ isopropyl alcohol you can damage the components if you do use other materials.

@basitaziz203

10 ай бұрын

@@uFixTek thank you

@uFixTek

10 ай бұрын

It's my pleasure my friend.

I've still got 2 working xenons :)

@uFixTek

11 ай бұрын

service them and keep them they are well made models.

@SkyStream-lu4jk

11 ай бұрын

@@uFixTek I heard they were made poorly?

@uFixTek

11 ай бұрын

they made two versions 2nd one was made with much better heatsink (with copper pipes), the 1st version had a horrible heatsink.

My xbox graphics temperature gets hot in 10 minutes and turns off,i hope this fixes it

@uFixTek

2 ай бұрын

it will for sure help, just make sure you use a good quality thermal paste. cheers🍻

@nancyarrietaymifamilia

2 ай бұрын

@@uFixTek thank you ,working great now

@uFixTek

2 ай бұрын

awesome 🫠👍

Don't use a screwdriver or any sharp tools while removing the heatsink because if you are not careful enough, you will scratch the motherboard's pattern (roads.) It is a pain in the ass fixing it. I made this mistake a long time ago. I will never forget it.

@uFixTek

2 жыл бұрын

i would agree with but the tools made for remove the X-Clamp are metal anyways, but as you say one must be very careful not scratching the pads on board. Just take your time doing it. amzn.to/355nmzz

@RomanPushin

2 жыл бұрын

@@uFixTek This tool is actually perfect for that! Thank you for sharing the link, by the way!

@uFixTek

2 жыл бұрын

@@RomanPushin my pleasure my friend, thank you for your feedback 🙂

@itsalexplayz2782

6 ай бұрын

I use an Allen bit for that job

My motherboard got scratched doing the x clamps

@uFixTek

13 күн бұрын

you have to be carefull when removing the xclams 😔 if the motherboard traces are not damaged then you should be fine

My x box only has one heat sink why

@uFixTek

6 ай бұрын

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, give me the exact xbox model (in the sticker that is at the back of the xbox) cheers🍻

@MichaelDaponte-fy9ji

6 ай бұрын

2005 model

@uFixTek

6 ай бұрын

on the sticker at the back of the console it says MODEL: XXXXX give me that number

i think i did something wrong i got red ring of death now

@uFixTek

5 ай бұрын

make sure you installed the x-clamp under the CPU correctly and you have not damaged any capacitors in the middle of the clamp.

Damet garm

@uFixTek

10 ай бұрын

प्रतिक्रिया के लिए आपका धन्यवाद।

@darius6112

10 ай бұрын

@@uFixTek Are you not Persian?

@uFixTek

10 ай бұрын

بله، دوست من

@darius6112

10 ай бұрын

@@uFixTek فکر کردم, پس چرا هندی جواب دادی 🤣

@uFixTek

10 ай бұрын

من نمی‌دانم، من داشتم فکر می‌کردم شما هندی هستید :)